Sharp Aquos LC-50S50H, Aquos LC-60S50H, AQUOS LC-60UA50H, AQUOS LC-70UA50H Operation Manual
Page 1
LC-50S50H
LC-60S50H
ENGLISH
液晶彩色電视機
LCD COLOUR TELEVISION
使用說明書
OPERATION MANUAL
中文
TINS-G955WJZZ
LC-50_65S4H封面.indd 1 2016/11/2 14:02:49
Page 2
1
親愛的SHARP顧客
目錄
衷心感謝惠購SHARP液晶彩色電視機。為確保安全使用本機及令本機更加耐用，在使用本產品之前請務必仔細
閱讀關於安全的重要注意事項。
使用說明書
引言
親愛的 SHARP 顧客
.........................................................................................................................1
目錄
..................................................................................................................................................1
日常使用的注意事項
.........................................................................................................................3
關於安全的重要注意事項
..................................................................................................................4
商標
..................................................................................................................................................5
附件
..................................................................................................................................................6
準備
安裝底座組件
....................................................................................................................................7
壁掛電視機的處置和注意事項 ..........................................................................................................8
部件名稱
...........................................................................................................................................8
電視機（前視圖）................................................................................................................8
電視機（後視圖）................................................................................................................9
遙控器..............................................................................................................................10
電視機操作按鍵................................................................................................................10
在開啟電源之前
..............................................................................................................................11
連接外部設備
..................................................................................................................................12
使用數碼音頻輸出 ..........................................................................................................................13
插入 SD/SDHC 記憶卡（市面有售）
...............................................................................................13
連接 USB 存儲設備
........................................................................................................................ 13
連接到網絡
..................................................................................................................................... 13
裝入電池
.........................................................................................................................................14
使用遙控器 ..................................................................................................................................... 14
關於遙控器的注意事項.....................................................................................................14
開啟或關閉電視機
..........................................................................................................................15
首次開啟電視機
................................................................................................................15
關閉電視機
.......................................................................................................................15
用戶指南
.........................................................................................................................................15
觀看電視
選項表 ............................................................................................................................................16
聲音切換..........................................................................................................................16
音頻語言..........................................................................................................................16
字幕語言..........................................................................................................................16
回看.................................................................................................................................. 16
信息.................................................................................................................................. 16
EPG..................................................................................................................................16
頻道列表..........................................................................................................................16
頻道編輯..........................................................................................................................17
數字鍵盤..........................................................................................................................17
HDMI 選擇.......................................................................................................................17
設置.................................................................................................................................. 17
一般設置 ...........................................................................................................17
主題
......................................................................................................17
開機狀態
..............................................................................................17
語言設置
..............................................................................................17
預設輸入法
...........................................................................................17
快速啟動
..............................................................................................17
無訊號自動關機
...................................................................................17
定時關機
..............................................................................................17
LC-50_60S50H_CT.indd 1 2017/09/15 17:56:23
Page 3
2
目錄
觀看電視（續）
影像 ...................................................................................................................18
影音模式..............................................................................................18
對比度 / 亮度/色調 / 銳度 / 色彩 / 背光 / 伽瑪校正...............................18
色溫......................................................................................................18
寬屏模式..............................................................................................18
圖像抑噪..............................................................................................18
Fine Motion（僅適用於LC-50S50H）.................................................18
動態對比度...........................................................................................18
還原......................................................................................................18
音頻 ...................................................................................................................19
影音模式..............................................................................................19
自動音量..............................................................................................19
低音 / 高音 / 平衡.................................................................................19
環繞聲..................................................................................................19
音頻輸出..............................................................................................19
還原......................................................................................................19
頻道設置 ...........................................................................................................19
執行自動頻道搜尋................................................................................19
數碼頻道設置.......................................................................................19
模擬頻道設置.......................................................................................19
頻道編輯..............................................................................................20
網絡 ...................................................................................................................20
應用程式 ...........................................................................................................20
選項 ...................................................................................................................20
數碼音頻語言.......................................................................................20
字幕......................................................................................................20
適用於聽力障礙者................................................................................20
系統 ...................................................................................................................20
系統訊息..............................................................................................20
法律訊息..............................................................................................20
本地更新..............................................................................................20
系統還原..............................................................................................20
網絡功能
連接到網絡 ..................................................................................................................................... 21
有線安裝准备
...................................................................................................................21
無線安裝准备
...................................................................................................................21
網絡設置 .........................................................................................................................................22
有線网络連接
...................................................................................................................22
無線网络連接
...................................................................................................................22
智能功能
智能界面
.........................................................................................................................................23
電視界面 .........................................................................................................................23
應用界面 .........................................................................................................................23
安裝應用............................................................................................................23
應用程式............................................................................................................23
輸入文字 .........................................................................................................................................23
瀏覽器 ............................................................................................................................................23
其他有用功能
連接 USB 存儲設備
........................................................................................................................24
播放 USB 存儲設備中的檔案
..........................................................................................................24
用於 USB 多媒體選項表操作的按鈕
...............................................................................................25
與 USB 模式相容的檔案列表
..........................................................................................................26
附錄
故障分析
.........................................................................................................................................28
規格
................................................................................................................................................29
輪廓圖
............................................................................................................................................30
LC-50_60S50H_CT.indd 2 2017/09/15 17:56:23
Page 4
3
日常使用的注意事項
請遵守以下事項
外殼的保養方法
•
清潔外殼的時候，請用柔軟的布（棉、絨等質料）輕輕地擦拭。請不要使用附有化學成分的乾、濕抹布，因為這樣會導致
外殼本體成分的變質或裂開。
•
請注意不要使用質地堅硬的布來擦拭，或擦拭時過於用力，這樣會導致外殼表面劃傷。
•
外殼不潔的時候，可使用柔軟的布（棉、絨等質料）浸取少量稀釋過的中性洗劑，擰乾後擦拭，然後再用柔軟的乾布擦乾。
•
由於外殼為塑膠製品，汽油、稀釋劑類的溶劑會導致其變質，或塗料脫落，所以請不要使用此類溶劑來清潔外殼。
•
由於塑膠中含有塑化劑，與某些物質接觸會出現變質、塗料脫落等狀況，所以請遠離殺蟲劑等揮發性物質。另外，請不要
與橡膠和樹脂類製品長期接觸。
屏幕的保養方法
•
在開始清潔屏幕之前，請務必關閉電視機電源，並將電源插頭從插座中 出。
•
清潔屏幕時，請使用柔軟的乾布（棉、絨等質料）來輕輕擦拭屏幕表面。為了保護屏幕，請不要使用不乾淨的布、清洗劑、
或附有化學成分的乾、濕抹布等物品來擦拭，因為這樣會造成顯示屏表面的剝落。
•
請注意不要使用質地堅硬的布來擦拭，或擦拭時過於用力，這樣會導致顯示屏表面劃花。
•
屏幕不潔的時候，可以用柔軟的布（棉、絨等質料）稍微用水打濕後，輕輕地擦拭（擦拭時不可過於用力，以免造成顯示
屏表面劃花）。
•
如果液晶顯示屏表面黏上了灰塵，請使用市面有售的除塵刷（除靜電刷）來清潔。
LC-50_60S50H_CT indd 3 2017/09/15 17:56:23
Page 5
4
關於安全的重要注意事項
•
本機如果不慎摔落，外殼破損，請務必關
閉本機電源，並 出插頭。如果繼續使用，
會有火災和觸電的危險。
•
請不要打開後殼改造電路。內部存在高電
壓，會引起觸電傷害。如果需要檢修，請
聯絡經銷商。
•
以上均為示意圖，以實物為準。
•
水和潮濕 — 不要在近水之處使用本機，
例如在靠近洗澡盆、洗臉盆、廚房洗滌槽、
洗衣盆、游泳池等， 也不要在潮濕的地
下室中使用。
•
請勿在本機之上放置花瓶或任何其他盛
水的容器，或將本機放置在 冷气机、加
濕器等電器下面。若有水滴濺到本機之
上，就可能引起火災或觸電。
•
台座 — 不要將本機放置於不穩定的推
車、台 座、三腳架或桌面上。不穩固的
基座可能會使本機掉落，導致嚴重的人
身傷害、以及產品損壞。 請僅使用本製
造商所推薦或與本產品配套出售的推車、
台座、三腳架、托架或桌子。
將本機安裝於牆上時，請務必遵照本製
造商的指示，而且只可以使用本製造商
所推薦的安裝器材。
•
將本機放置於推車上搬運時，必須小心
注意安全。急 停、用力過度、地面不平
等等，都會導致本機從推車上掉落。
•
通風 — 本機外殼上的散熱孔與其他開口
之處， 用於散熱通風。請勿堵塞這些散
熱孔或開口之處，通風散熱不良會使本
機過熱、縮短本機的使用壽命。 請勿將
本機置於臥床、沙 發、地毯或其他類似
物品之上，因為這些物品會堵塞散熱通
風孔。 本產品之設計不適用於嵌入式安
裝，所以不要將本機置於像書櫃、 機架
等封閉之處，除非提供合適的通風或遵
照本製造商的專門指示說明。
•
本機所用之液晶顯示屏是用玻璃製造的。
因此， 在受到強力撞擊或被尖銳物刻劃
時會損壞。萬一液晶顯示屏破碎， 請小
心不要受到碎玻璃的割傷。
•
熱源 — 請勿讓本機接近熱源，如取暖器、
加熱器、火爐或其他任何會產生熱力的
東西（包括擴音機在內）。
•
為防止發生火災，請勿將任何種類的蠟
燭或火焰置於本機的頂部或其附近。
•
為了防止遭受起火或觸電的危險，請 勿
將交流電源線置於本機或其他重物之下。
•
請勿在本機之上放置重物或攀爬
於本機之上。這樣做可能導致本
機傾倒而造成傷害。特別要注意
近旁的兒童和寵物。
•
搬運電視機之前，請先把插頭 出。
如果不預先 出，很容易拉損電源線，
產生觸電危險。
液晶顯示屏是用非常高超的技術製造的，具有 8,294,400 個像素，
能顯示出精細的畫面。
由於像素數目極多，偶然也可能會有一些無效的像素出現在屏幕
上，看上去是固定不變的藍色、綠色或紅色的亮點。請注意，這
是屬於產品規格範圍之內，並不是故障。
在搬運電視機時的注意事項
•
在搬運電視機時，切勿握住顯示屏搬運
或使顯示屏受到壓力。
在搬運本電視機時，無論何時都必須由
兩個人以上用雙手搬運 — 電視機的每一
側用一隻手握住。
•
請勿長時間顯示靜止影像，這可能會導致殘留影像。
•
請將本機安裝於能將交流電源線容易從交流電源插座 出的地方。
•
清掃 — 在清掃本機之前，務必先將交流
電源線插頭從交流電源插座中 出。用
擰乾的濕布將本機擦拭乾淨。請勿使用
液態清潔劑、噴霧清潔劑或化學布料清
潔，因為這類材質可能會對產品造成損
害。
LC-50_60S50H_CT indd 4 2017/09/15 17:56:23
Page 6
5
LC-50_60S50H_CT indd 5 2017/09/15 17:56:23
商標
•
HDMI、HDMI高清晰度多媒体接口及HDMI 商標為HDMI Licensing Administrator, Inc. 於美國及其他國家的商標或註冊商標。
•
Wi-Fi CERTIFIED 標誌是 Wi-Fi 聯盟的認證標誌
。
•
SDHC logo is a trademark of SD-3C,LLC
•
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
•
Dolby, Dolby Audio, 和雙D記號是杜比實驗室的商標。本產品經過杜比實驗室的授權而製造。未公佈的機密作品。版權所
有1992-2015杜比實驗室。保留所有權利。
•
**For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and
the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries ©
DTS, Inc. All Rights Reserved.
•
本使用說明書已進行過嚴格的校勘和核對，但因軟體升級等因素，SHARP 不能保證用戶實際操作與說明書描述完全一致
。
DISCLAIMERS
• This SHARP device facilitates the access to content and services provided by third parties. The content and services
accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content
and services must be in accordance with any authorization or terms of use provided by such content or service provider.
SHARP shall not be liable to you or any third party for your failure to abide by such authorization or terms of use. Unless
otherwise specifically authorized by the applicable content or service provider, all third party content and services provided
are for personal and non-commercial use; you may not modify, copy, distribute, transmit, display, perform, reproduce,
upload, publish, license, create derivative works from, transfer or sell in any manner or medium any content or services
available via this device.
• SHARP is not responsible, nor liable, for customer service-related issues related to the third party content or services.
Any questions, comments or service-related inquiries relating to the third party content or service should be made
directly to the applicable content or service provider.
• You may not be able to access content or services from the device for a variety of reasons which may be unrelated to
the device itself, including, but not limited to, power failure, other Internet connection, or failure to configure your device
properly SHARP, its directors, officers, employees, agents, contractors and affiliates shall not be liable to you or any third
party with respect to such failures or maintenance outages, regardless of cause or whether or not it could have been
avoided.
• All third party content or services accessible via this device is provided to you on an “as-is” and “as available”
basis and SHARP and its affiliates make no warranty or representation of any kind to you, either express or implied,
including, without limitation, any warranties of merchantability, non-infringement, fitness for a particular purpose or any
warranties of suitability, availability, accuracy, completeness, security, title, usefulness, lack of negligence or error-free
or uninterrupted operation or use of the content or services provided to you or that the content or services will meet your
requirements or expectations.
• SHARP is not an agent of and assumes no responsibility for the acts or omissions of third party content or service
providers, nor any aspect of the content or service related to such third party providers.
• In no event will SHARP and/or its affiliates be liable to you or any third party for any direct, indirect, special, incidental,
punitive, consequential or other damages, whether the theory of liability is based on contract, tort, negligence, breach of
warranty, strict liability or otherwise and whether or not SHARP and/or its affiliates have been advised of the possibility of
such damages.
