SHARP CLE004 Technical Report

COLOR LASER PRINTER: JX-8200

Date

Feb. 24, 1998

No. : CLE-004

ADDITION OF A HOLE CARRIED OUT TO THE MAIN

MOTOR PLATE.

1.Model Name: JX-8200 (for machines bound for all destinations).

2.General: There was a possibility of operation misses caused by the tip of the boss of the tension

arm A in the main frame R unit coming in contact with the main motor plate. As a measure to alleviate this problem, the addition of a hole to the main motor plate has been carried out, providing an escape for the portion of the parts coming in contact with each other.

3.Action: Running change from 1997 October production.

Ref.

Model

No.

JX-8200 All 4 -59 LPLTM0228GCZ1 LPLTM0228GCZ2 AN Main motor plate

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

Added hole

Effec-

Price rank

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

tive

time

Mid-

’97/10

Inter-

change-

ability

Note

SHARP CORPORATION Printer and Scanner Division

Orange