Sharp Aquos LC-70UD1U Operation Manual

Download

Page 1

SHARP,

AQU

LIQUID CRYSTAL TELEVISION TELE_VISEUR ACL

TELEVISOR CON PANTALLA DE

CRISTAL LJQUIDO

OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACION

NOM1245

NYOE

IMPORTANT : Please read this operation manual before

starting operating the equipment.

IMPORTANT : Veuillez lire ce mode d'emploi avant de

commencer _ utiliser I'appareil.

IMPORTANTE : Lea este manual de operaci6n antes de

comenzar a operar el equipo.

LC-7 1U

B p

Ultra HD_

5KDISPLAY

DOLBY

DIGITAL PLUS

H_lrn| TM

HIGH-DEFINITION MULTIMEDIA INTERFACE

DU(

_dlna o @at,

CERTIF_ED 2.0+Digital Out

Page 2

Skype TM is supported by this TV set. For details, refer to the following:

For the operation manual: http://www, sharpusa, corn (USA) http://www.sharp.ca (Canada) http://www.sharp.com.mx (Mexico) For information on the communication camera: http://freetalk.me/product/sharp/ For details on Skype: http://www.skype.com

Ce televiseur est compatible avec Skype TM. POUr les details, reportez-vous a :

Pour le mode d'emploi : http://www.sharpusa.com (Etats-Unis)

http://www.sharp.ca (Canada) http://www.sharp.com.mx (Mexique) Pour des informations sur la camera de communication : http://freetalk.me/product/sharp/ Pour les d6tails sur Skype : http://www.skype.com

Skype TM es compatible con este televisor. Rata eonocer m_s detalles, consulte:

Para el manual de operacion: http://www.sharpusa.com (EE.UU.) http://www.sharp.ca (Canada) http://www.sharp.com.mx (Mexico) Para obtener mas informaci6n sobre lacamara de comunicaci6n: http://freetalk.me/product/sharp/ Para conocer detalles de Skype: http://www.skype.com

Page 3

iMPORTANT iNFORMATiON

IMPORTANT: I Model No.:

To aid reporting in case of loss or theft, please record the

TV's model and serial numbers in the space provided. I Serial No.: The numbers are located at the rear and left side of the T_.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

_ _ The lightning flash with arrow-head

symbol, within anequilateral

_IL _:_ triangle, is intendedto alert the

DONOTOPEN

[_:_11 / [*] _1

user to the presence of

RISK OF ELECTRIC SHOCK uninsulated "dangerous voltage"

within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK),

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL

II The exclamation point within a

triangle is intended to alert the

,_, .... tothe p........ f important

operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

WARNING: FCC Regulations state that any unauthorized changes or modifications to this

equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment.

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to

connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-70UD1U

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RESPONSIBLE PARTY:

SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163

TEL: 1-800-BE-SHARP

For Business Customers: URL http://www.sharpusa.com

iNFORMATION: B

This equipment has been tested and found to comply with the limits for a Class 13digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Wireless Radio

For product available in the USA/Canada market, only channel 1-11 can be operated. Selection of other channels is not possible. This device is going to be operated in 5.15-5.25GHz frequency range, it is restricted in indoor environment only. important: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 2Ocm between the radiator & your body.

Industry Canada Statement

This Class B digital apparatus complies with CAN ICES-003(B)/NMB-3(B) Wireless Radio

For product available in the USA/Canada market, only channel 1-11 can be operated. Selection of other channels is not possible.

The device could automatically discontinue transmission in case of absence of information to transmit

or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. Important: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC Radiation Exposure Statement: This device complies with IC RSS-210 rules; Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept interference recieved, including interference that may cause undesired operation.

This product contains a CR Coin Lithium Battery which contains Perchlorate Material - special

handling may apply, California residents, See www.dtsc.ca.gov/hazardouswaste/perchlorate/ [ U.S.A. ONLY

"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical."

Page 4

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystam Temevision. To ensure safety and many years of trouble-free operation of your product, please read the important Safety mnstructions

carefully before using this product.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and

property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating

and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additionam Safety information

15) Power Sources-This product should be operated only from the type of power source indicated on the marking label. If you are net sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

16) Overloading--Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17) Object and Liquid Entry--Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18) Damage Requiring Service--Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as an improper adjustment

of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,

_-2

iMPORTANT SAFETY iNSTRUCTiONS

e) If the product has been dropped or damaged in any way, and

f ) When the product exhibits a distinct change in performance - this indicates a need for

service.

19) Replacement Parts--When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

20) Safety Check--Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21) Wall or ceiling mounting--When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.

• ' ' EXAMPLE OF ANTENNA GROUNDING AS PER

Outdoor Antenna Grounding ------If an outside NATIONAL ELECTRICAL CODE ANSI/NFPA 70 | antenna is connected to the television z._.__ | equipment, be sure the antenna system is _ANTENNA LEAD | grounded so as to provide some protection n _ INWIRE | against voltage surges and built-up static /'_-_k

/ charges. J ....-....... //_"Lx

| Article 810 of the National Electrical Code j _X_7 _ _ _ "xx_ ANTENNA

.... ' DISCHARGE UNIT

| ANSI/NFPA70 prov,des,nformat,onw,th _-_'_/// "_J:_J "_/NEOSEOTION81020' | regard to proper grounding of the mast and I E,_,_T----_ / f'Jl ' ' ' | supporting structure, grounding of the lead- I SERVICE I / S I GROUNDINGCONDUCTORS

/ in wire te an antenna discharge unit size of [ EO_P_'_ENT-----._.I_q _

, " - ' " NEC SECTION 810 21

| grounding conductors, location of antenna- _ _]Lt_b/_ | discharge unit, connection to grounding _. _ROUNDCLAMPS

| electrodes, and requirements for the =_ POWERSERVICEGROUNDING | grounding electrode. ELECTRODESYSTEM

" " (NEC ART 250)

NEC NATIONAL ELECTRICAL CODE

,, WRier and Moisture ------Do not use this product near water - for example, near a baih tub, wash bowl,

kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

,, Stand ------Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an

unstable base can cause the product to fall, resulting inserious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recemmended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer's instructiens. Use

only the mounting hardware recommended by the manufacturer. ,, Selecting the Iocaiion ------Select a place with no direct sunlight and good ventilatien. ,, Ventilation ----The versts and other openings in the cabinet are designed for ventilation. Do net cover

or block these vents and openings since insufficient ventilation can cause overheating and/or shorten

the life of the product. Do not place the product ors a bed, sofa, rug or other similar surface, since they

can block ventilation openings. This product is not designed for built-in installation; do net place the

product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the

manufacturer's instructiens are followed. ,, The front panel used in this product is made of glass. Therefore, it cars break when the product is

dropped or applied with impact. Be careful net to be injured by brokers glass pieces in case the panel

breaks. ,, Heat ------The product should be situated away from heat sources such as radiators, heat registers,

stoves, or other products (including amplifiers) that produce heat. ,, The Liquid Crystal panel is a very high technology product with 8,294,400 pixels, giving you fine picture

details.Occasionally, a few non-active pixels may appear ors the screen as a fixed point of blue, green or

red. Please nete that this does not affect the performance of your product. ,, Lightning -----For added protection for this television equipment during a lightning storm, or when it is

left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the

antenna. This will prevent damage to the equipment due to lightning and power-line surges. ,, Power Lines ------An outside antenna system should not be located in the vicinity of overhead power

lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When

installing an outside antenna system, extreme care should be takers to keep from touching such power

lines or circuits as contact with them might be fatal.

Page 5

iMPORTANT SAFETY iNSTRUCTiONS

•-topreventfire,neverplaceanytypeofcandleorflamesenthetopornearthefVset. CHILD SAFETY:

', To prevent fire or shock h_ard, do not place the AO cord under the TV set or other heavy items.

• Do not display a still picture for a long time, as this could cause an afterimage to remain. '_To prevent fire or shock h_ard, do net expose this product to dripping or sp[ashing.Ne

objects filled with liquids, such as vases, sheuk_ be placed on the product.

,_Do not insert Ioreign objects into the product. Inserting objects inthe air vents or other I I

openings may result in fire or electric shock. Exercise special caution when using the I I

product around children.

Precautions when transporting the TV

When transporting the [V, never carry it by hok_ing or otherwise putting tpj[. ;_,_

pressure onto the display. Be sure to always carry the TV by two people _]_ , a_-II'_ holding itwith two hands.

Caring for the cabinet

Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.

• Using a chemical cloth (weVdry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking.

_,Wiping with a hard cloth or using strong Iorce may scratch the surface of the cabinet. ,_Ifthe cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted

with waler and thoroughly wrung out, and then wipe with a soft dry cloth.

,_Avoid using benzene, thirlner, and other solvents, as these may deform the cabinet and cause the paint

to peel off.

® Do not apply insecticides or other volatile liquids.

Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time.

Plasticizers inside the plastic may cause the cabinet te deform and cause the paint to peel off.

Caring for the front panel

• Turn off the main power and unplug the AC cord from the wall outlet before handling. G_' ,_Gently wipe the surface of the Iront panel with a soft cloth (cotton flannel etc.). _} _, -. _

To protect the Iront panel, do not use a dirty ck)th, liquid cleaners', or a ci'_emical _" cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front _ _/ _i

panel" , ,r-

'_Wiping with a hard cloth or using strong force may scratch the surface of the front

panel.

,_Use a soft damp cloth to gently wipe the front panel when it is really dirty.(It may scratch the surface of

the front panel when wiped strongly.) ,_Ifthe front panel is dusty, use an anti--staiic brush, which is commercially available, to clean it. ,_To avoid scratching the frame or screen, please use a soft, lint free cleth for cleaning. Approved cleaning

cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z--LCD--CLOTH-3) packs.

Call 1-800 BE--SHARP for ordering, or VISIT http://www.sharpusa.com/SharpDirect.

_-3

Page 6

iMPORTANT SAFETY iNSTRUCTiONS

3D Glasses

Prevention of accidental ingestion

• Keep the accessory out of the reach of small children. Small children carl accidentally swallow these parts.

- If a child accidentally swallows any of these parts, seek immediate medical attention.

Do not disassemble

• Do not disassemble or modify the 3[) Glasses except when recycling the batteries. Do not modify the 3[) Glasses.

Handling the 3D Glasses

• Do not drop, exert pressure on, or step on the 3D Glasses. Doing so may damage the glass section, which may result in the risk of injury.

_,Be careful not to trap your Iinger in the hinge section of the 3D Glasses. Doing so may result in injury.

-- Pay special attention when children are using this product.

Caution for lithium battery

_,Batteries must not be exposed to excessive heat such as direct sunlight or fire. _,Replace only with the same or equivalent type of battery. The battery may explode if improperly replaced.

• lake care not to reverse the batlery poles (+ and -) when loading the battery. Follow the correct procedure when loading the battery. Loading the battery incorrectly may damage the battery or cause it to leak baitery fluid, which could result in a fire, injury or damage.

Using the 3D Glasses _,Use of the 3[) Glasses should be limited to a maximum of 3 hours, and in any case no more than one

movie.

,, Use only the 3D Glasses recommended for this TM.

- Use the 3D Glasses only for the specified purpose.

®Do nol move around while wearing the 3D Glasses. The surrounding area may appear dark, which may

result in falling or other accidents that may cause injury.

Caring for the 3D Glasses

_,Use only the cloth provided with the 3D Glasses to clean the lenses. Remove dust and soil from the

cloth. Any dust or other soiling on the cloth may result in scratches. Do not use solvents such as benzene or thinners as doing so may cause the coating to peel off.

_,When cleaning the 3D Glasses, take care not to allow water or other fluids to come into contact with the

glasses.

_,Always store the 3D Glasses in the case provided when not in use. _,When storing the 3D Glasses, avoid very humid or hot locations.

Viewing 3D images

,_If you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and

rest your eyes.

,, Do not use the 3D Glasses if they are cracked or broken.

WARNING

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

"This product contains acoin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek

immediate medical attention."

Accessories

Make sure the following accessories are provided with the product.

Page 7

Page 6

Page 7

For details, refer to the operation manual.

[] Operation manual (this publication) [] Connection guide [] Operation manual for the 3D Glasses

* Always use the AC cord supplied with the TV. * The illustrations above are for explanation purposes and may vary slightly from the actual accessories.

| 3D Glasses _ AN-3DG40

The listed optional accessories are available Ior the Liquid Crystal Television. Please purchase them at your nearest shop. * Additional optional accessories may be available inthe

near future. When purchasing, please read the newest catalogue for cempatibilky and check the availabilky.

_-4

Page 7

Contents

iMPORTANT iNFORMATiON .............................. 1

DEAR SHARP CUSTOMER ................................. 2

iMPORTANT SAFETY iNSTRUCTiONS ........... 2-4

Accessories .......................................................... 4

Supplbd Accessories .................................... 4

Optional Accessories ..................................... 4

QUICK REFERENCE

Attaching the Stand ....................................... 6

QUICK INSIALLATION TIPS .......................... 6

Experiencing HD Images ................................ 6

Installing Batteries inthe Remote Control

Unit ............................................................. 7

Using the Remote Control Unit ....................... 7

Preparation

Antennas ....................................................... 7

Part Names

TV (Front) ....................................................... 8

TV (Side) ........................................................ 8

TM (Rear)........................................................ 8

Remote Control Unit ...................................... 9

introduction to Connections

Types of Connection .................................... 10

Displaying an External Equipment Image ...... 10

Connecting to External Equipment

Conrsecting a Blu-ray Disc/DVD Player or

HD Cable/Satellite Set--top Box ................ 11

Conrsecting a VCR, Game Console,

Camcorder or Cabb/Satellite Set-top Box..,, 11

Conrsecting a Surround System/

Audio System ........................................... 12

Conrsecting a PC ......................................... 12

Watching TV

Turning On/OfFthe Power ............................ 13

Initial Installation ...................................... 13-14

Direct Button Operation

Changing Channeb ................................ 15

Changing Volume ................................... 15

MUTE .................................................... 15

FREE!ZE................................................. 15

INPUT .................................................... 15

FLASHBACK .......................................... 15

SmartCentral .......................................... 15

NETFLIX ................................................. 16

AUDIO ................................................... 16

Sleep Timer ............................................ 16

AV MODE ............................................. 16

Closed Captions and Digital Closed

Captions ............................................. 17

VIEW MODE ..................................... 17-18

On-Screen Display Menu

On-Screen Display Menu Operation ............. 19

Menu Operation Buttons .............................. 19

Menu Items .................................................. 20

Picture Settings ...................................... 21-22

Audio Settings ............................................. 22

Power Control .............................................. 28

System Options ...................................... 23-25

Initial Setup ............................................. 25-27

Information ............................................. 27-29

Enjoying 3D image Viewing

Display Methods for 3[) and 2[) Images ....... 30

Viewing 3D Images ................................. 30-31

Configuring the 'f_/Settings to Enhance

3D Image Vbwing ................................ 31-32

Enjoying Photo/Music/Video Playback

Connecting a USB Memory Device/

USB Hard Drive/SD Memory Card ............ 32

Connecting a Home Network (DLNA) Server,,.. 33

Selecting the Folders to Play Back ............... 33

Playing Back Files on a USB Memory Device/

SD Memory Card/Home Network (DLNA)

Server ................................................. 34-36

Playing Back Files from a

Portable Device or PC ............................... 36

Using AQUOS LiNK

Controlling HDMI Equipment

Using AQUOS LINK ............................. 3839

Link Operation Menu .............................. 39-40

Using a Smartphone with the TM.................. 40

Using a PC

Adjusting the PC Image ............................... 41

Setting Audio Input ...................................... 41

Control of the TM..................................... 41-42

PC Compatibility Chart ................................. 42

Using the Intemet

Connecting to the Interact ........................... 43

Interact Setup ......................................... 4344

Entering Text (Software Keyboard) ............... 44

Using the Browser .................................. 45-46

Using Keyboard and Mouse ......................... 46

Using Applications via the Interact .......... 46-47

DISCLAIMERS ....................................... 47

Appendix

Removing the Stand .................................... 47

Setting the TM on the Wall ............................ 48

Troubleshooting ........................................... 49

Troubleshooting - 3D Images ....................... 49

Troubleshooting - Error Message ................. 50

Information on the Software License Ior

This Product ............................................. 50

Specifications

TV ................................................................ 51

Wireless LAN ............................................... 52

Bluetooth ..................................................... 52

Trademarks ........................................................ 53

Calling for Service ............................................. 54

LIMITED WARRANTY ........................................ 54

Dimensional Drawings ®The dimensional drawings for the LCD TM set are

shown on the inside back cower.

Other Viewing Options

Presetting Remote Control Function ............ 37

Operating the Connected Equipment ........... 38

® The illustrations and ors-screen displays in this operation manual are for explanation purposes and may

vary slightly from the actual operations,

_-5

Page 8

QUICK REFERENCE

® Before attaching (or detaching) the stand, unplug the AC cord. ® Before performing work spread cushioning over the base area to lay the FV on. This will prevent it from

being damaged.

o Be sure to follow the instructions. Incorrect installation of the stand may result in the "IV falling over.

1 Confirm that there are 11 screws (4 long screws,

4 middle screws and 3 short screw) supplied with the stand unit.

2 Attach the supporting post for the stand unit

onto the base as shown below.

, The supporting post attaches to the base at an

offcentered location on the base. Be sure to attach

the supporting post in the direction indicated

below and attach the stand to the TV with the

wider side of the base facing forward.

Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit.

I! Middle screws

Insert the stand into the openings on the rear of the FV.

Make surethatthe stand is firmlyinserted intotheTV. Improperinstallationmayresult intiltingof the IV set.

Insert the stand cover.

@_ Insert the 3 screws to secure the stand cover.

__S hort screws

1 Attach your antenna to the back of the television.

(See page 7.)

2 Connect the AC plug for the television into the

AC outlet.

, Place the TV close to the AC outlet, and keep the

power plug within reach.

Bundle the cords properly with the cable tie.

, When bundling the cords, use the AC cord holder

mounted on the TV. Relocate from _ to {B_.

Remove and loosen

Attach and bundle together

3 When turning on the TV for the first time, press

POWER on the television.

POWER "'T-_

4 Insert the batteries into the remote control unit.

(See page 7.)

, Speakers cannot be detached from the TV. , The TV angle cannot be adjusted.

e= = Q } .e =

An HDIV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get

HD programming from the following: ® Over-the-air broadcasting via HD quality antenna ® HD cable/satellite subscription ® HD compatible external equipment

, For information on updating to HD programming, ask

your cable/satellite service provider,

, TO PREVENT RISK OF ELECTRIC SHOCK, DO

NOT TOUCH UN-INSULATED PARTS OF ANY

CABLES WITH THE AC CORD CONNECTED,

l ln the installation procedure, be careful not to catch your fingers between the

TV set and the floor, t / Do not remove the stand from the TV unless using an optional wall l ,.t

mount bracket to mount it. _ _.k/_ J After attaching the stand to the TV, do not hold the stand when you

put up, set up, move or lay down the TV. //_

Page 9

QUICK REFERENCE

If the remote control falls to operate TV functions, replace the batteries in the remete control unit,

1 Open the battery cover,

2 Insert two "AAA" size batteries (supplied with the

product).

, Place the batteries with their terminals

corresponding to the ( _ ) and (-) indications in

the battery compartment.

Close the battery cover.

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. , Do not mix batteries of different types. Different types

of batteries have different characteristics.

, Do not mix old and new batteries. Mixing old and new

batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

, Remove batteries as soon as they are worn out.

Chemicals that leak from batteries that come in contact

wkh skin can cause a rash. Ifyou find any chemical

leakage, wipe thoroughly with a cloth.

, The batteries supplied with this product may have a

shorter life expectancy due to storage condkions.

, Ifyou will not be using the remote control unit for an

extended period of time, remove batteries from it.

a = = = e = o o

Use the rernote control unit by pointing it towards the remote control sensor on the /_/. Objects between the rernote control unit and the remote control sensor may prew_nt proper operation.

Remote control sens°[_0:::i

30 °1" ".,, ,"

14%0o

__ stand is attached.

m Cautions regarding the remote control unit , Do not expose the remote control unit to shock. In

addition, do not expose the remote control unit to

liquids, and do not place it in an area with high humidity.

, Do not install or place the remote control unk under

direct sunlight. The heat may cause deformation of the

remote control unk.

, The remote control unk may not work properly if

the remote control sensor on the TV is under direct sunlight or strong lighting, in such cases, change the

angle of the lighting or the TV, or operate the remote control unk closer to the remote control sensor.

IMPORTANT: IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INS TT_LL.ATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLESZkSE CONTTkCT US AT 1-800-BE-SHARP.

Preparation

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of

connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables.

fConnecting Antenna Cable

• Connect the antenna cable to the TV using one of the methods in the illustration as shown (_, @, @

or _).

Home Antenna

(_ Cable without a Cable TV lead-In

terminal

(75-ohm)

CATV converter /@ cJ,_ =

Coaxial cable

_ VHF/UHF antenna

"_'_7 Home Antenna

5-ohm coaxial cable (round) terminal (75-ohm)

Coaxial cable

/'6h _3_ Combination VHF/

UHF antenna

_4_ Separate VHF/UHF

antenna

"_tS75-ohm coaxial cable (round)

_O0-ohm twin4ead or 30,0/7.5-ohm_

cable (flat) I aoap_er_

UHF

ANTENNA VHF ANTENNA

I_ o TV ant....

terminal

1.A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools.

2.A 300-ohm system isa flat "twinqead" cable that can be attached to a 75-ohm terminal through a 300/75-0hm adapter.

_ F-type connector should be

finger-tightened on_y,

When connecting the RF cable to the TV set, do not tighten

F-type connector wkh tools. if tools are used, it may cause damage to your TV set. (The

breaking of internal circuit, etc.)

-- F-type connector

_" 75-ohm coaxial cable (round)

300-ohm twinqead cable (flat)

75=ohm coaxial cable

_-7

Page 10

Part Names

Remote control sensor _.................. TIMER indicator 4

POWER i'rldicator *2 -- ' ' *

"10PC: Optical Picture Control (See page 21 .) *2 This indicator Nghts blue when the TV isturned on. You can also turn off the indicator by setting "Icon Light Up

Setting" to "Off". (See page 24.)

*3 This indicator Nghts blue in 3D mode. You can also turn off the indicator by setting "Icon Light Up Setting" to "Off".

(See page 24.)

*4 This indicator Nghts red when the sleep timer is set to "On". You can also turn off the indicator by setting "Icon Light

Up Setting" to "Off". (See page 24.)

POWER----- button o

MENU -- _ i buttorl _;

INPUT --3 button

Charlrlel -- buttons

(CHA/V)

Volume _ 8

buttons (VOL+/-)

DuoBass

USB 2 terminal *3

ETHERNET terminal

DIGITAL AUDIO

OUT terminal

AUDIO IN terminal (shared for PC IN and HDMI IN 2) *2

RS-232C terminal

-- PC IN terminal

......_L;Did:i ,Tij_o......... ,

_ _--VIDEO IN2t ........ 1_

_-AUDIO__Vl o

_, _ ,_, _--VmDEO IN I terminals

"_uD_ "['_ _-- COMPONENT 'N

_i_'_'_?f:-_'/__ '_ _ _ termirlals

AUDIO OUT terminal

USB 1 terminal *3

-- AHRDcM:I/Nd_oteRrr_licnralOh....... I

HDMI IN 2 terminal

HDMI IN 3 terminal

-- DMI IN 4 terminal MHL Mobile High-Definition Link

(See page 40.)

"1 See pages 10 to 12 and 38 for external equipment connection. *2 See page 41 for details on the Audio Select function.

*3 Skype TM is available for the USB terminal. For details, referto the following:

® For the operalion manual:

http://www.sharpusa.com (USA) http://www.sharp.ca (Canada) http://www.sharp.com.mx (Mexico)

® For information on the communication camera:

http://freetalk.me/product/sharp/

® For details on Skype:

http://www.skype.com

* See pages 10, 13, 19 and 24 for button operations.