•
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A
CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
•
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND
COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
Page 7
附件
6
隨機附件
請確認如下附件隨同本機附送
。
遙控器
“AAA”型電池 （ x 2）
使用說明書
插入電池使用
。
第 10 頁 第 14 頁
底座組件
第 7 頁
底座組件
（x2）
螺絲釘
（
x
4）
“R”
“L”
LC-50_60S50H_CT indd 6 2017/09/15 17:56:23
Page 8
7
準備
•
安裝底座組件時，需將電視機正面朝下平放在平台上。
•
在安裝（或拆卸）底座組件之前，請將交流電源線從交流電源插座中 出。
•
在執行操作之前，請在將放置電視機的地方鋪設減震墊，以防電視機損壞。
安裝底座組件
•
正確安裝底座組件。
•
請務必遵照說明進行安裝。若底座組件安裝不正確，則可能導致電視機傾倒。
將電視機如圖平放於軟墊上，將底座組件插
入電視機底部的凹槽內（緊握底座以免掉
落），請確保電視機本體下部的螺丝孔與底
座支架上的螺丝孔同心。
底座裝配到位後，用附件中的4枚螺絲釘固
定。
螺絲釘
1
2
• 安裝底座时，需将電視機正面向下平放在平台上，平放前
先在平台上铺一层软垫。
•
若要拆下底座組件，請按相反的順序執行以上步驟。
•
底座组件不允許調節角度。
•
本產品未有附帶螺絲批。
•
在安裝過程中，請小心操作，以免您的手被電視機底部和
地面夾到。
LC-50_60S50H_CT indd 7 2017/09/15 17:56:23
軟墊
Page 9
8
準備
電視機（前視圖）
•
本說明書中的插圖和螢幕顯示是以解釋為目的，可能與實際操作略有差別。
•
本說明書中所有插圖全部是根據 LC-50S50H 進行說明。
部件名稱
壁掛電視機的處置和注意事項
•
可用另外購買的托架，將電視機安裝在牆上。
。•
詳情請參閱另外購買的托架所附之說明書
•
本電視機只能使用 SHARP 公司推薦的掛牆架來將電視機安裝到牆上。使用其他掛牆架可能導致安裝不穩而引致嚴重人身傷害。
•
安裝液晶彩色電視機需要特別的技能，只有具有專業資格的服務人員才能夠安裝。用戶不可自己進行這項工作。對於不正確
的安裝，或是由於安裝引起的事故或傷害，SHARP 不承擔任何責任。
使用另外購買的托架來安裝電視機
•
可請經資質認證的服務人員用另外購買的托架將電視機安裝到牆上。
•
在開始操作之前，請先仔細閱讀隨同托架提供的使用說明書。
LC-50_60S50H_CT indd 8 2017/09/15 17:56:23
電源指示燈遙控感應器
Page 10
9
準備
電視機（後視圖）
LC-50_60S50H_CT indd 9 2017/09/15 17:56:23
SD/SDHC卡槽
HDMI 1 端子
服務專用
天線端子
（ATV/DTV）
色差/影音輸入端子
操作按鈕
USB 1 端子
USB 2 端子
數碼音頻輸出端子
LAN端子
HDMI 2 端子
HDMI 3 端子
Page 11
10
準備
1 POWER（電源備用 / 開啟）
開啟和關掉電源。（請參閱第 15 頁。）
2
按該鈕進入智能界面。
3
上一頁
跳至上一頁， 可在智能界面中切換電視或應用界
面。
4 （游標）
在設置畫面上選擇一個所需的項目。
5 OK（輸入）
執行一個命令。
6 VOL +/-（音量
＋/－
）
設置音量。
7
（
選項表
）
顯示電視機的選項表。
8
下一頁
跳至下一頁， 可在智能界面中切換電視或應用界
面。
9
（返回）
返回到前一個
選項表畫面。
10 CH （
頻道
/
）
電視輸入模式：選擇上一個 / 下一個頻道。
11
（瀏覽器）
按該鈕進入瀏覽器界面。
遙
控器
您也可以使用電視機上的操作按鈕來進行電視設置。
（電視機的操作按鈕位置請參閱第9頁的電視機後視
圖。）
電視機操作按鈕
按鈕動作 功能
短按 電視關機狀態下：開機
左 / 右 音量 減 / 加
上 / 下 頻道 上 / 下
長按 電視機開機狀態下：顯示選項（關機）
11
8
7
10
9
1
5
6
2
4
3
LC-50_60S50H_CT indd 10 2017/09/15 17:56:23
/ //
/
Page 12
11
準備
1
設置電視機位置之說明
•
勿使電視機受到陽光直射，並將其置於通風良好之處。
•
請將電視機置於水平的地方。
•
在連接交流電源線之前，請勿開啟電視機的電源。
•
若本機外殼上貼有保護膜，為了確保正常使用本機，請在使用前將其去除。
將交流電源線插入交流電源插座。
將天線連接到電視機的背面。
將電視機的交流電源插頭插入交流電源插座。
捆綁電線
如圖所示，將電線夾插入電視機上的孔中，並把電線放入電線夾內捆綁。
•
請將電視機置於靠近交流電源插座之處，並使電源插頭便於插
•
如長期不使用本電視機，請將交流電源線從交流電源插座中 出。
。
連接天線
為了能盡情享受清晰的電視影像，請使用室外電視天線。以下是關於同軸連接線的連接方法之簡要說明。
連接外部設備
關於連接錄影機和 DVD 影碟機等的外部設備，請參閱第 12 頁和第 13 頁。
2
3
4
交流電源插座
電視機（後視圖）
標準 DIN45325 型
插頭（IEC169-2）
75 歐姆同軸連接線
（圓形連接線）
室內天線端子
（75 歐姆類型）
天線連接線（市面有售）
接至天線端子
在開啟電源之前
•
為了防止遭受電擊的危險，在連接著電源線時，請不要觸碰接線任何未經絕緣的部份。
交流電源線
LC-50_60S50H_CT indd 11 2017/09/15 17:56:23
Page 13
12
準備
•
為保護所有的設備，在連接錄影機、遊戲機、攝錄機、DVD 影碟機、數碼電視機機頂盒（STB）、 電腦或其他設備之前，請
務必先關閉電視機的電源。
•
在進行連接之前，請仔細閱讀有關的使用說明書（數碼電視機機頂盒（STB）、 錄影機、DVD 影碟機等）。
連接外部設備
可將許多類型的外部設備連接到電視機上，如數碼電視機機頂盒 (STB)、 錄影機、遊戲機、攝錄機、DVD 影碟機
和電腦等。 要觀看外接源的影像， 請按遙控器上的
進入智能界面，按下 / 切換至電視界面，選擇您想
要進入的輸入源，按下 OK 進入。
當使用色差連接線時*（市面有售）
當使用影音連接線時*（市面有售）
當使用HDMI（高清晰度多媒體接口）連接線時（市面有售）
數碼電視機機頂盒(STB)/
錄影機/遊戲機/攝錄機/
DVD影碟機/電腦等
音频 - 右 ( 红 )
•
使用電視機機頂盒觀看電視節目時，請使用機頂盒遙控器切換頻道。
•
請按顏色插入各個端子。
•
請按顏色插入各個端子。
數碼電視機機頂盒(STB)/
錄影機/遊戲機/攝錄機/
DVD影碟機等
數碼電視機機頂盒
(STB)/錄影機/遊戲機/
攝錄機/DVD影碟機等
R– AUDIO – L
YP
B
P
R
Y(綠)
音频 - 右 ( 红 )
音频 - 左 ( 白 )
P
R
( 红 )
P
B
( 蓝 )
视频 ( 黄 )
音频 - 左 ( 白 )
* 色差與影音端子共用。
* 色差與影音端子共用。
LC-50_60S50H_CT indd 12 2017/09/15 17:56:23
Page 14
13
準備
插入 SD/SDHC 記憶卡（市面有售）
存取、讀取 SD/SDHC 記憶卡中的影片、音樂等檔案。請將儲存有相關檔案的 SD/SDHC 記憶卡插入 SD 卡槽。
請參閱第 24 頁中，有關 USB 裝置內的檔案如何播放的說明。
連接 USB 存儲設備
請參閱第 24 頁。
連接到網絡
請參閱第 21 頁和第 22 頁。
•
請按圖示方向將 SD 卡插入卡槽中。
•
SD 卡槽支援 SD、SDHC 類型的記憶卡，但部分記憶卡可能無法支援。
•
本產品支援最高 32GB 的記憶卡，請您盡量選用速度高於 Class4 的記憶卡，以保證讀寫速度更快，進而保證系統性能。
•
記憶卡需要在安全移除或關閉電視機後才可取下。
•
記憶卡不得執行熱插 操作，否則可能會令電視機故障。
。
•
請時常為記憶卡內的資料備份，防止資料損壞或電視機運作錯 （若有任何儲存資料損壞或遺失，SHARP 恕不負責）
•
DIGITAL AUDIO OUTPUT( 數碼音頻輸出端子）通常輸出與揚聲器相同的聲音（正在觀看的節目的聲音從該端子輸出）。
•
由於設備和軟體的不同，DIGITAL AUDIO OUTPUT( 數碼音頻輸出端子）無法輸出某些信號。
使用數碼音頻輸出
能夠透過 DIGITAL AUDIO OUTPUT （數碼音頻輸出端子）輸出音頻。從端子輸出 PCM或RAW（杜比數碼或
DTS 音頻）。
連接到外接音頻設備的
光纖輸入
LC-50_60S50H_CT indd 13 2017/09/15 17:56:23
Page 15
14
準備
如果電池使用不當，會導致化學物質泄漏或爆炸。請務必遵守如下所述的指示。
•
不要將不同型號的電池混合使用。不同型號的電池具有不同的特性。
•
不要將新舊程度不同的電池混合使用。如果新電池與舊電池混合使用，那麼就會縮短新電池的使用壽命，或導致舊電池的化
學物質泄漏。
•
當電池的電量耗盡之時，要立即將電池取出。從電池漏出的化學物質會腐蝕電池艙內零件。如果發現有任何化學物質泄漏，
那麼請用布將化學物質徹底擦拭乾淨。
•
由於儲存條件不同，隨同本機附送之電池可能會達不到預期的使用壽命。
•
如果將會長期不使用遙控器，那麼請將電池從遙控器中取出。
•
不要將電池暴露在如直射陽光、火等一些過熱的環境中。
1 打開電池蓋。
關於遙控器的注意事項
•
切勿使遙控器受到劇烈震動。
此外，切勿將遙控器浸泡於液體之中，或將其置於非常潮濕之處。
•
切勿在直射陽光下設置或放置遙控器。熱力將導致遙控器變形。
•
當電視機的遙控感應器處於陽光直射或強烈照明下時，遙控器可能會
會失靈。這時，請改變照明或液晶電視機的角度，或靠近遙控器感應
器操作遙控器。
在第一次使用本電視機之前，，請插入兩枚 “AAA” 型電池（附送）。 當電池耗盡， 而且遙控器不能操作時，用新
的 “AAA” 型電池替換
。
裝入電池
2 插入兩枚附送的“AAA”型電池。 3 關上電池蓋。
使用遙控器
使用遙控器時應將其指向遙控感應器。
如果在遙控器與感應器窗口之間有阻擋的物體，可能會妨礙正常操作。
遙控感應器
5 米
•
在裝入電池時 要注意電池端子
的極性要與 電 池艙 內 的極性標記
（+）和（-）一致。
LC-50_60S50H_CT indd 14 2017/09/15 17:56:23
Page 16
15
準備
•
如果長時間不使用本電視機，請務必將交流電源線插頭從
交流電源插座中 出。
•
即使電視機處於備用狀態，也會略微消耗電量。
•
如遇特殊情況導致電視機突然斷電（如停電或電網波動等），
電視機再次通電後可能工作異常。此時請按下遙控器上的
（POWER）或 插電視機電源線來重新啟動電視機。
•
在觀看電視過程中，電視機溫度會升高，此為正常現象。
•
在電視機開啟、關閉過程中，運行應用程式或系統升級過
程中，請勿隨意切斷電源，否則可能造成電視機故障。如
需關閉電視機電源，請關閉所有應用程式，並正常關閉電
視機後再關閉電視機電源。
•
電源指示燈（綠色）：電視機已經開啟。
•
您可以按下遙控器上的
（POWER）按鍵進入備用模式。
•
電視機進入備用模式，屏幕上的影像消失。
•
電源指示燈由綠變紅。按下遙控器上的
（POWER）可
再次開啟電視機。
•
如在以上備用模式下需要關閉電源，請 出電視機電源線。
電源指示燈
電視機接上電源後，進入備用狀態。
按下遙控器或電視機上的
（POWER
）:
如在 已 開 啟狀態 下（ 綠 燈 亮 ）， 按 下 遙 控 器 上 的
（POWER）或電視機上的 （POWER）按鈕：
開啟或關閉電視機
首次開啟電視機
關閉電視機
關閉 電源關閉
點亮（紅色） 電視機處於備用狀態
點亮（綠色） 電視機已開啟
語言設置
開始設置
模式設置
購買電視機之後，當首次開啟電源時，就會顯示出開
始設置的嚮導。請按照選項表所示，一步一步地進行
所需的設置。
在開啟電源之前，請先確認以下事項。
•
是否已連接天線？
•
是否已將電源插頭插入電源插座？
按下電視上的 （POWER）按鈕。
•
顯示開機畫面，之後顯示“語言設置”畫面。
•
第一次開機時間較長，請耐心等待。
可以將電視語言設置為“繁體中文”、“简体中文”或
“EN”。
開始設置，按步驟設置電視機。
您可以選擇“家居模式”或
“商店模式”
。
•
“家居模式”：“影音模式”設置的預設值為“標準”， 如您
是在家裡觀看
電視
， 建議選擇
“家居模式”
。
•
“商店模式”：僅商店展示時使用。“影音模式”設置的預設
值為“動態（固定）”。“影音模式”改變後，10 分鐘內若
未繼續設置電視機， 則電視機會自動切換回“動態（固定）”。
用戶指南
頻道設置
網絡設置
電視機會根據其設置和連接的天線搜索、分類和儲存
所有能接收的電視台。
您可以選擇“有線連接”或“無線連接”方式接入到網絡。
請參閱第 21 頁和第 22 頁。
LC-50_60S50H_CT indd 15 2017/09/15 17:56:23
Page 17
/ //
/
/
/
/
/
/
/
/
/
/
/
/
/
16
當初始設置完成後，即可進入電視的主頁面。
按下遙控器的 按鍵，或者
/ ，即可在不同
界面切換。如想觀看傳統電視節目， 請切換至電視界
面，按下 選擇模擬電視 / 數碼電視或您的
機頂盒所在的輸入源，然後按下 OK，電視螢幕開始
播放選擇的節目或輸入源。按 移動到螢幕上的
節目後按下 OK，便可以全屏播放節目。
觀看電視
在 A2 電視廣播的電視模式下
訊號 切換模式
立體聲 麗音 立體聲 、單聲道
雙語 麗音 頻道 A、麗音 頻道 B、麗音 頻道 AB、
單聲道
單聲道 麗音 單聲道 、單聲道
在麗音電視廣播模式下
訊號 切換模式
立體聲 立體聲 、單聲道
雙語
頻道 A、頻道 B、頻道 AB
單聲道 單聲道
在觀看多音頻或立體聲廣播節目時，可切換多種音頻
模式。
當播放數碼電視（DTV）節目時可切換多種音頻語言。
在電視全屏播放電視節目時按下
（選項表）
鍵，顯示功能表畫面。
在電視全屏播放電視節目時按下
（選項表）
鍵，顯示功能表畫面。
在電視全屏播放電視節目時按下
（選項表）
鍵，顯示功能表畫面。
1
1
1
按下 ， 按下 OK（輸入）來選擇所需的聲
音。
按下 來選擇所需的字幕語言，然後按下
OK（輸入）。
按下 選擇您想要觀看的頻道， 並按下
OK。
3
3
3
2
2
2
按下 ， 選擇“聲音切換”， 然後按下 OK
（輸入）。
按下 ， 選擇“字幕語言”， 然後按下 OK
（輸入）。
按下 ， 選擇“頻道列表”， 然後按下 OK
（輸入）。
•
僅在模擬電視（ATV）下可選擇聲音切換。
當廣播中含有字幕資訊時，您可以在此切換字幕語言。
顯示頻道列表。
在電視全屏播放電視節目或外部輸入源節目時
按下
（選項表）鍵，顯示功能表畫面。
1
再次按以上 1、2 步驟操作，可返回到當前的
頻道或輸入源。
3
2
按下 ， 選擇“回看”， 然後按下 OK。
您可以在當前選擇的輸入源 / 頻道和前一個輸入源 / 頻
道之間進行切換。
在電視全屏播放電視節目時按下 （選項表）
鍵，顯示功能表畫面。
在電視全屏播放電視節目時按下
（選項表）
鍵，顯示功能表畫面。
1
1
2
2
按下 ， 選擇“信息”， 然後按下 OK。
按下 ， 選擇“EPG”， 然後按下 OK， 可
顯示電子節目指南。
顯示節目資訊，僅適用於數碼電視。
電子節目指南是與數碼電視（DTV）一起被廣播的。
利用電子節目指南，您可查看數碼電視（DTV）的節
目安排及其詳細資訊。
•
EPG 顯示的時間為電視台發送的訊息。
在電視全屏播放電視節目時按下 （選項表）
鍵，顯示功能表畫面。
1
按下 來選擇所需的聲音， 然後按下 OK
（輸入）。
3
2
按下 ， 選擇“音頻語言”， 然後按下 OK
（輸入）。
回看
信息
EPG
頻道列表
字幕語言
音頻語言
聲音切換
選項表
LC-50_60S50H_CT indd 16 2017/09/15 17:56:23
Page 18
/
/
/
/
/ /
17
一般設置
無訊號自動關機
可將電視機設定為在接收不到節目的訊號後約 15 分鐘
時自動關閉電源。
•
在設定了時間後，倒計時自動開始。
•
在到達預設時間之前５分鐘開始，每分鐘會顯示一次剩餘
時間。
定時關機
在指定的時間自動關閉電視機。
可選擇的有： 、 “30 分鐘”“關” 、 “60 分鐘”、“90 分鐘”、
“120 分鐘”或“150 分鐘”。
觀看電視
在電視全屏播放電視節目時按下 （選項表）
鍵，顯示功能表畫面。
在電視全屏播放 HDMI3 訊號時按下
（選項
表）， 顯示功能表畫面。
按下 ，選擇“標籤”，按下 OK。
按下 ，選擇“排序”，按下 OK。
按下 ，選擇“跳越”，按下 OK（輸入），
當前頻道即設置成“跳越”。
1
1
1
1
1
按下 ，來選擇所需的頻道。
3
2
2
2
2
2
3
按下 ， 來選擇“頻道編輯”， 然 後 按下
OK（輸入），顯示頻道列表。
按下 ， 選擇“HDMI 選擇”為“4K(60Hz)”，
然後按下 OK（輸入）。
按下 OK 選擇字元， 直到名稱的
字元全部拼出來， 然後按下遙控器上的
（返
回）保存並且退出。
按下 ，將該頻道移動到所需的位置，然
後按下 OK（輸入）。
若再次選擇“跳越”，並按下 OK（輸入），可
取消第一步驟設置的跳越。
重複上述操作直到完成所有頻道的排序。
可手動設置某些頻道項目。
當您連接外部設備輸出 4K（60Hz） 信號時， 請使用
HDMI3 端子連接，並選擇“4K（60Hz）”。
可根據您的需求設置選項表。
刪除
排序
標籤
跳越
可以刪除各個頻道。
按下 ， 選擇“删除”， 按下 OK（輸入）， 選擇“是”，
然後按下 OK（輸入），可刪除選擇的頻道。
頻道位置可以自由地進行排序。
可更改各個頻道的名稱。
在觀看電視節目時，如果用
CH
（
頻道
）
選擇了被設置為“跳越”的頻道，該頻道就會被直接
跳過。
•
名稱的字元最多為 8 個。
•
只有 ATV 下的頻道可更改標籤。
開機狀態
主題
快速啟動
設置開機狀態。兩種狀態可供選擇：電視或智能界面。
您可以在此更換智能界面的主題模式。
可供選擇的有：清新格調、繽紛炫
。
可以縮短開啟電源後電視機的啟動時間。
•
“電視”：開機後進入電視界面。
•
“智能界面”：開機後進入智能界面。
•
在電源關閉之前的 5 分鐘，每隔一分鐘會顯示一次剩餘時
間。
語言設置
您可以設置系統的語言。
三種語言可供選擇：英文、繁體中文或簡體中文。
預設輸入法
輸入法的設定。
•
電視機初始安裝“IQQI-International” 。
•
對於非本機初始安裝的輸入法，不保證其與電視系統的相
容性。
頻道編輯
HDMI選擇
設置
數字鍵盤可直接輸入您想要觀看的電視節目的頻道號
碼。
數字鍵盤
LC-50_60S50H_CT indd 17 2017/09/15 17:56:23
/ / //
/
/
/
/
Page 19
18
觀看電視
所選擇的項目 說明
電腦 用於電腦訊號（僅在 HDMI 輸入端口時
有效）。
標準 在一般照明度的房間中以獲得高清晰度
的影像。
電影 用於電影。
遊戲 降低圖像的亮度使觀看時更加舒適。
用戶 可以根據使用者的需要進行設置。可 以
為每個輸入源設置模式。
動態 用於觀看體育運動場景以獲得較高對比
度的清晰的影像。
動態（固定） 將影像和聲音的設置恢復到出廠時的預
設值。沒有可允許的調校。
•
對於每一個輸入模式， 可選擇不同的影音模式項目。
所選擇的項目 按鈕 按鈕
對比度 減弱對比度 增強對比度
亮度 減弱亮度 增強亮度
色調 使皮膚色調略帶紫 色使皮膚色調略帶綠
色
銳度 減弱清晰度 增強清晰度
色彩
減弱色
強度 增強色 強度
背光 畫面變暗 畫面變亮
伽瑪校正 減弱中間級別亮度 增強中間級別亮度
影像
影音模式
寬屏模式
色溫
用“影音模式”功能可選擇適合於電視顯示器環境的
音頻和視頻設定。
可以為每一種影像選擇不同的屏幕模式。
可將影像調整到適合自己的喜好。
調校色溫以得到最佳的白色平衡。
可供選擇的有：高、中 - 高、中、中 - 低或低。
您可根據個人喜好對影像進行調整。
所選擇的項目 說明
標準 用於 4:3 標準影像。左右兩側都出現一個邊
緣條。
14:9 縮放 用於 14:9 的信箱型影像。左右兩側出現一
個狹窄的邊緣條，並且在某些節目情況下可
以看見頂部和底部也出現邊緣條。
全景 在這種模式下，影像被一步步拉闊到屏
幕
的兩側邊緣。
全
屏
用於 16:9 擠壓型影像。
16:9 影院 用於 16:9 信箱型影像。在某些節目時頂部
和底部可能出現邊緣條。
14:9 影院 用於 14:9 信箱型影像。在某些節目時頂部
和底部可能出現邊緣條。
逐點 在畫面上顯示同樣像素數目的影像（只適
用於接收 2160p 訊號時）。
優化掃描 僅在接收 720p/1080i/1080p 訊號時顯示“優
化掃描”影像。顯示高解像度影像時調節
到最佳。對於某些節目， 畫面邊緣可能會
出現雜波。
標準
14:9 影院 16:9 影院 全
屏
14:9 縮放
全景
•
由於輸入訊號各有不同，有可能不會顯示某些影像尺寸。
•
“14：9 縮放” 和“14：9 影院” 僅在 ATV（模擬電視）或
DTV（數碼電視）模式下有效。
•
僅適用於 24/30Hz 的輸入信號。
圖像抑噪
Fine Motion（仅LC-50S50H有）
動態對比度
減少畫面上的噪點，再現更加清晰的視頻影像。
可供選擇的有：自動、高、低或關。
使用“Fine Motion”功能可更清晰地觀賞高速運動的
影
像。
可供選擇的有：增強、標準或關。
根據畫面自動調節影像的對比度。
還原
將所有的圖像調校項目重新設定為出廠預設值。
對比度/亮度/色調/銳度/色彩/背光/伽瑪校正
LC-50_60S50H_CT indd 18 2017/09/15 17:56:23
Page 20
19
觀看電視
自動音量
低音/高音/平衡
音頻輸出
不同的聲音來源有時音量也不同，如節目及插播的廣
告時段。自動音量控制（自動音量）可通過平衡音量
解決這個問題。
可以調整所選擇的影音模式的音頻。
用該功能可選擇自己喜歡的音頻輸出制式。
音頻
影音模式
請參閱第 18 頁。
您可根據個人喜好對音頻進行調整。
所選擇的項目 按鈕 按鈕
高音 減弱高音 增強高音
