SHARP ARE123 Technical Report

DIGITAL COPIER : AR-5132/5125

Date

Nov. 19, 1998

No. : ARE-123

ADDITION OF GASKET CARRIED OUT AS A MEASURE TO COMPLY WITH EMI STANDARDS.

1.Model Name: AR-5132/5125 (SCA, UK, SEEG)

2.General: The addition of a gasket in 2 locations has been carried out (please refer to the figures

shown below for details concerning this change). This action has been carried out as measure to comply with EMI standards.

Front face of the optical unit

Gasket PGSK-1008LCZZ

Right side face cabinet

Gasket (attached to the rear face) PGSK-0006FCZZ

3.Action: AR-5132: From the 1st lot of 1998 October production.

AR-5125: From the 1st lot of mass production.

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

Model

No.

AR-5132

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

SCA U.K.

SEEG

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

PGSK-0006FCZZ AV

---PGSK-1008LCZZ AK

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

rank

Parts name

Gasket

Effec-

tive

time

1st lot '98/10

Inter-

change-

ability

Note

2/2