_-8

Page 11

Part Names

1 POWER: Switch the 'f_/power on or enter 21 AUDIO: Selects the MTS/SAP or the audio

standby. (See page 13.) mede during multichannel audio broadcasts. (See

11 _ 26 12

2 TV, STB, DVD_'VCR, AUDIO: Switches the page 16.)

remote control for TV, STB, BD, DVD, VCR 22 ENT: Jumps to a channel after selecting with the and AUDIO operation. (See pages 37 to 38 for 0---9 buttons.

details.) 23 FLASHBACK: Return to the previous channel or * To enter the code registration mode, you external input mode. (See page 15.)

need to press an appropriate button (STB, 24 VIEW MODE: Select the screen size. (See pages DVD_,VCR or AUDIO) and DISPLAY at the 17 and 18.)

same time.

25 INPUT: Select a 'IM input source. (]_/, HDMI1,

3 External equipment operational buttons: HDMI2, HDMI3, HDMI4, COMPONENT, VDEO1,

Operate the external equipment. VDEO2, PC IN, Home Network (DLNA), SD/

4 OPTION: Display the Link Operation Menu SDHC/USB) (See pages 10 and 15.)

screen. This button will function only when 26 CH/X./V: Select the channel. (See page 15.)

AQUOS LINK is used. (See pages 38 to 40 for

27 SmartCentral: Display the application window.

details.) (See page 15.)

5 SLEEP: Set the sleep timer. (See page 16.)

28 RETURN: Return to the previous menu screen.

6 0----9:Set the channel. (See page 15.)

29 NETFLIX: Display the Netfiix screen. (See page

7 • (DOT}: (See pages 15 and 38.) 16.)

8 CC: Display captions from a closed-caption 30 FAV APP 1,2, 3: You carl assign your favorite

source. (See page 17.) applications to these buttons. (See pages 44 to

9 AV MODE: Select an audio or video setting. (See 46.)

page 16.) 10 MUTE: Mute the sound. (See page 15.) 11 VOL +/- : Set the volume. (See page 15.) 12 MENU: Display the menu screen. (See page

1g0

13 3D: Select between 3D and 2D image viewing.

(See pages 30 to 31 Ior details.) 14 J,/T/_/_, ENTER: Select a desired item on

the screen.

15 EXIT: Turn off the menu screen.

, When using the remote control unk, point k at the TV.

16 FAVORITE OH: Set the favorite channels. (See

page 25.) 17 A, B, C, D: Select 4 preset favorite channels in

4 diffgrent categories. (See page 25.)

While watching, you can toggle the selected

channels by pressing A, B, C and D. 18 DISPLAY: Display the channel informatien. 19 POWER (SOURCE): Turns the power of the

external equipment on and off. 20 FREEZE: Set the still image. Press again to

return to normal screen. (See page 15.)

_)-9

Page 12

introduction to Connections

For connecting the TV to external equipment, use commercially available cables.

, The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products. [] Connecting to video equipment or PC

Image quality differs depending on the termklal used, [o enjoy clearer images, check the output terminals of your external equipment and use its appropriate termklals for higher quality images,

ton

Qualily

• }

i_:ii`_11iiiiiiii!iiiii#i_Jiiiii]i_iiiiii!i_iii_i!i!i_i_i_i_i!_!;i!i!_i!iiiIiiii_i_i_i_Hi_i_H_Hiiiiiii#ii_i!:_!iiiiii_i!iii_iiii_iii_i!ii!i_i_i!iiiii1iIiiiHIi!#Hiiiii_Ii

HDMFcerNfied cable

Quality

O 3.5 mmstereo minijack cable

@ @

DVI-HDMI conversion cable

Component video cable

Audio cable

AV cable

14_ml

AUDIO

DV_ OUT

COMPO_NT

AUDIO

_®®L ®

AUDIO VIDEO

=_ Pages

11, 12

Pages 11, 12

Page 11

[] Connecting to audio equipment

L.................',

Optical fiber cable @

_3.5 mm stereo minijack to RCA audio cable

OPTICAL

DIGITAL AUDIO INPUT

.....

ANALOG AUDIO IN

Page 12

=_ Page 12

To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.

INPUT =

Example

I_ _ SmartCentral

1 2

Press INPUT,

, The INPUT list screen displays.

Press A/_' to select the input source,

, You can also select the input source by pressing INPUT.

Each time INPUT is pressed, the input source toggles.

HDMI1 ._ HDMI2 ._, HDMI3

TV *-- HDMI4

, An image from the selected source automatically displays. , Ifthe corresponding input is not plugged in, you cannot

change the input. Be sure to connect the equipment beforehand.

@-10

Page 13

Connecting to E×temal Equipment

You can connect many types of external equipment to your lV. To view exk_rnal source irrlages, select the [] When using a Component cable (COMPONENT IN}: input source by pressing INPUT on the remote control unit or on the 'f_/. (See pages 10 and 15.) For connecting the TV to external equipment, use commercially available cables.

, To protect equipment, always turn off the TV before connecting any external equipment. , Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

, When connecting 4K equipment to the TV, use the HDMI IN 1, 2, 3 or 4 terminal (3840 x 2160 (Ultra HD) 30Hz,

25Hz, 24Hz are available.).

[]When using an HDMI cable (NDMI IN 1, 2, 3 or 4}: , The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a connection for

audio and video signals using a single cable. The HDMI iN terminal supports high-resolution video input.

, To enjoy 1080p display capabilky, connect your external equipment using an HDMI-certified cable or a component

cable and set the equipment to 1080p output.

[] When using a Composite cable (VIDEO IN 1 or 2}:

, To enjoy 1080p display capabilky, connect your external equipment using an HDMI-certified cable or a component

cable and set the equipment to 1080p output. , Supported Audio format: Linear PCM, Dolby Digkal, DTS, sampling rate 32/44.1/48kHz. , When you connect ARC-compatible equipment, use HDMI IN 1.

[] When using a DVI-HDMI conversion cable (HDMI IN 2}:

DVI-HDMI conversion cable

AV cable

minijack cable

, When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addkion to

connecting a DVbHDMI conversion cable to the HDMI IN 2 terminal, connect a G 3.5 mm stereo minijack cable to

the AUDIO iN terminal and set "Audio Select" to "HDMl+Analog". (See page 41 .)

Page 14

Connecting to External Equipment

i=.

[] When connecting an AV amplifier for a surround system

HD Cable/Satellite set=top box

Optical fiber cable *2

Letting the TV output the audio to an AV amplifier:

"1 When you connect ARC-compatible equipment, use the HDMI iN 1 terminal. *2 If the equipment to be connected is not compatible with the ARC, connect an optical fiber cable.

Refer to page 42 for a list of PC signals compatible with the IV.

•When using an HDMI cable (HDMI IN 1, 2, 3 or 4):

HDMI-certified cable

_L i 1

Depending on the board, only video signals may be output, in this case, in addition to connecting an HDMI-certified cable to the HDMI iN 2 terminal, connect a © 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMl+Analog". (See page 41 .) The HDMI IN terminals only support digkal signal.

[] When using a DVI-HDMI conversion cable (HDMI IN 2}:

If the image is not in sync with the audio, check the settings of the connected surround system.

[] When connecting an audio amplifier It is possible to output audio through file DIGITAL AUDIO OUT terminal. (See page 23 for details.)

Optical fiber cable

@3.5 mm stereo minijack to RCA audio cable

When using a DVI-HDMI conversion cable, you should make an analog audio connection, in this case, in addkion to connecting a DVI-HDMI conversion cable to the HDMI iN 2 terminal, connect a @ 3.5 mm stereo minijack cable to the AUDIO iN terminal and set "Audio Select" to "HDMl+Analog". (See page 41 .)

[] When using an analog RGB cable (PC IN}:

minijack cable

See page 24 for details on the Output Select function.

_-12

When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN. When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 41 .)

Page 15

Watching TV

• • | Oj| = = " e ,=

POWER=f=i

m + | ;

POWER (On/Standby)

Press POWER on the IV or on the remote control unit to turn the power on. ® POWER indicator (Blue): The lM is on.

, The Initial Installation starts when the TV powers on for

the first time. if the TV has been turned on before, the

initial Installation will not be invoked. For changing the settings of the Initial installation, perform "EZ setup" on

the Initial Setup menu on page 25.

Press POWER on the IV or on the remote control unit again te turn the power off.

® The 'f_/enters slandby and the image on the

screen disappears.

® The POWER indicator on the IV turns off.

, if you are not going to use this TV for a long period

of time, be sure to remove the AC cord from the AC outlet.

, Weak electric power is still consumed even when the

TV is turned off.

When you turn on the lV for the first time, it will

automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit.

1. Inser_ the batteries into the remote control unit. (See page 7.)

2. Connect the antenna cable to the TV. (See page 7.)

3. Plug in the AC cord to the AC outlet. (See page 6.)

_ SmartCentml

3 Press A/Y to select the time zone where you

are using the lV, and then press ENTER.

Example

, The time zone differs depending on the selected

country.

, The factory preset value is the time zone for the

capRal of the selected country.

Press A/V to select the Daylight Savings Time. and then press ENTER.

Antenna & Cable/STB Select the type of connection you will use to watch TV. 6 Press _/1_ to select "Arlterlna & Cable" or "Set--

top box", and then press ENTER.

To watch TV via an antenna or cable connection (without using a set-top box): Select "Antenna & Cable", and then go to step 7.

To watch TV via a set-top box: (_Select "Set-top box", and then press ENTER. _Please make sure your sebtop box is turned on,

and then press ENTER.

_To watch TV, select the input source

corresponding to the terminal connected to the set-top box. When doing so, you must make the setting to skip "TV". Press 4/1_ to select "On", and then press ENTER.

Language (Language setting) Select from among 3 languages: English, French and Spanish. 1 Press ,_,/V to select the desired language listed

on the screen, and then press ENTER.

Location & Time Make settings for the country, area and time zone

where you use the TM.

2 Press A/V to select "United States", "Canada"

or "Mexico", and then press ENTER.

. "Auto" is the default selection.

TV Location

Select "Home" or "Store" for the location where you plan to insta, the FV. 5 Press 4/1_ to select "Home" or "Stere".

Press ENTER te enter the setting.

Home: "Power Saving" is set to "Advanced", and AV

MODE is set to "STANDARD".

Store: "Power Saving" is set to "Off" and AV MODE

is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to

"DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off". , Ifyou select "On" and there is no operation

for 30 minutes:

AV MODE will be reset to "DYNAMIC (Fixed)". When a 3D signal is detected, 3D images will switch to 2D images.

, When "Off" is selected:

- AV MODE will be set to "DYNAMIC (Fixed)".

Feature Demo: When "On" is selected, after all

the settings are completed, the Feature Demo screen is displayed if there is no operation for

several minutes.

, When this is set to "On", the channel on the TV

cannot be changed using the remote control unit or menu. (e.g. OH A/V, Favodte OH, etc.)

, See page 23 for details on the input Skip

function.

_Press INPUT to select the input source

corresponding to the terminal connected to the set-top box. Make the necessary settings on the connected external equipment. , See the operation manual of the connected

equipment for setting up the equipment.

Air/Cable (Antenna setting}

Make sure what kind of connection is made with

your IM when selecting "Air" or "Cable".

7 Press _/_ to select "Air" or "Cable".

Press ENTER to enter the setting.

_-13

Page 16

Watching TV

CH Search (Channel search) Channel auto search makes the R/look for all channels viewable in the set area,

8 When "Air" is selected inAntenna setting:

Press _/_" to select "Start", and then press ENTER.

When "Cable" is selected in Antenna setting:

Press A/V to select "Analog & Digkal Search Start" to search both analog and digital broadcasts, or to select "Analog Search Start" to search only analog broadcasts, and then press ENTER.

, The Channel search will start automatically. , To exR the Channel search screen, select

"Cancel", and then press ENTER.

_The Channel search results may include

scrambled channels or channels that are not viewable in the set area. Press 4/1_ to select

"Yes", and then press ENTER to remove scrambled channels.

Network

When you connect to the Interact on the TV, select

the desired connection method and follow the instructions shown on the display, ® Wireless LAN connection is possible only when the

WPS (push button) method is used, If any other

method is used, make settings by Irlitial Setup > Interact Setup > Network Setup, (See pages 43 to

44,)

9 Press 41/1_ to select "Yes", and then press

ENTER,

10 Press A/V to select "Wired" or "Wireless", and

then press ENTER,

Completed 1 1 The settings confirmaiion screen is displayed,

Confirm the information displayed on the screen, and then press ENTER,

E×amples of the settings confirmation screen When one or more channel is received after "Antenna & Cable" was selected in step 6 and a

search was carried out.

When "Set-top box" was selected in step 6.

, Click "OK" to display the confirmation screen for

input source swRching.

Connection using an ETHERNET cable: _Select "Wired" and press ENTER. (2>_Confirm that the TV is properly connected

with the router, and then press "Next". Follow the instructions on the display to perform the

connection test.

Wireless LAN connection by the WPS method:

(_Select "Wireless" and press ENTER. (2>_Follow the instructions on the display, and finalize

the connection after testing its viabilky.

When no channel is received after "Antenna & Cable" was selected in step 6 and a search was carried out.

Show the input list: You can check the current

connection status of external equipment. Confirm which input terminal is connected to the set-top box.

OK: Clicking "OK" will complete the EZ Setup

procedure.

, When you change the network settings, refer to Initial

Setup > Interact Setup > Network Setup. (See pages 43 to 44.)

, Ifno channel is found, confirm the type of connection

made wkh your TV and try "EZ Setup" again. (See page 25.)

, To see the list of channels found during Channel

search, press INPUT, and then press _-.

, This may not display correctly depending on the

connected equipment.

, This is not displayed correctly when the connected

equipment is off.

, To watch TV using a set-top box, press INPUT

after completing the inkial settings, and select the input to which the set-top box is connected.

_-14

, For changing the settings of the initial Installation,

perform "EZ setup" on the Inkial Setup menu on page

25.

Page 17

Direct Button Operation

POWER

D PowE_

DISPLAY(souRce;

rm CC3

STB DVD,VC£ AUDIO

CC3 _ CC)

6 dh

OPTION SLEEP AUDIO FREEZE

@@@ @@@ @@@

SmartCentral

,R,I ! ii!

You can change channels in several ways,

Method 1 Using CH/VV on the remote control unit or on the

TV, Method 2 Using remote control buttons 0-9, • (DOT).

Examples: To select a 1 or 2-digit channel number (e. g.,

Channel 5):

Press 5 _ ENT.

To select a g-digit channel number (e. g., Channel

tt5):

Pressl_ I_5_ENT.

To select a 4-digit channel number (e. g., Channel

22.1):

Press 2 _ 20 * (DOT} _ 1 _ENT.

Method 3

Selecting the program from the Channel list. 1 Press INPUT on the remote control unit.

The iNPUT list displays.

2 Press _/1_ to select "AIR" or "CABLE".

The Channel list displays.

:3 Press ,L/V to select the desired channel, and

then press ENTER,

When selecting a 1-digR channel number, R is not

necessary to press 0 before the number.

When you enter 0-9 only, channel selection will be

made if there is no operation within a few seconds.

if you push "0" by Rself, nothing will happen. Complete the above steps within a few seconds. When you enter 0-9 and o (DOT), channel selection will

be made if there is no operation within a few seconds.

_t _ _ .... _

You can change the volume by pressing VOL +/-

on the TV or on the remote control unit.

To increase the volume, press VOL +. To decrease the volume, press VOL-.

Audio status

Speaker Variable sound Mute

When "Output Select" is set to "Variable", the indicator on the screen changes as shown below.

Mutes the current sound output. Press MUTE,

"(_/" will be displayed on the screen for 30 mklutes,

and the sound is silenced.

Within 30 minutes of pressing MUTE, mute can be canceled by pressing VOL+/- or MUTE.

Mute will be canceled after 30 minutes have passed. However, the TV will not suddenly output a loud sound

as the volume level is set to 0 automatically.

, . _,*_ .......

Allows you to capture and freeze a moving image

that you are watching, Press FREEZE.

A moving image is captured.

Press FREEZE again to cancel the function.

When this function is not available, "No displaying still

image available." will display.

The still image automatically goes out after 30 minutes.

If you are using the freeze function and a broadcast activates the V-CHIP BLOCK, the freeze function will be canceled and a V-CHIP BLOCK message will appear. You can have the same settings by choosing "Freeze" on the menu items. (See page 23.)

l"o view external source images, select the input source by pressing INPUT on the remote control unit or on the lV,

1 Press INPUT,

The INPUT list screen displays.

2 Press A/Y or press INPUT again to select the

input source,

An image from the selected source automatically displays. Each time INPUT is pressed, the input source toggles. If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.

See pages 10 to 12 and 38 for external equipment connection.

Press FLASHBACK to switch to the previously

tuned channel or previous input mode.

Press FLASHBACK again to swRch back to the currently tuned channel.

FLASHBACK will not work if no channel has been changed after the TV is turned on.

[% ;_:> ;

Allows you to directly activate various types of applications.

1 Press SmartCentral to display the application

window,

Press SmartCentraJ again to display a list of applications by category.

2 Press _l/ll_(or J,/V) to select the desired

application, and then press ENTER.

If you changed the display to the list of applications in step 1, select a category and then an application. See page 46 for details. if "_" is displayed after you switch to USB mode, check the USB connection. If "a:B_" or "D_m" is displayed after you switch to Home Network (DLNA) mode or after you connect

to the Internet, check your -rv's network settings

and connection.

* See pages 33, 44 to 46 for details of viewable

applications. You can display the application window by choosing "APPS" on the menu ferns. (See page 23.) When this function is not available, "Can not operate this function now" will display.

See page 24 for details on the Output Select function.

@-15

Page 18

Direct Button Operation

Displays the Netfiix screen, Press NETFLIX,

, To enjoy Netfiix, you need to make:

--a broadband Internet connection (See page 43.)

--settings of Intemet Setup (See pages 43 to 44.)

--adjustments for Netfiix (See page 46.)

[] MTS/SAP stereo mode The TM has a feature that allows reception of sound other than the main audio for the program. This

feature is called Multi-channel [elevision Sound (MTS). The TV with MTS carl receive mono sound,

stereo sound and Secondary Audio Programs (SAP). The SAP

f_)ature allows a '1%/station te broadcast other information, which could be audio in another language or something completely different like weather informatien.

You can enjoy Hi-Fi stereo sound or SAP broadcasts where available. * Stereo broadcasts: View programs like live sporting

events, shows and concerts in dynamic stereo sound.

, SAP broadcasts: Receive TV broadcasts in either

MAIN or SAP sound. MAIN sound: The normal program soundtrack (either in mono or stereo). SAP sound: Listen to a second language, supplementary commentary or other information. (SAP is mono sound.)

If stereo sound is difficult to hear. , Obtain a clearer sound by manually switching to fixed

mono_sound mode.

You can change MTS as shewn below to match the television broadcast signal,

Press AUDIO to toggle between audio medes, Examples: when receiving MTS and SAP

STE}.!RE}.!Omode: STEREO_ MONO STEREO + SAP mode: ST(SAP)_ SAP(ST)_ MONO

11" I MAIN _-SAP mode: MAIN_SAP MONO mode: MONO

[] Digital broadcasting audio mode The types of audio transmitted in a digital broadcasl include SURROUND as well as MONO and STEREO. in addition, it is possible for multiple audio tracks to accompany a single video track.

Press ENTER to toggle between audio modes,

Example: when receiving Digital broadcasting STEREO (Audio1) _ STEREO (Audio2)

It....... SURROUND (Audio3) _....J

, MTS only operates while in TV mode. , You can have the same settings by choosing "Change

Audio" on the menu items. (See page 23.)

Allows you to set a time when the TM autemafically

switches to standby. Press SLEEP, , The remaining time displays when the sleep timer has

been set.

, Each time you press SLEEP, the remaining time

switches as shown below. off_30_ 60_90 _120

lr !

, When set, the time automatically starts counting down. , Ifyou want to adjust the sleep timer, you can press

SLEEP twice then change the time setting.

, When it is 5 minutes before the time expires, the

remaining time will start to keep appearing every minute.

o Select "Off" by pressing SLEEP to cancel the sleep timer. , The TV will enter standby when the remaining time

reaches 0.

AV MODE gives you several viewing options

to choose from to best match the surrounding engronment of the TV, which can vary due to factors like room brightness, type of program watched or the type of device connected.

You can use USER Mode to create customized

settings for each TV input These settings will be automalical@ saved on each input for convenience.

Press AV MODE, Current AV MODE displays. , Press AV MODE again before the mode displayed on

the screen disappears. The mode changes as shown below:

, Example:

When using the COMPONENT IN, VIDEO IN t or 2 terminals

STANDARD _ MOVIE _ MOVIE THX _ GAME

l I

DYNAMIC (Fixed) _ DYNAMIC _ USER [TV]

" Example:

When using the PC IN or HDMI IN t to 4 terminals

STANDARD _" MOVIE _ MOVIETHX _ GAME

l '

DYNAMIC (Fixed) _ DYNAMIC _ USER[ me]

STANDARD: For a high@ defined image in a normal

lighting. MOVIE: For a movie. MOVIE THX: Changes the image quality so that it

conforms to the THX display standard. GAME: Suitable for game playing. You carl configure

the settings according to the type of the game.

PC: For PC. USER: Allows the user to customize settings as

desired. You can set the mode for each input

SOUrCe. DYNAMIC: For higher image resolution. You can

enjoy an extremely high resolution picture on an

input signal of 2K (full high vision signal). DYNAMIC (Fixed): Changes the image and

sound settings to the factory preset values. No

adjustments are allowed.

, You can select a different AV MODE item for each

input mode. (For example, select STANDARD for TV input and MOVIE for COMPONENT.)

, When you play games, "GAME" is recommended for

AV MODE.

, You cannot set "PC" when the TV is connected to the

Internet.

, You cannot set "GAME" or "PC" when the input source

is "Home Network (DLNA)" or "SD/SDHC/USB".

, You can have the same settings by choosing "AV

MODE" on the menu kems. (See page 21 .)

_-16

Page 19

Direct Button Operation

Your 'f_/is equipped with an interna( Ck)sed Caption decoder. (t allows you to view conversations, narration and sound effects as subtitles on your TM. Closed Captions are available on some TM programs and on some VHS home video tapes at the discretion of the program provider.

Digita( Closed Caption service isa new caption service available only on digita( FM programs (also at the discretion of the service provider). (t is a more flexible system than the original Closed Caption system, because it allows for a variety of caption sizes and font styles. When the Digital Closed Caption service is in use, it wil( be indicated by the appearance of a 3-(etter abbreviation that also indicates the language of the Digital Closed Captions: ENG (English), SPA (Spanish), FRA (French) or other language codes.

Not all programs and VHS videotapes offer closed captions. Please look for the "[_]" symbol to ensure that captions will be shown.

In the Closed Caption system, there cars be more than one caption service provided. Each is identified by its own number. The "CC1" and "CC2" services display subtitles of 'iM programs superimposed over the program's picture.

In the Closed Caption system, the "Text1" or "Text2" services display text that is unrelated to the program being viewed (e.g. weather or news). These services are also superimposed ow_rthe program currently being viewed.

1 Press CO.

This will present the Closed Caption information

display.

2 Press CC while the Closed Caption information

is .stillorsthe screen.

Press repeatedly until you select the desired closed caption service.

C)osed Caption information

Depending on the number of caption services in the

signal being received, you will see information such as

1/2 or 1/4 displayed. 1/2 means "the first of two services".

Example:

If a program has three services (Digkal CC(ENG), OO1 and Text1), the closed caption display will toggle in this sequence:

|-_-,|-_

t i

The CC button keeps a record of the last service selected in Rs memory.

If the last closed caption mode (e.g. 1/3 ENG) you selected is not available for the next program, or on another channel, the closed caption service that is available is automatically selected, and this service appears in parentheses, e.g. "1/3(OO1)". Closed Caption services that appear in parentheses will

not be stored in the CO button's memory as your last selected service. Only services that you have selected with the CO button are stored.

Examples:

In a case where there are two closed caption services provided (for instance, Digital CC(ENG) and CC1), and Digital CC(ENG) is displayed as your current selection, if Digital CC(ENG) is not broadcast for the next program, the other closed caption service, CC1, will be displayed in parentheses.

