DIGITAL COPIER : AR-FN2
[Service Information]
No. : ARE-122
CORRECTIONS CARRIED OUT IN THE SERVICE
MANUAL OF THE FINISHER OF MODEL AR-FN2.
1.Model Name: AR-FN2
2.General: There were some errors found in the service manual of the model listed above.
Correction of these errors has been carried out and is hereby reported.
3.Description: <1> Correction of the circuit diagram on page 11-3 of the service manual has been
carried out as follows.
CN 4-1 has been corrected to CN 14-1.
CN 4-3 has been corrected to CN 14-3.
CN 4-2 has been corrected to CN 14-2.
<2> Correction of the circuit diagram on page 11-5 of the service manual has been
carried out as follows.
-2 has been corrected to -7.
SHARP CORPORATION Reprography Division
1/5
Green
C
<3> Correction of the circuit diagram on page 11-6 of the service manual has been
carried out as follows.
SB has been corrected to SBHPS.
<4> Correction of the circuit diagram on page 11-7 of the service manual has been
carried out as follows.
CN 6-5 has been corrected to CN 15-1.
CN 6-5 has been corrected to CN 15-2.
CN 6-5 has been corrected to CN 15-3.
CN 6-5 has been corrected to CN 15-4.
2/5
<5> Correction of the circuit diagram on page 11-8 of the service manual has been
carried out as follows.
CN 4-3 has been corrected to CN 13-3.
CN 4-4 has been corrected to CN 13-4.
CN 4-4 has been corrected to CN 13-2.
CN 4-4 has been corrected to CN 13-7.
CN 4-4 has been corrected to CN 13-4.