![](/html/80/8006/8006057a59af5abf7dd0aa0f2de51e71c6eae3aad02057621286fb1da37cf609/bg1.png)
DIGITAL COPIER : AR-FN1
No. : ARE-125
[Service Information]
CORRECTION CARRIED OUT IN THE SERVICE
MANUAL FOR FINISHER MODEL AR-FN1.
1.Model Name: AR-FN1
2.General: The part code for the adjustment tool for the de-color unit was missing from the service
manual for the model listed above. The addition of the missing part code has been
carried out and is hereby reported.
3.Description: The addition of the part code for the adjustment tool, and the addition of the price rank
has been carried out on page 6-7, 8 of chapter "[6] Adjustments" of the service manual.
<1> Correction of the tables shown below has been carried out on page 6-7 as follows.
Setting value
Without paper feed hole de-color unit With paper feed hole de-color unit
Nipped volume 1.3 ± 0.1 0.5 ± 0.1
Old
New
Shaft outer measurements 20.8 21.6
Tool used
De-color toll R 1.3 De-color toll R 0.5
De-color toll F 1.3 De-color toll F 0.5
Setting value
Without paper feed hole de-color unit With paper feed hole de-color unit
Nipped volume 1.3 ± 0.1 0.5 ± 0.1
Shaft outer measurements 20.8 21.6
Tool used
De-color tool R 1.3
Part code: 0EUKOG0604L//
Price rank: GN
De-color tool F 1.3
Part code: 0EUKOG0605L//
Price rank: GN
De-color tool R 0.5
Part code: 0EUKOG0602L//
Price rank: GN
De-color tool F 0.5
Part code: 0EUKOG0603L//
Price rank: GN
SHARP CORPORATION Reprography Division
1/2
Green
C
![](/html/80/8006/8006057a59af5abf7dd0aa0f2de51e71c6eae3aad02057621286fb1da37cf609/bg2.png)
<2> Correction of the tables shown below has been carried out on page 6-8 as follows.
Nipped volume adjustment
The nipped volume of the de-color roller in the paper feed de-color unit should be
adjusted in accordance with the market destinations to the values listed in the table
shown below.
Old
Nipped volume
(Reference) Shaft outer
measurements
Inch series F / R
Overseas AB series F R
Japanese domestic F / R
0.5 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.6 ± 0.1
21.8 21.3 20.9 20.5
Nipped volume adjustment
The nipped volume of the de-color roller in the paper feed de-color unit should be
adjusted in accordance with the market destinations to the values listed in the table
shown below.
New
Nipped volume
(Reference) Shaft outer
measurements
Inch series F / R
Overseas AB series F R
Japanese domestic F / R
Tool used
0.5 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.6 ± 0.1
21.8 21.3 20.9 20.5
Part code: 0EUKOG0601L//
Price rank: BD
2/2