A closed caption service appears in parentheses

because the service you selected is not available and a different service is displayed on your screen. "1/1 (CC1)" is displayed instead of "1/2/ENG".

When "Power Saving" is set to "Standard" or

"Advanced", the Power Saving leaf icon appears on the channel information window. See page 23 for details of Power Saving settings. See page 24 for detailed closed caption settings. When the program contains no closed caption, "--" displays in the closed caption information.

if the language code, e.g. "ENG", is not found on

DigRal TV programs, "--" will be shown.

Four kinds of closed caption service (OO1, C02, Text1, Text2) are potentially available, but a broadcast may contain none or only some of these services at the discretion of the program provider. When a web page is displayed, Closed Captions are

not available. You can have the same settings by choosing "Change

00" on the menu items. (See page 23.)

You cars select the screen size.

1 Press ViEW MODE.

• The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received.

2 Press ViEW MODE or A/V while the View Mode menu is displayed to select a desired item on the menu.

You can sequentially select a View Mode that has Rs own aspect ratio.

You can have the same settings by choosing "View Mode" on the menu items. (See page 23.)

Each time you press VIEW MODE when a browser screen is shown, the display pattern toggles between a website- only screen and a TV+Web screen. You may not be able to change the View Mode while in 3D mode. The View Mode is fixed to "Dot by Dot" when 4K signal is input.

m For HD programs

Stretch

Suitable for viewing wide- screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at the top and bottom of the screen.

Dot by Dot (Full Screen}

Dot by Dot (1080i/ p only): Detects the

resolution of the signal and displays an image with the same number of pixels on the screen.

Full Screen (720p only): You can select

"Full Screen" only when

receiving a 720p signal.

S.Stretch (Smart stretch)

Sukable for stretching 4:3 programs to fill the screen.

Zoom

Suitable for viewing wide- screen 2.35:1 aspect-ratio programs in full screen.

When using Dot by Dot or Full Screen, Ris possible to see noise or bars around different outer portions of the

screen. Please change view mode to correct this. m For 4:3 programs Example: Screen size images

Side Bar Zoom Stretch

Suitable for viewing conventional 4:3 programs

in their normal format.

S.Streteh (Smart stretch}

Suitable for stretching 4:3

programs to fill the screen.

SuRable for viewing wide- screen 2.35:1 anamorphic DVDs in full screen.

This mode is useful for

1.78:1 DVDs. When viewing 1.85:1 DVDs,

stretch mode will still show very thin black bands at the top and bottom of the screen.

_-17

Page 20

Direct Button Operation

[] For USB-Video, SD-Video, DLNA-Video or Internet applications Example: Screen size images

[] For PC Example: Screen size images

Input signal

Auto

Keeps the original aspect ratio in a full screen display.

Original

Displays an image by an original size.

Stretch

An image fully fills the screen.

Normal Zoom Dot by Dot

For viewing widescreen

programs. The top and bottom of the image is cropped.

Keeps the original aspect ratio in a full screen display.

Stretch

C)l

An image fully fills the screen.

Detects the resolution of

the signal and displays an image

with the same number of pixels

on the screen.

Input signal

16:9

Stretch

An image fully fills the screen.

Dot by Dot

Detects the resolution of

the signal and displays an image with the same number of pixels on the screen.

Oonnect the PC before making adjustments. (See page 12.) Selectable screen size may vary wkh input signal type.

_-18

Page 21

On=Screen Display Menu

LCFONT embedded

=®

® ®

(1} Guide display

, This indicates the buttons that can be operated on the displayed screen. The guide display varies depending on

the menu setting screen.

, The operations for some selected items may be displayed in the operational guide bar at the bottom of the

screen.

(2} Item displayed in blue

, This indicates the kern currently selected. , Press ENTER to go to the adjustment screen for this item.

(3} Item in brackets

, This indicates the current setting for the item.

_4} Item displayed in white

, This indicates that the item can be selected.

(5} Item displayed in gray

, This indicates that the item cannot be selected.

There are various reasons why the kems cannot be selected, but the main reasons are as follows:

-- Nothing is connected to the selected input terminal.

-- The function is not compatible with the current input signal.

[] About Menu items , Some menu kems may not be displayed depending onthe selected input source.

, The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may

vary slightly from the actual screens.

, The order of explanations for each menu kern in the following pages is not necessarily in accordance wkh the

alignment of the kems on the screen.

LCFONT:

, This product is embedded wkh LC Font technology, which was developed by SHARP Corporation for dearly

displaying easy-to-read characters on LCD screens.

1 Press MENU to display the MENU screen. 2 q} Press 4/_ to select the desired menu.

(2} Press ,J,/V to select a specific adjustment item, and then press ENTER.

, Additional related adjustment items may be displayed. Press A/V to select the desired item.

(3} Adjust the item while referring to the guide display.

, Operations vary depending on the function or kern. Refer to the guide display corresponding to the menu

setting screen for button operations.

3 Press MENU to exit.

, Menu options differ in the selected input modes, but the operating procedures are the same.

Using the remote control Use the following buttons on the remote control to operate the menu.

MENU: Press to open or close the menu screen. J,/Y/41/_: Press to select a desired item on the

screen or adjust a selected item.

ENTER: Press to go to the next step or

corrlplete the setting.

RETURN: Press to return to the previous step.

Using the control panel of the TV

You can also operate the menu with the control

panel of the IM. Button operations on the control panel correspond

to the ones on the remote control as shown below.

MENU: MENU ors the remote control.

iNPUT: ENTER ors the remote control. CH/X,/V: Cursor A/Y en the remote control. VOL+/- : Cursor _/_ ors the remote control.

@-19

Page 22

On=ScreenDisplay Menu

Picture Settings

Example

_ Audio Settings _ System Options _ Initial Setup

Example Example Example

Auto Volume ................................................ Page 22

Treble .......................................................... Page 22

Bass ............................................................ Page 22

Balance ....................................................... Page 22

3D Surround ................................................ Page 22

Bass Enhancer ............................................ Page 22

Clear Voice ....................................... Page 22

Reset ........................................................... Page 22

Power Control

Example

Audio Only ................................................... Page 23

Power Saving .............................................. Page 23

No Signal OFF............................................... Page 23

No Operation OFF......................................... Page 23

AV MODE

(Changing Pic,Quality) .................... Pages 21 and 31

THX Room Mode Setting ............................. Page 21

OPC ............................................................ Page 21

Backlight ..................................................... Page 21

Contrast ...................................................... Page 21

Brightness ................................................... Page 21

Color ........................................................... Page 21

Tint .............................................................. Page 21

Sharpness ................................................... Page 21

Advanced ............................................. Pages 21-22

Resolution ........................................ Page 21

Focus .............................................. Page 21

Color [em p ..................................... Page 21

Motk)n Enhancement ....................... Page 21

Multiple Pixel Drive ........................... Page 21

Gamma Adjusiment ......................... Page 21

Black Level ...................................... Page 21

Film Mode ........................................ Page 21

Digital Noise Reduction .................... Page 22

Menochrome ................................... Page 22

Range of OPC ................................. Page 22

Reset ........................................................... Page 21

View Option ......................................... Pages 23, 36

APPS ............................................... Page 23

USB Operation Panel ....................... Page 36

Home Network (DLNA)

Operation Panel ............................... Page 36

View Mode ....................................... Page 23

Freeze .............................................. Page 23

Change Audio .................................. Page 23

Change CC ...................................... Page 23

3D Setup ..................................................... Page 31

AQUOS LINK Setup .................................... Page 39

Terminal Setting ............................. Pages 23, 24, 41

Audio Setup ..................................... Page 23

PC input .......................................... Page 41

Audio Select .................................... Page 41

Input Skip ........................................ Page 23

Input Label ....................................... Page 24

HDMI Setup ..................................... Page 24

Output Select ................................... Page 24

Color System ................................... Page 24

Menu Design ............................................... Page 24

Channel Selecting Effect .................. Page 24

Program Title Display ....................... Page 24

Position ............................................ Page 24

Caption Setup .................................. Page 24

Game Play Time .......................................... Page 24

Operatien Lock Out ..................................... Page

Icon Light Up Setting ................................... Page

Standby Mode ............................................. Page

Wallpaper Setting ........................................ Page

Boot Picture ................................................ Page

Response Tone ........................................... Page

Demo Mode ................................................ Page

EZ Setup ..................................................... Page 25

Language ......................................... Page 25

Location & Time ............................... Page 25

R/l...ocatiorl ..................................... Page 25

Antenna & CabldSTB ...................... Page 25

Air/Cable .......................................... Page 25

OH Seamh ....................................... Page 25

Network ........................................... Page 25

Completed ....................................... Page 25

Broadcasting Setup ..................................... Page 25

CH Setup ......................................... Page 25

Favorite CH ...................................... Page 25

Antenna Setup-DIGIT;a,L ................... Page 25

Internet Setup ........................... Pages 36, 41,43-44

Bluetooth Setup .......................................... Page 26

l..anguage .................................................... Page 26

DivXc_Setup ................................................. Page 36

Individual Setup .................................... Pages 26-27

Secret No....................................... Page 26

Parental CTRL .......................... Pages 26-27

Wall Mount Audio Setup .............................. Page 26

Reset ........................................................... Page 26

_) information

Example

24 Identification ................................................ Page 27

24 Digital Caption Into ..................................... Page 27

24 Software Update .................................. Pages 27-29

25 Manual Update ......................... Pages 28-29

25 Auto Update Setting ........................ Page 27

25 Software License ......................................... Page 50

Netfiix Help .................................................. Page 46

VUDU Help .................................................. Page 46

_- 20

Page 23

On=Screen Display Menu

Automatically adjusts tile brkjhtness of the screen. For a better white balance, use color temperature Set this function when two or more people are going Adjusts the picture to your preference with the Off: The brightness is fixed at the value set in correction, to watch a TV program or when you are viewing the following picture settings. "Backlight". High: Whke with bluish tone screen obliquely.

On: Automatically adjusts. Mid-High: _ On: For wider viewing angle. On:Display: Displays the OPC effect on the screen Middle: $ Off: Normally choose this.

, For operating the on-screen display menu, see page 19. while adjusting the brightness of the screen. Mid-Low:

Low: WhRe with reddish tone

Baeklight The screen The screen Adjusts the differences of picture tenes between

dims brightens , When set to "On", the Optical Picture Control (OPC) Low (Xenon}, Low (Carbon are}: Available only bright paris and dark parts. The adjustment range

Contrast For less For more senses the surrounding light and automatically adjusts when AV MODE is set to "MOVIE" MODE. Use of the gamma can be set to a maximum of +3 and a

contrast contrast the backlight brightness. Make sure nothing obstructs one of these ReDs to make picture color become minimum of -3 by pressing 41 or _.

Brightness For less For more the OPC sensor, which could affect ks abilky to sense more reddish.

brightness brightness surrounding light. White balance can be adjusted between a maximum of Le_i

Color For less color For more color , When set to "On:Display", OPC effect displays on the +30 and a minimum of -30 for each color temperature. Adjusts on-screen black level to your preferred lew_l.

intensky intensity screen while the OPC adjusts the screen brightness. R Gain (LO/HIJ/G Gain (LG/HIJ/B Gain (LO/HI} High; The black level gets brighter.

Tint Skin tones Skin tones

become become I I m Fine tuning the color temperature Low: The black level gets darker.

reddish greenish _ To fine tune the coler temperature, set "10 Point

Sharpness For less For more Setting" to "On".

sharpness sharpness You car] adjust the "Positiorf setting. Adjust the set , "Black Level" is available for input signal from

, For resetting all Picture adjustment items to the factor, color temperature from _-1 to +10. ComposRe Video, Component 480i and analog

preset values, press A/Y to select "Reset", press White balance car] be adjusted between a maximum broadcasts (air and cable).

ENTER, press A/_' to select "Yes", and then press ( of +30 and a minimum of----30 for each color ENTER. temperature.

[_._:_ _ _,.,_!_ _ _f,_._. _ _f_ _ _.,_ ?f_ .... ThiSimagesfUnctiOr]originallyprovideSencodedhigh-qualitYat24 frames/second,playbackof

This TV provides various advanced functions for • When "Position" is set to "10", you can adjust the white such as films.

The aDdle and video settings car] be changed to suit optimizing the picture quality, balance between -30 and 0. Advanced High: Provides smoother image motion the program or input content being watched.

, For resetting all adjustment kems to the factory preset while ensuring high-qualky playback.

..........................................................................................................................................................................values, press A./Y to select "Reset", and then press Advanced: Adjusts effect to reduce judder from film

Adjusts the fineness (resolution) of the picture in the ENTER. contents. , The Delectable items vary depending on the input range 0 to _-10. Standard: Plays back images with equal display

source, time for each frame, reproducing movie theater

, For details of the Delectable items in 3D mode, see ...................................................................................................................................................................

page 31. Use Motion Enhancement to view fast-action vkJeo experience.

, You can select AV MODE by pressing AV MODE on , "Resolution" is not available when you set AV MODE to more clearly. Off: Normal viewing mode.

the remote control unit. See page 16 for details of AV "PC", "3D" or "GAME (3D)".

MODE settings. , When using any of the HDMI IN 1 to 4 terminals and

inputting a 3840 x 2160 signal, you cannot select Turn the LED backlight on or , "Film Mode" does net function depending on input "Resolution". off for 120Hz drive display, signal type.

Adjust the picture to room illumination or ambient 120Hz High , "Film Mode" does not function when you set AV MODE

............................................................................ 120Hz Low For obtaining a clearer image, to "GAME" or "PC".

brightness. This function is available only when AV Adjusts the sharpness (crispness) of the picture in , "Standard" does not function depending on input MODE is set to "MOVIE THX". the range 0 to +10. Off Original image, signal type.

Bright room: Select this kern for a bright room. Dark room: Select this item for a dark room.

, "Focus" is not available when you set AV MODE to

"PC", "3D" or "GAME (3D)".

, When using any of the HDMI IN 1 to 4 terminals and

inputting a 3840 x 2160 signal, you cannot select "Focus".

, "Motion Enhancement" may cause image noise. If this

occurs, turn the function "Off".

, When AV MODE is set to "GAME" or "PC", or PC

format is being input, "Motion Enhancement" is not available.

_-21

Page 24

On=Screen Display Menu

Produces a clearer video image.

Auto: Automatically adjusts the level of noise

reduction.

High/Middle/Low: You can select a desired level

for viewing a clearer video image.

Off: No adjustment.

, "Digital Noise Reduction" is not available when you set

AV MODE to "PC" or PC format is being input.

, When AV MODE is set to "GAME", "AUTO" is not

available.

i{!i{__i_i_i_iiiii¸_i_i_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!!!3!i_;!_i!_i_!!i!,i!,i!,i!,i!,i!,i!,i!¸i!_i!¸_!!!!i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!i!!!_!!_!!_!!_!!_!!_!!_!!_!!_!!_!i_i_i!i!i_ii!iii_i_ii_ii_i_!_!!_i_¸iiii_i_iiiii!!ii!_i_i!!!ii_i_!i!ili!i!!_i_i_iiiiii!_i_!_i_i_!_i!_i_i!!!ii_i_!i!ili!i!!_i_ii_iiii_i_!!

For viewing a video in monochrome.

The brightness level range of the OPC sensor's automatic adjusfments carl be set according te your preferences. The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of-16.

Max.: -15 through +16 Min,: -16 through +15

, The "Range of OPC" settings are active only when

"OPC" is set to "On".

, The maximum setting cannot be set to a smaller

number than the minimum setting.

, The minimum setting cannot be set to a bigger number

than the maximum setting.

• Depending on the brightness of the surrounding light, the

OPC sensor might not operate if the adjustment range is small.

• e = •

You carl adjust the sound quality to your preference with the following settings.

For operating the on-screen display menu, see page 19.

Treble For weaker For stronger

treble treble

Bass For weaker For stronger

bass bass Decrease audio Decrease audio

Balance from the right from the left

speaker speaker

The surround function produces Surround effect from the speakers.

3D Stadium: Reproduces lifelike experience of

exckements such that live sports or concert performances in a stadium create.

3D Hall: Reproduces concert hall experience wkh

realistic live surround sound using measured reverberant sound in the concert hall.

3D Movie: Reproduces movie theater experience

with realistic live surround sound using measured reverberant sound in the movie theater.

3D Standard: Creates 3 dimensional surround

sound wkh detailed control of the signal phase.

Normal: Provides mild surround sound. Off: Outputs the normal sound.

, The Audio menu is grayed out when "Output Select" is

set to "Variable". (See page 24.)

, For resetting Audio adjustment kems to the factory

preset values, press _./V to select "Reset", press

ENTER, press _/_' to select "Yes", and then press

ENTER.

Different sound sources sometimes do not have the same loudness level, such as a program and its

commercial breaks, The Automatic Volume Control (Auto Volume) reduces this problem by equalizing

kwels,

High: Reduces the loudness gaps among different

sound sources strongly.

Middle: Low: Reduces the loudness gaps among different

sound sources slightly.

, The Audio Settings menu is grayed out when "Output

Select" is set to "Variable". (See page 24.)

, The Audio Settings menu is grayed out when "Output

Select" is set to "Variable". (See page 24.)

, For some discs, setup may be required on your BD/

DVD player. In this case, please refer to the operation manual of your BD/DVD player.

This function allows you to enjoy bass-enhanced sound.

, The Audio Settings menu isgrayed out when "Output

Select" is set to "Variable". (Seepage 24.)

This function emphasizes speech against

background neise for greater clarity,

, The Audio Settings menu is grayed out when "Output

Select" is set to "Variable". (See page 24.)

_- 22

Page 25

On=Screen Display Menu

Io A - e| o.

Power control setting allows you to save energy.

, For operating the on-screen display menu, see page 19.

' :_i ' #_ .......

When listening to music from a music program, you carl turn the screen off and enjoy audio only.

, The screen image will return to normal when a button

(except those for audio adjustment, such as VOL, MUTE) is pressed.

This function allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan.

Standard: Optimizes power reduction based upon

video content. When set to "Standard", "_?' appears on the screen.

Advanced: Optimizes power reduction based upon

video content and engages OPC. When set to "Advanced", "S_}" appears on the screen.

Off: This function does net work.

, "Power Saving" does not function when you set AV

MODE to "DYNAMIC (Fixed)".

, You cannot select a different Power Saving Rein for

each AV MODE. When "Power Saving" is set, the "OPC" settings for all AV Modes will automatically change.

-- If you set "OPC" to "On" when "Power Saving" is set to "Standard", then the "Power Saving" setting will change to "Advanced".

-- When you change the "Power Saving" setting from "Advanced" to "Off" or to "Standard", "OPC" will be set to "Off".

- "DYNAMIC (Fixed)" will remain set to "Off".

, When "Power Saving" is set to "Standard" or

"Advanced", the Power Saving leaf icon appears to the left of "OPC" in the Picture Settings menu screen.

, "Power Saving" is not available when the TV is in 3D

mode.

When this function is enabled, the /_/automatically

shuts down if no signal is received for more than 15 minutes,

, When it is 5 minutes before the power shuts down,

the remaining time will start to keep appearing every

minute.

, When a TV program finishes, this function may not

operate.

When you enable this function, the /_/automatically

shuts down if no operation is performed for more than 3 hours.

, When it is 5 minutes before the power shuts down,

the remaining time will start to keep appearing every

minute.

, For operating the on-screen display menu, see page 19.

These functions are useful for adjusting the audio and video settings. The View Option functions can be operated with the remote control unit.

The application window carl be displayed by selecting "APPS" ors the MENU screen.

, You can display the application window by pressing

SmartOentral on the remote control unit. (See page

15.)

w_ _a

This function changes the screen size. Select "View Option" on the menu te display the

View Mode menu screen. The View Mode menu varies depending on the input

source.

, You can select View Mode by pressing VIEW MODE

on the remote control unR.

-- See pages 17 and 18 for adjusting the video being input from a TV, other audiovisual equipment, USB-Video, SD-Video, DLNA-Video or Internet applications.

-- See page 18 for adjusting the video being input from

Allows you to change the Closed Caption display. Select "Change CC" ors the menu to display the Closed Caption inforrnation.

, The information displayed varies depending on the

program you are watching.

You can change Closed Caption by pressing CC on the remote control unit. See page 17 for details of Closed Caption function.

You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUT terminal on the

TV. Please selec£ an audio oLRpLR format compatible with the audio format of the program you are watching and the equipment connected.

PCM: For connecting to equipment that does not

support Dolby Digital and DTS. The same audio (main, sub, or main/sub) as the audio of the program being viewed is output. 2-channel audio wRh a sampling rate of 48 kHz or less is output as linear PCM audio.

Bitstrearn: For connecting to an audio system that

supports Dolby Digital and DTS. Audio is output through both the main and sub channels.

a PC.

Analog channel audio and video input audio are output in POM mode even when "BRstream" is selected.

POM digital input signals are output in PCM mode even when "Bitstream" is selected.

, You can select Freeze by pressing FREEZE on the

remote control unit. See page 15 for details of Freeze function.

Allows you to change the audio when multiple audio

is available for the program you are watching.

If you connect external equipment to an HDMI IN terminal which you have set to be skipped, a notification message appears on the display when a signal is received from the connected external equipment. Press "Yes" to reset the related skipping setting so that the input terminal becomes available.

, You can change Audio by pressing AUDIO on the

remote control unit. See page 16 for details of Audio function.

@- 23

Page 26

On=Screen Display Menu

Lets you set the input terminal displayed when using the INPUT list or channel display. Press A/V/_I/iI_ to select the new name for the input mode.

Using the software keyboard, you can enter up to 10 characters for text. (See page 44.)

You cannot change labels if the input source is ]%/, Home Network (DLNA) or SD/SDHC/USB.

When you view images sent from exlernal equipment in an HDMI connection, this Iunction allows the

image size on the IM to automatically switch to an appropriate one.

Refer to your external equipment operation manual for the signal type.

When connecting a DVPHDMI conversion adapter/

cable to the HDMI IN terminal, the image may not come in ciearJy.

Allows you to select whal controls the audio output.

Fixed: Sound via speaker is adjusted wkh VOL +/-

on the remote control unit or on the TV. Sound via the AUDIO OUT terminal is not adjustable and outputs at a consistent level.

Variable: Sound via the AUDIO OUT terminal is

adjusted with VOL +/- on the remote control unit or on the TV. Sound via speaker is muted.

Select the CH display when changing channels for digital broadcasting.

For adjusting a picture's horizontal and w_rtical position.

H-Pos.: Centers the image by moving Rto the left or

right.

V-Pos.: Centers the image by moving Rup or down.

For resetting adjustments to the factory preset values, press _/_ to select "Reset", and then press ENTER.

When connecting a PC to the HDMI IN terminal, the

image position will be automatically adjusted. It cannot

be manually adjusted. The screen posRion variable ranges depend on the View Mode or the signal type. The ranges can be seen on the positiomsetting screen. Adjustments are stored separately according to input source.

* "Position" does not work when SD/USB mode, Home

Network (DLNA) mode or an Intemet application is

used.

* You may not be able to adjust the position while in 3D

mode.

This function allows you to adjust the closed caption screen appearance to suit your preference.

Caption Size/Font Style/Foreground Color/ Foreground Opacity/Background Color/ Background Opacity/Character Edge

select the video sigr_al system compatible with your

equipment from the list below:

Auto/NTSC/PAL- M/PAL- N

"Color System" can one/be set for the VIDEO IN 1 or 2. If you have already set the Secret No., input the 4-digk secret number here. See page 26 for setting a secret number.

For resetting adjustments to the factory preset values,

press _/T to select "Reset", and then press ENTER. The default value depends on the broadcasting station.

_¢_ _ .......

This function will enable the TM to display the elapsed time every 30 minutes, so thai you do not become too absorbed in game playing to keep track of time. Switch AV MODE to "GAME" to activate the function.

You can select whether to use transition effects when changing channels.

In some cases, "Channel Selecting Effect" does not

work.

_- 24

_ _' _*_ _;_ .......

This function k)cks the operation buttons on the TM and the remote control.

Off: No adjustment. Re Control Lock: All buttons on the remote control

are locked.

Button Control Lock: All buttons on the TV, except

POWER, are locked.

