Sharp Aquos LC-60LE600U, Aquos LC-70LE600U Operation Manual

Download

Page 1

LC-70LE600U LC-60LE600U

LIQUID CRYSTAL TELEVISION

OPERATION MANUAL

ENGLISH

IMPORTANT : Please read this operation manual

before starting operating the equipment.

Supplied Accessories

Make sure the following accessories are provided with the product.

Remote control unit (g1)

Page 9

Connection guide (g1)

■

• Always use the AC cord supplied with the TV.

• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.

• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.

• The examples used throughout this manual are based on the LC-60LE600U model.

“AA” size battery (g2)

Page 10

Stand unit (g1)

Page 7

Operation manual

(g3 languages)

Page 2

IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space

Model No.:

Serial No.:

provided. The numbers are located at the rear and right side of the TV.

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

The lightning ﬂash with arrow-head symbol, within an equilateral

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING: FCC Regulations state that any unauthorized changes or modiﬁcations to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment.

CAUTION: This product satisﬁes FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

Printed in Mexico

TINS-F576WJZZ

12P07-MX-NM

Page 3

IMPORTANT INFORMATION

DECLARATION OF CONFORMITY:

SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-70LE600U/LC-60LE600U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RESPONSIBLE PARTY: SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 TEL: 1-800-BE-SHARP For Business Customers: URL http://www.sharpusa.com

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820 of the National Electrical Code that provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical."

This product qualiﬁes for ENERGY STAR when "Home" is selected for "TV Location". Setting "TV Location" to "Home" allows the TV to achieve an energy-saving status for household use.

Trademarks

• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of

Dolby Laboratories.

• The terms HDMI and HDMI High-Deﬁnition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

• Products that have earned the ENERGY STAR are designed to protect the environment through superior

energy efﬁciency.

Page 4

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or ﬁre. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories speciﬁed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Information

15) Power Sources—This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of ﬁre or electric shock.

17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a ﬁre or electric shock. Never spill liquid of any kind on the product.

18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualiﬁed service personnel under the following conditions:

a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment

of other controls may result in damage and will often require extensive work by a qualiﬁed technician

to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service.

19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement parts speciﬁed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in ﬁre, electric shock, or other hazards.

20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.

Page 5

IMPORTANT SAFETY INSTRUCTIONS

• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70,

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA LEAD IN WIRE

provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

NEC — NATIONAL ELECTRICAL CODE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING

ELECTRODE SYSTEM (NEC ART 250)

• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the manufacturer.

• Selecting the location — Select a place with no direct sunlight and good ventilation.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufﬁ cient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's instructions are followed.

• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.

• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including ampliﬁ ers) that produce heat.

• The Liquid Crystal panel is a very high technology product with 2,073,600 pixels, giving you ﬁ ne picture details.

Occasionally, a few non-active pixels may appear on the screen as a ﬁ xed point of blue, green or red. Please note that

this does not affect the performance of your product.

• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

• To prevent ﬁ re, never place any type of candle or ﬂ ames on the top or near the TV set.

• To prevent ﬁ re or shock hazard, do not place the AC cord under the TV set or other heavy items.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• To prevent ﬁ re or shock hazard, do not expose this product to dripping or splashing.

No objects ﬁ lled with liquids, such as vases, should be placed on the product.

• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may result in ﬁ re or electric shock. Exercise special caution when using the product around children.

Precautions when transporting the TV

• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the TV by two people holding it with two hands — one hand on each side of the TV.

Caring for the Cabinet

• Use a soft cloth (cotton, ﬂ annel, etc.) and gently wipe the surface of the cabinet.

• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking.

• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.

• If the cabinet is very dirty, wipe with a soft cloth (cotton, ﬂ annel, etc.) soaked in neutral detergent diluted with water and thoroughly wrung out, and then wipe with a soft dry cloth.

• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off.

• Do not apply insecticides or other volatile liquids.

Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers

inside the plastic may cause the cabinet to deform and cause the paint to peel off.

Page 6

IMPORTANT SAFETY INSTRUCTIONS

Caring for the Liquid Crystal panel

• Turn off the main power and unplug the AC cord from the wall outlet before handling.

• Gently wipe the surface of the display panel with a soft cloth (cotton, ﬂ annel, etc.).

To protect the display panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry

sheet type cloth, etc.). This may damage the surface of the display panel.

• Wiping with a hard cloth or using strong force may scratch the surface of the display panel.

• Use a soft damp cloth to gently wipe the display panel when it is really dirty.

(It may scratch the surface of the display panel when wiped strongly.)

• If the display panel is dusty, use an anti-static brush, which is commercially available, to clean it.

• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are

available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for ordering, or VISIT http://www.sharpusa.com/SharpDirect.

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE

• The home theater entertainment experience is a growing trend and larger ﬂ at panel displays are popular purchases. However, ﬂ at panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.

• Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury.

THIS MANUFACTURER CARES!

• The consumer electronics industry is committed to making home entertainment enjoyable and safe.

TUNE INTO SAFETY

• One size does NOT ﬁ t all. Follow the manufacturer’s recommendations for the safe installation and use of your ﬂ at panel display.

• Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t place ﬂ at panel displays on furniture that can easily be used as steps, such as a chest of drawers.

• Remember that children can become excited while watching a program, especially on a “larger than life” ﬂ at panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.

• Care should be taken to route all cords and cables connected to the ﬂ at panel display so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

• Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• If you have any doubts about your ability to safely install your ﬂ at panel display, contact your retailer about professional installation.

• Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.

• A minimum of two people are required for installation. Flat panel displays can be heavy.

Note: CEA is the preeminent trade association promoting growth in the $161 billion U.S. consumer electronics industry. More than 2,200 companies enjoy the beneﬁ ts of CEA membership, including legislative advocacy, market research, technical training and education, industry promotion and the fostering of business and strategic relationships

Page 7

QUICK REFERENCE

Attaching the Stand

• Before attaching the stand, make sure to turn off the TV and unplug the AC cord.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

• Attach the stand in the correct direction.

• Do not remove the stand from the TV unless using an

optional wall mount bracket to mount it.

•

Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

• After attaching the stand to the TV, do not hold the

stand when you put up, set up, move or lay down the TV.

Conﬁ rm that there are 12 screws (8 long screws

and 4 short screws) supplied with the stand unit.

Set the post for the stand unit onto the

polystyrene foam. Attach the base to the post.

Insert and tighten the 8 screws into the 8 holes

on the bottom of the base.

• Hold the stand unit securely with one hand, and then tighten the screws.

Long screws

Removing the Stand

• Before detaching the stand, make sure to turn off the TV and unplug the AC cord.

CAUTION

• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

Unfasten the four screws used to secure the stand

in place.

Detach the stand from the TV.

FRONT

Insert the stand into the openings on the bottom

of the TV.

• Make sure that the stand is ﬁ rmly inserted into the TV. Improper installation may result in tilting of the TV set.

Insert and tighten the 4 screws into the 4 holes

on the rear of the TV.

Soft cushion

Short screws

• In the installation procedure, be careful not to catch your ﬁ ngers between the TV set and the ﬂ oor.

Page 8

QUICK REFERENCE

Setting the TV on the Wall

CAUTION

• This TV should be mounted on the wall only with the

wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

• Installing the TV requires special skill that should

only be performed by qualiﬁ ed service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

•

You can ask a qualiﬁ ed service professional about using an optional AN-52AG4 bracket to mount the TV to the wall.

• Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-52AG4 wall mount bracket. (See the bracket instructions for details.)

• Due to the terminal conﬁguration on this TV, when you wall-mount this model, make sure there is enough space between the wall and the TV for the cables.

• To use this TV mounted on a wall, remove the AC cord holder on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.

Vertical mounting Angular mounting

About setting the TV angle

AN-52AG4

0/5°

LC-70LE600U

• The center of the display:

/64 inch (10.0 mm) above

the “c” position.

LC-60LE600U

• The “e” position is at the center of the display.

• Refer to the operation manual of AN-52AG4 for details.

Optional Accessory

The listed optional accessory is available for the Liquid Crystal Television. Please purchase them at your nearest shop.

• Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.

Part name Model number

Wall mount bracket

AN-52AG4

Page 9

QUICK REFERENCE

QUICK INSTALLATION TIPS

Attach your antenna to the back of the television.

(See page 10.)

Connect the AC plug for the television into the AC

outlet.

AC outlet

• Place the TV close to the AC outlet, and keep the power plug within reach.

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT

TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.

When turning on the TV for the ﬁ rst time, press

POWER on the television.

POWER

Experiencing HD images

An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following:

• Over-the-air broadcasting via HD quality antenna

• HD cable/satellite subscription

• HD compatible external equipment

• For information on updating to HD programming, ask your cable/satellite service provider.

Using the Remote Control Unit

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.

Remote control sensor

30°

17´ (5 m)

30°

Insert the batteries into the remote control unit. (See

page 10.)

• Speakers cannot be detached from the TV.

• TV angle cannot be adjusted.

30°

Cautions regarding the remote control unit

■

• Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

• Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.

• The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control sensor.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

Page 10

Preparation

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.

1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available).

F-type connector

75-ohm coaxial cable (round)

2. A 300-ohm system is a ﬂ at “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (Commercially available).

NOTICE

F-type connector should be ﬁ nger-tightened only.

300-ohm twin-lead cable (ﬂ at)

F-type connector

When connecting the RF cable to the TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your TV set. (The breaking

75-ohm coaxial cable

of internal circuit, etc.)

Connecting Antenna

• Connect the antenna cable to the TV using one of the methods in the illustration as shown (1,2,3 or 4).

Cable without a CATV

converter

VHF/UHF antenna

Combination VHF/

UHF antenna

Cable

Cable TV lead-In

75-ohm coaxial cable (round)

300-ohm twin-lead cable (ﬂat)

Home Antenna terminal (75-ohm)

(commercially available)

Coaxial cable (commercially available)

300/75-ohm adapter

Separate VHF/UHF

antenna

VHF ANTENNA

UHF ANTENNA

300-ohm twin-lead cable

75-ohm coaxial cable

300-ohm twin-lead cable

IN OUT

Combiner (commercially available)

To TV antenna terminal

Installing Batteries in the Remote Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

1 Open the battery cover.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you ﬁ nd any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove batteries from it.

2 Insert two “AA” size batteries

(supplied with the product).

• Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

3 Close the battery cover.

Page 11

Part Names

TV (Front)

OPC sensor *

TV (Rear/Side)

Remote control sensor

* OPC: Optical Picture Control (See page 19.)

PC IN terminal

DIGITAL AUDIO OUTPUT terminal

Center Icon illumination (See page 25.)

AUDIO input terminal (shared for HDMI 1 and PC IN) *3

HDMI 1 terminal HDMI 2 terminal

OUTPUT terminals

Antenna/Cable in

COMPONENT terminals

POWER button

MENU button

INPUT button

Channel buttons (CHU/V)

Volume buttons (VOLk/l)

*1 See page 12 for external equipment connection. *2 See pages 13 and 18 for button operations. *3 See page 21 for details on the PC Audio Select function.

SERVICE terminal

HDMI 3 terminal

VIDEO terminals

Page 12

Connecting to External Equipment

You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See page 16.)

For connecting the TV to external equipment, use commercially available cables.

• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.

CAUTION

Connecting a Blu-ray Disc Player, DVD Player, Cable/Satellite Set-top Box, VCR, Game Console or Camcorder

■

Quality

• To protect equipment, always turn off the TV before connecting any external equipment.

• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

Terminal on external

equipment

HDMI-certiﬁed cable

DVI-HDMI conversion cable

Terminal on the TVCable

HDMI 1, 2 or 3

*1 *2 *3

AUDIO

COMPONENT

VIDEO

Standard

Quality

DVI OUT

AUDIO

ø 3.5 mm stereo minijack cable

Component video cable

Audio cable

AV cable

*1 Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz. *2 When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to

connecting a DVI-HDMI conversion cable to the HDMI 1 terminal, connect a ø 3.5 mm stereo minijack cable to the AUDIO input terminal and set "PC Audio Select" to "HDMI1". (See page 21.)

*3 To enjoy 1080p display capability, connect your external equipment using an HDMI-certiﬁ ed cable or a component cable and

set the equipment to 1080p output.

Connecting an Audio Ampliﬁ er

■

Terminal on external

equipment

Optical ﬁber cable

Audio cable

Terminal on the TVCable

DIGITAL AUDIO OUTPUT

OUTPUT

*4 The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software. *5 See page 25 for details on the Output Select function.

Connecting a PC

■

Terminal on PC

Analog RGB cable (D-sub 15-pin cable or VGA cable)

DVI OUT

AUDIO

*6 When connecting a PC to the PC IN, set "PC Audio Select" to "PC IN". (See page 21.) *7 Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certiﬁ ed cable

to the HDMI 1 terminal, connect a ø 3.5 mm stereo minijack cable to the AUDIO input terminal and set "PC Audio Select" to "HDMI1". (See page 21.)

• The HDMI terminals only support digital signal.

• Refer to page 28 for a list of PC signals compatible with the TV.

ø 3.5 mm stereo minijack cable

HDMI-certiﬁed cable

DVI-HDMI conversion cable

ø 3.5 mm stereo minijack cable

Terminal on the TVCable

PC IN

AUDIO

HDMI 1, 2 or 3

AUDIO

Page 13

Watching TV

Turning On/Off the Power

POWER

Press POWER on the TV or on the remote control unit to turn the power on.

• The Initial Installation starts when the TV powers on for the ﬁ rst time. If the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perform "EZ setup" on the Setup menu on page 21.

Press POWER on the TV or on the remote control unit again to turn the power off.

• The TV enters standby and the image on the screen disappears.

POWER

(On/Standby)

• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.

• Weak electric power is still consumed even when the TV is turned off.

Initial Installation

When you turn on the TV for the ﬁ rst time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit.

Insert the batteries into the remote control unit. (See page

10.)

2. Connect the antenna cable to the TV. (See page 10.)

3. Plug in the AC cord to the AC outlet. (See page 9.)

Language (Language setting)

Select from among 3 languages: English, French and Spanish.

Press c/d to select the desired language listed on

the screen, and then press ENTER.

Language English

TV Location

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

Press c/dto select "Air" or "Cable", and then

press ENTER.

Air/Cable Cable

CH Search

CH Search (Channel search)

Channel auto search makes the TV look for all channels viewable in the set area.

After "Air/Cable" has beet set,

the

cursor moves to

"CH Search". Pressd or ENTER to start channel search.

