SHARP ARE124 Technical Report

DIGITAL COPIER(OPTION) : AR-SP1

Date

Nov. 19, 1998

No. : ARE-124

MEASURE TO PREVENT THE OC MAT FROM RAISING UP.

1.Model Name: RA-SP1

2.General: There was a problem of the OC mat sometimes becoming bunched, or raising up due

to curling of the platen fixing sheet used to secure the OC mat. As a measure to alleviate this problem, a change has been carried out in the material of the platen fixing sheet.

Part code Part name Quantity Color Material

Old 0CW2235P310// Platen fixing sheet 2 Milk white Polyester film

New 0CW2235P310B/ Platen fixing sheet 2 Transparent Polycarbonate

3.Action: From the 1st lot of 1998 October production.

Ref.

Model

No.

AR-SP1 All

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

2 -24

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

0CW2235P310// 0CW2235P310B/ AF Platen fixing sheet

Effec-

Price

rank

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

tive

time

1st lot '98/10

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green