When "RC Control Lock" or "Button Control Lock" is

selected, a confirmation screen appears. Yes: Locks the operation buttons. No: No adjustment.

For the wallpaper, you can select either the still images

preqnstalled in the TV or your favorite still images stored

in the USB memory device or SD memory card.

Pre-lnstalled: The images preqnstalled in the TV will

be displayed in a slideshow.

SD/SDHC/USB: Your favodte images stored for the

wallpaper will appear.

if only a single still image is stored in the USB memory device or SD memory card, that image will be displayed as the wallpaper. When there are multiple still images in the memory, all the images will be displayed in a slideshow.

To unlock the buttons on the remote control by using the control panel of the TV (see page 19):

(]_Press MENU to display the MENU screen, press

VOL +/- to select "System Options", and then press INPUT.

(2>_Press CHA/V to select "Operation Lock Out",

and then press INPUT.

_Press CHA/V to select "off", and then press

INPUT.

_Press MENU to exk. To unlock the buttons on the TV, press MENU on the remote control, and then select "Off" in "Operation

Lock Out ".

When this function is set to "Off", the POWER/

TIMER/3D indicators on the front of the IM do not

work.

"On" is the factory preset value. If you want to turn off the LED, set the function to "Off".

When this function is activaled, you can reduce

the 'l_/'s start-up time or even let the '1_/in standby mode start displaying images and so on via the connected equipment on the network.

Setting "Standby Mode" to "On" consumes more

power.

This function is available only when "Standby Mode" is set to "On (Wallpaper Mode)".

Activating the function will display still images when

the IM is in standby mode.

Images are displayed in 3-minute intervals as a slideshow.

When the TV is in Wallpaper mode, you can turn off the TV by pressing and holding POWER on the TV for 5 seconds.

Just before the TV turns off, the last image shown when the TV was turned off appears briefly. Your settings may not be saved in some cases.

[] When you display images by using the USB

memory device or SD memory card: Create a folder named "WP" in the root directory of the USB memory device or SD memory card (the first directory when the USB memory device or SD memory card is opened), and store into the folder the still images you want to display for the wallpaper. You must insert the USB memory device or SD memory card to the TV before turning off the TV. If there are images on the USB memory device or SD memory card but they do not appear on the screen,

switch to USB mode or SD mode and check whether the image files on the USB memory device or SD

memory card are shown correctly.

You can set the length of time the TV will remain in the Wallpaper Mode.

3 hours/6 hours/12 hours/24 hours

No buttons except for POWER work even while the still images are being displayed. If the ready-for-use USB memory device or SD memory card is not inserted, the still images preqnstalled in the TV will be displayed in a slideshow even when "Data Source" is set to "SD/SDHC/USB". Because the USB memory device or SD memory card cannot be detected immediately after the TV is turned on from standby mode, the wallpaper preqnstalled in the TV may be displayed even when "Data Source" is

set to "SD/SDHC/USB". The still images will be displayed until the set time has

elapsed. If you do not want to use the wallpaper as described above, set "Standby Mode" to "On" or "Off".

Page 27

On=Screen Display Menu

With this furlction activated, the SHARP logo will be displayed when you turn on the IV,

, This function is not available when the TV is set to

"Standby Mode".

With this item set to "On", the lV will give off operation sound when you use the SmartCentral function,

, Ifanexternal speaker is used, the operation sound will

not be heard.

You can select the image from sew_ral types of demo mode,

, This function will be canceled when you press EXIT on

the remote control unit.

, "Demo Mode" may not be selected depending on input

signal type or application status.

, "Demo Mode" may be automatically canceled

depending on input signal type.

, For operating the on-screen display menu, see page 19. , When you select "EZ Setup", "OH Setup", "Parental

CTRL" or "Reset", you can enter the 4-digit secret

number here. See page 26 for setting a secret number.

You can run F!Z Setup again, even after setting up

the preset channels.

Language: Select from among 3 languages (English,

French and Spanish).

Location & Time: Make settings for the country,

area and time zone where you use the TV. Select your country: Select either "United

States", "Canada" or "Mexico".

Select your time zone: Select your time zone.

The available settings differ depending on the selected country.

Select DST (Daylight Savings Time}: Select

"Auto", "Manual" or "Off".

TV Location: Select "Home" or "Store" for the

location where you plan to install the TV. Home: "Power Saving" is set to "Advanced", and

AV MODE is set to "STANDARD".

Store: "Power Saving" is set to "Off" and AV

MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to

"DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off". if you select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if there is no operation for 30 minutes. When "Off" is selected, AV MODE

will be set to "DYNAMIC (Fixed)".

Feature Demo: When "On" is selected, after

all the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes.

Antenna & Cable/STB: Select the type of

connection you will use to watch TV.

Air/Cable: Make sure what kind of connection

is made with your TV when selecting "Air" or "Cable".

OH Search: Channel auto search makes the TV look

for all channels viewable in the set area. , If "Cable" is selected for Antenna setting,

scrambled channels are removed after the Channel search has been completed.

Network: When you connect to the Intemet on the

TV, confirm the connection method and make

adjustments. , Wireless LAN connection is possible only when

the WPS (push button) method is used. If any other method is used, make settings by Initial Setup > Internet Setup > Network Setup. (See pages 43 to 44.)

Completed: The settings confirmation screen is

displayed. Confirm the information displayed on

the screen.

, See Inkial Installation on pages 13 to 14 for setting

each kem.

, Ifno channel is found, confirm the type of connection

made wkh your TV and try "EZ Setup" again.

, Ifyou select "Analog Search Start" and initiate the

channel search, the OH Memory for Cable Digital will be deleted.

If Initial Installation does not memorize all the channels in your region, follow the instructions below

to manually memorize the channels.

Air/Cable: Make sure what kind of connection

is made with your TV when selecting "Air" or "Cable".

OH Search: Channel auto search makes the TV look

for all channels viewable in the set area.

OH Memory: You can select the channels to skip in

each ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and DIGITAL (Cable). Or=: Skips channels. (Channel selection disabled

using OH A/V.)

Off: Does not skip channels. (Channel selection

enabled using DHA/V.)

Remove Scrambled OH: This function makes the

TV look for and then delete digital cable channels that are scrambled and so unavailable in the

set area. The process may take more than 20 minutes.

Yes: Starts to remove scrambled channels.

No: This function does not work.

This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. To register your favorite channel:

Select "Register" and then press ENTER. Press A/ Y/_/_ to select the poskion in the category, and

then press ENTER to register.

To delete your favorite channel:

Select "1 Data Clear" and then press ENTER.

Press A/_/_I/I_ to select the channel you want to delete, and then press ENTER. Select "Yes" and then press ENTER. To delete all the favorke channels, select "All Data

Clear".

, Before setting the channel, select the channel you

want to register as a favorite channel.

, You can display the "Favorite OH" screen by pressing

FAVORITE CH on the remote control.

In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the "Antenna Setup-

DIGI[_,L '' screen. If necessary, adjusl the direction of the antenna to obtain the maximum signal strength.

Signal Strength: The signal strength of DIGITAL

channel is displayed. The signal information is based on the current channel.

Channel Strength: Input the 2-digit channel number

to check the signal strength of the selected channel. Make sure the signal is strong enough

for each channel. , This function is available for DIGITAL (Air) only.

, See Inkial Installation on pages 13 to 14 for setting

each kem.

, Ifno channel is found, confirm the type of connection

made wkh your TV and try channel search again.

, Ifyou select "Analog Search Start" and initiate the

channel search, the OH Memory for Cable Digital will be deleted.

(_)- 25

Page 28

On=Screen Display Menu

Set this functk)n when using the bluetooth devices with your /_/,

See page 46 for how to use the devices,

, See also the instruction manual supplied wkh the

Bluetooth device.

, You can register up to 6 devices to the TV, but only

one keyboard and mouse can be used at a time.

, if a device for which "Selected" is displayed does

not operate properly, try searching and selecting the

device again.

o The keyboard or mouse may not operate properly

depending on the application being used.

, The Bluetooth device may not operate properly

depending on the device being used.

You can also select a language from the Initial Setup

menu. Select from among 3 languages: English, Frencl'l and Spanish.

_## Y9 ....

This selects the optimal audio for the program you are currently waiching even when the lM is mounted

to a wall,

If complex adjustments are made and the settings cannot be restored to normal, you cars reset the settings to the factory preset values, . Ifyou have already set the Secret No., input the 4-digit

secret number here.

, When you use the Bluetooth device with your TV for

the first time, you must make pairing between the

device and the TV. Once the pairing is correctly carried out, the Bluetooth device will be registered on the TV.

You can add, delete or select Bluetooth devices in the registralion. [] Addition of a Blaetooth Device Bdore making the settings, press the Connect button on the Bluetooth device you want to connect.

1 Press _1/1_ to select "Search", and then press

ENTER.

2 Model names of the detected devices will be

displayed. Select the device with the message "New" attached, and then press ENTER.

, When a keyboard is being paired wkh the TV, a

PIN code will be displayed. Enter the PIN code using the keyboard, and then press "Enter" key on

the keyboard.

, When you perform pairing operation on a mouse,

select "Yes", and then press ENTER.

3 After the message indicating the pairing is

complete has beers displayed, click "OK".

[] Deletion of a Bluetooth Device

1 Press A/V to select the device to delete, and

then press ENTER.

2 Press ,A./Y to select "Delete", and thers press

ENTER.

[] Selection of a Bluetooth Device

1 Press A./Y to select the device to use, and then

press ENTER,

2 Press A/Y to select "Select", and then press

ENTER,

, The Channel Setup settings will not be changed. , The Language settings will not be changed. , The Secret number settings will not be changed. , The TV Location settings will not be changed.

Allows you to use a secret number to protect certain

settings from being accidentally changed.

IMPORTANT: Three conditions must be met to enable the V-Chip (see pages 26 to 27): 1, Secret No, is registered.

2. V-Chip/V-Chip (DTV Only) settings have been made. . The "V-Chip (DTV Only)" will only be selectable

when a new rating system can be downloaded via digital broadcasting in the U.S.

3. "Status" is set to "On",

[] Setting Secret No. You can set and change the secret number by using 0-9.

Yes: Changes or sets the Secret No. No: The confirmation screen to clear the Secret No.

appears when the Secret No. has been set. When

the Secret No. has not been set, the previous

screen will be displayed.

[] Secret No. Clear

You cars clear your secret number.

Yes: Your secret number is cleared. No: Your secret number is not cleared.

V-CHIP is an electronic filtering device built into your

TM. This tool gives parents a great degree of control

over broadcasts accessed by their children. It allows

parents to select programs judged suitable for child

viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP f_)ature in your R/. "V-Chip" and "Status" will not be

selectable from the menu if you do not first configure your secret number.

, The U.S. has two rating systems for viewing content:

TV Parental Guidelines and movie ratings.

, The TV Parental Guidelines work in conjunction with

the V-CHIP to help parents screen out inappropriate television shows from their children.

, Movie ratings are used for original movies rated by

the Motion Picture Association of America (MPAA) as watched on cable TV and not edked for television. The

V-CHIP can also be set to block MPAA-rated movies.

, The setting automatically enters "Block" for any ratings

below your selection.

, If Status is not set to "On", the configuration settings

will not work.

[] MPAA (Voluntary movie rating system}

Example

, As a precautionary measure, make a note of your

secret number and keep k in a familiar place.

, Ifthe secret number is cleared, the Status setting

automatically sets to "Off". "V-Chip" and "Status" will not be selectable from the menu.

Used to enable or disable the parental control function. This function will not be selectable Irom

the menu if you do not first configure your secret number.

Press A/V to adjust the item to your desired position. "_" indicates the item is blocked, Press MENU to

exit.

G: General audiences. All ages admkted.

PG: Parental guidance suggested. Some material may

not be sukable for children.

PG-13: Parents strongly cautioned. Some material may

be inappropriate for children under 13.

R: Restricted. Under 17 requires accompanying parent

or adult guardian (age varies in some jurisdictions).

NO-t7: No one 17 and under admitted.

X: X is an older rating that is unified with N0-17 but may

be encoded in the data of older movies.

, Voluntary movie rating system only uses an age-based

rating.

_- 26

Page 29

On=Screen Display Menu

[] TV Parentam Guidelines

Example

Suggested age TV-Y: All children.

"13/-Y7: Directed to older children. TV-G: General audience.

TV-PG: Parental Guidance suggested. TV-14: Parents strongly cautioned. TV-MA: Mature audience only.

When setting an individual content-based rating

item:

1 Press _ or ENTER to access blocked content

items from the currently selected age-based rating item.

2 Press A/V to select an individual item, and then

press ENTER to unblock it ("_" is remeved). Repeat the same steps for the other items.

3 Press 41 or RETURN to register after all

individual content rating items are set.

Content FV: Fantasy violence.

V: Violence. S: Sexual skuation. L: Adult language. D: Sexually suggestive dialog.

FV V S L D TV-Y [_ [] [] [_] [_ TV-Y7 X [] [] [] []

W-G [] [] [] []

TV-PG X X X X TV-14 X X X X TV-MR X X X

Canadian Rating Systems (Canadian English ratings and Canadian French ratings} , The TV ratklg systems in Canada are based on the

Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television

programming.

, While violence is the most important content element

to be rated, the structure developed takes into consideration other program content like language,

nudky, sexuality and mature themes.

, When setting the V-CHIP on the Canadian system you

can choose either the Canadian English ratings or the Canadian French ratings.

[] Canadian English Ratings

E: Exempt: includes news, sports, documentaries

and other information programming; talk shows, music videos, and variety programming.

0: Children: Intended for younger children under the

age of 8 years. Pays careful attention to themes that could threaten their sense of security and well-being.

08+: Children over 8 years old: Contains no portrayal

of violence as the preferred, acceptable, or only way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on

the screen.

G: General: Considered acceptable for all age

groups. Appropriate viewing for the entire family,

contains very little violence, physical, verbal or

emotional.

PG: Parental Guidance: Intended for a general

audience, but may not be suitable for younger

children (under the age of 8) because [t could

contain controversial themes or issues.

14+: Over 14 years: Could contain themes where

violence is one of the dominant elements of the storyline, but [t must be integral to the

development of plot or character. Language

usage could be profane and nudky present within

the context of the theme.

18+: Adults: Intended for viewers 18 years and older

and might contain depictions of violence, which while related to the development of plot, character

or themes, are intended for adult viewing. Could

contain graphic language and portrayals of sex

and nudity.

[] Canadian French Ratings

E: Exempt programming. G: General: All ages and children, contains minimal

direct violence, but may be integrated into the plot in a humorous or unrealistic manner.

8arts+: General but inadvisable for young children:

May be viewed by a wide public audience, but could contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real skuations. Recommended for viewing with parent.

13arts+: Over 13 years: Could contain scenes

of frequent violent scenes and therefore recommended for viewing wkh parent.

16ans+: Over 16 years: Could contain frequent

violent scenes and intense violence.

18ans+: Over 18 years: One/for adult viewing. Could

contain frequent violent scenes and extreme

violence.

[] How to temporarily release the V-CHIP

BLOCK

When the V-CHIP BLOCK is working and censors

a broadcast, "V-CHIP HAS BEEN ACTIVATED." displays. 1 Press ENTER while the V-CHIP is working, and

then the secret number setting menu displays.

2 Input the 4-digit secret number by using 0-9. At

this time V-CHIP BLOCK temporarily releases.

[] Reactivating the temporarily released V-CHIP

BLOCK

You carl reactivate the temporarily released V-CHIP

BL.OCK as shown below. , Select "Status" setting from the Parental CTRL menu

to reactivate BLOCK. (See page 26.)

, Select "V-Chip" setting ("MPAA", "TV Guidelines",

"Can. English Ratings" or "Can. French Ratings") from the Parental CTRL to reactivate BLOCK. (See pages 26 to 27.)

, Swkch off the TV power.

, Performing any of the three above will activate the

V-CHIP BLOCK.

, For operating the on-screen display menu, see page 19.

The current version of the FV software is displayed.

This function allows viewing of digital closed caption

information for the digital broadcast program being

viewed.

, This list is not displayed for analog broadcasts or

external input audio/video.

, This information is not included in OO1, OC2, Text1, or

Text2, and is not displayed in a list.

_p, _ _*_ .... ,

This is used to upgrade the system software to enhance the lV functions.

1 Press MENU to display the MENU screen, and

then press 4/_ to select "Information".

2 Press ,i,/V to select "Software Update", and

then press ENTER.

, Ifyou have already set the Secret No., go to step 3. 3 Input the 4-digit secret number by using 09. 4 Press ,I,/V to select "Manual Update" or "Auto

Update Setting", and then press ENTER.

- The operations thereafter vary depending on the setting.

When the R/is on, or when an Intemet applicalion

is being accessed, this function enables the lV to connect to the network and check for updates automatically. When an update is available, a message is displayed.

Press 41/t_ to select "Yes", and then press ENTER to display the download screen. (See page 29.)

[] : The content rating carl be set, but this rating is

not normally broadcasl by TMstations.

X : Content rating carl be set.

, This function does not work when a broadband

connection or Internet Setup is not available.

, A message may also be displayed when an application

is running.The message varies depending on the application.

(_)- 27

Page 30

On=Screen Display Menu

_te ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; 3 Press ENTER to start checking the data in the 5 To update the lV software with the update file, 7 After the screen shown below is displayed, press

Select the method for manually updating the USB memory device, select "Yes", and then press ENTER. ENTER. software.

USB Update: Updates the software using a USB

memory device containing the update file. (See "Updating the Software wkh a USB Memory Device".)

Network Update: Downloads the update file via

the network and then updates the software. (See page 29.)

4 During the data checking, "Checking" blinks,

8 Remove the USB memory device.

* You cannot update the software using a SD memory

card containing the update file.

* A broadband connection and Internet Setup are

required to update the software using the network. (See pages 43 to 44.)

* It may take time to access and download the update

depending on the Internet connection and other factors.

[] Updating the Software with a USB Memory

Device

To check for the availability of a software update, visit http://www,sharpusa,com/products/supporV. Ifyou have any questions, please call 1-800-BE-SHARP (800-237-4277),

, Do not remove the USB memory device or unplug

the AC cord while the software is being updated.

* Be sure to properJy foJlow the whole procedure

described below, step by step. Otherwise, for

example, the TV cannot read the data in the USEI memory device and software updating will fail

1 Insert the USB memory device with the update

file into the USB 1 or USB 2 terminal on the R/.

* When you update the software, use only one USB

terminal. ERher USB 1 or USB 2 is usable.

* The current version of the TV software and the

version of the update file on the USB memory device are displayed.

Example

* If the USB memory device is not properly installed

or the correct update file cannot be found on the USB memory device, an error message is displayed. Check the file on the USB memory device, and then reinsert the USB memory device correctly.

Example

, Do not remove the USB memory device or unplug

the AC cord while the software is being updated.

6 When the software is successfully updaled, a

screen is displayed indicating that the update process is corrlpleted,

After this screen is displayed, the R/

automatically turns off and then turns on again,

Example

* If the update has failed, check the file in the USB

memory device and try Software Update again.

2 Press j,/Y on the Manual Update screen to

select "USB Update", and then press ENTER,

_- 28

Page 31

On=Screen Display Menu

[] Updating the Software via the Network 3 After the update file is downloaded, the software

1 Press A/Y on the Manual Update screen update process begins.

to select "Network Update", and then press ENTER.

, The TV connects to the network and checks for

updates.

, To cancel, press ENTER.

Enjoying 3D image Viewing

You carl use spedal 3D Glasses to watch 3D-supported images on this [V.

, You can enjoy 3D movies on this TV by viewing the movie throu'_h SHARP 3D Glasses supplied wkh the TV or

through optional 3D Glasses sold separately.

, To produce 3D images, liquid crystal shutters in the 3D Glasses alternately open and dose imperceptibly fast to

exactly match akernating left and right video images displayed by the TV.

, Net all consumers can experience and enjoy 3DTV. Some people suffer from stereo blindness which prevents

them from perceiving the intended depth of 3D entertainment. Also, some people who watch 3D programming may experience initial feelings of motion sickness as they adjust to the picture. Others may experience headaches, eye fatigue or motion sickness. Some viewers might also experience epileptic seizures. Like a relier coaster, the experience is not for everyone.

The current version of the TV and the latest version of sePlware are displayed. To update the IV software, select "Yes", and then press

ENTER,

, When a server connection cannot be established

or an update is not available, a message is displayed. If a server connection cannot be established, check the broadband connection and Intemet

Setup.

, Do not unplug the AC cord while the software is

being updated.

4 When the software issuccessfully updated, a

screen is displayed indicating that the update process is completed.

A screen indicating that the update is completed

is displayed. 4 seconds later, the IV restarts automatically.

, Ifthe software was not updated successfully,

check the broadband connection and Internet Setup, and then try updating the software again.

, The 3D Glasses are precision equipment. Handle them with care. , Improper use of the 3D Glasses or failure to follow these instructions can result in eye strain. , If you experience dizziness, nausea, or other discomfort while viewing 8D images, immediately

discontinue use of the 3D G_asses. Using the 3DTV with incompatible 3D broadcasts or software can

make images appear blurry or create overlapping images. , When viewing 3D images continuously, be sure to take a break periodically to prevent eye strain. , If you are nearsighted or farsighted or have astigmatism or a different _evel of eyesight between the

left and right eyes, you should take the necessary steps, such as wearing eyeglasses, to correct your

eyesight before viewing 3D images. The 3D G_asses can be worn over eyeglasses.

, When viewing 3D images, keep the 3D Glasses horizontally level with the TV screen. If you tilt the

3D Glasses with respect to the TV screen, the images viewed by the left and right eyes may appear

significantly different or images may appear overlapping. , View 3D images at the appropriate distance from the TV screen. The recommended distance is three

times the effective height of the TV screen.

Examples of recommended distances 70-inch screen: Approx. 8.5 ft (2.6 m)

Viewing should not be done closer than the recommended distance. , Be carefu_ of your surroundings when viewing 3D images. When you view 3D images, objects may

appear c_oser or farther than they are. This may cause you to misjudge the distance and possibly result

in injury if you accidentally hit the screen or surrounding objects. , The 3D Glasses are not recommended for people aged _ess than 6. , When children are viewing 3D images, be sure a parent or guardian is present. Monitor children viewing

3D images, and if they show signs of discomfort, immediately discontinue use of the 3D Glasses. , People with a known history of photosensitivity and people with heart problems or poor health should

not use the 3D Glasses. This can worsen existing hea_th conditions. , Do not use the 3D G_asses for other purposes (such as general eyeglasses, sunglasses, or protective

goggles). , Do not use the 3D function or 3D Glasses while walking or moving around. This may result in injuries due

to running into objects, tripping, and/or falling. , When using the 3D G_asses, take care not to accidentally strike the 13/screen or other people. Viewing

3D images may cause you to misjudge the distance to the TV screen and accidentally strike the screen,

resulting in possible injury.

, It is recommended that you do not view 3D images if you are s_eep deprived or if you have been drinking

a_cohol.

(_)- 29

Page 32

Enjoying 3D image Viewing

2D _ 3D * Converts normal 2D images into 3D images.

Creates 3D images from 3D images displayed side by side. 3D mode The image is splk into a left and right image, and then the (using the Side by Side images are stretched and displayed sequentially to create 3D Glasses) a 3D image.

Creates 3D images from 3D images displayed on the

top and bottom. The image is splk into a top and bottom

Top and Bottom image, and then the images are stretched and displayed

sequentially to create a 3D image.

Side by Side _ * Creates 2D images from 3D images displayed side by side. 2D mode 2D Only the left image is stretched and displayed. The image (without does not appear in 3D.

using the _ Creates 2D images from 3D images displayed on the 3D Glasses) Top and Bottom

top and bottom. Only the top image is stretched and

,2D

displayed. The image does net appear in 3D.

5 Take off the 3D Glasses and turn off the power.

The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when swkching from 3D to 2D mode.