Air/Cable Cable

CH Search

TV Location

Select "Home" or "Store" for the location where you plan to install the TV. This product qualiﬁ es for ENERGY STAR in Home mode default setting.

Press c/dto select "Home" or "Store", and then

press ENTER.

TV Location Home

Air/Cable

Home: AV Mode is set to "STANDARD". Store: AV Mode is set to "DYNAMIC (Fixed)".

•

ENERGY STAR qualiﬁ cation is based on AV Mode "STANDARD".

• If no channel is found, conﬁ rm the type of connection made with your TV and try "EZ Setup" again. (See page 21.)

• For changing the settings of the Initial Installation, perform "EZ setup" on the Setup menu on page 21.

Page 14

Direct Button Operation

ԝԣ ԟ

Ԙ Ԥ

Ԟ ԧ

Ԝ Ԡ ԛ

Ԣ ԥ

Changing Volume

You can change the volume by pressing VOLk/l on the TV or on the remote control unit.

• To increase the volume, press VOLk.

• To decrease the volume, press VOLl.

Audio status

Output device

Speaker Variable sound Mute

• When "Output Select" is set to "Variable", the indicator on the screen changes as shown below.

Output Select

Fixed Variable

POWER

You can turn on the TV or put it on standby by pressing POWER on the TV or on the remote control unit. (See page 13.)

Changing Channels

You can change channels by pressing CH

• (DOT).

Examples:

To select a 1 or 2-digit channel number (e.g., Channel 5): Press 5 ENT. To select a 3-digit channel number (e.g., Channel 115): Press 1 1 5 ENT. To select a 4-digit channel number (e.g., Channel 22.1):

Press 2 2 • (DOT) 1 ENT.

• When selecting a 1-digit channel number, it is not necessary to press 0 before the number.

• When you enter 0–9 only, channel selection will be made if there is no operation within a few seconds.

• If you push "0" by itself, nothing will happen.

• Complete the above steps within a few seconds.

• When you enter 0–9 and • (DOT), channel selection will be made if there is no operation within a few seconds.

FAVORITE CH

You can select 4 preset favorite channels in 4 different categories. Press A, B, C or D.

• While watching the TV, you can toggle the selected channels by pressing A, B, C and D.

• See page 25 for details of favorite channel settings.

U/V

or 0–9,

• See page 25 for details on the Output Select function.

MUTE

Mutes the current sound output. Press MUTE.

• " " will be displayed on the screen for 40 seconds, and the sound is silenced. The Mute function will not be canceled even after the icon has disappeared.

• Press MUTE or VOLk/l to cancel the function.

• When the Mute function is canceled, the volume returns to the previous level.

Sleep Timer

Allows you to set a time when the TV automatically switches to standby. Press SLEEP.

• The remaining time displays when the sleep timer has been set.

• Each time you press SLEEP, the remaining time switches as shown below.

Off 5 10 15 30 45

240 180 120 90 60

• When set, the time automatically starts counting down.

• If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting.

• When it is 1 minute before the time expires, the remaining time will start to appear.

• Select "Off" by pressing SLEEP to cancel the sleep timer.

•

The TV will enter standby when the remaining time reaches 0.

FLASHBACK

Press FLASHBACK to switch to the previously tuned channel.

• Press FLASHBACK again to switch back to the currently tuned channel.

• FLASHBACK will not work if no channel has been changed after the TV is turned on.

• This function is available only when the input source is TV.

Page 15

Direct Button Operation

AV MODE

AV Mode gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of device connected.

There are seven pre-set AV Modes: STANDARD, MOVIE, GAME, PC, USER, DYNAMIC and DYNAMIC (Fixed). You can use USER Mode to create customized settings for each TV input. These settings will be automatically saved on each input for convenience.

Press AV MODE. Current AV Mode displays.

• Press AV MODE again before the mode displayed on the screen disappears. The mode changes as shown below:

Example: When using the VIDEO or COMPONENT terminals

STANDARD MOVIE GAME USER

DYNAMIC DYNAMIC (Fixed)

Example: When

using the

STANDARD MOVIE GAME USER

PC DYNAMIC DYNAMIC (Fixed)

Example: When using the PC IN terminal

STANDARD USER PC

STANDARD: For a highly deﬁ ned image in normal

lighting.

MOVIE: For a movie. GAME: Lowers image brightness for easier viewing. PC: For PC. USER: Allows the user to customize settings as

described above.

DYNAMIC (Fixed): Changes the image and sound

settings to the factory preset values. No adjustments are allowed.

DYNAMIC: For a clear-cut image emphasizing high

contrast, useful for sports viewing.

HDMI terminals

AUDIO

MTS/SAP stereo mode

■

The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information.

You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.

• Stereo broadcasts: View programs like live sporting events, shows and concerts in dynamic stereo sound.

• SAP broadcasts: Receive TV broadcasts in either MAIN or SAP sound. MAIN sound: The normal program soundtrack (either in mono or stereo). SAP sound: Listen to a second language, supplementary commentary or other information. (SAP is mono sound.)

If stereo sound is difﬁ cult to hear.

• Obtain a clearer sound by manually switching to ﬁ xed mono-sound mode.

You can change MTS as shown below to match the television broadcast signal.

Press AUDIO to toggle between audio modes.

Examples: when receiving MTS and SAP

STEREO mode: STEREO + SAP mode:

MONO mode:

Digital broadcasting audio mode

■

The types of audio transmitted in a digital broadcast include SURROUND as well as MONO and STEREO. In addition, it is possible for multiple audio tracks to accompany a single video track.

Press AUDIO.

• A list of selectable audio is displayed.

Press a/b to select audio.

STEREO MONO

STEREO SAP MONO

MONO

• You can select a different AV Mode for each input, allowing you to optimize your picture quality for different devices. (For example, select STANDARD for watching TV in a normal lighting environment.)

• If power is lost, USER Mode settings may need to be reset.

• MTS only operates while in TV mode.

Page 16

Direct Button Operation

FREEZE

Allows you to capture and freeze a moving image that you are watching. Press FREEZE.

• A moving image is captured.

• Press FREEZE again to cancel the function.

• When this function is not available, "No displaying still image available." will display.

• The still image automatically goes out after 30 minutes.

• If you are using the freeze function and a broadcast activates the V-CHIP BLOCK, the freeze function will be canceled and a V-CHIP BLOCK message will appear.

INPUT

To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.

Press INPUT.

• A list of selectable sources appears.

Press INPUT again or press a/b to select the

input source.

• Each time INPUT is pressed, the input source toggles.

HDMI1

• An image from the selected source automatically displays.

• If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.

• See page 12 for external equipment connection.

• Press PC to switch to an image from the PC.

DISPLAY

PC IN COMPONENT VIDEO

HDMI2 HDMI3

Displays channel information being viewed. Press DISPLAY.

Closed Captions and Digital Closed Captions

Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider.

Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider). It is a more ﬂ exible system than the original Closed Caption system, because it allows for a variety of caption sizes and font styles. When the Digital Closed Caption service is in use, it will be indicated by the appearance of DTVCC.

Not all programs and VHS videotapes offer closed captions. Please look for the “1” symbol to ensure that captions will be shown.

In the Closed Caption system, there can be more than one caption service provided. Each is identiﬁ ed by its own number. The “CC1”, “CC2”, “CC3” and “CC4” services display subtitles of TV programs superimposed over the program's picture.

