SHARP ARE106 Technical Report

DIGITAL COPIER : AR-5132

Date

:

Sep. 16, 1998

No. : ARE-106

CHANGE IN THE SHAPE OF THE MB DRIVE SHAFT CARRIED
OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.

1.Model Name: AR-5132

2.General: A change has been carried out in the shape of the MB drive shaft used in the optical

unit. This action has been carried out as a measure to improve productivity. The change
described above has been carried out as illustrated in the diagram shown below.

The unused milling of the F side has
been discontinued, and shortened to
the E-ring section.

E-ring

Optical base plate

3.Action: From the 1st lot of 1998 August production.

Ref.

Model

No.

AR-5132 All

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

4 -13

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

NSFTZ2207FCZZ NSFTZ2207FCZ1 AT MB drive shaft

Effec-

Price

5. Interchangeable if replaced with same types of
related parts in use.

6. Others.

Parts name

rank

tive

time

1st lot

'98/8

Inter-

change-

ability

1

Note

SHARP CORPORATION Reprography Division

Green

C