SHARP ARE138 Technical Report

DIGITAL COPIER : AR-5132

Date

:

Jan. 29, 1999

No. : ARE-138

1. ACTION TO ESTABLISH UNIFORMITY OF THE PAPER WINDER
PULLEY CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.

2. ADDITION OF A FUSING LOWER PAPER GUIDE CARRIED OUT AS
A MEASURE TO ALLEVIATE PROBLEMS OF COPY PAPER CURLING.

1. Action to establish uniformity of the paper winder pulley carried out as a measure to
improve productivity.

1.Model Name: AR-5132/5125

2.General: The paper winder pulley used in the optical unit of the models listed above has been

changed to the paper winder pulley used in other models as a measure to establish
uniformity. This action has been carried out as a measure to improve productivity.

3.Action: From the 1st lot of 1998 December production.

2. Addition of a fusing lower paper guide carried out as a measure to alleviate
problems of copy paper curling.

1.Model Name: * AR-5125 (Only for machines bound for the Australia, UK, SEEG markets)

2. General: Action to alleviate problems of copy paper curling has already been carried out in the

fusing unit, and in accordance with this action a fusing lower paper guide has been
attached to the transport base plate of the machine.

Paper delivery side

The fusing lower paper guide is
attached to the side face of the base
plate directly below the fusing unit.

Attachment standard

0

-1

SHARP CORPORATION Reprography Division

1/2

Green

C

3.Action: From the 1st lot of 1998 October production.

(From the start of the 200 V series mass production.)

Ref.

Model

No.

AR-5132

1

AR-5125

2 AR-5125 * ---- PGIDM1872FCZZ AG

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

4 -11

All

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

NPLYZ0172FCZ1 NPLYZ0359FCZZ AM Winder pulley

Price

5. Interchangeable if replaced with same types of
related parts in use.

6. Others.

Parts name

rank

Fusing lower
paper guide

Effec-

tive

time

1st lot
’98/12

1st lot 6 Q’ty:3

Inter-

change-

ability

1 Q’ty:2

Note

2/2