In the Closed Caption system, the TEXT1, TEXT2, TEXT3 or TEXT4 services display text that is unrelated to the program being viewed (e.g., weather or news). These services are also superimposed over the program currently being viewed.

Press CC.

On: Displays the closed caption. Off: Does not display the closed caption.

• You can adjust the closed caption screen appearance to your preference. (See page 25.)

Allows you to gain quick access to PC mode. Press PC.

Operating On-Screen Display Menu

You can operate the on-screen display menu by using the following buttons. MENU: Displays the menu screen.

a/b/c/d

, ENTER: Select a desired item on the

screen.

RETURN: Returns to the previous menu screen. EXIT: Turns off the menu screen.

• For operating the on-screen display menu, see “Menu Operation Buttons” on page 18.

Page 17

Direct Button Operation

VIEW MODE

You can select the screen size.

Press VIEW MODE to toggle between view modes.

For HD programs

■

Stretch

Dot by Dot (Full Screen) Zoom S.Stretch (Smart stretch)

Suitable for viewing widescreen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at the top and bottom of the screen.

• When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer portions of the screen. Please change view mode to correct this.

For 4:3 programs

■

Example: Screen size images

Side Bar S.Stretch (Smart stretch) Zoom Stretch

Suitable for viewing conventional 4:3 programs in their normal format.

For PC input mode

■

Dot by Dot (1080i/p only):

Detects the resolution of the signal and displays an image with the same number of pixels on the screen.

Full Screen (720p only):

You can select "Full Screen" only when receiving a 720p signal.

Suitable for stretching 4:3 programs to ﬁ ll the screen.

Suitable for viewing widescreen 2.35:1 aspect-ratio programs in full screen.

Suitable for viewing widescreen 2.35:1 anamorphic DVDs in full screen.

Suitable for stretching 4:3 programs to ﬁ ll the screen.

This mode is useful for 1.78:1 DVDs. When viewing 1.85:1 DVDs, stretch mode will still show very thin black bands at the top and bottom of the screen.

• Connect the PC before making adjustments. (See page 12.)

• Selectable screen size may vary with input signal type.

Example: Screen size images

Normal Stretch Dot by Dot

Keeps the original aspect ratio in a full screen display.

An image fully ﬁ lls the screen.

Detects the resolution of the signal and displays an image with the same number of pixels on the screen.

Page 18

On-Screen Display Menu

On-Screen Display Menu Operation

Example

STANDARD

OPC

Backlight

Contrast

Brightness

Color

Tint

Sharpness

Advanced

Reset

RETURN

Picture

On:Display

EXIT ENTER

The bar above is an operational guide for the remote control. The icon of the button operated by the remote control will turn white.

Press MENU to display the MENU screen.

Pressc/d to select the desired menu.

Pressa/b to select a speciﬁ c adjustment item.

Pressc/d(ora/b) to select or adjust the desired setting, and then press ENTER.

Press MENU to exit.

Option

Audio Only

Icon Light Up Setting

Output Select

Color System

Caption Setup

Favorite CH

Fine Sync.

Identiﬁcation

Software Update

Item displayed in light blue

• This indicates the item currently selected.

This indicates the current setting for the item.

Item displayed in white

• This indicates that the item can be selected.

Item displayed in gray

• This indicates that the item cannot be selected. There are various reasons why the items cannot be selected, but the main reasons are as follows:

—Nothing is connected to the selected input terminal. —The function is not compatible with the current input

signal.

• Menu options differ in the selected input modes, but the operating procedures are the same.

• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.

• The order of explanations for each menu item in the following pages is not necessarily in accordance with the alignment of the items on the screen.

Fixed

Auto

Menu Operation Buttons

Using the remote control

Use the following buttons on the remote control to operate the menu.

MENU: Press to open or close the menu screen.

a/b/c/d

ENTER: Press to conﬁ rm the settings of Reset. RETURN: Press to return to the previous step.

: Press to select a desired item on the screen or

adjust a selected item.

Using the control panel of the main unit

You can also operate the menu with the control panel of the main unit. Button operations on the control panel correspond to the ones on the remote control as shown below.

MENU: MENU on the

remote control.

INPUT: ENTER on the

remote control.

U/V

: Cursora/

on the remote control.

VOLk/l: Cursorc/

on the remote control.

Page 19

On-Screen Display Menu

Picture Menu

Adjusts the picture to your preference with the following picture settings.

Example

STANDARD

OPC

Backlight

Contrast

Brightness

Color

Tint

Sharpness

Advanced

Reset

Selected item

Backlight The screen dims The screen

Contrast For less contrast For more contrast Brightness For less

Color For less color

Tint Skin tones

Sharpness For less

• For resetting all Picture adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, pressc/d to select "Yes", and then press ENTER.

AV MODE

The current setting of AV Mode is displayed. (See page 15 for details of AV Mode settings.)

OPC Setting

Automatically adjusts the brightness of the screen.

On:Display: Displays the OPC effect on the screen while

adjusting the brightness of the screen.

On: Automatically adjusts. Off: The brightness is ﬁ xed at the value set in "Backlight".

• When set to "On", the Optical Picture Control (OPC) senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs the OPC sensor, which could affect its ability to sense surrounding light.

• When set to "On:Display", OPC effect displays on the screen while the OPC adjusts the screen brightness.

• The OPC effect on the screen will not be displayed when "Closed Caption" is set to "On", even if you set "OPC" to "On:Display"

Picture

button

brightness

intensity

become reddish

sharpness

On:Display

button

brightens

For more brightness For more color intensity Skin tones become greenish For more sharpness

Advanced Picture Setting

This TV provides various advanced functions for optimizing the picture quality.

Color Temp. (Color Temperature)

For a better white balance, use color temperature correction.

High: White with bluish tone Mid-High: Middle: Mid-Low: Low: White with reddish tone

Motion Enhancement

Use Motion Enhancement to view fast-action video more clearly.

On(High)/On(Low): For obtaining a clearer image. Off: Normal image.

• "Motion Enhancement" may cause image noise. If this occurs, turn the function "Off".

• When AV MODE is set to "GAME" or "PC", or PC format is being input, "Motion Enhancement" is not available.

Film Mode

This function provides high-quality playback of images originally encoded at 24 frames/second, such as ﬁ lms.

Advanced(High)/Advanced(Low): Select a desired level

to remove jerkiness from ﬁ lm contents.

Standard: Detects, analyzes, converts ﬁ lm source. Off: Normal viewing mode.

•

"Film Mode" does not function depending on input signal type.

• "

Film Mode" does not function when you set AV MODE to

GAME" or "PC".

• "

Standard" does not function depending on input signal

type.

Active Contrast

Automatically adjusts the image contrast according to the scene.

On: Automatically adjusts the image contrast. Off: No adjustment.

Digital Noise Reduction

Produces a clearer video image.

Off: No adjustment High/Middle/Low: Select a desired level for viewing a

clearer video image.

Range of OPC

The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of 16 and a minimum of –16.

Max.: –15 through 16 Min.: –16 through 15

• The maximum setting cannot be set to a smaller number than the minimum setting.

• The minimum setting cannot be set to a bigger number than the maximum setting.

•

Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.

Page 20

On-Screen Display Menu

Audio Menu

You can adjust the sound quality to your preference with the following settings.

