SHARP ARE077 Technical Report
DIGITAL COPIER : AR-5132 etc.
Date
:
Feb. 27, 1998
1.CHANGE CARRIED OUT IN THE PARTS USED IN THE TRAY DRAWER UNIT.
2.CHANGE CARRIED OUT IN THE PARTS USED IN THE TRAY ASSEMBLY DRAWER UNIT.
3.CHANGE CARRIED OUT IN THE PARTS USED IN THE ADU UNIT.
No. : ARE-077
1. Change carried out in the parts used in the tray drawer unit.
1.Model Name: AR-5132/5040
2.General: The bit insert of the tray handle attachment section has been discontinued, and the part
is now attached by a binding screw fixing method. This action has been carried out as a
measure to improve productivity.
3.Interchange- ∗
ability:
4.Action: From 1997 mid-December production.
Old parts are interchangeable only with old parts, and new parts are interchangeable
only with new parts.
<Part name> <Old> <New>
Drawer case GCASP0155FCZZ GCASP0155FCZ1
Tray handle JHNDP0107FCZZ JHNDP0107FCZ1
Screw XBTSE40P08000 XEBSE40P10000
SHARP CORPORATION Reprography Division
1/4
Green
C
2. Change carried out in the parts used in the tray assembly drawer unit.
1.Model Name: AR-5040
2.General: The bit insert of the tray handle attachment section has been discontinued, and the part
is now attached by a binding screw fixing method. This action has been carried out as a
measure to improve productivity.
3.Interchange- ∗
ability:
Old parts are interchangeable only with old parts, and new parts are interchangeable
only with new parts.
<Part name> <Old> <New>
Tray drawer case GCASP0156FCZZ GCASP0156FCZ1
Tray handle JHNDP0107FCZZ JHNDP0107FCZ1
Screw XBTSE40P08000 XEBSE40P10000
4.Action: From 1997 mid-December production.
2/4
Loading...