DIGITAL COPIER : AR-5132
1. CHANGE IN THE MATERIAL USED FOR THE ATTACHMENT PLATE OF THE GUIDE SWITCH IN THE
TRANSPORT UNIT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
2. CHANGE IN THE MATERIAL OF THE LOWER GUIDE OF THE 500 TRAY PAPER FEEDING UNIT CARRIED
OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
3. CHANGE IN THE SHAPE OF THE ADU OF THE ROLLER ARM CARRIED OUT AS A MEASURE TO
IMPROVE PRODUCTIVITY.
No. : ARE-092
1. Change in the material used for the attachment plate of the guide switch in the
transport unit carried out as a measure to improve productivity.
1.Model Name: AR-5132
2.General: A change has been carried out in the material used for the attachment plate of the
guide switch in the transport unit. This action has been carried out as a measure to
improve productivity. In addition to this change the tapping of the attachment holes for
the guide switch has been discontinued and the screws have also been changed.
Guide switch
attachment plate
Changed screw
XBPSD30P14000
XHBSD30P14000
3.Action: Running change carried out from 1998 mid-June production.
2. Change in the material of the lower guide of the 500 tray paper feeding unit carried
out as a measure to improve productivity.
1.Model Name: AR-5040
Changed screw
XBBSD40P10000
XHBSE40P10000
2.General: A change has been carried out in the material used for the lower guide in the 500 tray
paper feeding unit. In addition to this change, a stopper of the pick up roller has been
discontinued in one location. This action has been carried out as a measure to improve
productivity.
SHARP CORPORATION Reprography Division
1/3
Green
C
Changed material
Discontinued
3.Action: From the start of 1998 June production.
3. Change in the shape of the ADU of the roller arm carried out as a measure to
improve productivity.
1.Model Name: AR-5132
2.General: In accordance with a change that has been carried out in the inner diameter of the
clutch spring, a change has also been carried out in the inner diameter of the ADU of
the roller arm. This action has been carried out as a measure to improve
operationability. Details concerning the change that has been carried out in the clutch
spring are reported in Technical Report No. ARE-085.
3.Action: Running change carried out from 1998 mid-June production.
2/3