Example

STANDARD

Treble

Bass

Balance

Surround

Bass Enhancer

Reset

Selected item

Treble For weaker treble For stronger treble Bass For weaker bass For stronger bass Balance Decrease audio

• Audio menu is grayed out when "Output Select" is set to "Variable". (See page 25.)

• For resetting all Audio adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, pressc/d to select "Yes", and then press ENTER.

AV MODE

The current setting of AV Mode is displayed. (See page 15 for details of AV Mode settings.)

Surround

The surround function produces Surround effect from the speakers.

On: Makes it possible to enjoy natural, realistic surround

sound.

Off: Outputs the normal sound.

Audio

button

from the right speaker

button

Off

Decrease audio from the left speaker

Power Control Menu

Power control setting allows you to save energy.

Example

Power Control

No Signal Off

No Operation Off

No Signal Off

This function allows the TV to automatically shut the power down when there is no signal received.

Enable: The power will automatically shut down if there is

no signal for 15 minutes.

Disable: This function does not work.

• When it is 1 minute before the power shuts down, the remaining time will start to appear.

• When a TV program ﬁ nishes, this function may not operate.

No Operation Off

You can set the time length the TV takes to automatically shut the power down when there is no operation.

30 mins/3 hours/Disable

• When it is 1 minute before the power shuts down, the remaining time will start to appear.

Enable

Disable

• Audio menu is grayed out when "Output Select" is set to "Variable". (See page 25.)

• For some discs, setup may be required on your BD/DVD player. In this case, please refer to the operation manual of your BD/DVD player.

Bass Enhancer

This function allows you to enjoy bass-enhanced sound.

On: Bass Enhancer function is on. Off: Normal sound.

• Audio menu is grayed out when "Output Select" is set to "Variable". (See page 25.)

Page 21

On-Screen Display Menu

Setup Menu

Example

Setup

EZ Setup

CH Setup

Input Label

Parental CTRL

PC Audio Select

HDMI Auto View

Audio Setup

Language

Reset

EZ Setup

You can run EZ Setup again, even after setting up the preset channels.

Language: Select from among 3 languages (English,

French and Spanish).

TV Location: Select "Home" or "Store" for the location

where you plan to install the TV. This product qualiﬁ es for ENERGY STAR in Home mode default setting.

Home: AV Mode is set to "STANDARD". Store: AV Mode is set to "DYNAMIC (Fixed)".

• ENERGY STAR qualiﬁ cation is based on AV Mode "STANDARD".

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for

all channels viewable in the set area.

HDMI1

Disable

PCM

English

Input Label

Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Press

to select the new name for the input mode.

c/d

Setting the Names to Your Preference

■

Press c/d to select "Custom".

Press a/b to enter the desired characters.

• You can use alphanumeric characters (including spaces or some symbols) to set the name to your preference.

• If you press b when "Default" is selected, the "Custom" setting display appears.

PC Audio Select

Determines whether the AUDIO input terminal is used for PC IN or HDMI 1.

HDMI1: Select this item when the audio signal is input

via the HDMI 1 terminal using a DVI-HDMI conversion cable.

PC IN: Select this item when the audio signal is input via

the PC IN terminal using an analog RGB cable (D-sub 15-pin cable or VGA cable).

• When "PC Audio Select" is set to "HDMI1", sound will not be produced if you use only an HDMI-certiﬁ ed cable to connect HDMI-compatible equipment. To produce sound, you should make an analog audio connection.

• If you want to connect HDMI-compatible equipment using only an HDMI-certiﬁ ed cable, set "PC Audio Select" to "PC IN".

• See Initial Installation on page 13 for setting each item.

• If no channel is found, conﬁ rm the type of connection made with your TV and try "EZ Setup" again.

CH Setup

If Initial Installation does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for

all channels viewable in the set area.

CH Memory: You can select the channels to skip.

Show/Hide: Removes the checkmarks to let the channels be

skipped.

Signal Strength: The signal strength of DIGITAL channel

is displayed. The signal information is based on the current channel.

• See Initial Installation on page 13 for setting each item.

• If no channel is found, conﬁ rm the type of connection made with your TV and try channel search again.

HDMI Auto View

To watch an HDMI or PC-IN equipment image, select "HDMI1", "HDMI2" or "HDMI3" from the INPUT SOURCE menu using INPUT on the remote control unit or on the TV.

Enable: To use View Mode based on signal recognition,

including an HDMI signal.

Disable: No function.

• Refer to your external equipment operation manual for the signal type.

• When connecting a DVI-HDMI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

Audio Setup

You can output digital audio to an AV ampliﬁ er or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected.

PCM: The optical output terminal outputs audio signal

in PCM form. If your digital audio system does not support Dolby Digital, select "PCM".

Dolby Digital: The optical output terminal outputs audio

signal in Dolby Digital form. It reproduces sound from surround program of digital.

Page 22

On-Screen Display Menu

Language

You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish.

Reset

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

Select "Yes".

• After the reset has been completed, the power shuts off and then comes back on. The screen will have returned to its original settings.

• The Channel Setup settings will not be changed.

• The Language settings will not be changed.

• The Parental CTRL settings will not be changed.

• The TV Location settings will not be changed.

Parental CTRL (Parental Control Setting)

Secret No.

Allows you to use a secret number to protect certain settings from being accidentally changed.

Status

Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not ﬁ rst conﬁ gure your secret number.

On: Enables Parental CTRL. Off: Disables Parental CTRL.

V-Chip

V-CHIP is an electronic ﬁ ltering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not ﬁ rst conﬁ gure your secret number.

Press a/b to select the desired rating system, and

then press d or ENTER.

TV Guidelines

MPAA

Can.English Ratings

Can.French Ratings

IMPORTANT:

Three conditions must be met to enable the V-Chip (see pages 22 to 24):

1. Secret No. is registered.

2. V-Chip/V-Chip (DTV Only) settings have been made.

• The “V-Chip (DTV Only)” will only be selectable when a new rating system can be downloaded via digital broadcasting in the U.S.

3. "Status" is set to "On".

New Secret No.

■

You can set and change the secret number by using

0–9.

Input Secret No.: When you change the secret number,

enter the old 4-digit secret number here. The cursor moves to "New Secret No.".

New Secret No.: When you set the new secret number,

enter the new 4-digit secret number here. The cursor moves to "Reconﬁ rm".

Reconﬁ rm: Enter the same 4-digit number you set in

"New Secret No.".

Secret No. Clear

■

You can clear your secret number.

Yes: Your secret number is cleared. No: Your secret number is not cleared.

Press a/b to adjust the item to your desired

position.

• "Block" indicates the item is blocked.

Press MENU to exit.

• The U.S. has two rating systems for viewing content: TV Parental Guidelines and movie ratings.

• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate television shows from their children.

• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as watched on cable TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.

• The setting automatically enters "Block" for any ratings below your selection.

• If Status is not set to "On", the conﬁ guration settings will not work.

• As a precautionary measure, make a note of your secret number and keep it in a familiar place.

• If the secret number is cleared, the Status setting automatically sets to "Off". "V-Chip" and "Status" will not be selectable from the menu.

Page 23

On-Screen Display Menu

TV Parental Guidelines

■

Example

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

NONE

Block

Example

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

NONE

Block

Pressa/b to adjust the item to your desired position. "Block" indicates the item is blocked. Press MENU to exit.

Block

BlockBlock

When setting an individual content-based rating item:

Press d or ENTER to access blocked content

Block

items from the currently selected age-based rating item.

