SHARP ARE145 Technical Report
DIGITAL COPIER : AR-5125
Date
:
Mar. 2, 1999
1. MEASURE TO ALLEVIATE PROBLEMS OF CURLING OF THE COPY PAPER IN
THE FUSING UNIT.
2. CHANGE IN THE SHAPE OF THE REINFORCEMENT SHEET CARRIED OUT IN
THE REVERSION INNER SIDE PG. (TO IMPROVE OPERATIONABILITY)
3. MEASURE TO ALLEVIATE PROBLEMS OF CURLING OF THE COPY PAPER IN
THE PAPER DELIVERY REVERSION UNIT.
No. : ARE-145
1. Measure to alleviate problems of curling of the copy paper in the fusing unit.
1.Model Name: AR-5125 (only for machines bound for the 200 V series market destinations)
2.General: The addition of parts has been carried out to the fusing unit. This action has been
carried out as a measure to alleviate problems of curling of the copy paper during
double side copy operations. In addition, the upper CL roller has been discontinued as
a measure to alleviate problems of soiling of the upper heat roller, and in accordance
with this change the step screw and the spring have also been discontinued. Please
refer to the figures shown on the attached supplemental page for details concerning
both of these changes.
3.Action: From the 1st lot of 1998 October production.
SHARP CORPORATION Reprography Division
1/5
Green
C
Fusing UN EX220V, 240V (DUNTW6853FC34, 35)
The upper CL R SPR
MSPRC2395FCZZ
Discontinued.
Belt driven shaft
Fusing lower frame AS
CFRM-0748FC04
NSFTZ2549FCZZ
Note.
The upper CL roller SP
MSPRT1955FCZZ
The DV step screw M3
LX-BZ0373FCZZ
Belt tension shaft
NSFTZ2551FCZZ
Decurler frame
LFRM-1006FCZZ
Belt driven bearing
PCLR-0455FCZZ
Parallel pin ( ø2-10)
LPINS0133FCZZ
Decurler belt
NBLTH0322FCZZ
E6
XRESP60-08000
Fusing lower pawl attachment plate
LPLTM5652FCZZ
Discontinued
Belt driven shaft
NSFTZ2550FCZZ
M3 x 6 bind S tight screws
XHBSD30P06000
Discontinued
E4
XRESP40-06000
Bushing
NBRGM1040HCZZ
Decurler lead guide sheet
PSHEP4698FCZZ
Decurler lead guide AS
CGIDH1869FC01
Reversion inner side PG reinforcement sheet
PSHEP4697FCZZ
×2
E7
XRESP70-08000
FU drive bushin
NBRGP0478FCZZ
×2
×2
×6
×2
×5
2/5
Loading...