The image signal may centain a 3D identification signal. You can enable the TV to automatically detect the 3D irr_age type by selecting "System Options" > "3D Setup" > "3D Aute Change" on the TV. (See page 31 ,) 1 When "3D Auto Change" is set to "Mode 1"

or "_ode 2"

* The 3D image type is detected automatically and

the appropriate 3D image is displayed.

if the input signal swkches to 2D, 2D images are displayed automatically. 3D mode is canceled automatically when the setting is changed, input selection is changed, or the power is turned off.

1 Press 3D,

A screen appears prompting you to select

between 3D and 2D image viewing.

2 Press -_1/1_to select "3D" or "2D", and then

press ENTER.

To view in 3D mode: Select "3D", and then go to step 3. To view in 2D mode: Select "2D", and then go to step 6.

3 Press _1/1_ to select the 3D signal type

("2D .3D", "Side by Side" or "Top and Bottom") and then press ENTER,

When "3D Auto Change" is set to "Off"

The following message is displayed. Press 3D.

Press _1/1_to select the "Yes", and then press

ENTER.

2 Turn on the 3D Glasses and place them on your

head,

:3 You can now view 3D images.

4 Press 3D during the 3D mode.

Select "Yes" and press ENTER to switch to 2D mode.

Take off the 3D Glasses and turn offthe power.

If you select the same system as that of the input signal, 3D images are displayed.

4 Turn on the 3D Glasses and place them on your

head.

5 You can now view 3D images.

6 Press _1/_- to select the 213skjnal type ( "Side

by Side" or "Top and Bottom") and then press

ENTER,

If you select the same system as that of the input signal, 2D images are displayed.

o Take off the 3D Glasses and turn off the power.

Take off the 3D Glasses and turn off the power.

_- 30

Page 33

Enjoying 3D image Viewing

You can convert nermal 2D images inte 3D images.

1 Press 3D,

2 Press 4/1_ to select "2D ,3D", and then press

ENTER.

3 Turn on the 3[) Glasses and place them on your

head.

, The TV returns to 2D mode after 1 hour has passed.

You can switch back to the previous mode by pressing 3D.

1 Press 3D,

, A confirmation screen is displayed.

2 Select "Yes" and then press ENTER.

, The TV returns to the previous mode.

Pressing 3D in 3D mode displays the 3D menu. Press the colored buttons to make the necessary settings.

B: 3D Surround (See page 22.)

The surround mode changes eachtime you press

B. O: 2D _3DConvert Effect D: 3D Setup

You can adjus! the 3D image to the desired image

quality and make various settings for 3D image

viewing.

® Set the 3D viewing settings with "System Options"

> "3D Setup".

, Which items can be selected/adjusted differs

depending on whether the TV is in 2D mode or in 3D

mode.

The audio and video settings can be changed to suit the program or input content being watched.

3D: For a highly defined image in a normal lighting. GAME(3D): Lowers image brightness for easier

viewing.

You can make various settings to enhance 3D image viewing.

This setting can be used to switch to 3D mode automatically when a 3D identification signal is

detected. Set the desired mode according to the type of media

you are viewing, such as video from a connected

device or video from an intemet applicalion.

Mode 1: 3D mode is selected automatically when a

3D signal is detected while viewing video from a

VOD service or HDMPconnected equipment.

Mode 2: 3D mode is selected automatically when,

in addition to detecting a 3D signal while viewing

video from a VOD service or HDMI-connected

equipment, a video pattern with "Side by Side" or "Top and Bottom" format is also detected.

Off: Auto change is not performed.

You can adjust the 3D effect when converting

images from 2D mode to 3D mode.

Select a desired lew_l of corwert effect from _-1 te

+16.

, This function is only available when converting 2D

images to 3D images.

, When you use this function, image conversion on the

TV will resuk in some differences in the original images and hew they appear.

, 2D images that have been converted to 3D images

may be viewed only for personal use.

This displays the elapsed time of 3D image viewing.

Yes: Displays the elapsed viewing time on the screen

every hour.

No: Does not display the elapsed viewing time.

, You can select AV MODE by pressing AV MODE on

the remote control unk.

, This function does not work when the input source is

Composite, Component, RGB or Analog/Digital tuner.

Select the method Ier adjusting the 3[.) depth.

Auto: The depth is adjusted automatically. Manual: You can manually adjust the depth using

the function "Depth Change".

, This function is only availablewhen the input signal is

3D.

, This function may not be displayed depending on the

type of 3D signal.

Adjusts the depth manually. "0" is the kwel where no

adjustment is made.

, This function is only available when "3D Depth Control"

is "Manual".

_)- 31

Page 34

Enjoying 3D image Viewing

, Appropriate 3D Glasses are required to view 3D images. Purchase 3D Glasses for use wkh Sharp brand 3D LCD

TVs.

[] 3D Gmasses lenses , Do not apply pressure to the lenses of the 3D Glasses. Also, do not drop or bend the 3D Glasses.

, Do not scratch the surface of the lenses of the 3D Glasses with a pointed instrument or other object. Doing so may

damage the 3D Glasses and reduce the qualky of the 3D image.

, Use only the cloth provided with the optional 3D Glasses to clean the lenses. [] Caution during viewing

, Do not use devices that emk strong electromagnetic waves (such as cellular phones or wireless transceivers) near

the 3D Glasses. Doing so may cause the 3D Glasses to malfunction.

, The 3D Glasses cannot operate fully at extreme high or low temperatures. Please use them wkhin the specified

usage temperature range.

, if the 3D Glasses are used in a room with fluorescent lighting (60 Hz), the light wkhin the room may appear to flicker.

in this case, either darken or turn off the fluorescent lights when using the 3D Glasses.

, Wear the 3D Glasses correctly. 3D images will not be correctly visible if the 3D Glasses are worn upside down or

back-to-front.

, Other displays (such as computer screens, digital clocks, and calculators) may appear dark and difficuk to view

while wearing the 3D Glasses. Do not wear the 3D Glasses when watching anything other than 3D images. , if you lie on your side while watching the TV wkh 3D Glasses, the picture may look dark or may not be visible. , Be sure to stay wkhin the viewing angle and optimum TV viewing distance when watching 3D images. Otherwise,

you may not be able to enjoy the full 3D effect. , The 3D Glasses may not work properly if there is any other 3D product or electronic devices turned on near the

glasses or TV. If this occurs, turn off the other 3D product or electronic devices or keep the devices as far away as possible from the 3D Glasses.

, Stop using the 3D Glasses in any of the following situations:

- When images consistently appear doubled while you are wearing the 3D Glasses

- When you have difficulty perceiving the 3D effect

, if the 3D Glasses are fauky or damaged, stop using them immediately. Continued use of the 3D Glasses may cause

eye fatigue, headaches and illness.

, if you have any abnormal skin reaction, stop using the 3D Glasses. In very rare instances, such reactions may be

due to an allergic reaction to the coating or materials used.

, if your nose or temples become red or you experience any pain or kchiness, stop using the 3D Glasses. Pressure

caused by long periods of use may lead to such reactions and may resuk in skin irritation.

[] Usage range of the 3D Glasses , The 3D Glasses can be used by receiving a signal sent from the TV.

The 3D Glasses turn off automatically after 15 seconds if no signal is recieved from the TV.

Operating range: From directly in front of the 3D emitter on the TV: approx. 17 ft (5 m) (within approx. 300 horizontally and 20 ° vertically)

, For further details, refer to the operation manual of your 3D Glasses.

Enjoying Photo/Music/Video Playback

n, You can connect the 'f_/to a USE-] memory device, USB hard drive, SD memory card or home network (DLNA)

server to enjoy viewing pictures, listening to music, and watching videos.

, Depending on the USB memory device/USB hard drive/SD memory card/home network (DLNA) server, the TV may

not be able to recognize the recorded data.

, It may take time to read the recorded data if the USB memory device/USB hard drive/SD memory card/home

network (DLNA) server contains many files or folders. , Use only alphanumeric characters for naming files. , File names over 80 characters (may vary depending on character set) may not be displayed.

Insert the USB memory device or SD memory card with recorded photos, music or videos into the USB I or USB 2 terminal or SD memory card slot on the R/. ® If USB memory devices are inserted into both terminals, the USB I terminal has priority,

®When connecting a USB hard drive, be sure to use a hard drive with an AC adapter, ® Do not remove a USB memory device or USB/SD memory card from the 'R/while transferring files, using

the slide show function, or switching screens, or before you exit "SD/SDHC/USB" from the INPUT list. ® Do not insert and remove a USB memory device/USB hard drive/SD memory card to and from the IV

repeatedly,

®When using a card reader, be sure to inserta USB memory device first,

, Do not use a USB extension cable when connecting a USB memory device to the USB terminal on the TV. , Using a USB extension cable with the USB memory device may prevent the TV from performing correctly.

_- 32

Page 35

Enjoying Photo/Music/Video Playback

Connect the lM to the home network (DLNA) server using an ETHERNET cable. ® You can also connect a Home Network (DLNA) server by using a wireless LAN.

°°@

ETHERNET cable

Home network (DLNA) server

Router

, Do not disconnect a home network (DLNA) server from the TV while transferring files, when a screen is switching to

another or before you exit "Home Network (DLNA)" from the iNPUT list.

, Do not connect and disconnect a home network (DLNA) server from the TV repeatedly.

® To play back data on a USB memory device or SD

memory card, insert the USB memory device or SD memory card orsthe 'f_/. USB or SD mode is selected automatically. (Go to step 2)

® Use the following procedure to switch back to USB

or SD mode after switching from USB or SD mode to another mode.

1 Select "SD/SDHC/USB" or"Home Network

(DLNA)" from INPUT list screen.

2 Press D, 3 Press ,&/V (or 41/_) to select the drivdserver

where you want to find your files, and then press ENTER.

. For USB or SD mode, select the drive. . When in DLNA mode, select the server.

4 Press _/1_ to select "Photo", "Music" or

"Video", and then press ENTER,

Example

, The Media screen can be displayed even by using the

application window. To display the application window,

press SmartCentral. (See page 15.)

, You cannot swkch the input mode if a USB memory

device or SD memory card is not connected.

• You do not need to select the drive/server in step 3 when there is only one drive in the connected USB

memory device or SD memory card or there is only

one home network (DLNA) server connected to the TV.

, 16 is the maximum number of USB or SD drives and

10 is the maximum number of home network (DLNA)

servers that can be displayed.

, if the TV is turned off and then on again, the number

assigned to the USB or SD drive may change.

, "VIEW MODE" is fixed during the Photo or Music

mode. During "Video mode", you can select "Auto" or "Original".

, The key guide display disappears automatically after a

particular time has elapsed. To display the key guide

display again, press DISPLAY.

5 Press 41/_ to select the desired folder, and then

press ENTER,

USB USB Memory, USB card reader (Mass device Storage class), USB hard drive

SD card SD/SDHO memory card File system FAT/FAT32/NTFS* (*USB hard drive only) Photo file JPEG (.jpg) (DOF2.0 compliant)

format Music file MP3 (.mp3)

format Bkrate: 32k, 40k, 48k, 56k, 64k, 80k,

96k, 112k, 128k, 160k, 192k, 224k, 256k, 320kbps Sampling frequency: 32k, 44.1k, 48kHz

DivX 3.11/4.x/5.1/6.0 MP3

XviD Dolby Digital

.avi AVI H.264 LPOM

MPEG4 ADPCM

Motion Jpeg DTS

DivX 3.11/4.x/5.1/6.0 MP3

XviD Dolby Digital

.mkv MKV LPOM

H.264 ADPOM

MPEG4 DTS

DivX 3.11/4.x/5.1/6.0 MP3

XviD Dolby

.asf ASF MPEG4 Digital

.wmv

VOw1 LPOM

Windows MediaVideo v9 WMA

MP3

H.264 Dolby Digital .mp4 MP4 MPEG4 Dolby .mov (SMP4) Motion Jpeg Digital Plus

AAO

Dolby Digital

MPEG2

.mpg PS MPEG

.mpeg MPEG1 LPOM

Photo fi_e format JPEG Music file format LPCM, MP3

Video fi_e format MPEG2-PS, MPEG2-TS,

WMV, ASF, MP4, MOV, AVI

, Progressive format jpeg flies are not supported. , Some video file formats may not be played depending

on the file or the server.

, WMV, ASF, MP4, MOV and AVI are nomDLNA

contents.

, Progressive format jpeg flies are not supported. , USB 1.1 devices may not be played properly. , Operation using USB hubs is not guaranteed. , Some video file formats may not be played depending

on the file.

, Some images may not be displayed in the appropriate

aspect ratio depending on the file format.

, Ifyou insert any card other than the SD/SDHO (class 6

or higher), it will not work.

q_)- 33

Page 36

Enjoying Photo/Music/Video Playback

, The screen images in this section are for the USB

mode. it may be slightly different in the SD mode or Home network (DLNA) mode.

Example

, When there are invalid photo files, the X mark will be

displayed for the file. (USB or SD mode only.)

, You can see the file name, shooting date, file size and

pixel size of the selected photo in the lewerqeft corner

of the screen (shooting date is only available in the

EXIF file format).

The photo selected on the thumbnail selection screen is displayed.

Buttons for individual display operation

_/1_ Go to the previous/next photo in the

same directory.

RETURN Return to the thumbnail selection

screen.

A (red) Rotate the photo by 90 degrees to the

left.

B (green} Rotate the photo by 90 degrees to the

right.

, Rotating photos only applies to the temporarily

selected item and this setting is not saved.

, The key guide display disappears automatically after a

particular time has elapsed. To display the key guide

display again, press DISPLAY.

Buttons for thumbnail operations

A./_'/4/_- Select a desired item.

ENTER When selecting a folder icon:

Enter this directory. When selecting a photo thumbnail: Enlarge the photo.

RETURN Return to the previous process.

A (red} USB or SD mode:

Select the images to be displayed. Press this button to add or remove a checkmark.

Home Network (DLNA) mode: Display the Media screen.

B (green}* Display the music list screen. You can

select the background music to be

played for the slide show. C (blue} Start the slide show. g (yellow} Display the USB MENU/SD MENU/

Home Network (DLNA) Menu screen.

* This function is available only for the USB or SD mode.

The photos displayed on the thumbnail selection screen are displayed as a slk_e show.

Buttons for slide show operation

RETURN Return to the thumbnail selection

screen.

D (yellow) Display the USB MENU/SD MENU/

Home Network (DLNA) Menu screen.

, The selected BGM is played repeatedly. , The slide show continues until you press RETURN. , For setting the slide show speed, select "Select Slide

Show interval" on the USB MENU/SD MENU/Home

Network (DLNA) Menu screen.

, The key guide display disappears automatically after a

particular time has elapsed. To display the key guide display again, press DISPLAY.

On the menu te be displayed in USB or SD mode, use ,_,/V to select an item and make settings te

your preferences.

Example

'_ _ _ ' _ ...... _;/_

[] Select S_ide Show _nterval Specify the length of time before the next image appears.

Press _/_ to select the desired length of the time,

and then press ENTER.

5sec/t Osec/3Osec/6Osec

, For DLNA mode, follow the same procedure. , Depending on the photo flies, the length of the slide

show interval may differ from the selected interval time. [] Select Slide Show BGM The music listscreen appears when you select

"Select Slide Show BGM".

You can select the music to be played inthe

background while the slide show is being displayed. 1 Select the music you want to play from the music list.

, For operations on the music list screen, see

"Music Mode".

2 Press RETURN to display the thumbnail

selection screen, and then press C to start the slide show and the background music.

, All of the music files are selected by default.

[] Set/Reset All Slide Show image Selecting "Set All Slide Show image" or "Reset All Slide Show image" will display the thumbnail selection screen. On the screen, set or reset the

images to be displayed in the slide show.

Set All Slide Show Image: Checkmarks are added

to all the images.

Reset All Slide Show Image: Removes all the

checkmarks from allthe images. [] Remove SD/USB Media Device To remove the USB device or SD memory card

properly, use _l/_ to select "Yes" and then press ENTER,

_- 34

Page 37

Enjoying Photo/Music/Video Playback

Example

Buttons for music mode

A/T/41/_ Select a desired item. ENTER When selecting a folder icon:

Enter this directory. When selecting a music file: Play music.

RETURN Return to the previous process.

A (red} USB or SD mode:

Select the music to be played back. Press this button to add or remove a checkmark.

Home Network (DLNA) mode:

Display the Media screen. B (green} Stop music. C (blue} Play/(Pause)* music. D Display the USB MENU or SD MENU

(yellow)* screen.

* This function is available only for the USB or SD mode.

When there are invalid music files, the X mark will be

displayed for the file. (USB or SD mode only.)

The displayed play time may differ slightly from the

actual play time depending on the files.

Ors the menu to be displayed in USB or SD mode, use A/V to select an item and make settings to

your preferences.

Example

* See page 34 for details on the Remove SD/USB Media

Device function.

Set/Reset All Auto Play

Selecting "Set All Auto Play" or "Reset All Auto Play"

will display the music list screen. On the screen, set or

reset the music to be played back in the slide show.

Set All Auto P_ay: Checkmarks are added to all the

music flies.

Reset All Auto Play: Removes all the checkmarks

from all the music files.

Example

Buttons for file selecting operations

,_/_/_1/_ Select a desired _tem. ENTER When selecting a folder icon:

Enter this directory. When selecting a video file: Hay the video.

RETURN Return to the previous process.

A (red) USB or SD mode:

Select/deselect kems (checkmarks are added to the selected items).

Home Network (DLNA) mode: Display the Media screen.

D Display the USB MENU or SD MENU (yellow}* screen.

* This function is available only for the USB or SD mode.

Go to the beginning of a file by pressing once or to the previous file by pressing twice.

Go to the next file.

I_ USB or SD mode:

The fast forward speed changes every time you press I_. After playing to the end, the TV goes to the next file and starts to play.

Home Network (DLNA) mode: Jump forward in a video. *2

_1 USB or SD mode:

The reverse speed changes every time you press _1. After going back to the beginning, the TV starts to play the same file.

Home Network (DLNA) mode: Jump back in a video. *2

ENTER USB or SD mode:

Pause the video. Home Network (DLNA) mode:

Play/Pause the video. *2

RETURN Go back to the file selection screen. 3D SwRches between 2D and 3D modes. A (red}*1 Jump to the scene where playback

was last stopped. B (green) Stop a video. C (blue) Display the USB/home network (DLNA)

operation panel.

D Display the USB MENU or SD MENU (yellow}*1 screen.

0-9"1 Jump to a point in the video during

playback of a file without chapters.

You can jump to a later point by

pressing a higher number.*3

"1 These functions are available only for the USB or SD

mode.

*2 Jump forward/back and play/pause may not be

available depending on the flies.

*3 During playback of a file without chapters, playback

points are set automatically. Playback points are set

at intervals of a one-tenth of playback time. Example for a file with a playback time of 100 minutes: Pressing t jumps 10 minutes forward, and pressing 2

jumps 20 minutes forward. Pressing 0 returns to the start

of the file being played back.

The key guide display disappears automatically after a

particular time has elapsed. To display the key guide

display again, press DISPLAY.

ii!i!_!_!i_i_B_i_ii_!_!_iiii!ii_i!ii_i¸I_i¸!_II_!_¸_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_ii_i!!ii!i_ii¸i_ii_ii_ii_i!i_ii_ii_ii_ii_ii_i_i_i_i_i_i_i_i_i_i_i_ii_ii_ii_iiiii_!_iii_ii_i!_i!_i!_iii_i_ii_iiiiiiiii!i!_!!_!_!_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_ii_;_

Ors the menu to be displayed in USB or SD mode,

use ,_,/V to select an item and make settings to

your preferences.

Menu for file selecting operations

Example

* See page 34 for details on the Remove SD/USB Media

Device function.

[] Set/Reset All Auto Play Selecting "Set All Auto Play" or "Reset All Auto Play"

will display the video list screen. On the screen, set or reset the video to be played back in the slide

show.

Set All Auto P_ay: Checkmarks are added to all the

video files.

Reset All Auto Play: Removes all the checkmarks

from all the video flies.

Menu for playing mode

Example

* See page 34 for details on the Remove SD/USB Media

Device function.

[] Title (Edition}/Chapter Selecting "Title (Edition)" or "Chapter" will display a list of titles/chapters contained in the video file, Select the title or chapter you want to play back,

®The selected title or chapter is played back, ®"0--9" is displayed for files witheut chapters.

Playback jumps to the playback point of the selected number.

If there is Edkion information, this screen is displayed when the title is selected.

If there is no title or edkion, you cannot select "Tkle (Edition)". "Chapter" cannot be selected when there is no

chapter. [] Show Video information The information of the current file is displayed.

_)- 35

Page 38

Enjoying Photo/Music/Video Playback

You can use the operation panel for video playback operations, You can call up this operation panel from "System Options" > "View Option",

Example

Buttons for using the USB operation panel

_j Hold down to go in reverse.

Starts playback. _ Hold down to fast forward. |_ Video wkhout chapters: Press once to

return to the previous playback point.*

Press twice to return to the previous

file.

Video wkh chapters: Press once to

return to the previous chapter. Press

twice to return to the previous file. | | Sets pauses and still pictures. Jl_,.| Video wkhout chapters: Press once to

advance to the next playback point.*

Press twice to display the next file.

Video wkh chapters: Press once to

advance to the next chapter. Press

twice to display the next file.

Audio Change the audio when mukiple

audio is available for the video you are

watching. [] Playback stops. CO Change the Closed Caption display. Title Displays the tRle (edition). Resume Jump to the scene where playback

jump was last stopped.

* During playback of a file without chapters, playback

points are set automatically. Playback points are set at

intervals of a one-tenth of playback time.

Example for a file with a playback time of 1O0 minutes: Playback points are set every 10 minutes. Pressing

Jl_ll_| one time after viewing the file for 15 minutes

jumps to the 20-minute playback point.

, Reverse/fast forward continues from one file to another

during continuous playback.

, Use "CO" on the operation panel to change the Closed

Caption display. You can also switch the Closed Caption display by using "System Options" > "View Option" > "Change CO" or by pressing CO on the

remote control unk.

, Use "Audio" on the operation panel to change the

audio. You can also switch the audio by using "System Options" > "View Option" > "Change Audio".

Buttons for using the Home Network (DLNA) operation panel

_- Starts playback. |_ Go to the beginning of a file by pressing

once or to the previous file by pressing twice.

| | Sets pauses and still pictures.

Go to the next file.

[] Playback stops.

Jump back in a video.

t_ Jump forward in a video.

This is the function to confirm your registration code.

You need to register the code at http://www,divx,

corn,

1 Press MENU to display the MENU screen. 2 Press 4/J_ to select "Initial Setup", and then

press ENTER.

3 Press _./V to select "DivX_;Setup", and then

press ENTER.

[] DivX ®VOD Registration You can Iind your registralion code on this menu, You need to register the lV al http://www.divx,com

befere playing the DivX content,

[] DivX ®VOD Deregistration You can Iind your deregistration code on this menu, You need to deregister the IV at http://www.divx,

corn to release the registration,

®This function is available only for the USB mode,

®This function may not work while an Intemet

application is being used,

With the remote playback function, you can use your

portable device to play back pictures, video, and rnusic on the home network server,

®This TV is a DLNA certified Digital Media Renderer,

(DMR)

®To use the remote playback function, your portable

device must be a DLNA Certified Digital Media Controller,

®A wireless access point is required to use a

portable device.

Make the settings for remote playback. 1 Press 4/1_ to select "Initial Setup", and then

press ENTER,

2 Press ,_/Y to select "lntemet Setup", and thers

press ENTER,

3 Press A/Y to select "Set Up Home Network",

and then press ENTER,

4 Press A/V to select the specific adjustment

item, and therspress ENTER to set each item,

[] Remote Control Play Settings mis setting allows the lV to perform remote playback,

Permitted/Not allowed

[] Timeout Setup This sets the time until the lV returns autemafically to IV mode after remote playback ends,

10 sec./60 sec./No

®This function rnay not work while an Internet

applicalion is being used,

® For information on the compalible formats, see

"Home Network (DLNA) Server Compatibility" ors page 33.

_- 36

Page 39

Other Viewing Options

m = = I_=l|o = == e e

You can operate the connected AV products (AV receiver, cable box, SAT tuner, DIV, VOR, BD, DVD, LD) using the presetting manufacturer function of your remote control unit.

