SHARP CLE010 Technical Report

COLOR LASER PRINTER: JX-8200

Date

Feb. 24, 1998

A CHANGE HAS BEEN CARRIED OUT IN THE SHAPE OF THE

CUP RING SPRING IN THE MAIN FRAME R UNIT.

1.Model Name: JX-8200 (for machines bound for all destinations).

2.General: There was a possibility of the cup ring spring in the magnet roller drive cup ring of the

No. : CLE-010

main frame R unit becoming detached. As a measure to alleviate this problem, a change in the shape of two of the rings has been carried out. The inside diameter of the two rings has been decreased.

3.Action: From the 1st lot of 1997 October production.

Cup ring spring MSPRC0199GCZZ

There is a possibility of dislocation of this section of the part.

(Inside diameter)

SHARP CORPORATION Printer and Scanner Division

1/2

Orange

Ref.

Model

No.

JX-8200 All 6 -36 MSPRC0199GCZZ MSPRC0199GCZ1 AC Cup ring spring

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price rank

Parts name

Effec-

tive

time

1st lot ’97/10

Inter-

change-

ability

Note

2/2