低音 減弱低音 增強低音
平衡 減弱右邊音箱的聲音 減弱左邊音箱的聲音
•
在“動態（固定）”模式下，不能進行音頻調整。
•
即使選擇了“RAW”，模擬音頻和視頻輸入音頻仍然按
PCM 格式輸出。
•
即使選擇了“RAW”， PCM 輸入信號仍然按 PCM 格式輸
出。
環繞聲
還原
環繞聲功能從揚聲器產生出環繞聲效果。
將所有的音頻調校項目重新設定為出廠預設值。
頻道設置
執行自動頻道搜尋
數碼頻道設置
模擬頻道設置
即使設置預置頻道之後，您也可以再進行自動安裝。
可手動設置某些數碼頻道項目。
可手動設置某些模擬頻道項目。
您可根據個人喜好對頻道進行設置。
執行自動頻道搜尋
執行自動頻道搜尋
執行手動頻道搜尋
訊號資訊
完成自動安裝後，使用本選項表以便自動新增數碼頻
道服務。
完成自動安裝後，使用本選項表以便自動新增模擬頻
道服務。
在指定頻寬或指定頻道號碼內新增頻道服務。
顯示當前節目的“頻道”、“頻率”、“ 訊號強度”和“訊
號品質”訊息。
•
“訊號強度”和“訊號品質”是表示檢查天線相應訊號接收
的值。
•
執行自動頻道搜尋只能搜尋當前模式下的頻道。
所選擇的項目 說明
PCM16 光學輸出格式通常為 PCM 格式。
RAW 當接收到杜比數碼或 DTS 音頻格式時就
會輸出杜比數碼或 DTS 音頻。
LC-50_60S50H_CT indd 19 2017/09/15 17:56:23
Page 21
20
觀看電視
執行手動頻道搜尋
可手動設置頻道項目。
所選擇的項目 說明
儲存頻道
[1~99]
將當前節目保存至您想要的頻道， 按
OK(輸入)
鍵儲存。
現時頻道 選擇您想要手動調節的頻道。
彩色制式
選擇最佳的
色制式接收。(PAL，
SECAM， NTSC)。
聲音制式 選擇最佳的聲音制式 ( 廣播制式）接收。
(BG， DK， I， MN)。
搜尋 從當前頻道開始搜索，按照順序調整頻
率搜尋下一個頻道。
微調 對當前的頻道進行頻率的微調優化。
頻道編輯
請參閱第 17 頁。
網絡
應用程式
請參閱第 21 頁和第 22 頁。
請參閱第 23 頁。
數碼音頻語言
選項
對其他電視項目的設置。
設置首選多音頻語言，在提供音頻語言時播放。
•
本功能視乎電視台的音頻語言資訊而定。
•
若接收到的廣播訊號中不包含所選語言的音頻，那麼就不
會輸出該語言的音頻。
系統訊息
法律訊息
系統還原
本地更新
查看系統的硬件訊息和軟件訊息。
查看開放源代碼許可訊息。
利用此功能可透過 USB 設備將軟件更新到最新版本。
如果經過了複雜的調校之後，設置不能夠恢復到正常
狀態，那麼請將設置還原到出廠時的預設值。
系統
查看和設置系統相關的訊息。
•
若數據與系統不相容，則畫面上會出現一個錯
訊息。按
下
OK（輸入）
之後，請重複進入一般設置→系統→本地
更新進行操作。
•
若顯示出錯 訊息，則請檢查：
•
USB 設備是否已可靠地插入。
•
USB 設備中有 2 個或更多的軟件更新文件。
•
USB 存儲器中沒有用於更新系統的數據。
•
軟件更新文件已損壞。
•
軟件更新文件與電視機的軟件不兼容。
•
更新時，請不要切斷電視機電源或進行其他操作。
字幕
適用於聽力障礙者
當廣播中含有字幕資訊時，可以在此設置。
如果廣播中包含了用於聽覺障礙者的字幕
，
那麼該字
幕就比其他字幕優先顯示出來。
•
若接收到的廣播訊號中不包含所選語言的字幕，該語言的
字幕是不會顯示出來。
•
如果廣播中沒有包含
用於聽覺障礙者
的字幕，那麼即使設
置為“開”也不會顯示字幕。
LC-50_60S50H_CT indd 20 2017/09/15 17:56:23
Page 22
21
網絡功能
連接到網絡
有線安裝準備
無線安裝準備
想要享受互联网服务，那么就需要用高速连接到互联
网的方式将电视机连接到路由器。
•
如果不具备寬頻互联网连接条件，那么请諮询您购买电视
机的商店或询问您的互联网服务供应商或电话公司。
•
播放串流媒体内容需要有稳定的连接速度，否则可能无法
正常观看。
開啟路由器（市面有售）电源，如下图所示用LAN接線
（市面有售）将电视机上的LAN端子连接到您的路由器
。
•
路由器的使用方法请参阅其使用说明书。
開啟路由器（市面有售）电源，如下图所示用无線方
式将电视机连接到您的路由器。
无線區域网路由器 / 接入点
電視機
网络
有線連接概覽圖
如何連接
LAN
LAN
•
本电视机具有以下认证。
–
Wi-Fi CERTIFIED™（Wi-Fi 联盟的认证手续）
•
並非在所有的居住环境下都能保证有无線區域网连接並保
证其性能。 在以下情况下，无線區域网信号可能很差或衰
落，或其连接速度可能变得较慢。
–
在混凝土、有加固钢筋、或金属结构的建筑物中使用时
–
放置在能阻隔信号的物体附近时
–
在与其他辐射相同频率的无線设备一起使用时
–
在微波炉和其他辐射磁场、靜電或电磁干扰的设备附近
使用时
•
请确认您的网络中的防火牆允许访问到电视机的无線连接。
•
当使用未经 Wi-Fi
®
認证的接入点时， 不能保证可正常运行。
•
在使用无線區域网时，需要有一个无線區域网接入点来将
电视机连接到互联网。 设置方法请参阅您的接入点的使用
说明书。
•
播放串流媒体内容需要稳定的连接速度。 如果无線區域网
的速度不稳定，那么请使用有線连接。
•
由於網絡上格式眾多，某些格式本電視機可能無法播放。
•
在转換到第三方或更改配置之前，请务必先进行无線區域
网设置的初始化。
LC-50_60S50H_CT indd 21 2017/09/15 17:56:23
Page 23
22
網絡功能
使用有線連接方式接入到網絡。
使用無線連接方式接入到網絡。
您可以手動添加一個不廣播的無線網絡。
根據螢幕提示輸入不廣播的無線網絡資訊後選擇“儲
存”，即可添加當前無線網絡。
將“是否啟用無線網絡連接”設置為“開”後，螢幕
顯示當前附近的無線網絡訊息。
如當前無線網絡連接安全性為不開放， 按下OK，調
出輸入法後輸入密碼。
有線網絡連接
無線網絡連接
自動連接
手動連接
添加網絡
系統會嘗試自動獲取 IP 位址等相關資訊。
根據頁面提示輸入對應的 IP 地址、 子網絡遮罩、預設
網關、 首選 DNS 服務器、備用 DNS 服務器。
網絡設置
選擇選項表的“設置”，然後按下
OK（輸入）
，按下
，選擇“網絡”選項，然後按下
OK（輸入）
，
螢幕顯示當前網絡訊息。
•
如果您想要在有線網絡和無線網絡之間替換使用時，需要
您每次手動打開選項表→網絡進行切換。
LC-50_60S50H_CT indd 22 2017/09/15 17:56:23
/
Page 24
/
/
23
在應用介面選擇“設置”選項，然後按下 OK。
1
2
按下 ，選擇“ 應用程式”， 然後按下 OK
（輸入）。按下 ，選擇您想要設置的項目，
然後按下 OK。
智能功能
智能電視搭載安卓平台，大量第三方應用程式隨心下
載使用。
按下
，顯示智能界面。
智能界面將電視節目、應用程式等整合其中，為您呈
現最直接方便的智能操作界面。
您可以在電視和應用等界面自由切換，按下OK（輸
入） 進入具體內容。
選擇一個輸入源（模擬電視、 數碼電視、HDMI1、
HDMI2、HDMI3、色差、AV），然後按下遙控器上
的OK（輸入）進入。
進入“應用商店”，選擇您想安裝的應用，根據螢幕
提示將應用安裝到電視上。
您可管理已經下載到電視的應用。
為您提供大量應用，給您更豐富更精彩的應用體驗。
在應用界面，您既可以直接體驗隨機安裝的應用，也
可以從應用商店下載更多的應用。
無法保證所有應用軟體能夠正確讀取產品資訊。
應用程式
安裝應用
應用界面
智能界面
電視界面
允許未知來源
我的應用
首選安裝位置
設置是否允許未知安全來源的應用。
顯示已安裝的應用列表， 可對應用“強制停止”、“卸
載”、“清除緩存”或“移至 SD卡/ 移至內部儲存”。
設置首選安裝位置， 可選擇“預設”、 “內置儲存”和“外
置儲存”。
內置儲存空間
顯示SD卡儲存空間
可查看電視內部未使用和總存儲空間。
可查看 SD 卡內未使用和總存儲空間。
•
在使用兒童模式應用時，如忘記密碼，請在密碼輸入畫面
中輸入“3001”後進入，重置密碼後進行其它操作。
SD卡格式化
SD卡安全卸載
格式化 SD/SDHC 卡槽中的存儲卡。
請在 出 SD/SDHC 卡槽中的存儲卡之前，進行安全
卸載操作。
•
選擇 SD 卡格式化將導致當前存儲或安裝在 SD 卡上的內
容被完全刪除，已經刪除的內容或應用不可恢復，請謹慎
操作。
•
記憶卡不得執行熱插 操作，否則可能會令電視機故障。
•
記憶卡需要在安全移除或關閉電視機後才可取下。
•
請時常為記憶卡內的資料備份，防止資料損壞或電視機運
作錯
。（若有任何儲存資料損壞或遺失，SHARP 不負責）
在需要輸入字元時，按下OK（輸入），虛擬鍵盤就會
顯示在螢幕上。
在應用界面，選擇“瀏覽器”，然後按下OK（輸入）
即可進入。您也可以按下遙控器上的
（瀏覽器），
快速進入瀏覽器界面。
提供虛擬鍵盤輸入模式。輸入過程中，您可根據螢幕
提示游標選擇字母，按下
OK
（輸入）後則完成字元輸
入。同時可根據虛擬鍵盤的提示來切換中文輸入、英
文輸入和數位輸入等模式。
輸入文字
瀏覽器
LC-50_60S50H_CT indd 23 2017/09/15 17:56:23
•
瀏覽器可以被卸載，瀏覽器被卸載後，按下 無法打開瀏
覽器。
Page 25
24
其他有用功能
•
USB 1和USB 2 端子不可同時連接硬碟驅動器。
•
在連接 USB 硬碟驅動器時，請務必使用具有交流電
源適配器的硬碟驅動器。
•
正在傳輸文件時，請勿從電視機上卸下存儲設備。
•
請勿將 USB 存儲設備 /USB 硬碟驅動器反覆插入和
從電視機上 出。
•
在使用讀卡器時，請務必在使用讀卡器之前先插入
存儲卡。
•
電視機可能會無法識別讀卡器。
•
當電視正在播放 USB 設備中的數據時，請遵守以下
事項：
—
請勿關閉電視機。
—
請勿斷開 USB 電線連接。
— 請勿 出、移動 USB 設備，如需 出請先退出
USB 界面，否則可能造成數據丟失，USB 設備
損壞或電視系統故障無法正常運行。
•
當連接 USB 集線器時，電視機可能不能夠識別所有
的 USB 存儲設備。
可將 USB 存儲設備或 USB 硬碟驅動器連接到電視機
來觀賞相片、聆聽音樂並觀看影片。
將記錄著相片、音樂或影片的 USB 存儲設備插入到電
視機上的 USB 1 或 USB 2 端子。
•
由於 USB 存儲設備各有不同，電視機可能不能夠識別所記
錄的數據。
•
如果 USB 存儲設備中存儲了許多文件或文件夾，那麼讀取
所記錄的數據可能需要花費相當長的時間。
•
有可能不支援某些視頻文件中的外掛字幕。
•
請勿使用 USB 延長連接線將 USB 存儲設備連接到電視機
的 USB 端子上，否則可能會妨礙電視機正常工作。
•
請打開電視機後再插入 USB 存儲設備。
按下遙控器上的 進入智能界面，按下 /
，切換至應用界面，選擇“SHARP 媒體庫”，
然後按下
OK（輸入）
進入。
1
按下 ，選擇您要進入的設備或驅動
器。
2
觀看相片、影片時按 （選項表）可顯
示 USB 多媒體選項表畫面。
通過按 選擇相關功能， 然後按
OK （
輸
入）進行操作。
詳細功能與其適用的模式請參閱第 25 頁的表
格。
4
3
按下 ，選擇所需的文件、相片、音
樂或影片，然後按下
OK（輸入）
。選擇您想要
播放的文件，然後按下
OK（輸入）
，即可播放
當前文件。
•
按下遙控器上的
( 返回 ) 鍵，可以進入上一層
文件夾。
連接 USB 存儲設備
播放 USB 存儲設備中的檔案
LC-50_60S50H_CT indd 24 2017/09/15 17:56:23
/ //
/ //
/
Page 26
25
用於USB多媒體選項表操作的按鈕
按鈕/選項表 說明 影片模式 音樂模式 相片模式
/ 播放/ 暫停。 -
轉至上一個文件。 - 轉至下一個文件。 - 循環播放。
每次按下
OK(輸入)
在“順序播放”、“循環播放所有”、
“單曲播放”、“循環播放單曲”、“隨機播放”之間切
換。
- -
播放列表。
顯示播放列表，可以從播放列表中選擇播放文件。
- -
縮放
按
CH
切換相片大小，按 鍵移動。 - -
旋轉
旋轉相片
按 逆時針旋轉；按 順時針旋轉；
按
(返回)
鍵退出。
- -
幻燈片
幻燈片播放選項
選擇幻燈片播放時的間隔時間、切換模式。
- -
電視設置
設置電視選項
字幕選項
視頻播放時設置字幕
可進行字幕顯示、字幕選擇、字幕切換、字幕搜索、字幕
高級設定的設置。
- -
音頻選項
視頻播放時選擇音軌。 - -
跳越時間
指定播放起點
從輸入的時間開始播放。
- -
高級選項
播放設置
視頻播放時：設置中斷點播放、快進快退、單循環。
- -
按
OK(輸入)
鍵播放上一個文件。 - -
按
OK(輸入)
鍵播放下一個文件。 - 快進 按 鍵鍵快進。 快退 按 鍵鍵快退。 -
播放上一個文件。 - 播放下一個文件。 - -
其他有用功能
LC-50_60S50H_CT indd 25 2017/09/15 17:56:23
/ //
/
/
/
Page 27
26
其他有用功能
與 USB 模式相容的檔案列表
支援的視頻格式
LC-50_60S50H_CT indd 26 2017/09/15 17:56:23
文件擴展名 視頻編碼 音頻編碼 字幕
avi
MPEG2 MP@HL
MPEG4 SP＠L0-3,ASP＠L-05
MPEG4 ASP(GMC 0,1p)
H.264 HP@Up to Level 4.0
H.264 MP@L 4.0
H.265(HEVC) Main Profile @
Up to Level 5 (4k2k 30 fps)
MPEG4 ASP＠Level 5
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
H.264 (AVC) MP@L 4.1
PCM
AC3
WMA,WMA Pro
MP3
AAC,support MPEG2 AAC(AAC-LC) &
MPEG4 AAC-LC
HE-AAC,support MPEG4 HE-AAC v2
MPEG Audio,support MPEG1 Layer 1/2
Dolby Digital Plus
Dolby Digital
DTS
外部：
MicroDVD
SRT
SSA
ASS
Subview
Vobsub
内部：
Vobsub
mkv
MPEG1 MP
MPEG2 MP@HL
MPEG-4 SP@HL 3.0 & MPEG-4 ASP@HL 4.0
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
H.265(HEVC) High/Main Profile @
Up to Level 5 (4k2k 30 fps)
MPEG1
MPEG4 SP
MPEG4 ASP @Level 5
H.264 (AVC) MP@L 4.1
AAC(AAC-LC)(H 264)
AC3
Dolby Digital Plus
Dolby Digital
DTS
外部：
MicroDVD
SRT
SSA
ASS
Subview
Vobsub
内部：
SSA
ASS
SRT
Vobsub
ts
MPEG2 MP@HL
H.264 High profile to level 5.1
H.264 Main profile to level 4.1
H.264 baseline profile to level 4.0
H.264 HP@Up to Level 4.1
H.264(AVC) MP@L4.1
H.264(AVC) BP@L3.1
H.265(HEVC) Main Profile @
Up to Level 5 (4k2k 30 fps)
MPEG Audio,support MPEG1 Layer 1/2 &
MP3(MPEG2)
LPCM
Dolby Digital Plus
Dolby Digital
AC3
MP3
DTS
AAC
-
trp
MPEG2 MP@HL
H.264 HP@Up to Level 4.1
H.264(AVC) MP@L4.1
MP3 -
tp MPEG2 MP@HL MP3 -
m2ts
MPEG2 MP@HL
H.264(AVC) MP@L4.0
H.264(AVC) BP@L4.0
H.265(HEVC) Main Profile @
Up to Level 5 (4k2k 30 fps)
AC3
AAC
Dolby Digital
-
vob
mpeg
MPEG1
MPEG2 MP@HL
LPCM
Dolby Digital
Dolby Digital Plus
-
dat
MPEG1
MPEG2
MP3 -
mov
MPEG4
SP
MPEG2 MP@HL
MJEPG
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
Dolby Digital Plus
Dolby Digital
-
flv
H.264 HP10 LV 4.0
H.264 MP10 LV 4.0
H.264 BP LV 4.0 (**2)
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
MPEG4 SP
MPEG4 ASP@Level 5
H.264(AVC) MP@L4.1
MPEG4 AAC-LC
MPEG1 Layer 1/2
外部：
MicroDVD
SRT
SSA
ASS
Subview
Vobsub
Page 28
27
其他有用功能
LC-50_60S50H_CT indd 27 2017/09/15 17:56:23
•
USB 1.1 設備中的文件可能無法正確播放
。
•
不保證可以使用 USB 集線器
。
•
可能無法正確播放高於 1280x720 的 Motion jpeg 視頻
。
•
上述列表中某些文件格式可能無法正常播放（包括圖像、
聲音、字幕等）
。
•
視比特率而定，某些文件可能無法播放
。
•
支援的是 DTS 編碼的視頻文件，並不是 DTS 環繞聲
。
•
某些字幕可能無法正確顯示，並可能影響電視機的正常運
作
。
•
僅顯示相容的文件格式
。
•
根據文件不同，顯示的播放時間可能會與實際播放時間稍
有不同
。
•
部分文件時間長度資訊可能無法正確顯示
。
支援的音頻格式 支援的圖片格式
文件擴展名 視頻編碼 音頻編碼 字幕
mp4
MPEG2 MP@HL
MPEG4 SP
MPEG4 ASP＠Level 5
MPEG-4 SP@HL 3.0 & MPEG-4 ASP@HL 4.0
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
H.264(AVC) MP@L4.0
H.264(AVC) BP@L4.0
H.265(HEVC) Main Profile @
Up to Level 5 (4k2k 30 fps)
MPEG1 Layer 1/2
Dolby Digital Plus
Dolby Digital
MPEG4 (AAC)
AAC
HE-AAC (AAC+)
HE-AAC v2 (enhanced AAC+)
MPEG4 (Enhanced Low Delay AAC)
外部：
MicroDVD
SRT
SSA
ASS
Subview
Vobsub
3gp
MPEG2 MP@HL
MPEG-4 SP@HL 3.0 & MPEG-4 ASP@HL 5.0
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
H.264(AVC) MP@L4.0
H.264(AVC) BP@L4.0
H.263
MPEG1 Layer 1/2
AMR_NB
AAC
外部：
MicroDVD
SRT
SSA
ASS
Subview
Vobsub
rmvb Real Video 8, 9, 10 - -
webm VP8 - -
DTMB
AVS:Full-HD 60P decoderJizhun profile @
Level 6.2 (supports 4:2:0 format),Full-HD 60P
decoder
MPEG2 MP@HL
H.264 HP@Up to Level 5.1
H.264(AVC) MP@L4.0
H.264(AVC) BP@L4.0
Dolby Digital Plus
Dolby Digital
MPEG1 Layer 1/2 (MPEG2)
MPEG2 (AAC-LC)
(H.264) & MPEG4 AAC-LC (H.264)
DRA(解码)
-
文件擴展名 音頻編碼
.mp3 MPEG1 Layer 1/2/3
.wma WMA、 WMAPro、WMA V9
.flac flac
.ogg VORBIS
.wav WAVE、PCM
.mka AC3
.aac AAC
.m4a AAC
.mid MIDI
文件擴展名 圖片編碼
JPEG
progressive 4000*4000
baseline 8000*8000
PNG 4096*5760
GIF 8000*8000
BMP 8000*8000
Page 29
28
故障分析
下述問題並非一定由於故障而引起。在請人修理電視機之前，請再次檢查電視機。
附錄
故障 可能的解決方案
•
沒有電源。
•
交流電源線是否沒有連接？（請參閱第 11 頁。）
•
主電源是否被開啟？（請參閱第 15 頁。）
•
若電源開關不起作用，請 出電源插頭然後再將電源插頭插入，等待 5 秒鐘以上，
然後再按下電視機上的
（POWER）。
•
不能操作本機。
•
外來的影響，例如閃電、靜電等等，都可能導致不能正常運行。在這種情況下，請
先關閉電視機的電源，或 出交流電源線並等待 1 到 2 分鐘之後再重新插入，然後
再操作電視機。
•
遙控器不起作用。
•
電池是否按極性 (+、-) 對齊了裝入？（請參閱第 14 頁。）
•
電池是否已經電量耗盡？（更換新的電池。）
•
是否在強光或營光燈下使用？
•
是否有營光燈照射到遙控器感應器上？
•
畫面被切斷。
•
螢幕模式調校（例如影像尺寸）是否正確？（請參閱第 18 頁。）
•
奇怪的顏色、色
淺淡、色調
昏暗、或色
不能對準。
•
調校影像色調。（請參閱第 18 頁。）
•
房間是否太亮？在特別明亮的房間裏畫面可能看起來比較暗淡。
•
檢查
色制式的設置。（請參閱第 20 頁。）
•
電源突然關閉。
•
機器內部的溫度升高。
移開擋住通風口的物體，或是清潔通風口。
•
是否設置了定時關機、無訊號自動關機？（請參閱第 17 頁。）
•
沒有影像。
•
