SHARP ARE097 Technical Report

DIGITAL COPIER : AR-AF1

Date

:

Aug. 3, 1998

1. ADJUSTMENTS CARRIED OUT AS A MEASURE TO ALLEVIATE PROBLEMS OF
DIAGONAL FEEDING OF ORIGINAL COPIES FROM THE RADF.

2. CHANGE IN PARTS INSIDE THE DESK CARRIED OUT AS A MEASURE TO
IMPROVE PRODUCTIVITY.

No. : ARE-097

1. Adjustments carried out as a measure to alleviate problems of diagonal feeding of
original copies from the RADF.

1.Model Name: AR-AF1/SP1

2.General: A change has been carried out in the screw hole of hinge L. The round screw hole has

been changed to an oval screw hole. This action has been carried out as an adjustment
measure to alleviate problems of diagonal feeding of original copies from the RADF.

Old

Hinge base L

The round screw hole has been
changed to an oval screw hole.

3.Action: AR-AF1: From 1998 August production.

Others: From 1998 July production.

2. Change in parts inside the desk carried out as a measure to improve productivity.

1.Model Name: AR-5132

New

M5 screw

2.General: A change has been carried out in some of the parts used in the desk, and other parts

have been discontinued. This action has been carried out as a measure to improve
productivity. Please refer to the parts list for details concerning the changes that have
been carried out.

SHARP CORPORATION Reprography Division

1/4

Green

C

2 - [3]

The E-groove has been
discontinued in accordance with
the discontinuance of the E-ring.

0CW4051K317//

2 - [5]

0CW4051K317C/

2 - [4]

2 - [10]

2 - [11]

2 - [13]

2 - [15]

0CW4051K521//

Size SW harness

Discontinued
(CN8) Connector

LTR

0CW4067K530A/

0CW4051K533A/

A4

0CW4067K531A/

0CW4051P1111/0CW4051P111//

2/4

Added making