Sharp Aquos LC-42BX5H Operation Manual

Download

Page 1

LC-42BX5H

LCD COLOUR TELEVISION

液晶彩色電視機

ENGLISH

OPERATION MANUAL

使用說明書

LC-42BX5H

OPERATION MANUAL

使用說明書

中文 (繁體)中文 (簡體)

Page 2

Page 3

LC-42BX5H

LCD COLOUR TELEVISION

ENGLISH

OPERATION MANUAL

Dear SHARP customer

Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product.

Contents

ENGLISH

Dear SHARP customer ........................................... 1

Contents .................................................................. 1

Trademarks ............................................................. 2

Important Safety Precautions ............................... 3

Supplied accessories ............................................. 4

Preparation ............................................................. 5

Inserting the batteries ......................................... 5

Using the remote control unit .............................. 5

Cautions regarding remote control unit ........... 5

Setting the TV ..................................................... 6

Protection against overturning ............................ 7

Basic connection ................................................ 8

Connecting to an antenna .............................. 8

Connecting to the AC outlet ........................... 8

Setting the TV on the wall ................................... 9

Removing the stand ............................................ 9

Part names .............................................................10

TV (Front) ...........................................................10

TV (Rear) ............................................................11

Remote control unit ...........................................12

Watching TV ...........................................................13

Turning on the power .........................................13

Turning off the power .........................................13

Simple button operations for changing

channels ..........................................................13

Using Flashback (A) on the remote

control unit ......................................................14

Using MPX on the remote control unit ................14

Simple button operation for changing

volume/sound .................................................15

Sleep timer ........................................................15

Still image ..........................................................15

Basic adjustment settings ....................................16

Menu operation buttons .....................................16

On-Screen Display .............................................16

TV/AV input mode menu items ..........................17

PC input mode menu items ...............................17

Auto installation .................................................18

Programme setup ..............................................18

Auto search ...................................................18

Manual setting for each channel ....................19

Search tuning ...........................................19

Fine tuning ................................................19

Colour system ..........................................19

Sound system (Broadcasting system) ...... 20

Skipping channels ................................... 20

Sort .............................................................. 20

Label ............................................................ 21

Erase Programme ........................................ 21

AV mode selection ............................................ 22

OPC (Optical Picture Control) setting ................ 22

Picture adjustments .......................................... 23

Advanced ......................................................... 24

C.M.S. (Colour Management System) .......... 24

Colour temperature ...................................... 24

3D-Y/C ........................................................ 24

Film mode .................................................... 25

I/P setting ..................................................... 25

AV mode selection ............................................ 26

Audio adjustment .............................................. 26

Surround ...................................................... 26

Page 4

Contents

Useful adjustment settings .................................. 27

Password setting for child lock

(for TV input mode) ........................................ 27

Input Label ........................................................ 28

Image position .................................................. 28

WIDE mode (for TV/AV input mode) .................. 29

WIDE mode (for PC input mode) ....................... 30

Language setting for on-screen display ............. 31

Audio Only ........................................................ 32

DNR (Digital Noise Reduction) ........................... 32

Input Select ...................................................... 32

Blue Screen ...................................................... 33

Colour system setting ....................................... 33

Power Control .................................................. 34

HDMI Setup ...................................................... 35

PC Setup .......................................................... 35

Input Signal (PC input mode only) ................. 35

Auto Sync adjustment

(PC input mode only) .................................. 36

Fine Sync. adjustment

(PC input mode only) .................................. 36

Useful features ..................................................... 37

Dual screen functions ....................................... 37

Using external equipment .................................... 38

Displaying an external equipment image .......... 38

Displaying a DVD image (Example) ................... 38

Connecting a VCR ........................................... 38

Connecting a DVD player ................................. 39

Connecting a game console or camcorder ....... 39

Connecting an HDTV tuner ............................... 40

Viewing an image from a PC ............................. 41

Connecting a PC .......................................... 41

Displaying an image from a PC ..................... 41

Appendix ............................................................... 42

Troubleshooting ................................................ 42

PC compatibility chart ....................................... 42

RS-232C port speciﬁ cations ............................. 43

Speciﬁ cations ................................................... 45

Optional accessories ........................................ 45

Dimensional drawings.......................................... 46

Trademarks

• “HDMI, the HDMI logo and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

Page 5

Important Safety Precautions

• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.

• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.

• Do not place vases or any other water-ﬁ lled containers on this product.

The water may spill onto the product

causing ﬁ re or electric shock.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the manufacturer.

• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.

• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including ampliﬁ ers).

• To prevent ﬁ re, never place any type of candle or naked ﬂ ames on the top or near the TV set.

• To prevent ﬁ re or shock hazard, do not place the AC power cord under the TV set or other heavy items.

• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special care near children and pets.

• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven ﬂ oor surface can cause the product to fall from the cart.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufﬁ cient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's instructions are followed.

The LCD panel is a very high technology product with 3,147,264 thin ﬁ lm transistors, giving you ﬁ ne picture details. Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a ﬁ xed point of blue, green or red. This is within product speciﬁ cations and does not constitute a fault.

Precautions when transporting the TV

Be sure to always carry the TV by two people holding it with two hands — one hand on each side of the TV.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• Install the product on the place where the AC cord can be unplugged easily from the AC outlet, or from the AC INPUT terminal on the rear of the product.

Page 6

Supplied accessories

Make sure the following accessories are provided with the product.

Remote control unit “AAA” size battery (g2) AC cord

Page 12 Page 5 Page 6

Cable clamp Cable clamp Operation manual

Page 6 Page 6

Safety restraints

Restraining band

NOTE

• Always use the AC cord supplied with the TV.

• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.

Screw for band

Clamps Screws for

clamps

Page 7

Preparation

Inserting the batteries

Before using the TV for the ﬁ rst time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.

1 Open the battery cover.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you ﬁ nd any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.

2 Insert two supplied “AAA” size

batteries.

• Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

3 Close the battery cover.

Using the remote control unit

Use the remote control unit by pointing it towards the remote sensor window. Objects between the remote control unit and sensor window may prevent proper operation.

Remote control sensor

Cautions regarding remote control unit

• Do not subject the remote control unit to shock. In addition, do not soak the remote control unit with liquids, or place it in an

area with high humidity.

• Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the unit.

• The remote control unit may not work properly if the remote sensor window of the TV is under direct sunlight or strong lighting. In such case, change the angle of the lighting or TV, or operate the remote control unit closer to the remote sensor window.

5 m

30°30°

Page 8

Preparation

Setting the TV

Notes on installing the TV

• Avoid direct sunlight and place the TV in a well-ventilated location.

• Place the TV in a level location.

Removing the terminal cover

TV (rear view)

Press down the hooks to remove the cover toward you.

Connecting the AC cord, antenna, and external equipment to the TV

See pages 8 and 38—41 for connecting antennas and external equipment, such as VCR and DVD player.

AC cord

AC outlet

• Place the TV close to the AC outlet, and keep the power plug within reach.

Bundling the cables and closing the terminal cover

Insert the cable clamp in the hole on the TV as shown.

Cable clamp

CAUTION

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.

CAUTION

Adjust the screen with both hands. Put one hand on the TV and rotate the screen while steadying the stand with your other hand.

The TV can be rotated up to 10 degrees to the right or left.

Cable clamp

Page 9

Preparation

Protection against overturning

There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-resistant measurement for your safety.

Anchoring the TV to the wall or a pillar

Fix the product with the 2 clamps (supplied),

using the screws (supplied).

Fix the TV to the wall using extra strong ties

(commercially available).

Cup hook (commercially available)

Screws for attaching clamps (supplied)

View from the top

Tie (commercially available)

Wall

Clamps (supplied)

Fixing the TV to the table

Lay the TV down on cushioning (such as a

blanket) over a table.

Attach the band (supplied) to the bottom of the

stand using the screw (supplied).

Transfer the product to the table where you

intend to ﬁ x the TV.

Fix the TV to the table by the band with a

screw (commercially available).

• Use a screw (commercially available) whose shape is compatible with the band.

Thick soft cloth (e.g. Blanket)

Restraining

band

(supplied)

Restraining

band

(supplied)

Stand

Table

Screw (supplied)

Screw (commercially available)

Table

CAUTION

• As this product is heavy, use a table that is wide enough to support the product and capable of withstanding the product's weight. The table should be set where it will not be overturned.

Page 10

Preparation

Simple operations for watching a TV programme

Basic connection

Connecting to an antenna

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable.

Standard DIN45325 plug (IEC169-2) 75-ohm coaxial cable (round cable)

(commercially available)

To antenna terminal Room antenna terminal (75-ohm type)

Connecting to the AC outlet

Antenna cable

Rear view

AC outlet

NOTE

• Always turn off the power of the TV when connecting the AC cord.

• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.

Page 11

Preparation

Setting the TV on the wall

• You can mount the TV on the wall, using the optional AN-37AG2/AN-52AG1 bracket.