與其外部設備之間的連接是否正確？（請參閱第 12 頁、第 13 頁和第 24 頁。）
•
是否選擇了正確的輸入？（請參閱第 23 頁。）
•
影像調整是否正確？（請參閱第 18 頁。）
•
天線是否正確地連接好了？（請參閱第 11 頁。）
•
檢查
色制式的設置。（請參閱第 20 頁。）
•
沒有聲音。
•
音量是否太低？（請參閱第 10 頁。）
•
檢查聲音制式的設置。（請參閱第 20 頁。）
•
電視機有時會發出破裂聲。
•
這並非故障。由於溫度變化，機殼會有輕微的熱脹冷縮，此時可能發出聲響。這並
不影響電視機的性能。
•
無法選擇想要的頻道。
•
切換數碼電視和模擬電視模式。（請參閱第 23 頁。）
•
無法連接網絡。
•
LAN 連線是否正確連接。（請參閱第 21 頁和第 22 頁。）
•
請確認“網絡設置”的設定。
在高溫和低溫環境下使用的注意事項
•
當機器在低溫空間使用時 （例如房間、辦公室），影像可能會出現拖尾或是出現少許延遲。這並不是故障，當溫度恢復正
常時，本機的顯示也會恢復正常。
•
勿將本機置於很熱或很冷的地方。也不要將本機置於受到陽光直接照射或接近熱源的地方，否則可能會引致外殼變形，
並導致液晶顯示屏發生故障。
儲藏溫度為 -20° C 至 +60° C。
LC-50_60S50H_CT indd 28 2017/09/15 17:56:23
Page 30
29
附錄
規格
項目
型號
LC-50S50H LC-60S50H
解像度 8,294,400 像素（3840(H) X 2160(V)）
視頻
色制式
PAL / SECAM / NTSC 3.58 / NTSC 4.43 / PAL 60
電視標準
電視制式
模擬
PAL:BG, DK, I SECAM:BG, DK NTSC:MN
數碼
DTMB
接收頻道
VHF
/
UHF
44.25MHz-863.25 MHz
CATV
S1-S41
頻道（包括超頻段）
數碼地面廣播
52.50MHz-866.00MHz
立體聲/雙語 麗音 : BG, I, DK ; A2 立體聲 : BG
電視調諧系統
模擬 自動預設 99 個頻道
數碼 自動預設 999 個頻道
音頻輸出功率 10W( 左/右揚聲器 )
揚聲器 (30 mm x 15mm; ) x 2
端子
側面
USB1
USB 2.0
SD 卡槽 SD/SDHC
USB2
USB 3.0
HDMI 1
HDMI (HDMI輸入) (480i, 576i, 480p, 576p, 720p/50Hz, 720p/60Hz, 1080i/50Hz,
1080i/60Hz, 1080p/50Hz, 1080p/60Hz, 1080p/24Hz, 2160p/30Hz)
HDMI 2
HDMI (HDMI輸入) (480i, 576i, 480p, 576p, 720p/50Hz, 720p/60Hz, 1080i/50Hz,
1080i/60Hz, 1080p/50Hz, 1080p/60Hz, 1080p/24Hz, 2160p/30Hz)
天線 UHF/VHF 75 Ω DIN 型插座
HDMI 3
HDMI (HDMI輸入) (480i, 576i, 480p, 576p, 720p/50Hz, 720p/60Hz, 1080i/50Hz,
1080i/60Hz, 1080p/50Hz, 1080p/60Hz, 1080p/24Hz, 2160p/30Hz,2160p/50Hz,
2160p/60Hz)
後面
數碼音頻輸出 光纖數碼音頻輸出
服務專用端子 僅用於服務
色差 / 影音輸入
色差輸入 (480i, 576i, 480p, 576p, 720p/50Hz, 720p/60Hz, 1080i/50Hz,
1080i/60Hz)， 音頻輸入；視頻輸入，音頻輸入
LAN（區域網絡） 網絡插座
屏幕顯示的語言 英文/ 中文（簡體）/ 中文（繁體）
電源要求 交流 110-240 V，50Hz
整機消耗功率（備用） 130W (0.5W) 190W (0.5W)
重量
不包括底座 14.0 kg 21.0 kg
包括底座 15.0 kg 22.0 kg
操作温度 0 °C 至 +45 °C
•
作為不斷改進產品性能的方針之一，SHARP 公司保留為改進產品而改變設計與規格不需事先通知的權利。
LC-50_60S50H_CT indd 29 2017/09/15 17:56:23
Φ60mm
(30 mm x 15mm; ) x 2
Φ60mm
Page 31
30
輪廓圖
附錄
LC-50_60S50H_CT indd 30 2017/09/15 17:56:23
單位 ：毫米
*1 有效區域
*2 最薄的部份
LC-50S50H
LC-60S50H
1331
748
Page 32
1
Dear SHARP customer
Contents
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
OPERATION MANUAL
Introduction
Dear SHARP customer ................................................................................................................. 1
Contents ......................................................................................................................................... 1
Precautions for daily use .............................................................................................................. 3
Important safety precautions ....................................................................................................... 4
Trademarks .................................................................................................................................... 5
Accessories ................................................................................................................................... 6
Preparation
Attaching the stand unit ............................................................................................................... 7
Handling and precautions with the wall-mounted TV ............................................................... 8
Part names ..................................................................................................................................... 8
TV (Front) ......................................................................................................................... 8
TV (Rear) .......................................................................................................................... 9
Remote control unit ....................................................................................................... 10
The operation button ..................................................................................................... 10
Before turning on the power ...................................................................................................... 11
Connecting external devices ..................................................................................................... 12
Using digital audio output .......................................................................................................... 13
Inserting a SD/SDHC memory card (commercially available) ................................................ 13
Connecting a USB memory device ............................................................................................ 13
Connecting to the Network ........................................................................................................ 13
Inserting the batteries ................................................................................................................ 14
Using the remote control unit .................................................................................................... 14
Cautions regarding the remote control unit ................................................................... 14
Turning the TV on/off .................................................................................................................. 15
Running the TV for the first time .................................................................................... 15
Turning off the TV .......................................................................................................... 15
User Guide ................................................................................................................................... 15
Watching TV
MENU ........................................................................................................................................... 16
MPX ............................................................................................................................... 16
Audio Language ............................................................................................................. 16
Subtitle Language .......................................................................................................... 16
Back ............................................................................................................................... 16
Info ................................................................................................................................. 16
EPG ................................................................................................................................ 16
Program List .................................................................................................................. 16
Program Edit .................................................................................................................. 17
Numeric Pad .................................................................................................................. 17
HDMI Select ................................................................................................................... 17
Settings .......................................................................................................................... 17
General ............................................................................................................ 17
Skin setting ........................................................................................ 17
Booting state ..................................................................................... 17
Language ........................................................................................... 17
Default input method ......................................................................... 17
Quick start ......................................................................................... 17
No signal power off ............................................................................ 17
Sleep timer ......................................................................................... 17
LC-50_60S50H_EN.indd 1 2017/09/15 18:09:38
Page 33
2
Contents
Watching TV (Continued)
Video ............................................................................................................... 18
AV mode ............................................................................................ 18
Contrast/Brightness/Tint/Sharpness/Colour/Backlight/Gamma setting ....
18
Colour temp. (Colour temperature) .................................................... 18
Wide mode......................................................................................... 18
DNR ................................................................................................... 18
Fine Motion(For LC-50S50H Only) ..................................................... 18
Active contrast ................................................................................... 18
Reset .................................................................................................. 18
Audio ............................................................................................................... 19
AV mode ............................................................................................ 19
Auto volume ....................................................................................... 19
Bass/Treble/Balance ......................................................................... 19
Surround sound ................................................................................ 19
Digital audio output ........................................................................... 19