Pressa/b to select an individual item, and then

press ENTER to unblock it ("Block" is removed). Repeat the same steps for the other items.

Press c or RETURN to register after all individual

content rating items are set.

Content

Rating

FV (Fantasy violence)

(Violence)S(Sexual

situation)

TV-Y (All children)

TV-Y7 (Directed to older children)

Suggested age

TV-G (General audience)

TV-PG (Parental Guidance suggested)

TV-14 (Parents strongly cautioned)

TV-MA (Mature audience only)

: The content rating can be set, but this rating is not normally broadcast by TV stations. : Content rating can be set.

MPAA (Voluntary movie rating system)

■

Example

PG-13

NC-17

NONE

Block

G: General audiences. All ages admitted. PG: Parental guidance suggested. Some material may not be

suitable for children.

PG-13: Parents strongly cautioned. Some material may be

inappropriate for children under 13.

R: Restricted. Under 17 requires accompanying parent or

adult guardian (age varies in some jurisdictions).

NC-17: No one 17 and under admitted. X: X is an older rating that is uniﬁ ed with NC-17 but may be

encoded in the data of older movies.

(Adult

language)

(Sexually

suggestive

dialog)

• Voluntary movie rating system only uses an age-based rating.

Page 24

On-Screen Display Menu

Canadian Rating Systems (Canadian English ratings and Canadian French ratings)

• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming.

• While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.

• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian French ratings.

Canadian English Ratings

■

Example

C8+

14+

18+

Canadian French Ratings

■

Example

8ans+

13ans+

16ans+

18ans+

Block

C: Children: Intended for younger children under the age of 8 years.

Pays careful attention to themes that could threaten their sense of security and well-being.

C8+: Children over 8 years old: Contains no portrayal of violence as the

preferred, acceptable, or only way to resolve conﬂ ict; nor encourage children to imitate dangerous acts which they may see on the screen.

G: General: Considered acceptable for all age groups. Appropriate

viewing for the entire family, contains very little violence, physical, verbal or emotional.

PG: Parental Guidance: Intended for a general audience, but may not

be suitable for younger children (under the age of 8) because it could contain controversial themes or issues.

14+: Over 14 years: Could contain themes where violence is one of

the dominant elements of the storyline, but it must be integral to the development of plot or character. Language usage could be profane and nudity present within the context of the theme.

18+: Adults: Intended for viewers 18 years and older and might contain

depictions of violence, which while related to the development of plot, character or themes, are intended for adult viewing. Could contain graphic language and portrayals of sex and nudity.

E: Exempt programming.

G: General: All ages and children, contains minimal direct violence, but

may be integrated into the plot in a humorous or unrealistic manner.

8ans+: General but inadvisable for young children: May be viewed

by a wide public audience, but could contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real

situations. Recommended for viewing with parent. 13ans+: Over 13 years: Could contain scenes of frequent violent scenes

and therefore recommended for viewing with parent. 16ans+: Over 16 years: Could contain frequent violent scenes and

intense violence. 18ans+: Over 18 years: Only for adult viewing. Could contain frequent

violent scenes and extreme violence.

E: Exempt programming.

How to temporarily release the V-CHIP BLOCK

■

When the V-CHIP BLOCK is working and censors a broadcast, the message "V-CHIP HAS BEEN ACTIVATED." appears and the secret number setting box will be displayed under the message.

• Enter the 4-digit secret number by using 0–9. Now V-CHIP BLOCK is temporarily released.

Reactivating the temporarily released V-CHIP BLOCK

■

You can reactivate the temporarily released V-CHIP BLOCK as shown below.

• Select "Status" setting from the Parental CTRL menu to reactivate BLOCK. (See page 22.)

• Select "V-Chip" setting ("TV Guidelines", “MPAA”, "Can. English Ratings" or "Can. French Ratings") from the Parental CTRL to reactivate BLOCK. (See pages 22 to 24.)

• Switch off the TV power.

• Performing any of the three above will activate the V-CHIP BLOCK.

Page 25

On-Screen Display Menu

Option Menu

Example

Option

Audio Only

Icon Light Up Setting

Output Select

Color System

Caption Setup

Favorite CH

Fine Sync.

Identiﬁcation

Software Update

Audio Only

When listening to music from a music program, you can turn the screen off and enjoy audio only.

On: Audio is output without screen image. Off: Both screen images and audio are output.

• The screen image will return to normal when a button (except those for audio adjustment, such as VOL, MUTE) is pressed.

Icon Light Up Setting

When this function is set to "On", the LED on the front of the TV turns on. If you select "Off" for the function, the conﬁ rmation screen appears. Selecting "Yes" on the screen will turn the LED off.

Fixed

Auto

Basic Selection

You can select a desired Closed Caption.

Off/CC1-CC4/TEXT1-TEXT4

Advanced Selection

You can select a desired service.

Off/Service1-Service6

Setting

Mode

■

Default: The default settings will be displayed. Custom: You can adjust the closed caption screen

appearance to suit your preference. The following items can be adjusted.

Font Style/Font Size/Font Edge/Edge Color/ Font Color/Background Color/Font Opacity/ Background Opacity

Favorite CH (Favorite Channel Setting)

This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily.

To register your favorite channel:

Select "Register" and then press ENTER. Press a/b/c/

to select the position in the category, and then press

ENTER to register.

To delete your favorite channel:

Select "1 Data Clear" and then press ENTER. Press

a/b/c/d

then press ENTER. Select "Yes" and then press ENTER. To delete all the favorite channels, select "All Data Clear".

• Before setting the channel, select the channel you want to register as a favorite channel.

to select the channel you want to delete, and

• "On" is the factory preset value.

Output Select

Allows you to select what controls the audio output.

Fixed: Sound via speaker is adjusted with VOLk/l on

the remote control unit or on the TV.

Sound via the OUTPUT terminal is not adjustable and

outputs at a consistent level.

Variable: Sound via the OUTPUT terminal is adjusted

with VOLk/l on the remote control unit or on the TV.

Sound via speaker is muted.

Color System

Select the video signal system compatible with your equipment from the list below:

Auto/NTSC 3.58/PAL-M/PAL-N

• "Color System" can only be set for the VIDEO.

Caption Setup

Closed Caption

You can switch the Closed Caption modes.

On: Displays the closed caption. Off: Does not display the closed caption.

Fine Sync.

Ordinarily you can easily adjust the picture as necessary to change image position using "Auto Sync.". In some cases, however, manual adjustment is needed to optimize the image.

Selected item Description

H-Position Centers the image by moving it to the

left or right.

V-Position Centers the image by moving it up or

down.

Clock Adjust when the image ﬂ ickers with

vertical stripes.

Phase Adjust when characters have low

contrast or when the image ﬂ ickers.

• For resetting all "Fine Sync." adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, pressc/d to select "Yes", and then press ENTER.

• It is not necessary to adjust the "Clock" or "Phase" when a digital signal is being input, so it cannot be selected.

• The default cursor position may not be in the center, because the screen position variable ranges may be asymmetrical.

Page 26

On-Screen Display Menu

Input Signal (for Analog PC Input Mode Only)

Some input signals may have to be registered manually to display properly. The pair of input signals (resolutions) in the list below is not distinguishable when received. In such a case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.

1024 x 768 1360 x 768

• You can only select the "Input Signal" on the Option menu when receiving one of the 2 input signals listed above.