• For details, refer to the instructions supplied with the optional bracket.

CAUTION

• This TV should be mounted on the wall only with the AN-37AG2/AN-52AG1 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

• Installing the Liquid Crystal Television requires special skill that should only be performed by qualiﬁ ed service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Hanging on the wall

About setting the TV angle and height adjustment

AN-37AG2/AN-52AG1 wall mount bracket. (See the bracket instructions for details.)

Vertical mounting

Angular mounting

0° or 5°

AN-37AG2

AN-52AG1

Removing the stand

For wall mounting with the optional bracket, remove the stand.

Before attaching/detaching stand

• Before detaching (or attaching) stand, unplug the AC cord from the AC outlet.

• Remove all terminal covers and connected cables.

• Lay the TV down on cushioning (such as a blanket) over a table.

• Make sure two or more people perform the operation.

CAUTION

• Do not remove the stand from the TV unless using an optional bracket to mount it.

For AN-52AG1

0°/5°/10°/15°/20°

-5/0/+5 cm

(can be moved 5 cm

up or down)

Unfasten the two screws used to secure the cover in place.

NOTE

• To attach the stand, perform the above steps in reverse order.

Unfasten the four screws used

to secure the stand in place. Pull the stand several

centimetres toward you.

Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)

Page 12

Part names

TV (Front)

Channel up (r)/down (s) buttons

Volume up (e)/down (f) buttons

TV/VIDEO button

POWER (On/Off) button

Remote control sensor

OPC sensor

POWER indicator

Regarding the headphone jack

• Use headphones with a stereo mini plug (Ø 3.5 mm).

• Be sure to unplug headphones from the jack when they are not in use.

• The speakers do not output volume when headphones are plugged in.

• Audio adjustments (page 26) do not affect the audio of connected headphones.

• You can set the volume to different levels for each input source.

Headphone jack

OPC indicator*

SLEEP timer indicator

*OPC: Optical Picture Control

(See page 22.)

Volume display when headphones are plugged in

Page 13

Part names

TV (Rear)

RS-232C terminal

PC INPUT terminals

INPUT 5 (HDMI) terminals

INPUT 4 (HDMI) terminals

INPUT 1 terminals

INPUT 2 terminals

MONITOR OUTPUT

terminals

Antenna input terminal

AC INPUT terminal

INPUT 3 terminals

Page 14

Part names

Remote control unit

POWER (STANDBY/ON)

To switch the power on and off. (See page 13.)

0 — 9

Set the channel. (See page 13.)

(Flashback)

Press to return to the previous image in normal viewing mode. (See page

14.)

MPX

Select the sound multiplex mode. (See page 14.)

Set the volume. (See page 15.)

VOLk/VOL

Mute the sound. (See page 15.)

(Mute)

SURROUND

Select Surround settings. (See page

26.)

Select a desired item on the setting

a/b/c/d

screen. (See page 16.)

(Cursor)

TV/VIDEO (INPUT SOURCE)

Select an input source. (TV, INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, PC) (See pages 32, 38 and 41.)

DISPLAY

Display the programme information.

CHr/CH

TV input mode: Select the channel. (See page 13.)

SLEEP

Set the Sleep timer. (See page 15.)

Display the menu screen. (See page

16.)

ENTER

Execute a command.

Return to the default screen.

WIDE

EXIT

Change the wide image mode. (See pages 29 and 30.)

FREEZE

Freeze a motion picture on the screen. (See pages 15 and 37.)

NOTE

• When using the remote control unit, point it at the TV.

RETURN

MENU mode: Return to the previous menu screen. (See page 16.)

SELECT

To select either screen to be active in Dual screen mode.

P&P

Set the dual picture mode. Press P&P again to return to normal view. (See page 37.)

Page 15

Watching TV

Turning on the power

Press POWER on the TV.

• POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.)

• After turning the power “ON” by pressing POWER on the TV, you can turn the power ON/OFF by pressing POWER on the remote control.

POWER button

POWER indicator

Turning off the power

Press POWER on the remote control.

• The TV enters standby mode and the image on the screen disappears.

• The POWER indicator on the TV changes from green to red.

Press POWER on the TV.

• The POWER indicator on the TV turns off.

• When the TV is turned off by POWER on the TV, you cannot turn on the power by pressing POWER on the remote control.

Simple button operations for changing channels

You can change channels in several ways.

Using CHr/s on the remote control unit

• Press CHr to increase the channel number.

• Press CHs to decrease the channel number.