Reset .................................................................................................. 19
Channel ........................................................................................................... 19
Auto search ........................................................................................ 19
Digital setting ..................................................................................... 19
Analogue setting ................................................................................ 19
Program edit ...................................................................................... 20
Network .......................................................................................................... 20
Apps ................................................................................................................ 20
Option ............................................................................................................. 20
Digital audio language ....................................................................... 20
Subtitle ............................................................................................... 20
For hearing impaired .......................................................................... 20
System ............................................................................................................ 20
System info ........................................................................................ 20
Legal info ........................................................................................... 20
Local update ...................................................................................... 20
System recovery ................................................................................ 20
Network function
Connecting to the Network ........................................................................................................ 21
Wired installation ........................................................................................................... 21
Wireless installation ....................................................................................................... 21
Network setting ........................................................................................................................... 22
Ethernet network connection ......................................................................................... 22
Wireless network connection ......................................................................................... 22
Smart function
Smart home ................................................................................................................................. 23
TV
...................................................................................................................................
23
APP
..................................................................................................................................
23
Installing Apps ................................................................................................ 23
Apps ............................................................................................................... 23
Text input
.......................................................................................................................................
23
Browser
..........................................................................................................................................
23
Other useful features
Connecting a USB memory device ............................................................................................ 24
Playing back files on a USB memory device
.............................................................................. 24
Buttons for USB media operation ............................................................................................. 25
List of file formats compatible with USB mode
......................................................................... 26
Appendix
Troubleshooting .......................................................................................................................... 28
Specifications .............................................................................................................................. 29
Dimensional drawings ................................................................................................................ 30
LC-50_60S50H_EN.indd 2 2017/09/15 18:09:38
Page 34
3
Observe the following items
Precautions for daily use
LC-50_60S50H_EN.indd 3 2017/09/15 18:09:38
Maintenance of the cabinet
•
When cleaning the cabinet, use a soft cloth (made of cotton, floss, etc.) to clean gently.
Do not use a dry or damp rag mixed with chemicals, as this could cause the ingredients of the cabinet body to deteriorate or crack.
• Be careful not to use an abrasive cloth for cleaning or clean with excessive force, as this could scratch the surface of the cabinet.
• If the cabinet is greatly soiled, clean with a soft cloth (made of cotton, floss, etc.) soaked with a small amount of diluted neutral
detergent and wrung out, and then clean with a soft dry cloth.
• Because the cabinet is made of plastic, solvents such as benzene, alcohol or thinner could cause it to deteriorate, or make its
coating come off. Therefore do not use such solvents to clean the cabinet.
• Because plasticizer is included in the plastics, deterioration or the coating peeling off could occur when the cabinet comes into
contact with some substances. Therefore keep it away from volatile substances such as insecticide. In addition, do not let it come
into contact with objects made of rubber, resin, etc. for a long time.
Maintenance of the LCD panel
• Before cleaning the LCD panel, be sure to turn off the TV set and unplug the power cord from the outlet.
• When cleaning the LCD panel, use a dry and soft cloth (made of cotton, floss, etc.) to clean the surface of the LCD panel gently.For
protecting the LCD panel, do not clean with a dirty cloth, detergent, or a dry or damp rag mixed with chemicals, as this could cause
peeling of the panel surface.
• Be careful not to clean with an abrasive cloth or with excessive force, as this could cause the panel surface to be scratched.
• If the LCD panel is greatly soiled, clean it gently with a soft cloth (made of cotton,floss, etc.) soaked with a small amount of water(Do
not clean with excessive force, so as to avoid the scratch of the panel surface).
• If dust sticks on the surface of the LCD panel, clean the panel with a commercially available cleaning brush (anti-static brush).
Page 35
4
LC-50_60S50H_EN.indd 4 2017/09/15 18:09:38
Important safety precautions
• Water and moisture — Do not use the
product near water, such as bathtub,
washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled
eht ecalp ton oD .tcudorp siht no sreniatnoc
product under air conditioner,humidifier
and so on. The water may spill onto the
product causing fire or electric shock.
• Stand — Do not place the product on
an unstable cart, stand, tripod or table.
Doing so can cause the product to fall,
resulting in serious personal injuries as
well as damage to the product. Use only
a cart, stand, tripod, bracket or table
recommended by the manufacturer or
sold with the product. When mounting the
product on a wall, be sure to follow the
manufacturer’s instructions. Use only the
mounting hardware recommended by the
manufacturer.
• When relocating the product placed on a
cart, it must be moved with utmost care.
Sudden stops, excessive force and uneven
floor surface can cause the product to fall
from the cart.
• Ventilation — The vents and other openings
in the cabinet are designed for ventilation.
Do not cover or block these vents and
openings since insufficient ventilation can
cause overheating and/or shorten the life
of the product. Do not place the product
on a bed, sofa, rug or other similar surface,
since they can block ventilation openings.
This product is not designed for built-in
installation; do not place the product in
an enclosed place such as a bookcase or
rack, unless proper ventilation is provided
or the manufacturer’s instructions are
followed.
• The LCD panel used in this product is made
of glass. Therefore, it can break when the
product is struck forcefully or with a sharp
object. If the LCD panel is broken, be careful
not to be injured by broken glass.
• Heat sources — Keep the product away
from heat sources such as radiators,
heaters, stoves and other heat-generating
products (including amplifiers)
• To prevent fire never place any type of
candle or naked flames on the top or near
the TV set.
• To prevent fire or shock hazard, do not
place the AC power cord under the TV set
or other heavy items.
• Do not place heavy objects on this
product or stand on it. Doing so
could cause injury if the product
overturns. Take special care near
children and pets.
The LCD panel is a very high technology product with
8,294,400 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few
non-active pixels may appear on the screen as a fixed
point of blue, green or red.
This is within product specifications and does not
constitute a fault.
• Do not display a still picture for a long time, as this could cause
an afterimage to remain.
• Install the product on the place where the AC cord can be
unplugged easily from the AC outlet.
Precautions when transporting the
TV
• When transporting the TV, never carry it by
holding or otherwise putting pressure onto
the display.
Be sure to always carry the TV by at least
two people holding it with two hands — one
hand on each side of the TV.