POWER

[_ STS DVD.VC_AUDIO

c_ c_ r--n

m _,_ OREC

OPTION SLEEP AUDIO FREEZE

CZ3 r--n EZ3 r--1

@@@

@N@

Presetting manufacturer codes

1 Press an appropriate button (STB, DVD_VCR or

AUDIO) to operate the connected equipment.

2 Press an appropriate button (STB, DVD_VCR or

AUDIO) and DISPLAY ai the same time to enter the code registration mode.

3 Press 0---9to enter the manufacturer code.

. Presetmode is finished once the LED no longer

lights up.

4 After registering the code, the LED will stop

blinking then turn off after one second. (Ifyou perform an incorrect operation, the LED will blink quickly then turn off.)

Manufacturer codes

STB BRAND

ANVISION

CABLE STAR DISH NETWORK DIRECTV EAGLE G.INSTRUMENT GERROLD

JERROLD

MAGNAVOX

MOTOROLA 38 OKA SIGMA 07 PANASONIC 14, PHILIPS 04,

18, PIONEER 07 RANDTEK 04, RCA 14, S.ATLANTA 01,

VIEWSTAR 04,

18,

ZENITH 06,

REMOTE CONTROL

CODE NUMBER

04, 05

39, 40

02, 03, 10, 11,17, 20

02, 03, 10, 11,12, 20,

25-34

04, 05, 08, 12, 15, 16,

18, 19, 22, 23

21 05, 08, 13, 15, 16, 19, 22, 23

O5 36*,37* 09,24 05,08,13,15,16, 19,22,23 35

. Numbers marked w_h* are SAT codes, all others are

STB codes.

BD/DVD/LD BRAND

DENON

JVO

KENWOOD MAGNAVOX 26 MARANTZ 26 MITSUBISHI 28 PANASONIC 24, PHILIPS 26,

REMOTE CONTROL

CODE NUMBER 24 31

38 PIONEER PROSCAN RCA

SAMSUNG SHARP SONY TOSHIBA YAMAHA ZENITH

30,33,35 25

25,39 29,34 23,32,41,42 27,40 26 24 26

Depending on the brand, the codes of some BD

players may not be supported.

VCR BRAND

AUDIO DYNAMICS 09

BROCKSONIC 13 CANON 04 CRAIG 12 CURTIS MATHIS 04

DBX 09

EMERSON 10, GE 04

INSTANT REOLYA 04 JC PENNEY 04 JVC 09,

KENWOOD 09

MAGNAVOX 04,

MAGNIN 12

MEMOREX 04

MONTGOMERY WARD 02

NEC 09

PANASONIC 04,

PENTAX 05

PHILCO 04,

PHILIPS 04, QUASAR 04

REALISTI(} 01, SAMSUNG 11, SHARP 01, SONY 07, SYLVANIA 04, TATUNG 09 TEAC 09 TMK 10 YAMAHA 09

REMOTE CONTROL

CODE NUMBER

13,14

16,17,22

05,06

18, 19, 20, 21

O5 05,06

12 02,03 08,15 05,06

REMOTE CONTROL

AUDIO BRAND CODE NUMBER

SHARP 01 SHARP (SOUND BAR) 02

q_)- 37

Page 40

Other Viewing Options

Oe% e - e - -e e = = i

To operate the connected equipment, press STB, DVD_VCR or AUDIO to select your device. (STB (cable/saiellite set top box), BD, DVD, VCR or AUDIO.) The remote control unit button will function as follows. ® When you operaie VCR, DVD or BD, press INPUT

to select the terminal connected to your device.

® CABLE and SAT cannot be selected at the same

time.

1 rPowE i-3

lid

OPTION SLEEP AUDIO FREEZE -- 10

E_ E_ E_ E_

@@N

@N@

--11

POWER (SOURCE)

• Turns the connected equipment power on and off.

, Starts playback. (VOR, BD, DVD)

3 _1

, Rewinds the tape and allows picture search. (VCR)

• Hold down to go in reverse. (BD, DVD)

, Stops the tape transport. (VCR) , Playback stops when pressed. With some Blu-ray

disc/DVD players, pressing the button twice may open the disc tray. (BD, DVD)

, Pressing quickly once takes you to the start of the

chapter currently playing. Each time you press it, you move back to the start of the previous chapter. (BD, DVD)

6 0-9, ,_ (DOT}

, Press a button (or buttons) that corresponds to

the channel that you wish to watch.(STB)

7 I_"

• Rapidly advances the tape and allows picture search. _VCR)

° Hold down to fast forward. (BD, DVD)

8||

° Sets pauses and still pictures. (VCR, BD, DVD)

, Pressing quickly once takes you to the start of the

next chapter. Each time you press it, you move ahead to the start of the next chapter. (BD, DVD)

10 ®REC

, Starts recording. (VCR)

11 FLASHBACK

, Press to switch between the current channel

and the channel you were watching immediately before. Some manufacturers do not preset FLASHBACK. (STB)

12 CHA/V

, Press CHA or CH v to tune in to a higher or

lower channel. (STB)

, Press to select the channel of the TV tuner on the

VOR. (VOR)

13 MENU

, When this button is pressed, the BD/DVD menu

will display. (BD, DVD)

14 A/T/41/_, ENTER

" _,/Y/_I/I_ : Press the button to select kems on

the STB GUIDE screen or STB MENU screen. (STB) Press the button to select items on the BD/DVD menu screen. (BD, DVD)

, ENTER: Press to activate the selected function.

(STB, BD, DVD)

Using AQUOS LiNK

What's AQUOS LINK?

, Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LiNK you can interactively operate

compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD).

, By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or

AV amplifier using the remote control of the TV.

, AQUOS LiNK allows you to operate the HDMI-connected equipment wkh one remote control.

Example

*Us_c_tnt.HDMI-certifiedcable * _]_ARC

, ........................................

Back panel Back panel

horizontal inputs vertical inputs

F--1

AQUOS LINK-compatible

AQUOS BD player audio system

, For connecting the TV to AQUOS LINK-compatible equipment, use commercially available cables. , Point the remote control toward the TV, not to connected HDMI equipment. , Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMl-certified cable. , Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this system. , These operations affect the HDMI equipment selected as the current input source. Ifthe equipment does not

operate, turn on the equipment and select the appropriate input source using INPUT.

, The AQUOS LINK feature may not operate properly when an HDMI splitter or AV selector unk is used. These devices

may cause interruptions to the image and/or sound.

Connected AQUOS LINK-compatible devices can be operated without changing the settings of the remote control unit.

The OPTION button will function only when AQUOS LINK is used.

[] One Touch Play

While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.

[] One Touch Recording Press OREC while you are viewing a broadcast received with the AQUOS LINK_compatible recorder. The AQUOS LiNK automatically recognizes the connected HDMI device and starts recording.

[] Single remote control

The AQUOS LINK automatically recognizes the connected HDMI device and you can control the TV and the devices

as if using a universal remote control. [] Control the AQUOS LINK-compatible audio system

Set the volume of AQUOS LINK-compatible audio system.

, The above description is an example of the AQUOS LiNK function. , The steps in "AQUOS LINK Setup" on page 39 need to be completed beforehand. , Refer to this operation manual and the operation manual of the AQUOS LiNK device to be used with this TV.

_- 38

Page 41

Using AQUOS LiNK

Make the settings to use AQUOS LINK. Set the settings with "System Options" > "AQUOS LINK

Setup". For operating the on-screen display menu, see page 19.

Select AQUOS LINK Control to disable the AQUOS LINK function even when an AQUOS LINK- compatible HDMI device is connected to the /_/. This functien prevents the device from starting to operate unexpectedly.

If this is activated, the One Touch Play function is enabled. While the R/is in standby mode, it automatically turns on and plays back the image

from the HDMI source.

When multiple AQUOS HNK--compatible devices are connected, this function allows you to set the recorder for recording when you press ®REC on the

TM's remote control unit.

Press _,/Y te select the recorder for recording.

......_!_i_i{_;_i_i_i_!_!_i_i_i_JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ_!_i_ii_ii_ii_ii¸i_ii_ii_i{_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_!!!!iiii

This function allows you to listen to the R/audio via audio equipment without using an optical fiber cable,

which conventionally is required.

Requirements for using an ARC-compatible AV amplifier: , ARC-compatible AV amplifier connected to the ARC-

compatible HDMI IN terminal (HDMI IN 1).

(Refer to the operation manual of the ARC-compatible

equipment for details.)

Use of an ARC-compatible cable.

Auto: You can listen to the TV audio wkh ARC-

compatible audio equipment.

Off: This function does not work.

If the TV audio cannot be output from the AV amplifier even after making the necessary settings, connect the TV to the AV amplifier wkh an optical fiber cable and select "Off".

'_ _÷ • .....

AQUOS LINK allows you to operate the HDMI-

connected equipment with one remote control. Press I_ to start playing back a title.

, The last played program is played back. You can use

the following buttons during broadcast viewing.

POWER Turns the power of the HDMI connected

(SOURCE} devices on and off.

_ Hold down this button to go in reverse.

Starts playback.

_-_ Hold down this button to fast forward.

m Stops playback. | | Sets pauses and still pictures.

Pressing quickly once takes you to the start of the chapter currently playing. Each time you press it, you move back to the start of the previous chapter.

Pressing quickly once takes you to the start of the next chapter. Each time you press k, you move ahead to the start of the next chapter.

This function can be set for each input terminal. The remote control unit of the R/cars be used to

select the channel, display program information, and perform other operations of the connected AQUOS LINK-compatible equipment.

This function allows easy one-touch recording of the program being viewed ors the 'f_/to AQUOS LINK-

compatible equipment with a recording function by simply pressing _REC on the remote control.

Prepare the connected AQUOS LINK- compatible recorder for recording. Check the

following items. , Make sure that the antenna cable is connected.

, Check that there is sufficient available space on the

recording media (HDD, DVD, etc.).

, On the TV, use "AQUOS LINK Setup" and "Selecting

Recorder" to select the equipment for recording.

, By default, the recorder connected to HDMI IN 1 is

selected for recording.

1 Press @REC to start recording.

, When you are viewing a broadcast received with

the AQUOS LiNK-compatible recorder selected in "Selecting Recorder", recording to the AQUOS recorder of the broadcast being viewed starts.

, When you are viewing a broadcast received

wkh equipment other than the AQUOS LINK- compatible recorder selected in "Selecting Recorder" or other external input equipment, pressing @REC on the remote control does not start recording.

2 Use the Link Operalien Menu to stop recerding.

Press OPTION to display the Link Operation Menu screen.

Press _,/Y to select "Stop Recording", and then press ENTER.

The Link Operation Menu allows you to make adjustments during operation of AQUOS LINK- compatible equipment.

1 Press OPTION to display the Link Operation

Menu.

2 Press ,_/V to select the desired item, and then

press ENTER•

, Specific operations differ depending on the item

you select. Following are the basic operations for

each item.

You can manually turn ors/off the power of the connected AQUOS LINK-compalible equipment.

Each time you press ENTER, the connected

equipment switches orsor off.

. The buttons _,_/11_ do not function wkh the

following Blu-ray disc players currently available.

- BD-HP20U, BD-HP50U

q_)- 39

Page 42

Using AQUOS LiNK

You can use the device operation panel te control playback operations.

Press A/Y/-,41/I_ to select the desired operation.

, This function works only when AQUOS LINK-

compatible equipment with the Device Operation Panel function is connected.

_@_1_ _ ....

This function allows you to display the title list for the connected equipment and to play back the title you want to enjoy.

Before using this function. Power on the AQUOS LINK-cempatible equipment, and select the appropriate external input.

Select the title with J,/Y/41/_, and then press b,-to start playback.

. This function works onlywhen AQUOS LINK-

compatible equipment isconnected.

You can call up a setup menu from the connected AQUOS LINK-compatible equipment.

, Depending on the status of the equipment (recording

or in standby mode, etc), the setup menu will not be displayed.

, The setup menu will not be displayed with the player

BD-HP20U currently available.

You can switch the media (HDD or DVD) for playback or recording on the AQUOS LINK-compatible recorder. , The Media type toggles each time you press ENTER in

"Change Media of Device".

You can call up the AQUOS LINK-compatible

recorder's EPG and preset timer recordings using the R/'s remote control.

Select the program on the recorder's EPG. , You can use A/Y/4/I_, ENTER, RETURN, EXIT

and the colored buttons.

, This function works only when an AQUOS LINK-

compatible recorder is connected.

, Refer to the operation manual of the recorder for

details.

You can select te listen to the /_/sound only from

the AQUOS LINK-cempatible audio syslem.

By AQUOS audio SP: The sound from the TV

speaker is muted and only the sound from the

AQUOS LINK-compatible audio system is audible.

• You can use VOL+/- and MUTE.

By AQUOS SP: The sound is output from the TV

speaker.

You can manually change the AQUOS AUDIO

speaker system's sound mode. The seund mode changes each time yeu press ENTER. , Refer to the operation manual of the AQUOS LINK-

compatible audio system for details.

If multiple HDMI devices are connected in a daisy chain, you can specify which device to control here.

Press ,j./V to select the desired device from a list of connected HDMI devices, and then press ENTER.

_ _ _ _ _._ _ .....

You can also display the AQUOS LINK Setup screen

Irom the Link Operation Menu.

You can also use the Link Operation Menu for

recording on the connected AQUOS LINK- compatible equipment. , You can also start recording by pressing _REC on the

remote control unk.

This function enables you to connect the lM to a smartphone that supports Mobile High-Definition Link (MHL TM) using an MHL cable. l"o connect the lM to your MHL--compatible smartphone, be sure to use an MHL cable (commercially available). , You can view pictures and video on a large screen. , You can play back music files.

Mill_ cable

Back pane_ vertica_ inputs

, An MHL-compatible portable device is required to use this function. Connect the device to the HDMI IN 4 terminal. , This product incorporates MHL 1.

[] Auto Power On

When an MHL-compatible device is connected to the TV, the TV turns on automatically.

, This function operates when "AQUOS LiNK Control" is set to "On". (See page 39.) [] Auto Input Selection

When an MHL-compatible device is connected while the TV is on, the input mode is selected automatically.

, This function operates when "AQUOS LiNK Control" is set to "On". (See page 39.) [] Operation Using the Remote Control

The remote control of the TV can be used to operate a portable device.

, _/T/_/I_, ENTER, EXIT, o-g, • (DOT), ENT, etc. , The operations vary dependk_g on the connected equipment and content being viewed.

_- 40

Page 43

Using a PC

_e • = = .e =

You can adjust the position of the image input from a PC the settings with "System Options" > "Terminal Setting" > "PC input".

For automatically adjusting the PC image.

Yes: Auto Sync. starts and "Now adjusting the

image." displays.

No: This function does not work.

, When "Auto Sync." is successful, "Completed"

displays, if not, "Auto Sync." failed. , "Auto Sync." may fail even if "Completed" displays. , "Auto Sync." may fail if the computer image has low

resolution, has unclear (black) edges, or is moved while

executing "Auto Sync.". , Be sure to connect the PC to the TV and switch it on

before starting "Auto Sync.".

Ordinarily you can easily adjust the picture as necessary to change image position using "Auto Sync.". In some cases, however, manual adjustment is needed to optimize the image.

H-Pos,: Centers the image by moving it to the left or

right.

V-Pos,: Centers the image by moving it up or down.

CLock: Adjust when the image flickers wkh vertical

stripes.

Phase: Adjust when characters have low contrast or

when the image flickers.

, For resetting all "Fine Sync." adjustment items to the

factory preset values, press A/Y to select "Reset",

and then press ENTER. , it is not necessary to adjust the "Clock" or "Phase"

when a digital signal is being input, so k cannot be

selected. , The defauk cursor position may not be in the center,

because the screen poskion variable ranges may be

asymmetrical. , The screen position variable ranges depend on the

View Mode or the signal type. The ranges can be seen

on the position-setting screen.

This function sets the terminal to output the computer audio.

The adjustment items vary depending on the input

source. Select the input source corresponding to the terminal connected to the PC and then adjust the desired itern. To perform the operation, refer to "System Options" > "Terminal Setting" > "Audio Select".

m PC IN

Video: Select this when the TV and PC are

connected using an analog RGB cable and the audio is not input.

Video+Audio: Select this when the TV and PC are

connected using an analog RGB cable and the audio is input via a G 3.5 mm stereo minijack.

m HDIVll 2

HDMl(Digital): Select this when the TV and PC are

connected using an HDMI-certified cable and audio is input via the same cable.

HDMl+Analog: Select this when the TV and PC are

connected using a DVI-HDMI conversion cable and the audio is input via a G 3.5 mm stereo mini jack.

, When "Audio Select" isset to "HDMl(Digital)", sound

will not be produced if you use only an HDMI-certified cable to connect HDMI-compatible equipment. To

produce sound, you should make an analog audio

connection.

, Ifyou want to connect HDMPcompatible equipment

using only an HDMI-certified cable, set "Audio Select"

to "HDMl(Digital)".

o _ o I n

®The TV can be controlled from a PC, control panels

and other devices using the RS-232C or IP.

® Use a cross type RS-232C cable, ETHERNET

cable (commercially available) or wireless L/kN for the connections.

, This operation system should be used by a person

who is accustomed to using computers.

_te _

Set this function when operating the TV from equipment connected by LAN or wireless LAN. To perform the operation, refer to "Initial Setup" > "lnternet Setup".

[] AQUOS Remote Control

When "AQUOS Remote Control" is selected,

"Change" will be highlighted. Press ENTER, [] Detailed Settings

Make the detailed settings (Login ID, password, etc.). Follow the on-screen instructions to configure the settings.

Set the name of the TV displayed on other network devices.

, Use the software keyboard to set the name. See page

44 for details on the software keyboard.

Connect to the TV with the following settings made for IP on the PC.

TCP/IP Set the IP address on the %/mellu None (Do not select Telnet or

SSH) Set a port number on the %/

menu (Control port)

When you set your ID and password on the TV menu, you

need to enter them as soon as you connect to the TV.

, When you use this function, make settings for "AQUOS

Remote Control".

, The connection will be cut off when there has been no

communication for 3 minutes.

Set the RS-232C communication settings on the PC to match the R/'s communication conditions.

The TV's communication settings are as follows:

9,600 bps 8 bits

None 1 bit

None

[] Communication procedure Send the control commands from the PCvia the RS- 232C or IP.

The IV operales according to the received command and sends a response message to the PC.

Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command.

[] Command format

EightASCIIcodes + OR

Command 4-digits Parameter4-digits Returncode

Command 4-digits: Command. The text of four characters.

Parameter 4-digits: Parameter 0-9, x, blank, ?

[] Parameter

Input the parameter values, aligning left, and fill with

blank(s) for the remainder. (Be sure that 4 values are

input for the parameter.) When the input parameter is not within an adjustable

range, "ERR" returns. (Refer to "Response code formal" .) Any numerical value can replace the "x" on the table.

When "?" is input for some commands, the present

setting value

responds. _

[] Response code format

Normalresponse

Return code (0DH)

Problem response (communication error or incorrect command)

Return code (0DH)

(_)- 41

Page 44

Using a PC

[] Command table CONTROL CONTENTS

Commands not indicated here are not guaranteed to operate.

CONTROL ITEM COMMAND PARAMETER

POWER ONCOMMAND R i S i P iW 0 i i i Off

gLTrH_G i i i li i i OnIRsgggc]

! ! ! 2! ! ! OnI_P]

POWER SEWING PIOIW_R 01 1 j Power Off

i i i 11 i I PowerOn

,=putTOGGLEI,T,G,Dx,,,*ggIej

SELECTION i i i iii

TV I ITIVlD Ol I I

i I i I i I i

1 8 I ',A',V',D *', I ', I:HDMIIN1.2:HDMIIN2. g:HDMIINS,

_ _ _ _ _ _ 4: HDMI IN 4, 5: COMPONENT IN, 6: VIDEO IN 1,

i i i i i i 7:WDEO_Ng,8:PC_N

&V MODE SELECTION A _V _ M _ D * _ * _ * _ O: (Toggle), 1 : STANDARD. 2: MOVIE, 3: GAME,

_ _ _ _ _ 4: USER. 5: DYNAMIC (Fixed), 6: DYNAMIC,

I I I I _ I 7: PC, 14: 3D, 16: GAME (3D), 17: MOVIE THX VOLUME V _]O _]L I] M * _I * i * _I Volume (0 100) POSITION H POSITION H ', P ', O ', S * ', * _ * ',

v osiT,O=,Vlplols,,,"i'i'i

CLOCK C]L_C]K *]*I*] Only PC mode. (0 180)

PNASE!PiNiSiE"i'ii O,,,yPCmode 040

VIEWMODE W_ I _D_E *_ * _ _ O: (Toggle) [AV], l : Side Bar [AV], 2: S.Stretch [AV],

_ _ _ _ _ 3: Zoom [AV], 4: Stretch [AV, USB Video, _ _ _ _ _ SD Video, DLNA Video orlntemet applications],

I I I I _ I 5: Normal[PC], 6:Zoom [PC], 7: Stretch [PC],

_ _ _ _ _ 8: Dot by Dot [PC] [AV], 9: Full Screen [AV],

_ _ _ _ _ 10:Auto [USB Video, SD Video, DLNA Video or ', ', ', ', _ ', Internet applications], ', ', ', ', _ ', 11: Original [USB Video, SD Video, DLNA Video i i i i i i or Intemet applications] I I I I I I

MUTE M ! U ! T ! E * ! ! ! O: (Toggle), 1:On, 2: Off 9URROUND A i C i S i U * i i i O: (Toggle), 1: Normal, 2: Off, 4: 3D Hall, 5: 3D

_ _ _ _ _ Movie, 6: 3D Standard, 7: 3D Stadium

_UO,OSELECT,ONAICINIAxil I (Togg,ej

9LEEPTIMER O_F_T_M *_ _ _ 0:Off. I:OFFTIMER 80MIN.2:OFFTIMER 60MIN

iii i ii 3;OFFTIMER 90MIN,,4;OFFTIMER 120MIN,

SHANNEL DIRECT DICICIH * I * I * I ThechannelnumberofTV

CHANNEL, I I I I I I (1 135) (ANALOG) I _ I _ _

DIRECT _ * i* i* i* (01009999) CHANNEL i i i i i i (DIGITAL) D JC J 2 J U * J * I * (1 999)

iii

DICI21L * * (0999)

I I I II i*II

I I I I I I I I I I I I

SHANNEL DIRECT D ! C ! 1 ! 0 * ! * ] * ! * (0 gg99)

CHANNEL ', ', ', ', l ', (DIGITAL) D _C _ 1 * * (0 6383)

GRUp Thechan,,eInu, ,bero +l

' I I I I I I

OH CiRiDiW xii i Theohanne_numbero_%/1

DOWN I I I I I I

30 CiLiOiP xi i i (Toggle)

O V,CENAMET,V,N,M,' ' 1ii i

gO AREVERS'ONS'W'V'Nlii i

IP PROTOCOL I i p i P i V 1 i i i VERSION I I I I I I

CONTROL CONTENTS

The Power On command rejected. The Power On command accepted. The Power On command accepted. It shifts to standby. Power On

It input switches by the toggle. (It is the same as an input change key)

It input switches to TV. (A channel remains as it is. (Last memo/y))

Alhough it can choose now, it is toggle operation in inside.

The screen position variable ranges depend on the View Mode or the signal type. The ranges carl be seen on the position setting screen.

0: Although it can choose now, it is toggle

operation ininside. 1: Only available when 4:3 signal is being input. 5, 6: Only available when 4:3 signal is being

input. 8: [PC] Available except when UXGA is being input.

[AV] Only available when 10SOVp is being input 9: Only available when 720p is being input. 10, 11: Available when USB Video, SD Video,

DLNA Video or Interact application is used.

An input change is included if it is not TV display. In Air, 2 690h is effective. In Cable, 1 1350h is effective.

DIGITAL Air (Two Part numbers, 2 digit plus 2 digit)

DIGITAL Cable {Two Part numbers. 3 digit plus 3 digit) Front half of DIGITAL CABLE CHANNEL NO.