NOTE

• CHr/s on the TV operates the same as CHr/s on

the remote control unit.

Using 0 — 9 on the remote control unit Select the channels directly by pressing buttons 0 to 9.

POWER indicator

Off Power off

The TV is in standby mode.Red

The TV is on.Green

NOTE

• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.

• Minor power is consumed when the unit is in standby mode.

POWER button

To select a 1-digit channel (e.g. channel 2):

• Press 0, followed by 2. To select a 2-digit channel (e.g. channel 12):

• Press 1, followed by 2.

Channel display

Channel display changes approximately after 3 seconds as shown below.

(Example)

SAT.1

PAL B/G

MONO

Page 16

Watching TV

Using Flashback (A) on the remote control unit

Press A to switch the currently tuned channel to the previously tuned channel. Press A again to switch back to the currently tuned channel.

Press A to toggle between the currently selected input source and the previously selected one.

Using MPX on the remote control unit

When receiving a monaural signal

Each time you press MPX, the mode switches between NICAM MONO and MONO.

Monaural mode

BBC2

NICAM

MONO

BBC2

MONO

In the TV mode of A2 TV broadcasts When receiving a stereo signal

Each time you press MPX, the mode switches between STEREO and MONO.

Stereo mode

BBC2

STEREO

BBC2

MONO

When receiving a bilingual signal

Each time you press MPX, the mode switches among CH A, CH B and CH AB.

Bilingual mode

BBC2

In the NICAM TV broadcasts When receiving a stereo signal

Each time you press MPX, the mode switches between NICAM STEREO and MONO.

Stereo mode

BBC2

NICAM

STEREO

BBC2

MONO

When receiving a bilingual signal

Each time you press MPX, the mode switches among NICAM CH A, NICAM CH B, NICAM CH AB and MONO.

Bilingual mode

BBC2

NICAM

CH A

BBC2

NICAM

CH B

CH A

BBC2

CH AB

CH B

When receiving a monaural signal When you press MPX, “MONO” displays.

Monaural mode

BBC2

MONO

NOTE

• “BBC2” and “99” are tentative network name and channel.

BBC2

MONO

BBC2

NICAM

CH AB

Page 17

Watching TV

Simple button operation for changing volume/sound

Changing the volume

You can change the volume on the TV or on the remote control unit.

• To increase the volume, press VOLk.

• To decrease the volume, press VOLl.

NOTE

• Within 30 minutes after pressing e, press one of the buttons below to cancel the mute. — VOLl/VOL —

• Mute will be cancelled after 30 minutes. However, the TV will not suddenly output loud sound as the volume level will be set to 0 automatically. Increase the volume level by pressing VOLk.

Press e again within 30 minutes to cancel the

mute.

• Before 30 minutes, the volume level returns to the

previous setting.

Sleep timer

Allows you to set a time when the TV automatically switches to standby.

Press SLEEP.

• Remaining time displays when sleep timer has been set.

Sleep Timer: Remain 2 hr. 00 min.

Each time you press SLEEP, the remaining

time switches as shown below.

0 hr. 30 min. 1 hr. 00 min. 1 hr. 30 min.

Off

2 hr. 30 min. 2 hr. 00 min.

NOTE

• “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4”, “INPUT5” and “PC” modes can store volume adjustment values separately.

Using Mute (e) on the remote control unit

mutes the current sound output.

Press e.

• The sound is silenced.

• “M” has been displayed on the screen for 30 minutes.

Mute

NOTE

• When the time has been set, countdown automatically starts.

• Five minutes before the preset of time expires, the remaining time displays each minute.

• Select “Off” by pressing SLEEP to cancel the sleep timer.

Still image

You can freeze a motion picture on the screen.

Press FREEZE.

Press RETURN to exit still image.

NOTE

• When this function is not available, “No still image available.” will display.

• The still image automatically goes out after 30 minutes.

Page 18

Basic adjustment settings

Menu operation buttons

Use the following buttons on the remote control to operate the menu.

On-Screen Display

(Example)

...

[

Option

Audio Only

DNR

Input Select

Blue Screen

Colour System

Power Control

HDMI Setup

PC Setup

Item displayed in yellow

Colour System

• This indicates the item currently selected.

• Press ENTER to go to the adjustment screen for this

item.

Item displayed in white

• This indicates an item can be selected.

Item displayed in grey

• This indicates that the item cannot be selected. * There are various reasons why items cannot be

selected, but the main reasons are as follows:

1. Nothing is connected to the selected input terminal.

2. The function is not compatible with the current input signal.

]

MENU: Press to open or close the menu screen.

a/b/c/d

: Press to select a desired item on the

screen or adjust a selected item.