Auto Sync. (for Analog PC Input Mode Only)

For automatically adjusting the PC image.

Yes: Auto Sync. starts. No: This function does not work.

Press MENU to display the MENU screen, and then

pressc/d to select “Option”.

Press a/b to select “Software Update”, and then

pressd or ENTER.

Example

Option

Audio Only

Icon Light Up Setting

Output Select

Color System

Caption Setup

Favorite CH

Fine Sync.

Identiﬁcation

Software Update

Press c/d to select “Yes”, and then press ENTER

Fixed

Auto

to start updating.

• "Auto Sync." may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing "Auto Sync.".

• Be sure to connect the PC to the TV and switch it on before starting "Auto Sync.".

Identiﬁ cation

The current version of the TV software is displayed.

Software Update

This function allows software updates by inserting a USB memory device with the update ﬁ le into the SERVICE terminal on the TV. To check for the availability of a software update, visit http://www.sharpusa.com/products/support/. If you have any questions, please call 1-800-BE-SHARP (800-237-4277).

CAUTION

• Do not remove the USB memory device or unplug the AC cord while the software is being updated.

• Be sure to properly follow the whole procedure described below, step by step. Otherwise, for example, the TV cannot read the data in the USB memory device and software updating will fail.

Insert the USB memory device with the update ﬁ le

into the SERVICE terminal on the TV.

Start update?

Ye s No

Example

Now updating

26%

CAUTION

• Do not remove the USB memory device or unplug the AC cord while the software is being updated.

When the software is successfully updated, a

screen is displayed indicating that the update process is completed. A few seconds later, the TV restarts automatically.

Example

Software update is complete

100%

• When the software is being updated: The LED on the TV blinks.

• When the software update is completed: The LED on the TV blinks faster.

• If the update has failed, check the ﬁ le in the USB memory device, reinsert the USB memory device correctly, and then try Software Update again.

Remove the USB memory device after the TV has

restarted.

Page 27

Appendix

Troubleshooting

Problem Possible Solution

• No power • Check if you pressed POWER on the remote control unit.

• Unit cannot be operated. • External inﬂ uences such as lightning, static electricity, may cause improper

• Remote control unit does not operate.

• Picture is cut off/with sidebar screen.

• Strange color, light color, or color misalignment

• Power is suddenly turned off. • Is the sleep timer set?

• No sound • Is connection to other components correct?

If the indicator on the TV does not light up, press POWER on the TV.

• Is the AC cord disconnected?

• Has the power been turned on? Page 13

operation. In this case, operate the unit after ﬁ rst turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes.

• Are batteries inserted with polarity (e,f) aligned?

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or ﬂ uorescent lighting?

• Is a ﬂ uorescent light illuminated near the remote control sensor?

• Is the image position correct?

• Are screen mode adjustments such as picture size made correctly? Page 17

• Adjust the picture tone.

• Is the room too bright? The picture may look dark in a room that is too bright.

• Check the power control settings. Page 20

• The unit's internal temperature has increased. Remove any objects blocking vent or clean.

• Is the volume too low? Page 14

• Is “Variable” selected in “Output Select”? Page 25

• Have you pressed MUTE on the remote control unit? Page 14

• Check the audio output of the connected external equipment. Is the volume too low or muted?

• When external equipment is connected via an HDMI cable, you may need to conﬁ gure the audio to be output through the HDMI cable.

• When audio is not output from external equipment connected to the PC IN or HDMI 1 terminal, check the "PC Audio Select" setting. Page 21

• Even when external equipment is connected using an HDMI-certiﬁ ed cable, an audio cable connection may be required depending on the type of equipment and the media being played back. In this case, in addition to connecting an HDMIcertiﬁ ed cable to the HDMI 1 terminal, connect a ø 3.5 mm stereo minijack cable to the AUDIO input terminal and set "PC Audio Select" to "HDMI1". Page 21

• When connecting a PC via an HDMI-certiﬁ ed cable, check the following:

- Is the audio output of the PC conﬁ gured correctly? Check the audio output

settings and output audio format in Sound Properties on the PC. Only PCM format audio can be output. Compressed audio (with a sampling rate of 32kHz, 44.1kHz, or 48kHz) and DTS format audio cannot be output.

- Depending on the board, only video signals may be output. In this case, in addition

to connecting an HDMI-certiﬁ ed cable to the HDMI 1 terminal, connect a ø 3.5 mm stereo minijack cable to the AUDIO input terminal and set "PC Audio Select" to "HDMI1". Page 21

• If you are using a DVI-HDMI conversion cable to connect external equipment to the TV, check the following:

- Is an audio cable connected? The DVI-HDMI conversion cable is for video only.

Connect a ø 3.5 mm stereo minijack cable to listen to the audio.

- Is HDMI 1 being used? When the TV is connected to another HDMI terminal, the

audio and video are not output together even if a ø 3.5 mm stereo minijack cable is connected to the shared AUDIO input terminal for PC IN and HDMI 1.

- Is "PC IN" selected in "PC Audio Select"? Page 21

Page 9

Pages 25 and 26

Page 19

Page 14

Page 12

Page 13

Page 10

Page 28

Appendix

Problem Possible Solution

• No picture • Is connection to other components correct?

• Picture quality of HD programs is poor.

• The TV sometimes makes a cracking sound.

• Is the correct input selected? Page 16

• Is “On” selected in “Audio Only”? Page 25

• If the PC image is not displayed, check the following:

- When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor.

- Check the resolution setting on the PC. Is a non-compatible signal being input?

“PC Compatibility Chart” below

• To enjoy HD images from external equipment, you are required to set up HDMI connection or component connection.

• If the program content is not of HD quality, HD images cannot be displayed. Check that the program you are viewing provides HD images.

• The HD cable/satellite set-top box may need to be conﬁ gured to output HD images via cable/satellite.

• The cable/satellite broadcast may not support a signal resolution of 1080p.

• This is not a malfunction. This happens when the cabinet slightly expands and contracts according to change in temperature. This does not affect the TV's performance.

Page 12

Troubleshooting - Error Message

The example of an error message

displayed on a screen

• Failed to receive broadcast. • Check the antenna cable. Check that the antenna is correctly setup.

Possible Solution

PC Compatibility Chart

It is necessary to set the PC correctly to display XGA and WXGA signal.

PC Horizontal Frequency VESA StandardResolution Vertical Frequency

720 x 400

VGA

XGA 1024 x 768

WXGA 1360 x 768

1080p 1920 x 1080 60 Hz

VGA and XGA are registered trademarks of International Business Machines Corp.

640 x 480

800 x 600SVGA

CLEARING THE SECRET NUMBER

If you forget the secret number, clear the secret number using the following procedure.

Select “Parental CTRL” on the Setup menu to display the secret number screen. (For operating the on-

screen display menu, see page 18.) Press and hold both CHU and VOLk on the TV simultaneously until the message appears on the screen.

31.5 kHz

37.9 kHz

37.5 kHz

35.1 kHz

37.9 kHz

48.1 kHz

46.9 kHz

48.4 kHz

56.5 kHz

60.0 kHz

47.7 kHz

64.0 kHzSXGA 1280 x 1024 60 Hz

67.5 kHz

70 Hz 60 Hz 72 Hz 75 Hz 56 Hz 60 Hz 72 Hz 75 Hz 60 Hz 70 Hz 75 Hz 60 Hz

O O O O O O O O O O O O

The secret number is .

