COLOR LASER PRINTER: JX-8200
Date
:
Feb. 25, 1998
No. : CLE-005
CHANGE CARRIED OUT IN THE MAIN FRAME R ASSEMBLY.
1.Model Name: JX-8200 (for machines bound for all destinations).
2.General: The changes described below have been carried out in the main frame R assembly.
This action has been carried out as a measure to lower costs and improve
operationability.
<1> A change has been carried out in the tolerance of the φ8 portion of the pulley
96/24 shaft, which has been caulked, in the main frame R.
φ 8
0
-0.03
→
φ 8
-0.02
-0.05
<2> The tap on the tip of the pulley 96/24 shaft has been discontinued.
<3> The guide shaft which has been caulked in the main frame R has been
discontinued.
<4> Each of the various fixing screws have been discontinued.
<5> The bearing B of the slide plate upper has been discontinued.
3.Action: From the start of 1998 January production.
However, the change in the φ8 tolerance of the pulley 96/24 shaft has been carried
out from the start of 1997 November production.
SHARP CORPORATION Printer and Scanner Division
1/4
Orange
C
Item 1
Pulley 96/24 shaft
Upper frame stopper
Item 2
Item 4
Item 3
Caution 4
Insertion guide R Assy
2/4
Item 5
Main motor plate Assy
SUB 6
Caution 8
Short length
ISO screw
Item 4
Item 5
Attached A portion
(3 locations)
3/4
Ref.
Model
No.
JX-8200 All 4 -10 CFRM-0035GC02 CFRM-0035GC03 BB Main frame R
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Price
rank
Parts name
Effec-
tive
time
1st lot
’98/1
Inter-
change-
ability
1
Note
4/4
Loading...