(Designate major channel) DIGITAL Cable (Two Part numbers, 3 digit pkls

3 digit) Rear half d DIGITAL CABLE CHANNEL NO. (Designate minor channel)

DIGITAL Cable (One Part numbers, 5 digit, less than 10,000)

DIGITAL Cable (One Part numbers, 5 digit, more than 10,000)

If it is not %/display, it will input switch to %/.

_ame function as CHA)

If it is not %/display, it will input switch to %/.

_ame function as CHV) Toggle operation of a closed caption. The device name set in "%/Name Setting" is

displayed. The model name of the %/ The current version of the %/sottware is

displayed. The currently supported version of IP protocol is

displayed.

CONTROLITEM

REMOTECONTROL BUTTONS

COMMAND PARAMETER

TiOiG H'iii,,,

R!G!K!Y "!'! !

III III III III III III III III

iiJ iii

III III III III III III III III III III

g g: 0 9.10: DOT, 11: ENT, 12: POWER, 13: DISPLAY, 14: POWER (SOURCE) 15: _, 16: _-, 17: _, 18: ||, 19:_ , 20: _, 21:_ P2: _REC, 23: OPTION, 24: SLEEP. 27: CO, P8: AV MODE, 29: VIEW MODE, 30: FLASHBACK.

_tMUTE,v_g:VOL_*VOL÷,_4:CR^,

OH ,36: INPUT, 38: MENU, 39: SmartOentral.

401 ENTER. 41 :_., 42:_', 43: _, 44:_% 45: RETURN. 46: EXIT, 47: FAVORITE OH, 49: AUDIO, 50: A (led), 51 : B (g/een), 52: C (blue), 58: D/yellow), 54: FREE7E. 55: FAV APP 1, 56: FAVAPP 2, 57: FAV APP 3, 58: 3D,

159: NETFLIX

If an underbar (_) appears in the parameter column, enter a space. if an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.

Any numerical value can replace the "x" on the table.

It is necessary to set the PC correctly to display XGA and WXGA sic hal,

Resolution Vertical Frequency VESA Standard

720 x 400

VGA

SVGA

XGA

640 x 480

800 x 600

1024 x 768

WXGA 1360 x 768

SXGA 1280 x 1024

SXGA+ 1400 x 1050

UXGA 1600 x 1200

1080p 1920 x 1080

2160p

3840 x 2160

Horizontal Frequency

31.5 kHz

37.9 kHz

37.5 kHz

35.1 kHz

37.9 kHz

48.1 kHz

46.9 kHz

48.4 kHz

56.5 kHz

60.0 kHz

47.7 kHz

64.0 kHz

65.3 kHz

75.0 kHz

67.5 kHz

53.95 kHz

56.25 kHz

67.5 kHz

70 Hz 60 Hz 72 Hz 75 Hz

56 Hz 60 Hz 72 Hz 75 Hz 60 Hz 70 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 24 Hz 25 Hz 30 Hz

o o o

o o o o o o o o o o o

VGA and XGA are registered trademarks of International Business Machines Corp.

_- 42

Page 45

Using the Intemet

By connecting your 'f_/to a broadband system, you cars access the Internet from the R/ .... •

® You can enjoy a variety of streaming content and Internet applications. (See page 46.)

, You may not be able to view 3D images when accessing the Internet.

='iili=,

® To connect your TM to the Internet, you must have a broadband Internet connection. ® If you de not have a broadband Intemet connection, consult the store where you pumhased your 'iM or ask

your Intemet service provider or telephone company.

®When an Internet conrsection is made, an E-!lhernetand wireless connection cannot be used at the same

time. Use only one of the connection types.

[] Using an ETHERNET cable Use an ETT--IEF_NFiTcable (commercially available) to conrsect the ETHERNETr terminal ors the TM to your broadband router (commercially available).

Modem Intemet

r---m

[] Using the wireless LAN This R/is equipped with a wireless I..AN function. For a wireless LAN conrsectk)n, you must use "Wireless Setup" to connect the access point and lM.

Modem Intemet

, This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio

communications that do not comply wkh regulations on radio communications. Therefore, do not use a separate

wireless LAN adapter.

, A wireless LAN connection and performance cannot be guaranteed for all residential environments. In the following

cases, the wireless LAN signal may be poor or drop, or the connection speed may become slower.

When used in buildings made wkh concrete, reinforced steel, or metal When placed near objects that obstruct the signal

When used with other wireless devices that emk the same frequency When used in the vicinity of microwave ovens and other devices that emit a magnetic field, electrostatic charge, or electromagnetic interference

, When there is significant interference in the 2.4-GHz frequency (such as from other wireless LAN devices, Bluetooth ®

devices, 2.4-GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN router/access point that supports IEEE802.11 a/n (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see the operation manual of your access point.

Perform the procedure below to make adjustments or to confirm the settings for accessing the Intemet. 1 Press MENU to display the MENU screen, and

then press ENTER.

2 Press 4/_ to select "initial Setup", and then

press ENTER,

3 Press ,L/V to select "lnternet Setup", and then

press ENTER,

4 Press ,_/Y to select "Network Setup" or

"Interactive Service", and then press ENTER.

. Select "Network Setup" when you make general

adjustments to connect to the Internet.

. If you want to make settings to restrict access to

the Intemet, then select "interactive Service".

5 Press ,L/V to select a specific item, and then

press ENTER,

6 Press ,L/y (or _/_-) to select the desired

setting, and then press ENTER.

7 Press MENU to exit.

You cars connect your TM te the Internet using the

setting item "Network Setup".

Adjustments for network corsnection will be made

automatically. Select "Wired" or "Wireless" and fellow the instructions displayed on the screen. , Automatic adjustments for wireless LAN connection

can be made only for the WPS method.

If your access point uses any other method, perform "Manual Setup".

Select the desired connection method and follow the

instructions shown on the display.

[] Wiremess Setup

Make adjustments and confirm the settings necessary for wireless LAN connection (such as

seamh For the access point and registration of it).

WPS push button: Allows the TV to automatically

establish the connection using a button on the access point.

WPS PIN code: Sets up the connection by

registering a PiN code for the access point.

Selecting wireless network: Searches for and

selects the access point to be connected.

Registering wireless network: Allows you to make

the connection by entering an SSID for the access point.

If your access point supports Wi-Fi Protected Setup (WPS push button method), it is recommended that you use this function for the wireless connection. You can press the WPS button on the access point to configure the settings automatically.

, The name of the WPS button function may differ

depending on the access point. See the operation manual of the access point for details.

1 Confirm the current settings in "Connection

Type".

, if "Wired" is selected, press 4/!_ to select

"Wireless".

2 Press j/y to select "Wireless Setup", and then

press ENTER,

, Confirm the settings. If each setting kern is correct,

press MENU to exk.

, if you are configuring the wireless setup for the

first time or changing the settings, go to step 3.

3 Press 4/1_ to select "Change", and then press

ENTER.

4 Select the desired connection method and follow

the instructions shown ors the display.

5 When a connection is established, the

connection details are displayed. Press ENTER.

_ii!i!_!:_;_i_i_{i!_!_i_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_i!_ii_!iill{{{i_{{i_{{{{i_{{i_{{{{i_{{i_{_{iiiiiiiiiiiiii{{{{iiii_iiii_ii!!ii_ii{iiiiii!!!!iiii{iiiiiiiiiiiiiiiiiiiiiiiiiiii!_!i!_ii_i!_iiiiiiiiiiiiiiiiiiiiiiiiiii_

You carsmake adjustments manually for network

connectiors.

[] Connection Type Select the connection type.

Wired: The signal is detected and setup is

performed automatically. Use "lP Setup" to check and change the settings as necessary.

Wireless: Configure the access point settings on

"Wireless Setup".

, Operations cannot be guaranteed when used with

access points that do not have Wi-Fi ® certification.

, A wireless LAN router/access point is required to

connect the TV to the Intemet using a wireless LAN. See the operation manual of your access point for setup.

, if your access point is set to a stealth mode (that

prevents detection by other devices), you may not be able to establish a connection, in this case, disable the stealth mode on the access point.

, A stable connection speed is required to play back

streaming content. Use an Ethemet connection if the wireless LAN speed is unstable.

, Before transferring to a third party or disposal, be sure

to initialize the wireless LAN settings.

, Please follow the legislation in your country when using

the wireless LAN outdoors.

q_)- 43

Page 46

Using the Intemet

[] IP Setup You can make adjustments manually for the IP. , Check that numbers are displayed for each setting. , if there are any settings wkhout numbers, specify the

numbers by following the on-screen instructions.

, input the IP address by using remote control buttons

0-9.

Example

i;iiii!ii{_!_!_!_!i_!_!i_!_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_!!!_!i_i_i_i_i_i_i_i_i_i_i_i_{_iiiiiiii{iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!!!ii!ii!ii!i_!i_ii_!_i_!_{i{_!i_iii!ii!ii!ii!i_!i{i{i{i{i{i{i{i{i{i{i_!i_ii_!i_ii¸!_i!_ii!i

After the cennecting and setting procedures have been completed, you carl check that the preparation

is correct. Press "Yes" to start the "Connection

Test",

, When the test resuRs are displayed, follow the

instructions shown on the screen.

If you do not want other people to connect to the Internet inyour absence, you can make settings to keep the lV away from the Internet. . input the 4-digit secret number by using remote control

buttons 0-9.

, if you have failed to connect to the Intemet, then an

error message will appear, in this case, press EXIT to exit from the connected TV feature to make changes to the network settings.

, if you still cannot connect to the Internet, please

consult your Internet service provider or telephone company.

, When an application is used, you cannot make settings

for "lnternet Setup".

if you need to make the settings of "lntemet Setup", press EXIT to exit from the connected TV feature.

[] if you cannot connect to the Intemet If the R/fails to connect to the Internet, then select

"Network Setup" and; , When the TV is in a wired LAN connection, make sure

the values for "lP Setup" are all correctly set.

, in the case of a wireless LAN connection, check the

settings of "Wireless Setup".

When you are editing an input screen or specifying the Network settings used for accessing the Internet, enter

text from the software keyboard.

, You can enter up to 128 characters for text. , Some special characters or diacritics may not be available depending on where you enter the text.

The text you enter is displayed as you type it in. To move the cursor (the current input position), use "_,;_,_.."or "i,,;,_,," on the software keyboard.

While you are entering text, likely input conversion candidates are displayed based on what you typed in.

Caps Off/Caps Lock If "alphabet" is selected, this switches characters between uppercase and lowercase. Each time you press ENTER, the character type switches as shown below: Caps Off: all the characters are lewercased Caps Lock: all the characters are uppercased

Shift Capitalizes the first character entered.

alphabet/Sign Press ENTER to select the type of characters entered: alphabet, or sign.

Back space/Delete Erases text one character at a time.

Enter

Applies the entered information and closes the software keyboard.

Space

Enters a space.

C_ear

Erases the character string.

, When the cursor is somewhere in a line: the character

string to the right of the cursor will be erased.

, When the cursor is at the right end of a line: the entire

line will be erased.

Quit

Closes the software keyboard witheut applying the entered in%rmatien.

_- 44

• ,/_/_/1_ Moves the focus. When moved at the far edge, the focus moves to the opposite edge. ENTER Performs the processing for the button currently in the focus. EXIT Closes the software keyboard wkhout applying the original input elements for the entered

text.

RETURN When the cursor isat the end of a sentence, this acts as a back space.

0-9 Directly enters the single-byte number for that button.

When A, B or C is pressed on the remote control while the characters to be entered in

A, B, C the likely input conversion candidate are displayed in A, B or C on the keyboard, that

character string is entered into the display field.

D Enters a space

Page 47

Using the Intemet

• _ t, 0 _ _ I Pageswithsecudtyprotectiorl, "l_'l"wi]lbedisp]ayed.

1 Press SmartCentral to display the application

window,

, Press SmartCentral again to display a list of

applications by category.

2 Press 4/_(or ,_/V) to select the Web Browser

icon, and then press ENTER,

, Ifyou changed the display to the list of applications

in step 1, select a category and then select the

Web Browser icon.

[] Buttons for Using the Browser VIEW MODE

, Each time you press VIEW MODE when a

browser screen is shown, the display pattern toggles between a webske-enly screen and a

TV+Web screen.

FAV APP1, 2, 3 (_J+Web)

, You can change the screen display method when

a Web browser application is assigned to the FAV APP buttons. Each time a FAV APP button assigned to a browser application is pressed while a browser is open, the screen swkches between Web-ske only screen and TV+Web screen.

ENTER, A/_'/41/1_

, Press _,/T/41/_ to select a link that you want to

jump, and then press ENTER.

EXIT

, Press the button to return to the TV screen.

RETURN

. Press the button to return to the previous page.

* Display the toolbar.

, You cannot play audio or movies in the browser screen

while a TV+Web screen is displayed.

, When displaying TV+Web wkh a channel in which

the V-Chip is enabled, the cursor keys on the remote

control unit do not function.

, Restrictions apply to window display.

Tool bar

Allows you to go back to the

previous page.

l Allows you to go to the next page.

Refreshes the page. Interrupts a page while it is loading.

Switches between virtual mouse and spatial navigation modes. Swkching modes also switches the display. Depending on the page displayed, swkching this function may make it

easier to use the browser. Opens a search window below the

toelbar. You can use this to search

for a word w_hin the displayed page.

Displays the home page. You can set the page displayed as your home page when the browser starts up. (See page 46.)

Displays the bookmarks list.

Displays your browsing history.

Configures browser settings such as your home page and browsing securky. (See page 46.)

Zooms the display in or out.

Restrictions apply to window display.

[] About links ®Web pages orsthe Internet often include "links" that

allow you to jump to other web pages (or sites).

® "Links" carl take various forms, including words

or images, but they always work in the same way

letting you jump to the link destination when you

select them.

®Selected items (such as links of text input fields)

are enclosed in a frame.

®You can jump from a "link" to the correspondirsg

link destination.

DISCLAIMERS SHARP corporalion bears no responsibility regarding the content and quality of the content provided by the content serve provider.

, Ifthe power is cut due to a power failure or the TV

being unplugged while you are using the Intemet,

information such as bookmarks or cookies may not be

saved correctly.

When a security notification window is displayed:

, Press ENTER to close the window. , This window appears when you visit a web page that

has security protection, or when you move from a protected page to an unprotected page.

, In "Security" you can set whether or not this window is

displayed. (See page 46.)

l"o users who access the Internet from a PC ®When you access the Intemet from this FV, the

procedures may net be the same as regular browser-based access on a PC.

®Ors some pages, video and audio, text or

images may net be displayed correctly.

You can use the toolbar to control the browser and to specify settings.

1 Press D to control the tee]bar. 2 Press _1/_ to select a function, and then press

ENTER.

You carl display the web content you want to enjoy.

1 Press D to display the toolbar. 2 Press _1/_ to move to the address area in the

toolbar, and then press ENTER.

. TheEnterAddress menu is displayed.

3 Enter an address, and then press ENTER.

. The web content you want to view is displayed.

powered

htt p://www.espial.com

q_)- 45

Page 48

Using the Intemet

You can check or modify your browser settings from the Browser menu.

1 Press D to display the toolbar.

2 Press 4/1_ to select "_" in the toolbar, and

then press ENTER,

3 Press A/Y to select and confirm the item you

want to set.

4 Press _./Y/-_I/I_ to specify the required setting,

and then press ENTER.

5 Press D to exit.

You can use a keyboard or mouse for operating the

fM while using the browser. ®When you use the USB devices, connect the

device to the USB terminal on the [V.

®When you use the bluetooth device, make

necessary settings with "Bluetooth Setup". (See page 26.)

, The keyboard and mouse can only be used on a

browser screen. The keyboard or mouse may not operate properly depending on the application being used.

, The software keyboard cannot be used by the

keyboard and mouse connected via Bluetooth even on the browser screen.

, The bluetooth device may not operate properly

depending on the device being used.

Home Page: You can set the page displayed as

your home page when the browser starts up.

Encoding: You can select the desired encoding

from the list below: Western (ISO-8859-1)/Unicode (UTF-8)

Page mnformation: Displays information about the

currently displayed page.

Security:

Secure sites:

When set to "Disabled", HTTPS skes cannot be accessed.

Security warnings:

When set to "Enabled", displays warning dialogs when going HTTP <, HTTPS.

Certificates: Display the list of certificates. You can

choose to enable/disable a certificate.

, Disable certificate are shown unticked in the

certificate list screen.

Cookies:

Accept all: Select this option to accept all cookies.

Reject all: Select this option when you do not want

to accept cookies.

Delete All Cookies: Deletes all your cookies.

By connecting the TV to the Internet, you can enjoy a variety of broadband content, including videos, music and photos.

Please check that the most current software is loaded on TV by selecting "Auto Update Setting"

on "Software Update" (see page 27) or by visiting I http://www.sharpusa.com/products/support/ [to check for a download of the newest software version.

Use the application window to access your favorite Internet applicalions. Press Sma_Central to display the application window. Follow the on-screen instructions for each

application. . When using this TV to access an Internet application

for the first time, the Disclaimer appears on the screen.

Press A/Y to select "Agree", and then press ENTER.

(You must select "Agree" to use the application.)

. Check the web ske of the provider for details on setup

and use ofthe functions.

[] Move the Icons You can move the icons of the more commonly used

applications ck)ser to the left•

Press 4/1_ to move the icon to the desired location.

[] Delete an Application Select "Delete App" to delete the icon.

[] Saving Favorite Applications You can set your favorite applications to the FAV

APP1, 2, and 3 buttons on the remote control for easier startup. The applications whose icons are moved onto _,

_ and {3_during Dock Display will be assigned to

the FAV APP 1, 2 and 3 buttons respectiw_ly.

. The SmartCentral icon cannot be moved or deleted.

During Dock display, press SmartCentral again to

display a list of applications by category.

. If"@_:_" or "a_" is displayed after you connect to

the Internet, check your TV's network settings and connection.

. Addkional applications will be available in the future. . These applications are provided by content providers.

The available applications vary depending on your country or region.

. The delivery speed of applications varies depending on

the network speed. Check the web ske of the provider for details on application setup and other information.

You carsmove the application icons and delete any

unused icons.

Example

1 Select an application, and then press J,. 2 Press A/T to select "Move App" or "Delete

App", and then press ENTER.

Press _l/l_ to select a category, and then press ENTER or _'.

2 Press A/V/_/I_ to select an application, and

then press ENTER. (]_Displays a list of applications for the selected

category that can be displayed on the TV. Press ENTER to add or delete applications to or

from the application window and favorites. (2_Displays the image now playing. (_ Provides a description of the selected application. @Displayed when there are multiple pages. Press

_l/_- to change pages.

@Guide display of required operation buttons.

_ _ _ ..... ,_....

You can deactivale the Netfiix function• Refer to

"Information" > "Netflix Help" and select "Deactivate". . To confirm the Netfiix status, check the information

displayed on the screen and click "OK".

To deactivate the VUDU function, refer to

"information" > "VUDU Help" and select "Yes".

_- 46

Page 49

Using the Intemet

When you access the Internet application for the first time, the following appears. ® This message is available only in English.

DISCLAIMERS ® This SHARP device facilitales the access to content and services provided by third parties. The content

and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. SHARP shall not be liable to you or any third party for your failure to abide by such authorization or terms of use. Unless otherwise specifically authorized by the applicable content or service provider, all third party content and services provided are for personal and non-commercial use; you may not modify, copy, distribute, transmit, display, perform, reproduce, upload, publish, license, create derivalive works from, transfer orsell in any manner or medium any content or services available via this device.

® SHARP isnot responsible, nor liable, Ior customer service-related issues related to the third party

content or services. Any questions, comments or service-related inquiries relating to the third party content or service should be made directly to the applicable content or service provider. You may not be able to access content or services from the device for a variety of reasons which may be unrelated to the device itself, including, but not limited to, power failure, other Intemet connectiorl, or failure to configure your device properly. SHARP, its directors, officers, employees, agents, contractors and affiliates shall not be liable to you or any third party with respect to such failures or maintenance outages, regardless of cause or whether or not it could have been avoided.

® ALL THIRD PARIY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU

ON AN "AS-IS" AND "AS AVAILABLE" BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY OR REPRESENIATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT UMFBa,TION, ANY WARRANTIES OF MERCHANBa, BILFfY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTIES OF SUFfABILFTY, AVAILABILITY, ACCURACY, COMPLETENESS, SECURIIY, TITLE, USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNINTERRUPIED OPERATION OR USE OF THE CONTENT OR SERVICES PROVIDED [0 YOU OR THAT THE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR E!XPECIATIONS.

® SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS

OF THIRD PARIY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE RELATED 'fO SUCH THIRD PARl_ PROVIDERS.

® IN NO F!VENT WILL SHARP AND/OR ITS AFFILIAIES BE LIABLE 'fO YOU OR ANY THIRD PARl_

FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENIAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, WHETHER THE THEORY OF LIABILI1-Y IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF WARRANTY, STRICT LIABILFfY OR OTHERWISE AND WHETHER OR NOT SHARP AND/ OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILFfY OF SUCH DAMAGES.

Appendix

® Before detaching (or attaching) the stand, make sure to turn off the fM and unplug the AC cord.

, Do not remove the stand from the TV unJess using an optional wail mount bracket to mount it,

(1_ Loosen the screw(s) used to secure the stand

cover.

(2_ Remow_ the cover.

I I I

3 Detach the stand from the/_/.

2 Unfasten the Iour screws used to secure the

stand in place.

, Be sure to always carry the TV by two people holding R

with two hands.

Examples of Application Loges

v,.rJj v,.rJj

You

I o In the installation procedure, be careful not to catch your fingers between the _ |

............../

(D- 47

Page 50

Appendix

= • | - 0 I | = A - f SCREW

Wall Mount Kit Specifications

Standard dimensions for wall mount kits are shown below. The wall mount kit (sold separately) allows you to mount the lV on the wall.

For detailed information on installing the wall mount, , I , see the instructions provided with the product, i WALL We recommend you to contact a technician for \_\\\\\"-,"-,\ \\" ,\\\'!\\\\\ \\'_\\\\\\\\\'O, I assistance when installing it. 26V64 (75) , , I \ I

SHAF_P is not responsible for any damage to the 1027/32 (275) ] i \ WALL MOUNT KIT

product or injury to yourself or others if you elect to ÷

install the wall mount on your own. 1 __' _1

, Install your wall mount on a solid wall

perpendicular to the floor.

Do not attach the wall mount to plaster board _ _ii t_

or similarly weak materials. Please contact your

nearestreta,e.adviserforadditionalinformation. ......................°

if you install the TV on a ceiling or slanted wall, _,_-1 _-_ _ [_'l _o _

it may fall and result in severe personal injury. _ I , Do not mount the TV at a tik.

........81; i , Do not use screws that do not comply wkh the VESA standard

screw specifications.

, Due to the terminal configuration on this TV, when , Do not use screws that are longer than the standard length.

you wall-mount this model, make sure there is enough Screws that are too long may cause damage to the inside of the

space between the wall and the TV for the cables. 249/64 TV.

, To use this TV mounted on a wall, remove the AO cord 153/4(400) / _ , Do not fasten the screws too firmly or loosely. This may damage

holder on the rear of the TV, and then use the screws _ WALL MOUNT KIT -- the product or cause the product to fall, leading to personal injury. supplied with the wall mount bracket to secure the SHARP is not liable for these kinds of accidents. bracket to the rear of the TV. , SHARP is not liable for product damage or personal injury when

a nonWESA or non-specified wall mount is used or the consumer

The location of the AC cord holder differs depending on

..... _,_ When mounting your TV on a wall, avoid that the DuoBass unk on the rear does not come in contact fails to follow the product installation instructions.

whether it is in its shipment Iocahon t _, or has been used wRh the wall. Use a Wall Mount KR wRh bracket thickness *_of 249/64 inches (70 mm) or more and as a cable tie {B_. inteFbracket space .2 of 12 sg/u4inches (320 mm) or more.

Attached location

at shipment 123%4 (320) or more Do not install the wall mount kit while your TV is

÷ turned on. It may result in personal injury due to

[ _:_- ](_) 4L@ Space*2 °4v__ i! 2 49/64(70) Or mOreThickness .1 electric shock.