• As a precautionary measure, make a note of your secret number above, and keep it in a safe place.

Page 29

Appendix

Speciﬁ cations

Item Model: LC-70LE600U Model: LC-60LE600U

LCD panel

Size 70o Class (69

Resolution 2,073,600 pixels (1,920 g 1,080)

Diagonal) 60o Class (

TV-standard (CCIR) American TV Standard ATSC/NTSC System

VHF/UHF VHF 2-13ch, UHF 14-69ch

CATV 1-135ch (non-scrambled channel only)

TV Function

Receiving Channel

Digital Terrestrial Broadcast (8VSB)

Digital cable (64/256 QAM)

2-69ch

1-135ch (non-scrambled channel only)

Audio multiplex BTSC System

Audio out 10W g 2

HDMI 1 HDMI in with HDCP, Audio in (ø 3.5 mm stereo minijack)

HDMI 2 HDMI in with HDCP

COMPONENT COMPONENT in

ANALOG RGB (PC) in (15-pin mini D-sub female connector), Audio in (ø 3.5 mm stereo minijack)

Rear

PC IN

ANT/CABLE 75 q Unbalance, F Type g 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)

Terminals

AUDIO Audio in (ø 3.5 mm stereo minijack)

DIGITAL AUDIO OUTPUT

Optical Digital audio output g 1 (PCM/Dolby Digital)

OUTPUT Audio out

HDMI 3 HDMI in with HDCP

Side

VIDEO AV in

SERVICE Software update

OSD language English/French/Spanish

Power Requirement AC 120 V, 60 Hz

Power Consumption 214 W (0.2 W Standby with AC 120 V) 178 W (0.2 W Standby with AC 120 V)

Weight

Dimension

(Wg H g D)

Operating temperature

Emergency alert messages via Cable are unreceivable.

The dimensional drawings are shown on the Spanish operation manual.

TV + stand 84.8 lbs./38.5 kg 61.7 lbs./28.0 kg

TV only 78.3 lbs./35.5 kg 55.1 lbs./25.0 kg

TV + stand 63

TV only 63

32°F to e104°F (0°C to e40°C)

g g

/8 inch 54 17/

/2 inch 54 17/

The width include the operation buttons.

• As part of policy of continuous improvement, SHARP reserves the right to make design and speciﬁ cation changes for product improvement without prior notice. The performance speciﬁ cation ﬁ gures indicated are nominal values of production units. There may be some deviations from these values in individual units.

601/

Diagonal)

/8 inch

/64 inch

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, ofﬁ ce), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.

Storage temperature: f4°F to e140°F (f20°C to e60°C)

Page 30

Information on the Software License for This Product

Software composition

■

The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.

Software developed by SHARP and open source software

■

The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.

Obtaining source code

■

Some of the open source software licensors require the distributor to provide the source code with the executable software components. For information on obtaining the source code for the open source software, and other license agreement information, visit the following website:

http://www.sharpusa.com/software We are unable to answer any questions about the source code for the open source software. The source code for

the software components whose copyrights are held by SHARP is not distributed.

Acknowledgements

■

The following open source software components are included in this product:

• SIL OPEN FONT LICENSE Version 1.0/Bitstream Vera Fonts/LARABIE FONTS

Software Copyrights

■

Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts accompanying

The above copyright and trademark notices and this permission notice shall be included in all copies of

The Font Software may be modiﬁ ed, altered, or added to, and in particular the designs of glyphs or

This License becomes null and void to the extent applicable to Fonts or Font Software that has been

The Font Software may be sold as part of a larger software package but no copy of one or more of the

THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS

Except as contained in this notice, the names of Gnome, the Gnome Foundation, and Bitstream Inc.,

fonts at gnome dot org.

Reserved.

Inc.

this license ("Fonts") and associated documentation ﬁ les (the "Font Software"), to reproduce and distribute the Font Software, including without limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the Font Software, and to permit persons to whom the Font Software is furnished to do so, subject to the following conditions:

one or more of the Font Software typefaces.

characters in the Fonts may be modiﬁ ed and additional glyphs or characters may be added to the Fonts, only if the fonts are renamed to names not containing either the words "Bitstream" or the word "Vera".

modiﬁ ed and is distributed under the "Bitstream Vera" names.

Font Software typefaces may be sold by itself.

OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE GNOME FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.

shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written authorization from the Gnome Foundation or Bitstream Inc., respectively. For further information, contact:

Page 31

Calling for Service

For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.

LIMITED WARRANTY

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the ﬁrst consumer purchaser that this Sharp brand Liquid Crystal Display product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product or if the serial number or model number afﬁxed to the Product has been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may vary. Please contact 1-888-GO-SHARP for further information.

In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of purchase to the servicer, which proof must include the date of purchase.

To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or implied. Speciﬁcally ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulﬁllment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable care, alteration, modiﬁcation, tampering, misuse, improper operation or maintenance or any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.

Model Speciﬁc Section

Your Product Model Number & Description:

Warranty Period for this Product: One (1) year parts and labor from the date of purchase.

Additional Exclusions from Warranty Coverage (if any):

Where to Obtain Service: From a Sharp Authorized Servicer located in the United States. To ﬁnd the location of the

What to do to Obtain Service: Contact your Sharp Authorized Servicer to obtain in home service for this product. The

LC-70LE600U/LC-60LE600U LCD Color Television (Be sure to have this information available when you need service for your Product.)

In order for the Product to be serviced, the Product must be readily available to the servicer, free and clear of any complex or non-standard installation, mounting or other encumbrance which would unreasonably interfere with servicing the Product. The Servicer will remount the Product after service, provided that such remounting is not into a complex or non-standard installation. Any additional labor and materials required to remove and/or reinstall a Product above and beyond the foregoing are not covered by this warranty, may result in additional charges and are the responsibility of the consumer. Image Retention resulting from a ﬁxed image being displayed for long periods of time is not covered by this Limited Warranty (see Operation Manual on how to prevent this).

nearest Sharp Authorized Servicer, please call Sharp toll free at 1-800-BE-SHARP.

Servicer will come to your location and if necessary remove the unit for repair at the Servicer’s facility and return the set to you once completed. Be sure to have Proof of Purchase available.

TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP

OR VISIT www.sharpusa.com

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

SHARP CORPORATION

Page 32

Page 33

Dimensional Drawings

LC-70LE600U

6319/32 (1615)

153/4 (400)

815/32 (215)

(865.62)

(976)

(1009)

(115)

6019/32 (1538.88)

217/64 (536)

(538)

(190)

(400) /

Unit: inch (mm)

Unité: pouce (mm)

Unidad: pulgada (mm)

523/

21/64 (51)

31/2 (89)

(136)

(263)

131/8 (333)

5°

525/ (137)

759/ (201)

(461)20

(512)

LC-60LE600U

5417/32 (1385)

5211/32(1329.12)

(872)

(839)

217/64 (536)

153/4 (400)

(52)

(747.63)

815/32 (215)

(470)

(230)

(400) /

AN-52AG4

6 (169)

(156)

5°

(395)

(442)

/64 (27.9)

259/64 (74)

(146)

131/8 (333)

417/

(115)

Active area/Área activa/Zone active

Thinnest part/Parte más delgada/Partie la plus mince

AN-52AG4