SHARP ARE116 Technical Report

DIGITAL COPIER : AR-335 etc.

Date

:

Oct. 26, 1998

[Service Information]

No. : ARE-116

ESTABLISHMENT OF A NEW COUNTER ATTACHMENT KIT.

1.Model Name: AR-280/285/335

2.General: The establishment of a new counter attachment kit CG as a service part has been

carried out for the models listed above. The new counter attachment kit has been
established to attach the counter to the machines. It is important to note that the
attachment kits should be used only after consideration and confirmation of the points
of caution for operations listed below.

Counter attachment kit: DKIT-0343FCZZ

[Points of caution for operations]

The points of caution listed below should be well understood, and fully explained to,
and accepted by the customer before attachment operations are carried out.

• Only the number of copies made will be counted.

• The printout volume will not be added to the division management counter during

printer extensions.

• The received fax volume will not be added to the division management counter.

(Regardless, output occurs even when the copy card is not inserted properly, or the
password is not input properly.)

• In this case, the count is included in the total counter of the machine, so there will

be a difference between the total count of the machine and the division management
counter.

SHARP CORPORATION Reprography Division

1/3

Green

C

3.Description: Counter attachment kit CG.

Counter connection harness

Snap band

Counter
attachment plate

Pawls

Counter fixing screw

Grounding
terminal

Attachment plate

fixing screw A
Attachment plate
fixing screw B

Counter

Connector

13 P connector

Binding band

Connector

Counter interface harness

Binding band

(Reference materials):Please refer to the attached supplemental document, "Counter

Installation Procedures" when carrying out installation operations
of the counter attachment kit CG.

2/3