SHARP CLE011 Technical Report

COLOR LASER PRINTER: JX-8200
Date
:
Feb. 24, 1998
No. : CLE-011
CHANGE CARRIED OUT IN THE NUMBER OF TEETH
OF THE GEARS IN THE BLACK TONER HOPPER.
1.Model Name: JX-8200 (for machines bound for all destinations)
2.General: A change in the number of teeth of two of the gears in the black toner hopper has been
carried out as a measure to increase the revolving speed of the gears so that the toner drops with greater efficiency. This action has been carried out as a measure to improve the effectiveness of the toner.
No.1 No.2
15T/18T Gear Hopper double-gear 15T gear helical Hopper helical gear
NGERH0142GCZZ NGERH0142GCZ1 NGERH0141GCZ1 NGERH0141GCZ2
15T/18T 15T/15T 15T 18T
0 0
-0.1
φ18 φ 15 φ 15 φ 18
White Black White Black
3.Action: From 1997 mid-October production.
-0.1
0
-0.1
0
-0.1
SHARP CORPORATION Printer and Scanner Division
1/2
Orange
C
4.Interchange: It is possible to use part no. 1 and part no. 2 described above together. The old parts
cannot be used in place of the new parts, but the new parts can be used in place of the old parts. Please use new parts when carrying out part replacement operations.
No.1 NGERH0142GCZZ NGERH0142GCZ1 No.2 NGERH0141GCZ1 NGERH0141GCZ2
2/2
Ref.
Model
No.
JX-8200 All
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
13 -22 NGERH0142GCZZ NGERH0142GCZ1 AE 15T/15T Gear
13 -23
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
NGERH0141GCZ1 NGERH0141GCZ2 AD 15T gear helical
Price rank
5. Interchangeable if replaced with same types of related parts in use.
6. Others.
Parts name
Effec-
tive
time
Mid-
’97/10
Inter-
change-
ability
Note
Loading...