• In case the product is dropped and the
cabinet is damaged, be sure to turn off
the power of the product, and unplug
the power cord. If you continue to use
the product, it may cause fire or electric
shock.
• Do not open the rear cover of the cabinet
to reconstruct the circuits. There exists high
voltage within the cabinet and it may cause
electric shock and injury. If maintenance is
required, contact your dealer.
• Unplug the power cord before you move
the TV set. If not unplugged beforehand,
the power cord may become damaged and
cause electric shock.
NOTE
• The above are pictures for reference only; the actual item might be
different.
• Cleaning — Unplug the AC cord from the
AC outlet before cleaning the product.
Use a damp cloth to clean the product.
Do not use alcohol cleaners, spray
cleaners or chemical cloth when cleaning
because these types of materials may
damage the product.
Page 36
5
LC-50_60S50H_EN.indd 5 2017/09/15 18:09:38
Trademarks
• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
• SDHC logo is a trademark of SD-3C,LLC.
• MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
• Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from
Dolby Laboratories. Confidential unpublished works. Copyright 1992-2015 Dolby Laboratories. All rights reserved.
• **For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and
the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries ©
DTS, Inc. All Rights Reserved.
• The operation manual has been collated and checked strictly. Due to factors such as software upgrading,SHARP can not
guarantee that the actual operation keeps pace with the manual description.
DISCLAIMERS
• This SHARP device facilitates the access to content and services provided by third parties. The content and services
accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party
content and services must be in accordance with any authorization or terms of use provided by such content or service
provider. SHARP shall not be liable to you or any third party for your failure to abide by such authorization or terms of
use. Unless otherwise authorized by the applicable content or service provider, all third party content and
services provided are for personal and non-commercial use; you may not modify, copy, distribute, transmit, display,
perform, reproduce, upload, publish, license, create derivative works from, transfer or sell in any manner or medium any
content or services available via this device.
• SHARP is not responsible, nor liable, for customer service-related issues related to the third party content or services.
Any questions, comments or service-related inquiries relating to the third party content or service should be made
directly to the applicable content or service provider.
• You may not be able to access content or services from the device for a variety of reasons which may be unrelated to
the device itself, including, but not limited to, power failure, other Internet connection, or failure to your device
properly. SHARP, its directors, employees, agents, contractors and shall not be liable to you or any
third party with respect to such failures or maintenance outages, regardless of cause or whether or not it could have been
avoided.
• All third party content or services accessible via this device is provided to you on an “as-is” and “as available”
basis and SHARP and its make no warranty or representation of any kind to you, either express or implied,
including, without limitation, any warranties of merchantability, non-infringement, for a particular purpose or any
warranties of suitability, availability, accuracy, completeness, security, title, usefulness, lack of negligence or error-free
or uninterrupted operation or use of the content or services provided to you or that the content or services will meet your
requirements or expectations.
• SHARP is not an agent of and assumes no responsibility for the acts or omissions of third party content or service
providers, nor any aspect of the content or service related to such third party providers.
• In no event will SHARP and/or its be liable to you or any third party for any direct, indirect, special, incidental,
punitive, consequential or other damages, whether the theory of liability is based on contract, tort, negligence, breach of
warranty, strict liability or otherwise and whether or not SHARP and/or its have been advised of the possibility
of such damages.
• THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A
CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
• THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND
COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Page 37
Accessories
6
Supplied accessories
Screws
(x4)
Make sure the following accessories are provided with the product.
Remote control unit “AAA” size battery (x2)
Operation manual
Used with batteries inserted.
Page 10 Page 14
Stand unit
Page 7
Stand Unit
(x2)
“R”
“L”
LC-50_60S50H_EN.indd 6 2017/09/15 18:09:38
Page 38
7
Preparation
• When
you attach the stand unit, put the TV on a flat surface.
• Before
attaching (or detaching) the stand unit, unplug the AC power cord from the AC power outlet.
• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
•
Attach the stand unit in the correct direction.
•
Be sure to follow the instructions. Incorrect installation of the stand unit may result in the TV fallingover.
Attaching the stand unit
NOTE
•
When installing the stand unit, you need to put your TV on a
flat surface. Before that, put a soft cushion on the surface.
•
To detach the stand unit, perform the steps in reverse
order.
•
The angle of the stand unit is not adjustable.
•
A screwdriver is not supplied with this product.
•
During installation, please be careful to avoid getting your
hand trapped between the TV bottom and the floor.
Place the TV on a flat surface with soft cushion
on top of it. Insert the stand unit into the slot
on the bottom of the TV while holding the
stand unit to avoid it falling over.
1
2
Screws
Insert the four screws into the four holes on
the back of the TV, and tighten them.
LC-50_60S50H_EN.indd 7 2017/09/15 18:09:38
Soft cushion
“L
“R”
Page 39
8
Part names
• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from
the actual operations.
• The illustrations used throughout this operation manual are based on LC-50S50H.
TV (Front)
Handling and precautions with the wall-mounted TV
• You can mount the TV on the wall using the optional bracket.
• For details, refer to the instructions supplied with the optional bracket.
CAUTION
• This TV should be mounted on a wall only with a wall mount bracket recommended by SHARP. The use of other wall
mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skills that should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using a SHARP recommended bracket to mount the TV
• You
can ask a qualified service professional about using a SHARP recommended bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Preparation
Power indicator
Remote control sensor
LC-50_60S50H_EN.indd 8 2017/09/15 18:09:38
Page 40
9
Preparation
TV (Rear)
LC-50_60S50H_EN.indd 9 2017/09/15 18:09:38
Antenna terminal
(ATV/DTV)
HDMI 1 terminal
USB 2 terminal
USB 1 terminal
SD/SDHC card slot
COMPONENT /AV input terminal
LAN terminal
HDMI 2 terminal
HDMI 3 terminal
DIGITAL AUDIO
OUTPUT terminal
For service
terminal
Operation button
Page 41
10
Preparation
Remote control unit
1 (POWER (Standby/On))
To switch the power on and off. (See page 15.)
2
(HOME)
Display the smart home.
3
(PREVIOUS)
Press to the previous page of smart home.
4 (Cursor)
Select a desired item on the setting screen.
5 OK
Execute a command.
6 VOL+/
-
Set the volume.
7
(MENU)
Display the menu list.
8
(NEXT)
Press to the next page of smart home.
9
(RETURN)
Return to the previous menu screen.
10 CH
TV input mode: Select the channel.
11
(BROWSER)
Start browser.
11
8
7
10
9
1
5
6
2
4
3
You can also setup the TV through the operation
button at the TV back. (The position of the operation
button, please see page 9)
The operation button
Action Description
Short press Turn on the TV.
Left/Right Set the volume reduction/add.
Up/Down Set the channel up/down.
Long press Display the menu( Power off )when the TV
is switched on.
LC-50_60S50H_EN.indd 10 2017/09/15 18:09:38
/ //
/
Page 42
11
Preparation
1
Before turning on the power
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
• If there are any protective plastic sheets on the TV cabinet, please take them off before connecting.
Plug the AC cord into the AC outlet.
• Place
the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
TV (rear view)
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Standard
DIN45325 plug
(IEC169-2)
75-ohm coaxial
cable (round cable)
Room antenna terminal
(75-ohm type)
Antenna cable
(commercially available)
Connecting external devices
See page 12 and 13 for connecting external equipment, such as a VCR and DVD player.
2
3
4
To antenna terminal
AC cord
AC outlet
CAUTION
•
To prevent risk of electric shock , do not touch un-insulated parts of any cables with the AC cord connected.
Bundling the cables
As the picture illustrated, insert the cable clip into the hole on the TV, and put the cable into the cable clip
for banding.
LC-50_60S50H_EN.indd 11 2017/09/15 18:09:38
Page 43
Preparation
12
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV Set Top Box (STB), PC or other external equipment.
• Refer to the relevant operation manual (Digital TV Set Top Box (STB), VCR, DVD player, etc.) carefully before making
connections.
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, Digital TV Set Top Box (STB), game
console, camcorder, DVD player and PC. To view external source images, press
(HOME) to the smart home
interface, press
/
to switch to the TV, select the input source and then press OK.
When using component cable* (commercially available)
When using AV cable* (commercially available)
When using HDMI cable (commercially available)
Digital TV STB/VCR/Game
console/Camcorder/DVD
Player/PC
Digital TV STB/VCR/
Game console/
Camcorder/DVD Player
Digital TV STB/VCR/
Game console/
Camcorder/DVD
Player
NOTE
• When using a TV set-top box to watch TV programs, use the set-top box remote control to switch channels.
NOTE
• Insert the terminals by colour.
NOTE
• Insert the terminals by colour.
R– AUDIO – L
YP
BPR
Y(Green)
Audio-R(Red)Audio-L(White)
P
R
(Red)
P
B
(Blue)
Audio-R(Red)
Video(Yellow)
Audio-L(White)
*
The component and AV input share the same terminal.
*
The component and AV input share the same terminal.
LC-50_60S50H_EN.indd 12 2017/09/15 18:09:38
Page 44
13
Preparation
Using digital audio output
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. PCM or RAW (Dolby or DTS Digital
audio) outputs from the terminal.
Connecting a USB memory device
See page 24.
Connecting to the Network
See page 21 to 22.
NOTE
• Insert the memory card into the slot in the direction shown in the figure.
• The SD slot supports SD and typeSDHC memory cards. However some memory cards may not be supported.
• This product supports memory cards with a maximum storage of 32 GB. We recommend that you use a memory card with at
least a speed of Class 4 for a higher read-write speed, thus guaranteeing the system performance.
• Unplug the memory card after you have safely unloaded it or the TV has been turned off.
• Do not unplug the memory card while data is being transferred. Otherwise the TV may malfunction.
• Regularly back up data in the memory card to prevent data corruption or operating errors of the TV. (SHARP shall not bear
any responsibility for data corruption or destruction.)
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. (The audio of the content you are
viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software.
Inserting a SD/SDHC memory card (commercially available)
It provides access to Apps ,video,music,andother files in SD/SDHC memory cards.
Insert a SD/SDHC memory card that stores your files into the SD slot. Refer to the method of playing
files
stored in
the USB device on page 24 for details.
To optical digital input
of external audio
devices.
LC-50_60S50H_EN.indd 13 2017/09/15 18:09:38
specified
Page 45
14
Preparation
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
• Batteries shall not be exposed to excessive heat such as sunshine, orfire the like.
1
Open the battery cover. 2 Insert the two supplied “AAA”
size batteries.
3
Close the battery cover.
Cautions regarding the remote control unit
• Do not subject the remote control unit to shock.
In addition, do not soak the remote control unit with liquids or place it in
an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor
window of the TV is under direct sunlight or strong lighting. In such
cases, change the angle of the lighting or TV, or operate the remote
control unit closer to the remote sensor window.
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
Use the remote control unit by pointing it towards the
remote sensor window.
Objects between the remote control unit and sensor
window may prevent proper operation.
Using the remote control unit
Remote control sensor
5 meters
• Place batteries with their terminals
corresponding to the (+) and
(-) indications in the battery
compartment.
LC-50_60S50H_EN.indd 14 2017/09/15 18:09:38
find
Page 46
15
Preparation
Turning the TV on/off
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• A small amount of electric power is still consumed even the
TV is in standby mode.
• If the TV loses power in special circumstances (such as
power outage or grid fluctuations, etc.), it may not work
well when it is switched on again. Please try to power
off the TV (by the (POWER) on the remote control) or
unplug and replug the AC cord to restart the TV.
• It is a normal phenomenon when the TV temperature rises
in the process of watching TV.
• Please do not cut off the power casually in the process
of switching on or switching off the TV, running APPS or
updating, otherwise TV system could not work correctly.
Please turn off the TV after closing all APPS.
Running the TV for the first time
Turning off the TV
Power indicator
After inserting the AC cord, the TV is in standby.
Press
(POWER) on the remote control or on the TV:
If the TV is switched on, press
(POWER) on the
remote control or the
(POWER) on the TV:
• The power indicator turns green. TV is switched on.
• You can switch the TV to standby by pressing (POWER)
on the remote control .
• TV is switched into standby and the image disappeared.
• The power indicator turns red from green. Press
(POWER) on the remote control to turn on the TV .
• If you want to turn off the TV from standby, please pull out
the AC cord.
Off Power off
Red
TV is in standby
Green
TV is switched on
User Guide
When the TV powers on for the first
first
time after
purchase, the setting wizard appears. Follow the
menus and make the necessary settings one after
another.
Confirm the following before turning on the
power
• Is the antenna cable connected?
• Is the AC cord plugged in?
Press (POWER) on the TV.
• It displays the boot screen , and then “Language
Setting” appears.
• It may cost a little time when TV is switched on for
the time. Please wait patiently.
You can select the Language Setting among the “
繁體
中文”
,
“简体中文
”
and
Traditional Chinese
Chinese
Simplified
“EN” .
You can start settings according to the following steps.
You can select the mode between “Home” and “Store”.
• “Home”: “STANDARD” will be the default value for the “AV
mode” setting.Please select
“Home” when you watch
TV at home.
• “Store”: “Store” is only for retail store displays. “DYNAMIC
(Fixed)” will be the default value for the “AV mode” setting.
If the “AV mode” is changed, the TV will automatically
switch back to “DYNAMIC (Fixed)” when there is no further
change to TV setting for 10 minutes.
Language Setting
Start Settings
Mode Setting
The TV will sort and store all the receivable TV channel
according to their settings and the connected antenna.
You can select “Ethernet” or “Wi-Fi” to connect the
network.
Please see page 21 to 22.
TV Channels Setting
Network Setting
LC-50_60S50H_EN.indd 15 2017/09/15 18:09:38
Page 47
16
When the initial setup has completed, you can enter to
smart home.
Press the , or
/
to switch the page of
smart home. If you want to watch TV, press
to select ATV, DTV or the input sources, and then
press OK. Move to the programme and press OK to
play the program in full-screen.
Watching TV
Signal Mode switch
When receiving a
stereo signal
NICAM STEREO , MONO
When receiving a
bilingual signal
NICAM DUAL Ⅰ, NICAM DUAL Ⅱ,
NICAM DUAL Ⅰ+Ⅱ, MONO.
When receiving a
monaural signal
NICAM MONO, MONO
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
In the NICAM TV broadcasts
Setup preferred audio language for DTV only.
In the TV mode of A2 TV broadcasts
Signal Mode switch
When receiving a
stereo signal
STEREO, MONO
When receiving a
bilingual signal
CH A, CH B, CH AB
When receiving a
monaural signal
MONO
MPX
Audio Language
Press (MENU) to display the menu screen
in full-screen TV programs
.
Press
(MENU) to display the menu screen
in full-screen TV programs
.
Press
(MENU) to display the menu screen
in full-screen TV programs
.
1
1
1
Press , press OK to select the desired
audio language.
Press to select the desired subtitle
language, and then press OK.
Press to select the desired audio
language, and then press OK.
3
3
3
2
2
2
Press to select "MPX" and then press
OK.
Press to select "Subtitle Language"and
then press OK.
Press to select "Audio Language" and
then press OK.
NOTE
• Select the audio language for ATV only.
