SHARP ARE127 Technical Report

DIGITAL COPIER : AR-280

Date

Dec. 1, 1998

No. : ARE-127

CHANGE IN THE AUXILIARY SHAFT AND CHANGE IN THE MATERIAL USED FOR THE BEARING CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.

1.Model Name: AR-280/285/335

2.General: A change has been carried out in the shape of the auxiliary shaft used in the vertical

transport unit. In addition, a change has also been carried out in the material used for the bearing. Both of the changes described above have been carried out as a measure to improve productivity.

Change carried out in the material of the bearing.

3.Action: From the 1st lot of 1998 December production.

Ref.

Model

No.

AR-280 AR-285 AR-335

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

22 -18 NSFTZ2463FCZZ NSFTZ2463FCZ1 AG Auxiliary shaft

All

22 -13

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

NBRGP0191FCZZ NBRGP0626FCZZ AC CG bearing

Change carried out in the length of the D shaped milling of the auxiliary shaft.

Effec-

Price

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

tive

time

1st lot '98/12

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green