WALL MOUNT KIT 11 _3/_s WALL MOUNT KIT

(300)

If used as a cable tie DUO Bass

15 3/4(400)

(VESA pitch)

WALL MOUNT _ .......................

MOUNT'_ I _E_TNOE

Iq£[TES........................./ _MOUNTING HOLES

For the screws, refer to the table shown below.

Standard screws M6 (Use 1.0 p_tch screws.) Length

(Depth of mounting holes) 15/32 (12)

Quantky 4 pcs.

_- 48

Page 51

Appendix

Problem Possible Solution

No power _ Check if you pressed POWER on the remote control unR. MJ,Page 13

Is the AC cord disconnected? m), Page 6 Has the power been turned on? _ Page 13

Unit cannot be * External influences such as lightning, static electricity, may cause improper operation. operated. In this case, operate the unR after first turning off the power of the TV or unplugging

the AC cord and replugging it in after 1 or 2 minutes.

Remote control unR does not operate.

Is the equipment to be operated by the remote control unit set correctly? Press "IV to

set the remote control unR to the setting for operating the TV. Are batteries inserted wRh polarity ( I , -) aligned? _ Page 7 Are batteries worn out? (Replace wRh new batteries.) Are you using R under strong or fluorescent lighting?

Is a fluorescent light illuminated near the remote control sensor?

Is "PC Control Lock" selected in "Operation Lock Out"? q' Page 24

Picture is cut off/with * Is the image posRion correct? _ Pages 24 and 41 sidebar screen. * Are screen mode adjustments such as picture size made correctly?

m).Pages 17 and 18

Strange color, * Adjust the picture tone. _ Pages 21 and 22 light color, or color * is the room too bright? The picture may look dark in a room that istoo bright. misalignment

Power is suddenly * is the sleep timer set? _ Page 16 turned off. * Check the power control settings. • Page 23

o The unit's internal temperature has increased. Remove any objects blocking vent or clean.

No picture _ is connection to other components correct? _ Pages 10 to 12 and 38

is the correct input selected? uS' Pages 10 and 15

, is "On" selected in "Audio Only"? Rj, Page 28 , if the PC image is not displayed, check the following:

- When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monRor.

- Check the resolution setting on the PC. Is a non-compatible signal being input?

Page 42

Picture quality of HD programs is poor.

To enjoy HD images from external equipment, you are required to set up HDMI

connection or component connection.

, Ifthe program content is not of HD quality, HD images cannot be displayed. Check

that the program you are viewing provides HD images.

, The HD cable/satelIRe set-top box may need to be configured to output HD images

via cable/satellite.

, The cable/satellite broadcast may not support a signal resolution of 1080p.

The TV sometimes _ This is not a malfunction. This happens when the cabinet slightly expands and makes a cracking contracts according to change in temperature. This does not affect the TV's sound, performance.

Some Intemet _ The TV has only limked functions compared with regular PC browsers. • Page 45 functions used on a PC are not available from the TV.

Problem

o No sound

Possible Solution

Is connection to other components correct? _)' Pages 10 to 12 and 38 is the volume too low? _ Page 15 Is "Variable" selected in "Output Select"? mi_ Page 24 Have you pressed MUTE on the remote control unR? mj, Page 15

• Check the audio output of the connected external equipment. Is the volume toe low or muted?

When external equipment is connected via an HDMI cable, you may need to configure the audio to be output through the HDMI cable. When audio is not output from external equipment connected to the PC IN or HDMI IN 2 terminal, check the "Audio Select" setting. _J' Page 41

Even when external equipment is connected using an HDMI-certified cable, an audio cable connection may be required depending on the type of equipment and the media being played back. In this case, in addition to connecting an HDMI-certified cable to the HDMI IN 2 terminal, connect a © 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMl+Analog". mS,Page 41 When connecting a PC via an HDMI-certified cable, check the following:

- Is the audio output of the PC configured correctly? Check the audio output settings and output audio format in Sound Properties on the PC. The audio formats compatible with this TV are PCM, Dolby Digital and DTS. WRh other formats, audio cannot be output.

- Depending on the board, only video signals may be output. In this case, in addRion to connecting an HDMI-certified cable to the HDMI IN 2 terminal, connect a ©

3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMl+Analog". _ Page 41

If you are using a DVI-HDMI conversion cable to connect external equipment to the

TV, check the following:

- is an audio cable connected? The DVI-HDMI conversion cable is for video only. Connect a © 3.5 mm stereo minijack cable to listen to the audio.

- Is HDMI IN 2 being used2 When the TV is connected to another HDMI IN terminal, the audio and video are not output together even if a © 3.5 mm stereo minijack cable is connected to the shared AUDIO iN terminal for PC iN and HDMI iN 2.

- Check the "Audio Select" setting. Set "Audio Select" to "HDMl+Analog". mj_Page 4t

M iiiiiiii_.....

Problem Possible Solution

3D images are not _ Is "3D Auto Change" set to "Off"? Press 3D to switch to 3D mode. _ Page 30 displayed. * If "3D Auto Change" is set to "Mode 1" or "Mode 2" but no 3D images are displayed,

check the display format of the content being viewed. Some 3D image signals may not be recognized as 3D images automatically. Press 3D to select the appropriate display format for the 3D image, mS'Pages 30 to 3t

is the power of the 3D Glasses turned on?

Are the 3D Glasses set to 2D mode?

For further details, refer to the operation manual of your 3D Glasses.

(_)- 49

Page 52

Appendix

iiiiiii#i...... CLEARING THE SECRET NUMBER

The example of an error Error message displayed on a code

screen

Possible Solution

, Failed to receive E202

broadcast. , No broadcast now. E203

, An incompatible

audio signal has been

received. Check the

output device settings.

, Check the antenna cable. Check that the antenna is correctly setup.

, Check the broadcast time in the program guide. , This message is displayed when an audio format other than PCM, DTS or

Dolby Digkal is input.

Set the audio output format of connected external HDMI equipment to

PCM, DTS or Dolby Digkal.

Refer to the operation manual of the external equipment for setting

details.

You can read the software licenses in the on-screen display menu. Refer to "lnformatien" > "Software License".

If you forget the secret number, clear the secret number using the following procedure.

1 Select an item from the list below to display the secret number input screen. (For operating the on-

screen display menu, see page 19.)

, "Color system" (_ "Terminal Setting", System Options menu). , "EZ Setup" or "Reset" {_ InRial Setup menu). , "OH Setup" (_ "Broadcasting Setup" _ InRial Setup menu). , "Parental CTRL" (_ "individual Setup", initial Setup menu).

• "Interactive Service" (_ "lntemet Setup" _ Initial Setup menu). , "Software Update" {_ Information menu).

2 Press and hold both CNA and VOL + on the TV simultaneously until the message appears on the

screen.

The secret number is LL_"

, As a precautionary measure, make a note of your secret number above, and keep Rin a safe place.

[] Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties,

Cautions regarding use in high and low temperature environments , When the unk is used in a low temperature space (e.g. room, office), the picture may leave trails or appear

slightly delayed. This is not a malfunction, and the unR will recover when the temperature returns to normal.

, Do not leave the unR in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight

or near a heater, as this may cause the cabinet to deform and the front panel to malfunction. Storage temperature: - 4°F to _140°F (- 20°0 to _ 60°0)

_- 50

Page 53

Specifications

item Model: LC-7OUDI U

Size

LCD panel

Resolution TV-standard (COlR)

VHF/UHF CATV

TV Function Receiving Channel

Digital Terrestrial Broadcast (SVSB) Digital cable*l (64/256 QAM)

Audio multiplex

Audio out

Side SD card slot

HDMI IN 1 HDMI IN 2

Back panel HDMI IN 3 vertical inputs HDMI IN 4

AUDIO OUT USB 1"2 COMPONENT IN

Terminals VIDEO IN 1

Back panel VIDEO IN 2 surfaee inputs

PC IN RS-2320 ANT/CABLE AUDIO IN

Back panel DIGITAL AUDIO OUT horizontal inputs

ETHERNET

USB 2*2 OSD language Power Requirement

On Mode Power Power Consumption

TV + stand Weight

TV only

TV + stand

TV only

Dimensions*3 (W × H x D)(inch)

Operating temperature

"1 Emergency alert messages via Cable are unreceivable.

*2 Skype is available for the USB terminal. See page 8 for details. *3 The dimensional drawings are shown on the inside back cover.

70" Class (69 _/2"Diagonal)

8,294,400 pixels (3,840 x 2,160) American TV Standard ATSC/NTSC System VHF 2=13ch, UHF 14-69ch

1=135ch (non-scrambled channel only)

2=69ch

1=136ch (non-scrambled channel only)

BTSC System

10W x 2 + 15W (WF)

SD/SDHC memory card*4

HDMI in with HDCP, ARC

HDMI in with HDCP

HDMI in with HDCP, MHL Audio out (@3.5 mm stereo jack)

Photo/Music/Video mode, Software update, USB keyboard/mouse, Wallpaper Picture

9=pin D=sub male connector

Optical Digital audio out × 1(POM/Dolby Digital/DTS)

Network connector

Photo/Music/Video mode, Software update, USB keyboard/mouse, Wallpaper Picture

English/French/Spanish AC 120 V, 60 Hz

189W

405 W (0.15 W Standby with AC 120 V)

121.3 Ibs./66.0 kg

103.6 Ibs./47.0 kg

62 9/_ :_ 39 7/32 X 14 47/64

62 9/_ :_ 37 _3/32x 4 _/2

+32°F to + 104°F (0°C to +40°0)

*4 if you insert any card other than the SD/SDHC (class 6 or higher), it will not work.

As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement wRhout prior notice. The performance

specification figures indicated are nominal values of production unRs. There may be some deviations from these values in individual units.

@- 51

Page 54

This TV has received the following certifications,

- Wi-Fi CERTIFIED TM(certification program from the Wi-Fi Alliance ®)

- Wi-Fi Protected Setup TM (certification program from the WPFi Alliance ®)

Specifications

iMPORTANT SAFETY iNSTRUCTiONS

FCC This device complies wkh part 15 of the FOC Rules. Operation is subject to the following two condkions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsble for compliance could void the user's authorky to operate the equipment. To comply wkh the Foe RF exposure compliance requirements, this device and ks antenna must not be ce-bcated or operated in conjunction wkh any other antenna or transmkter. The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co- channel mobile satellite systems; The maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz) to comply wkh the e.i.r.p, limit; and High@ower radars are allocated as primary users (meaning they have priority) of the bands 5250- 5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.

COFETEL This equipment operates on a secondary basis and, consequently, must accept harmful interference, including from station of the same kind, and may net cause harmful interference to systems operating on a primary basis.

CONTAINS TRANSMIWER MODULE COFETEL ID:RCPSHTW11-1252 Brand: SHARP Model: TWFM-B005D

Specification

Standard IEEE802.11a/b/g/n

2412-2484 MHz

Frequency Band 5150-5850 MHz

Static WEP (64/128 bit key Index 1 only)

Securky WPA-PSK (TKIP)

WPA2-PSK (AES)

DBPSK@I Mbps DQPSK@2Mbps 00K@5.5/11Mbps

Modulation BPSK@6/9 Mbps

QPSK@I 2/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mbps and above, Rx up to 300Mbps

Notes on Radio Wave Certification in the U.S.A. and Canada

This device complies wkh part 15 of the FCC Rules. Operation is subject to the following two condkions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

"This transmitter must not be co-located or operated in conjunction with any other anntenna or transmitter." FCC/INDUSTRY CANADA NOTICE

This device complies wkh Part 15 of Foe Rules and Industry Canada license-exempt RSS standard(s). Operation is

subject to the following two condkions: (1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of this device. This equipment complies wkh FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement O to OET65 and RSS- 102 of the IC radio frequency

(RF) Exprosure rubs. This equipment has very low levels of RF energy that are deemed to comply wkheut testing of

specific absorption ratio (SAR).

FCC CAUTION

Changes or modifications not expressly approved by Hosiden responsible for compliance could void the user's

authorky to operate the equipment.

Note: This equipment has been tested and found to comply wkh the limks for a Class B digital device, pursuant to

Part 15 of the Foe Rubs. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation, if this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures: __ Reorient or relocate the receiving antenna. __ increase the separation between the equipment and receiver. __ Connect the equipment into an outlet on a circuk different from that to which the receiver is connected. __ Consult the dealer or an experienced radie/TV technician for help.

This Class B digital apparatus complies wkh Canadian ICES-003

Le present appareil est cenforme aux la prtie 15 des regles de la FCC et CNR d'lndustrie Canada applicables aux

appareils radio exempts de licence. L'expbkatien est autorisee aux deux condkions suivantes : (1) I'appareil ne dolt

pas produire de breuillage, et (2) I'uitilisateur de I'appareil doit accepter tout brouillage radieelectrique subi, m6me si le

brouillage est susceptible d'en cempremettre le fenctiennement.

Cet equipement est cenferme aux limites d'exposition aux rayennements enoncees pour un environnement non

contr61e et respecte les regles les radioelectriques (RF) de la Foe lignes directrices d'exposition dans le Supplement C

L_OET65 et d'expeskien aux frequences radioeiectriques (RF) ONR-102 de I'lC. Cet equipement emet une energie RF tres faible qui eet coneider6e conforme sans evaluation du debk d'abeorption specifique (DAS).

Cet appareil numerique de la classe Best cenforme a la nerme NMB-3 du Canada.

Notas sobre la Certificaci6n de Radiodifusi6n en M_xico

OOFETEL: RCPSHDB12-1487

Nombre de la marca del m6dule con licencia: Sharp Corporation

Nombre de modelo del m6dulo con licencia: DBUB-S705

M6dule DBUB-S705 instalade adentro de esta gafas

PRECAUCION

"La operacbn de este equipo esta sujeta alas siguientes dos condiciones: (1) es posble que este equipo o dispositivo

no cause interferencia perjudicial y (2) este equipe o dispeskivo debe aceptar cualquier interferencia, incluyende la que

pueda causar su operacbn no deseada."

N0mere de licencia para la certificacbn de radiodifusi6n

Estades Unidos CONTAINS FCC ID: VIYARC0517

Canad_ CONTAINS IC: 7305A-ARC0517

Specification

Ver. name I Vet. 3.0+EDR

mprofile name I HID

_- 52

Page 55

Trademarks

SmartCentral is a registered trademark of Sharp Corporation.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

DivX ®, DivX Certified ®, DivX Plus ® HD and associated Iogos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.

DLNA ®, the DLNA Logo and DLNA CERTIFIED TM are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

This product includes DLNA Software 'DiXiM' developed by DigiOn, Inc.

L C _' ;_ :/F, L C F O N T, TJD-_'--:7 :_ M I" and LC logo mark are registered trademarks of SHARP

Corporation.

This product is embedded with LC Font technology, which was developed by SHARP Corporation for

clearly displaying easy-to-read characters on LCD screens. However, other fonts are used for some screen pages, too.

i * Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and |

worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered

Rights Reserved.

i _ MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL LLC i

in the United States and other countries.

MHL TM

i * The Bluetooth ® word mark and Iogos are registered trademarks owned by Bluetooth SIG, Inc. and any use

of such marks by SHARP Corporation is under license. Other trademarks and trade names are those of

1their respective owners.

i * THX and the THX logo are trademarks of THX Ltd. and are registered in some jurisdictions. The THX 4K |

i _ SDHC Logo is a trademark of SD-3C, LLC. |

ABOUT DlVX VIDEO: DivX ® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified e device that plays DivX video. Visit divx.com for more information and

software tools to convert your files into DivX videos.

ABOUT DlVX VIDEO-ON-DEMAND: This DivX Certified e device must be registered in order to play

purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

Netflix and the Netflix logo are the registered trademarks of Netflix, Inc.

VUDU TM is a trademark of VUDU, Inc.

Skype TM, the Skype Logo and the S logo and other marks indicated on these instructions are trademarks of Skype Limited or other related companies.

_:)- 53

Page 56

Calling for Service

For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP,

LiMiTED WARRANTY

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATIGN warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the "Product"), when shipped in its original container, will be free from detective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the detective Product or part thereot with a new or remanutactured equivalent at no charge to the purchaser for parts or labor tor the period(s) set forth below.

This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may vary. Please conrad 1-888+GO+SHARP for further information.

In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of purchase to the servicer, which proof must include the date of purchase.

To the extent permitted by applicable state law, the warranties set forth are in lieu ot, and exclusive of, all other warranties, express or implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS

AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESSFORA PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIEDWARRANTIES ISLIMITED TO THE PERIOD(S) FROM

THE DATE OF PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAYALSO HAVE OTHER RIGHTSWHICH VARY FROM STATE TOSTATE.

The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser and only tot the time periods set forth herein. No other representations or promises made by anyone are permilled. Correction of detects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable care, alteration, modification, tampering, misuse, improper operation or maintenance or any damages or detects in the Product which were caused by repairs or attempted repeirs performed by anyone other than a Shalp authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on warranties or on remedies for breach incertain transactions; insuch states, the limits herein may not apply.

THIS LIMITED WARRANTY IS VALID ONLY IN THE RFTY {50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RaCO.

Model Specific Section

Your Product Model Number & Description: LC-70UD1U

LCD Color Television (Be sure to have this information available when you need service for your Product.)

Warranty Period for this Product: One (1) year parts and labor from the date of purchase. Additional Exclusions from In order for the Product to be serviced, the Product must be readily available to

Warranty Coverage (if any): the servicer, free and clear of any complex or non-standard installation, mounting

or other encumbrance which would unreasonably interfere with servicing the Product. The Servicer will remount the Product after service, provided that such remounting is not into a complex or non-standard installation. Any additional labor and materials required to remove and/or reinstall a Product above and beyond the foregoing are not covered by ftds warranty, may result irl additional charges and are the responsibility of the consumer. Image Retention resulting from a fixed image being displayed for long periods of time is not covered by this Limited Warranty (see Operation Manual on how to prevent this).

Where to Obtain Service: From a Sharp Authorized Servicer located in the United States. To find the

location of the nearest Sharp Authorized Servicer, please call Sharp toll free at 1-800-BE-SHARP.

What to do to Obtain Service: Contact your Sharp Authorized Servicer to obtain in home service for this

product. The Servicer will come to your location and if necessary remove the unit for repair at the Servicer's facility and return the set to you once completed. Be

sure to have Proof of Purchase available.

TO OBTAIN PRODUCT INFORMATIONOR PURCHASEACCESSORIESAND EXTENDEDWARRANTIES, CALL

1-800-BE-SHARP

OR VISIT www.sharpusa.com

_- 54

LIMITED WARRANTY

Consumer Electronics Products

Congratulations on your purchase!

Sharp Electronics of Canada Ltd. ("Sharp") warrants to the first purchaser for this Sharp brand product ('+Product"), when shipped in its original container and sold or distributed in Canada by Sharp or by an authorized Sharp dealer, and Product was not sold "as is" or "sales final" that the Product will during the applicable warranty period, be free from defects in material and workmanship, and will within the applicable warranty period, either repair the defective Product or provide the first purchaser a replacement of the defective Product.

Conditions: This limited warranty shall not apply to: (a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate use

as outlined in the owner's manual or other applicable Product documentation.

(b) Any defects caused or repairs required as a result of any Product that has been tampered with, modified, adjusted or repaired by any

person other than Sharp, a Sharp authorized service centre or a Sharp authorized servicing dealer.

(c) Any defects caused or repairs required as a result of the use of the Product with items not specified or approved by Sharp, including but

not limited to, head cleaning tapes and chemical cleaning agents.

(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the Product, including but

not limited to, earphones, remote controls, AC adapters, batteries, temperature probe, trays, filters, belts, ribbons, cables and paper. re) Any cosmetic damage to the Product surface or exterior that has been defaced or caused by normal wear and tear. (f) Any defects caused or repairs required as a result of damage caused by any external or environmental conditions, including but not

limited to, transmission line/power line voltage or liquid spillage or acts of God. (g) Warranty claims for Products returned with illegible or without appropriate model, serial number and CSA/cUL markings. (h) Any Products used for rental or commercial purposes. (i) Any installation, delivery, setup and/or programming charges (j) The removal and reinstallation of Over-The-Range Microwave or Microwave Drawer if it is installed in an inaccessible location or requiring

removal of cupboards, handles or other cosmetic parts, or is not installed in accordance with installation instructions included with Product. How to get service: Warranty service may be obtained upon delivery of the Product, together with proof of purchase (including date of purchase) and a copy of this limited warranty statement, to an authorized Sharp service centre or an authorized Sharp servicing dealer. In home warranty service will be carried out to locations accessible by on-road service vehicle and within 50 km of an authorized Sharp service

centre on any Sharp Television with the screen size of 42" or larger and on any Over-The-Range Microwave Oven or Microwave Drawer Oven. The servicer may if necessary take the unit for repair at the servicer's facility. No other person (including any Sharp dealer or service centre) is authorized to extend, enlarge or transfer this warranty on behalf of Sharp. The purchaser will be responsible for any and all removal, reinstallation, transportation and insurance costs incurred with exception for Over-The-Range Microwave Oven or Microwave Drawer Oven whereby Sharp will be responsible for the removal and reinstallation.

The express warranties in this limited warranty are, except for consumer purchasers domiciled in Quebec, in lieu of and, except to the extent prohibited by applicable law, Sharp disclaims all other warranties and conditions, express or implied, whether arising by law, statute, by course of dealing or usage of trade, including, without limitation, implied warranties or conditions of merchantability and/or quality, fitness for a particular use or purpose, and/or non-infringement. [.imitations (not applicable to consumer purchasers domiciled in Quebec to the extent prohibited under Quebec law): (a) Sharp shall not be liable for any incidental, special, consequential, economic, exemplary or indirect damages of any kind or nature (including lost profits or damages for loss of time or loss of use or loss of data) arising from or in any connection with the use or performance of a Product or a failure of a Product, even if Sharp is aware of or has been advised of the possibility of such damages: (b) the remedies described in this limited warranty constitute complete fulfillment of all obligations and responsibilities of Sharp to the purchaser w+th respect to the Product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. Some provinces may not allow the exclusion or limitation of certain damages, or limits on the duration or voiding of implied warranties or conditions; in such provinces, the exclusions and limits herein may not apply. This limited warranty is, except for consumer purchasers domiciled in Quebec, governed by the laws of the Province in Canada in which the purchaser has purchased the Product. For consumer purchasers domiciled in Quebec this limited warranty is governed by the laws of Quebec.

WARRANTY PERIODS (calculated from the date of original purchase): Parts & Labour (exceptions noted)

Audio Product 1 year Blu-Ray Product 1 year Projector 1 year (lamp 90 days) LOD/LED TV 1 year Microwave Oven 1 year (magnetron - 4 additional years) Air Purifier 1 year Portable Air Conditioner 1 year Plasmacluster Ion Generator 1 year 3D Glasses 1 year Wireless LAN Adapter 1 year

To ebtain the name and address of the l_earest Authorized SharI) Service Centre or Dealer, or R>rmore inf_>rrnatiot_ on this Limited Warranty, Shm_ Extended Warranty OIt_rs, Sharp Canada Products or _;¢__ _N_ _t_

Accessory Sa]es, please contact Sharp:

+ By writing to Sharp Electronics Of Canada Ltd. at 335 Britannia Road East SHAr_I ::_

Mississauga, Ontario L4Z lwg + CaUing: at 905-568-7140 + Visiting our Web site: www.sharp.ca

THiS LiMiTED WARRANTY iS VALID ONLY iN CANADA

Revision: 03/01/13

Page 57

Dimensional Drawings

03 cO

62 9/64(1578)

b_ CO

60 19/32(1539)'1

I-

cO co

............ ........................................................................

h 7,:,700,,1

2 7/32(56)*2

4 1/2(11 4)*3

6 5/16(160)_ _

1 4 47/64(374)

Unit: inch (mm)

Unit_: pouce (mm)

Unidad: pulgada (mm)

15 3/4(400)

Too

b_ O4

"1 Active area/Area activaiZone active *2 Thinnest partYParte mas delgadaiPartie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses

Page 58

$1-1ARP

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

SHARP CORPORATION

Printed in Mexico Imprime au Mexique Impreso en Mexico

TINS-F940WJZZ

13P08-MX-NM