NOTE
• The time displayed on the EPG is information sent by the
TV station.
Setup preferred subtitle language if the subtitle
languages are available.
Subtitle Language
Press (MENU) to display the menu screen
in full-screen TV programs
.
Press
(MENU) to display the menu screen
in full-screen TV programs
.
Press
(MENU) to display the menu screen
in full-screen TV programs
.
1
1
1
According to the above steps 1 and 2, you
can return to the currently tuned channel or
external input source.
3
2
2
2
Press to select "Back" and then press
OK.
Press to select "Info" and then press
OK.
Press to select "EPG" and then press
OK to display programme information.
You can switch the currently tuned channel or external
input source to the previously tuned channel or
external input source
.
Display the information of the programs, only for DTV.
The EPG(Electronic Programme Guide) is
broadcasted
together with DTV. The TV screen shows the EPG
when you select it , provided that the TV is receiving
the digital broadcasting signal. The EPG enables
you to check the schedule of DTV and view detailed
information.
Back
Info
EPG
Press (MENU) to display the menu screen
in full-screen TV programs
.
1
Press to select the desired channel ,
and then press OK to switch to the selected
channel.
3
2
Press to select "Program list" , and then
press OK.
Display the channel list.
Program List
MENU
LC-50_60S50H_EN.indd 16 2017/09/15 18:09:38
/
/
/ //
/
/
/
/
/
/
/
/
/
/
Page 48
/
/
/
/
/
/ /
/
/
/
/
/ /
17
General
Booting state
Skin setting
Quick start
NOTE
• “TV”: When turn on the TV, it displays TV mode.
• “Smart home”: When turn on the TV, it displays the smart
home.
You can set booting state between "TV" and "Smart
home".
You can change the skin of smart home.
Select from "Colour Surge" or "Minty Fresh".
The function can shorten the start-up time of the TV
.
No signal power off
Sleep timer
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals.
Five minutes before the power shuts down, the
remaining time displays every minute.
Auto power-off at a designated time.
You can choose from “Off”, “30min.”, “60min.”,
“90min.”, “120min.” or “150min.”.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
Watching TV
Press (MENU) to display the menu screen
in full-screen TV programs
.
Press
(MENU) to display the menu screen
with full screen HDMI3 TV signals .
Press to select "Label", and press OK
.
Press to select "Sort", and press OK
.
Press to select "Skip", and press OK.
The channel has been skipped.
Press to select "Delete". Press OK to select
"Yes", and then press OK to erase the selected
channel.
1
1
1
1
1
Press to select the desired channel.
3
2
2
2
2
2
3
Press to select "Program Edit",and then
press OK to display the channel list.
Press to select "HDMI Select" to
"4K(60Hz)", and then press OK.
Press OK to select a character,
and then press
(RETURN) to save and exit.
Press to move it to the desired position,
and then press OK.
You can select "Skip" and press OK again to
cancel the skip.
Repeat the above operation until the
completion of all of the channel.
Use this menu to set up a channel individually.
When you connect external device to output 4K (60Hz)
signal, please use the HDMI3 terminal and select "4K
(60Hz)".
According to your needs to set the options table.
Program Edit
HDMI Select
Settings
Sort
Label
Skip
Delete
Channel positions can be sorted freely.
You can change individual channel names.
Channels which have been setted to "Skip" are passed
over , even if using
CH
to select them.
Channels can be erased individually.
NOTE
• Maximum 8 alphanumerics can be input.
• Labeling is only available for the ATV mode.
Language
You can select a language from the menu.
Select from among
(Simplified (Traditional Chinese), Chinese)
3 languages: English,
繁體中文
簡體中文
.
NOTE
• The initial installation of the TV is “IQQI-International ”.
• If you use any other input method, SHARP cannot
guarantee its compatibility with television system.
Default input method
For setting input method.
Use numeric pad to input the channel number you
desired .
Numeric Pad
LC-50_60S50H_EN.indd 17 2017/09/15 18:09:38
Page 49
18
Watching TV
Selected item Description
COMPUTER For PC signal. (Available only when
inputting a signal from HDMI terminal.)
STANDARD For a highly
defined
image in a normally
bright room
.
MOVIE For viewing the movies.
GAME Lowers image brightness for easier
viewing.
USER Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC For a clear-cut image emphasising high
contrast for sports viewing.
DYNAMIC
(Fixed)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
Selected item
button
button
Contrast For less contrast. For more contrast.
Brightness For less brightness.
For more brightness.
Tint Skin tones become
reddish.
Skin tones become
greenish.
Sharpness For less sharpness.
For more sharpness.
Colour For less colour
intensity.
For more colour
intensity.
Backlight The screen dims.
The screen brightens.
Gamma
setting
For less middle
brightness.
For more middle
brightness.
Video
AV mode
Colour temp. (Colour temperature)
Wide mode
Contrast/Brightness/Tint/Sharpness/
Colour/Backlight/Gamma setting
The “AV mode” function enables you to select
appropriate settings for audio and video to account for
the system environment.
Adjusts the colour temperature to give the best white
image.
You can select different picture sizes that accountfor
the kind of each picture.
You can adjust the picture to your preference.
Set the video as you desired .
Selected item Description
Normal For 4:3 standard pictures. A side bar appears
on each side.
Zoom 14:9 For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also
see bars on the top and bottom with some
programmes.
Panorama In this mode the picture is progressively
stretched toward each side of the screen.
Full For 16:9 squeeze pictures.
Cinema 16:9 For 16:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
Cinema 14:9 For 14:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
Dot by Dot Display an image with the same number of
pixels on the screen (only when receiving 2160p
signal).
Underscan Display with an underscan image only when
receiving a 720p / 1080i / 1080p signal.
Display with the
High-Definition
image adjusted
optimally. Noise may appear on the edge of the
screen with some programmes.
NOTE
• You can select a different “AV mode” item for each input
mode.
Normal Zoom 14:9
Panorama
Cinema 14:9 Cinema 16:9 Full
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
• “Zoom 14:9” and “Cinema 14:9” are only available for the
DTV or ATV mode.
DNR
Reduce noise on screen and produces a clearer video.
You can select "Auto", "High", "Low", or "Off".
Active contrast
Fine Motion
Automatically adjust the contrast of an image
according to the scene.
Using the fine motion function can view the high speed
motion image more clearly.
You can select "Advanced", "Standard", or "Off".
Reset
Reset all picture adjustment items to the factory preset.
NOTE
• Only applicable for LC-50S50H.
• Only applicable for 24/30Hz input signal.
You can select "High", "M-high", "Middle", "M-low", or
"Low".
LC-50_60S50H_EN.indd 18 2017/09/15 18:09:38
Page 50
19
Watching TV
Auto volume
Bass/Treble/Balance
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The automatic volume control
(Auto volume) reduces this problem by equalizing
levels.
You can adjust the audio of the selected AV mode.
Audio
AV mode
Please see page 18.
Set the audio as you desired .
Selected item
button
button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio
from the right
speaker
Decrease audio
from the left speaker
NOTE
• They cannot be changed during “DYNAMIC (Fixed)” mode.
NOTE
• Analog channel audio and video input audio are output in
PCM mode even when "RAW" is selected.
• PCM digital input signals are output in PCM mode even
when "RAW" is selected.
Surround sound
Digital audio output
Reset
The surround sound function produces a surround
effect from the speakers.
This function allows you to select your favourite audio
output system.
Reset all audio adjustment items to the factory preset
values.
Channel
Auto search
Digital setting
Analogue setting
You can run auto installation again, even after setting
up the preset channels.
You can set some DTV channel items manually.
You can set some ATV channel items manually.
Set the channel as you desired .
Auto search
Auto search
Manual search
Signal info
Use this menu to add new DTV services automatically
after auto installation has been completed.
Use this menu to add new ATV services automatically
after auto installation has been completed.
Add new services within a specified frequency band.
Show the “Channel No.”, “Freq”, “Signal strength” and
“Signal quality” of the current program.
NOTE
• The values of “Signal strength” and “Signal quality” indicate
when to check the appropriate alignment of the antenna.
NOTE
• Auto search can only search channels from the current
mode.
Item Description
PCM16 The optical output format is normally in
PCM.
RAW Dolby Digital or DTS is output when the
Dolby Digital or DTS audio formats are
received.
LC-50_60S50H_EN.indd 19 2017/09/15 18:09:38
Page 51
20
Watching TV
You can set the channel manually.
Manual search
Program edit
Please see page 17.
Item Description
Storage to
[1~99]
Save programme to your desired
channel number. Press OK to save.
Current CH Select the channel you want to edit.
Colour system Select the optimum colour system to
receive. (PAL, SECAM, NTSC)
Sound system Select the optimum sound system
(Broadcasting system) to receive. (BG,
DK, I, MN)
Search Start searching from current channel.
You can search the next channel by
pressing to adjust the frequency .
Fine-Tune Tune the frequency of the stored channel
to your desired position.
Network
Apps
Please see pages 21 to 22.
Please see pages 23.
Option
For setting other items.
Digital audio language
Subtitle
Set up to preferred multi audio languages to display if
the audio languages are available.
NOTE
• This function depends on audio language information from
broadcasters.
• If audio for the selected language is not included in a received
broadcast, audio will not be output for that language.
Setup preferred subtitle language if the subtitle
languages are available.
NOTE
• If subtitles for the selected language are not included in
a received broadcast, subtitles will not be shown for that
language.
For hearing impaired
If the broadcast includes subtitles for the hearing
impaired, they will take precedence over other
subtitles.
NOTE
• If the broadcast includes no subtitles for the hearing impaired,
they will not be displayed even when set to “On”.
System info
Legal info
System recovery
Local update
From here , you can view the Hardware info and
Software info.
From here , you can view the open source licenses.
This function allows you to transform to the latest
software via a USB device.
System
You can view and set the info about the system.
NOTE
• If the software is not compatible with the system,an
error message appears on the screen. Please enter
Settings→System →Local update to operate
.
• When an error message displays, check
firmly.
files.
file
file
to see if
• The USB device is inserted
• The USB memory has two or more software
• No software for updating the system exists in the USB
memory.
• The software is broken.
• The software is not compatible with your TV’s
software.
• Please do not turn off TV or execute other operations
during version up.
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
LC-50_60S50H_EN.indd 20 2017/09/15 18:09:38
/
Page 52
21
Network function
To enjoy internet services, you need to connect the
TV to a router with a high speed connection to the
internet.
NOTE
• If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask your
internet service provider or telephone company.
• A stable connection speed is required to play back
streaming content, otherwise you may not be able to watch
normally.
Switch on the router (commercially available). Refer to
the router’s operation manual for switching on.
Connect the LAN terminal on the TV to the router
(commercially available) with a LAN cable
(commercially available).
Switch on the router (commercially available). Refer to
the router's operation manual for switching on.
Connecting to the Network
Wired installation
Wireless installation
Wired connection overview
How to connect
LAN cable
(commercially available)
Router
LAN terminal
LAN
LAN
Wireless LAN router/access point
TV
Network
NOTE
• This TV has received the following certifications.
– Wi-Fi CERTIFIED™ program from the Wi-Fi
Alliance®)
•
A wireless LAN connection and performance cannot be
guaranteed for all residential environments. In the following
cases, the wireless LAN signal may be poor or drop, or the
connection speed may become slower.
–
When used in buildings made with concrete, reinforced
steel, or metal.
– When placed near objects that obstruct the signal.
– When used with other wireless devices that emit the
same frequency.
–
When used in the vicinity of microwave ovens and other
devices that emit a magnetic field, electrostatic charge, or
electromagnetic interference.
• Make sure the firewalls in your network allows access to
the TV wireless connection.
• Operations cannot be guaranteed when used with access
points that do not have Wi-Fi certification.
®
• A wireless LAN access point is required to connect the
TV to the Internet using a wireless LAN. See the operation
manual of your access point for setup.
• A stable connection speed is required to play back
streaming content. Use a wired connection if the wireless
LAN speed is unstable.
• As there are lots of formats in the internet, some formats
may not be supported by this TV unit.
• Before transferring to a third-party or disposal, be sure to
initialise the wireless LAN settings.
LC-50_60S50H_EN.indd 21 2017/09/15 18:09:38
(certifications
Page 53
22
Network function
You can select "Ethernet" to connect the network.
You can add unbroadcast wireless network manually.
Enter the information about the unbroadcast wireless
network , and then select “Save”. Now the TV is
connected to the unbroadcasted wireless network.
When adjust “Wi-Fi” to “On”, it displays the nearly
wireless network.
If the current network connection security is not
open, you should enter the password from software
keyboard by pressing OK on the remote control.
You can select “Wi-Fi” to connect the network.
Ethernet network connection
Wireless network connection
DHCP
Manual connection
Add network
System will attempt to obtain IP address and other
information automatically.
You can setup IP address, Gateway, Subnet mask,
First DNS and Second DNS following the on-screen
instructions.
Select “Setting” in the menu, and then press OK.
Press to select “Network”, and then press OK. It
displays the connect format.
Network setting
NOTE
• You can press MENU to select "Network" to switch the
connection between Ethernet network connection and
Wireless network connection.
LC-50_60S50H_EN.indd 22 2017/09/15 18:09:38
/
Page 54
/
/
23
Smart function
You can download and install amounts of Apps from
the third-party of the smart TV.
Press
(HOME) to display the smart home.
Apps
Installing Apps
Smart home will provide TV and APP screens. It’s
convenient for you to operate with intuitive interface.
You can slide screes between TV and APP, and press
OK into content.specific
From “App Store”, select the App you desired, and
install it according to prompt in the screen.
You could manage all Apps that have been
downloaded into TV.
Provide you mass Apps.
In APP screen, you can experience the supplied
applications provided with the TV, also you can
download more apps from the app store.
Select an input source (ATV, DTV, HDMI1, HDMI2,
HDMI3, COMPONENT, AV) , and then press OK on
the remote control.
Select “Settings” and press OK in the APP
screen.
Press to select "Apps", and then press
OK. Press to select the items you want,
and then press OK.
1
2
APP
Smart home
TV
I
nstall applications from unknown sources
My Apps
Default installation location
From here, you can setup whether applications are
allowed to install from unknown sources.
It will display applications list that have been installed.
Operations such as “Force stop”, “Uninstall”, “Clear
cache” or “Move to SD card/Move to internal” can be
used to an application.
From here , you can setup the default installation
location. Select from among 3 locations: Default,
Internal, External.
Internal storage
SD card storage
From here, you can view the free space and the total
storage space of TV.
From here, you can view free space and the total
storage space of SD card.
NOTE
• When using the child mode app, if you forget password,
please enter the password "3001" to reset.
Format SD card
Safely Remove SD card
To format SD card .
Remove SD card after you have safely unloaded it.
NOTE
• If you format SD card , the content stored in the SD
card will be deleted completely and the content is
unrecoverable. Please operate it carefully.
NOTE
• Do not unplug the memory card while data is being
transferred. Otherwise the TV may malfunction.
NOTE
• Browser can be uninstalled, If the browser is uninstalled,
you can’t start browsing internet even though you press
• Unplug the memory card after you have safely unloaded it
or the TV has been turned off.
• Please regularly back up data in the memory card to
prevent data corruption or operating errors of the TV.
(SHARP shall not bear any responsibility for data corruption
or destruction.)
It provides virtual keyboard input mode. In the process,
you can choose character by moving cursor, and press
OK to complete character input. At the same time, you
can change the input mode from virtual keyboard.
The virtual keyboard appears when you press OK to
input text.
In App screen, select "Browser" and press OK, or
press
(BROWSER
(BROWSER).
) on the remote control to start
browsing internet.
Text input
Browser
LC-50_60S50H_EN.indd 23 2017/09/15 18:09:38
Page 55
/
/ /
/
/ /
/
24
Other useful features
• The USB 1 and USB 2 terminals cannot be
connected with USB hard disk drives at the same
time.
• When connecting a USB hard disk drive, be sure to
use a hard disk drive with an AC adapter.
• Do not remove the memory device from the TV
while transferring
• Do not insert and remove a USB memory device/
USB hard disk drive to and from the TV repeatedly.
• When using a card reader, be sure to insert Memory
beforefirst using the card reader.
• The TV may not be able to recognise the card
reader.
• Please follow the rules below when the TV is
displaying the file of the USB device:
—Please do not turn off the TV directly.
—Please don’t disconnect the USB device directly.
—Please be sure to exit from USB interface before
removing the USB device, otherwise you may lose
the data , damage the device or TV system may not
work properly.
• If the TV connects with USB-HUB, the TV may not
be able to recognise all USB memory devices.
NOTE
• Depending on the USB memory device, the TV may not be
able to recognise the data.
• It may take time to read the data if the USB memory device
contains many or folders.
• External subtitles for some video files
files.
files
may not be
supported.
You can connect a USB memory device or a USB hard
disk drive (HDD) to the TV to enjoy viewing pictures,
listening to the audio, and watching videos.
Insert the USB memory device with recorded pictures
audio or videos into the USB 1 or USB 2 terminal on
the TV.
CAUTION
• Do not use the USB extension cable, otherwise it may
cause the TV does not work properly.
• Please insert the USB device after the TV is powered
on properly.
Press (
HOME
) to display the smart home,
Press
/
to switch to App screen and
select “LocalMM” and then press OK.
1
Press to select the desired folder,
such as "File", "Picture", "Audio", "Video", and
then press OK. Select the desired file , and
then press OK.
• Press
(RETURN) on the remote control, you
can exit to the upper folder.
Press
(MENU)
to display the USB media
operation menu when you view a photo or a video.
Press
to select the relevant functions, and
then press OK.
To know the buttons for USB media operation in
detail, please see page 25.
3
4
2
Press to select the device or disk
drive you want.
Connecting a USB memory device
Playing back files on a USB memory
device
LC-50_60S50H_EN.indd 24 2017/09/15 18:09:38
Page 56
25
Buttons for USB media operation
Button/menu Description
Video
mode
Audio
mode
Picture
mode
Play/Pause.
－
Go to the previous file.
－ －
Go to the next file.
－ －
Loop.
Each time you press OK, the mode will switch from Order
play, Repeating all songs, Play this song only once, Repeating
current song and Shuffle is on.
－ －
Playlist
Select a file from the playlist to start playback.
－ －
Scale
Press CH to switch photo size.
Press to move.
－ －
Rotate
Rotate the picture
Press or to roate the image 90 degress anticlockwise,
and press or to roate the image 90 degress clockwise.
Press
to exit this mode.
－ －
Sliding
Set the Time Interval and Animation of the slide.
－ －
TV Setting
You can set the TV.
Subtitle
Options
Set Subtitle On-off, Subtitle Select, Subtitle Switching, Subtitle
Search and Subtitle Advanced.
－ －
Audio Options
Select audio track.
－ －
Jump Time
Set the starting playback time.
－ －
Advanced
Options
Set Continue Play, Forward Rewind and Single Cycle.
－ －
Press OK to the previous file.
－ －
Press OK to the next file.
－ －
Fast forward Press to fast forward.
－
Reverse Press to reverse.
－
Go to the previous file.
－ －
Go to the next file.
－ －
Other useful features
LC-50_60S50H_EN.indd 25 2017/09/15 18:09:38
／
/
/
/ /
Page 57
26
LC-50_60S50H_EN.indd 26 2017/09/15 18:09:38
Other useful features
List of file formats compatible with USB mode
Supported video format
File
extension
Video decoder Audio decoder Subtitle
.avi
MPEG2 MP@HL
MPEG4 SP@L0-3,ASP@L-05
MPEG4 ASP(GMC0,1p)
H.264 HP@Up to Level 4.0
H.264 MP@L 4.0
H.265(HEVC) Main Profile @
Up to Level 5 (4k2k 30 fps)
MPEG4 ASP@Level5
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
H.264 (AVC) MP@L 4.1
PCM
AC3
WMA,WMA Pro
MP3
AAC,support MPEG2 AAC(AAC-LC) & MPEG4
AAC-LC
HE-AAC,support MPEG4 HE-AAC v2
MPEG Audio,support MPEG1 Layer 1/2
Dolby Digital Plus
Dolby Digital
DTS
External:
MicroDVD
SRT
SSA
ASS
Subview
Vobsub
Inside:
Vobsub
.mkv
MPEG1 MP
MPEG2 MP@HL
MPEG-4 SP@HL 3.0 & MPEG-4 ASP@HL 4.0
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
H.265(HEVC) High/Main Profile @
Up to Level 5 (4k2k 30 fps)
MPEG1
MPEG4 SP
MPEG4 ASP @Level 5
H.264 (AVC) MP@L 4.1
AAC(AAC-LC)(H.264)
AC3
Dolby Digital Plus
Dolby Digital
DTS
External:
MicroDVD
SRT
SSA
ASS
Subview
Vobsub
Inside:
SSA
ASS
SRT
Vobsub
.ts
MPEG2 MP@HL
H.264 High Profile to level 5.1
H.264 Main Profile to level 4.1
H.264 baseline Profile to level4.0
H.264 HP@Up to Level 4.1
H.264(AVC) MP@L4.1
H.264(AVC) BP@L3.1
H.265(HEVC) Main Profile @
Up to Level 5 (4k2k 30 fps)
MPEG Audio,support MPEG1 Layer 1/2 &
MP3(MPEG2)
LPCM
Dolby Digital Plus
Dolby Digital
AC3
MP3
DTS
AAC
-
.trp
MPEG2 MP@HL
H.264 HP@Up to Level 4.1
H.264(AVC) MP@L4.1
MP3 -
.tp MPEG2 MP@HL MP3 -
.m2ts
MPEG2 MP@HL
H.264(AVC) MP@L4.0
H.264(AVC) BP@L4.0
H.265(HEVC) Main Profile @
Up to Level 5 (4k2k 30 fps)
AC3
AAC
Dolby Digital
-
.vob
.mpeg
MPEG1
MPEG2 MP@HL
LPCM
Dolby Digital
Dolby Digital Plus
-
.dat
MPEG1
MPEG2
MP3 -
.mov
MPEG4 SP
MPEG2 MP@HL
MJEPG
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
Dolby Digital Plus
Dolby Digital
-
H.264 HP10 LV 4.0
H.264 MP10 LV 4.0
H.264 BP LV 4.0 (**2)
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
MPEG4 SP
MPEG4 ASP@Level 5
H.264(AVC) MP@L4.1
MPEG4 AAC-LC
MPEG1 Layer 1/2
External:
MicroDVD
SRT
SSA
ASS
Subview
Vobsub
Page 58
27
LC-50_60S50H_EN.indd 27 2017/09/15 18:09:38
NOTE
• USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
• Video in Motion JPEG format with a resolution higher than
1280x720 may not be played back correctly.
• Some file formats in the above list may not be played back
correctly (including images, sounds, subtitles, etc.).
• Depending on the bit rate, some files may not be played
back.
• The TV supports DTS encoded video files instead of DTS
surround sound formats.
• Some subtitles may not be displayed correctly and this may
affect the TV operation.
• Only show the compatible file format.
• According to different files the displayed playback time
may be sightly different from the actual .
• The length of time information may not be displayed
correctly in some file.
Other useful features
Supported audio format Supported picture format
File
extension
Video decoder Audio decoder Subtitle
.mp4
MPEG2 MP@HL
MPEG4 SP
MPEG4 ASP@Level 5
MPEG-4 SP@HL 3.0 & MPEG-4 ASP@HL 4.0
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
H.264(AVC) MP@L4.0
H.264(AVC) BP@L4.0
H.265(HEVC) Main Profile @
Up to Level 5 (4k2k 30 fps)
MPEG1 Layer 1/2
Dolby Digital Plus
Dolby Digital
MPEG4 (AAC)
AAC
HE-AAC (AAC+)
HE-AAC v2 (enhanced AAC+)
MPEG4 (Enhanced Low Delay AAC)
External:
MicroDVD
SRT
SSA
ASS
Subview
Vobsub
.3gp
MPEG2 MP@HL
MPEG-4 SP@HL 3.0 & MPEG-4 ASP@HL 5.0
H.264 HP@Up to Level 5.1
H.264 HP@Up to Level 4.1
H.264(AVC) MP@L4.0
H.264(AVC) BP@L4.0
H.263
MPEG1 Layer 1/2
AMR_NB
AAC
External:
MicroDVD
SRT
SSA
ASS
Subview
Vobsub
.rmvb Real Video 8, 9, 10 - -
.webm VP8 - -
DTMB
AVS:Full-HD 60P decoder Jizhun Profile @ Level
6.2 (supports 4:2:0 format),Full-HD 60P decoder
MPEG2 MP@HL
H.264 HP@Up to Level 5.1
H.264(AVC) MP@L4.0
H.264(AVC) BP@L4.0
Dolby Digital Plus
Dolby Digital
MPEG1 Layer 1/2 (MPEG2)
MPEG2 (AAC-LC)
(H.264) & MPEG4 AAC-LC (H.264)
DRA(decode)
-
File extension Audio decoder
.mp3 MPEG1 Layer 1/2/3
.wma WMA WMAPro, WMA V9
.flac flac
.ogg VORBIS
.wav WAVE, PCM
.mka AC3
.aac AAC
.m4a AAC
.mid MIDI
File
extension
Picture decoder
JPEG
progressive 4000*4000
baseline 8000*8000
PNG 4096*5760
GIF 8000*8000
BMP 8000*8000
Page 59
28
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV
serviced.
Problem Possible solution
• No power. • Is the AC cord disconnected? (See page 11.)
• Has the power been turned on? (See page 15.)
• When the power switch does not work, remove the power plug and insert it again,
and press
(
POWER
) on the TV after waiting more than five seconds.
• Unit cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off or unplugging
the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
• Are batteries inserted with polarity (+, -) aligned? (See page 14.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluoresent lighting?
• Is a flour resent light shinning on the remote control sensor?
• Picture is cut off. • Are screen mode adjustments such as picture size made correctly? (See page 18.)
• Strange colour, light colour, or
dark, or colour misalignment.
• Adjust the picture tint. (See page 18.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See page 20.)
• Power is suddenly turned off. • The unit's internal temperature has increased.
Remove any objects blocking the vent or clean.
• Is the sleep timer, no signal power off ? (See page 17.)
• No picture. • Is the connection to external equipment correct? (See pages 12, 13 and 24.)
• Is the correct input selected? (See pages 23.)
• Is the picture adjustment correct? (See page 18.)
• Is the antenna connected properly? (See page 11.)
• Check the colour
system setting. (See page 20.)
• No sound. • Is the volume too low? (See page 10.)
• Check the sound system setting. (See page 20.)
• The TV sometimes makes a
cracking noise.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV's
performance.
• Cannot select the desired channel. • Switch between Digital TV and Analogue TV modes. (See page 23.)
• Cannot connect to the Network • Is the LAN cable connected correct. (See pages 21 and 22.)
• Check the “LAN setting”.
Appendix
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room,office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: -20°C to +60°C.
LC-50_60S50H_EN.indd 28 2017/09/15 18:09:38
Page 60
29
Appendix
Specifications
Item
Model
LC-50S50H LC-60S50H
Resolution
8,294,400 pixels (3840(H) x 2160(V))
Video colour system
PAL / SECAM / NTSC 3.58 / NTSC 4.43 / PAL 60
TV function
TVStandard
Analogue PAL:BG, DK, I SECAM:BG, DK
NTSC:MN
Digital
DTMB
Receiving
channel
VHF/UHF
44.25MHz-863.25 MHz
CATV S1-S41ch (including Hyperband)
Digital terrestrial
broadcast
52.50MHz-866.00MHz
STEREO/BILINGUAL
NICAM: BG, I, DK ; A2 stereo: BG
TV tuning system
Analogue Auto preset 99 channel
Digital Auto preset 999 channel
Audio amplifier
10W (L / R)
Speaker
(30 mm x 15mm; ) x 2
Terminals
Side
USB1
USB 2.0
SD
SD/SDHC
USB2
USB 3.0
HDMI 1
HDMI (HDMI input) (480i, 576i, 480p, 576p, 720p/50Hz, 720p/60Hz, 1080i/50Hz,
1080i/60Hz, 1080p/50Hz, 1080p/60Hz, 1080p/24Hz, 2160p/30Hz)
HDMI 2
HDMI (HDMI input) (480i, 576i, 480p, 576p, 720p/50Hz, 720p/60Hz, 1080i/50Hz,
1080i/60Hz, 1080p/50Hz, 1080p/60Hz, 1080p/24Hz, 2160p/30Hz)
ANTENNA
UHF/VHF 75 Ω Din type
HDMI 3
HDMI (HDMI input) (480i, 576i, 480p, 576p, 720p/50Hz, 720p/60Hz, 1080i/50Hz,
1080i/60Hz, 1080p/50Hz, 1080p/60Hz, 1080p/24Hz, 2160p/30Hz, 2160p/50Hz,
2160p/60Hz)
Rear
Digital Audio Output Optical digital audio output
Special service terminal Only for service
COMPONENT/AV INPUT
COMPONENT in (480i, 576i, 480p, 576p, 720p/50Hz, 720p/60Hz, 1080i/50Hz, 1080i/60Hz),
AUDIO in ; VIDEO in, AUDIO in
LAN (ETHERNET 10/100)
Network connector
OSD language English/Simplified Chinese/Traditional Chinese
Power requirement
AC 110-240 V, 50Hz
Power consumption (Standby)
130W (0.5W) 190W (0.5W)
Weight
Without stand
14.0 kg 21.0 kg
With stand
15.0 kg 22.0 kg
Operating temperature 0 °C to + 45 °C
•
As a part of policy of continuous improvement, SHARP reserves the right to make design and
changes for product improvement without
prior notice.
LC-50_60S50H_EN.indd 29 2017/09/15 18:09:38
Φ
60mm (30 mm x 15mm
; ) x 2
Φ
60mm
Page 61
30
Dimensional drawings
Appendix
LC-50_60S50H_EN.indd 30 2017/09/15 18:09:38
Unit: mm
*1 Active area
*2 Thinnest part
LC-50S50H
LC-60S50H
1331
748
Loading...