ENTER: Press to go to the next step or complete

the setting.

RETURN: Press to return to the previous step.

ENTER

: Select : Enter

RETURN

: Back

: Exit

The bar above is an operational guide for the remote control. The bar will change in accordance with each menu setting screen.

NOTE

• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.

Page 19

Basic adjustment settings

TV/AV input mode menu items

List of TV/AV menu items to help you with operations

Picture

AV Mode ...................................................................... Page 22

OPC .............................................................................. Page 22

Backlight ..................................................................... Page 23

Contrast ....................................................................... Page 23

Brightness ................................................................... Page 23

Colour .......................................................................... Page 23

Tint ............................................................................... Page 23

Sharpness ................................................................... Page 23

Advanced

C. M. S. ............................................................ Page 24

Colour Temp. ................................................... Page 24

3D-Y/C* ............................................................ Page 24

Film Mode* ...................................................... Page 25

I/P Setting* ...................................................... Page 25

Audio

AV Mode ...................................................................... Page 26

Treble ........................................................................... Page 26

Bass ............................................................................. Page 26

Balance ........................................................................ Page 26

Surround ...................................................................... Page 26

Setup

Auto Installation** ....................................................... Page 18

Programme Setup** ............................................Pages 18-21

Child Lock** ................................................................ Page 27

Input Label*** .............................................................. Page 28

Position ........................................................................ Page 28

Language ..................................................................... Page 31

Option

Audio Only ................................................................... Page 32

DNR* ............................................................................ Page 32

Input Select

Input1 ............................................................... Page 32

Input2 ............................................................... Page 32

Input3 ............................................................... Page 32

Blue Screen ................................................................. Page 33

Colour System ............................................................ Page 33

Power Control

No Signal Off ................................................... Page 34

No Operation Off ............................................. Page 34

HDMI Setup

Signal Type ...................................................... Page 35

Colour Matrix................................................... Page 35

Auto View ......................................................... Page 35

Audio Select .................................................... Page 35

PC input mode menu items

List of PC menu items to help you with operations

Picture

AV Mode ...................................................................... Page 22

OPC .............................................................................. Page 22

Backlight ..................................................................... Page 23

Contrast ....................................................................... Page 23

Brightness ................................................................... Page 23

Advanced

C. M. S. ............................................................ Page 24

Colour Temp. ................................................... Page 24

Audio

AV Mode ...................................................................... Page 26

Treble ........................................................................... Page 26

Bass ............................................................................. Page 26

Balance ........................................................................ Page 26

Surround ...................................................................... Page 26

Setup

Input Label .................................................................. Page 28

Language ..................................................................... Page 31

Option

Audio Only ................................................................... Page 32

Input Select

Input1 ............................................................... Page 32

Input2 ............................................................... Page 32

Input3 ............................................................... Page 32

Power Control

No Operation Off ............................................. Page 34

Power Management ....................................... Page 34

PC Setup

Input Signal...................................................... Page 35

Auto Sync. ....................................................... Page 36

H-Position ........................................................ Page 36

V-Position ........................................................ Page 36

Clock ................................................................ Page 36

Phase ............................................................... Page 36

NOTE

*: Not selectable when using INPUT4 or INPUT5 **: Not selectable when using INPUT1 to INPUT5. ***: Not selectable when using TV.

• When inputting external equipment signals, “Colour System” can be set only when using INPUT1 to INPUT3.

• “Audio Select” can be set only when using INPUT4.

Page 20

Basic adjustment settings

Auto installation

You can run auto installation again, even after setting up the preset channels.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Auto Installation”, and

then press ENTER.

...

[

Setup

Setup Option

Auto Installation

Programme Setup

Child Lock

Input Label

Position

Language

If you have already set the password, enter it

here.

• See page 27 for setting a password.

Auto Installation

]

Programme setup

You can run the auto search procedure again at any time by accessing the Setup menu and Programme Setup. Channels can be tuned automatically or manually.

Auto search

You can also automatically search by performing the procedure below. This is the same function as programme auto search in auto installation.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Programme Setup”, and

then press ENTER. If you have already set the password, enter it here.

• See page 27 for setting a password.

...

[

Setup

Setup Option

Auto Installation

Programme Setup

Child Lock

Input Label

Position

Language

Press a/b to select “Auto Search”, and then

press ENTER.

Programme Setup

]

Press a/b to select “Yes”, and then press

ENTER.

Press a/b to select the desired language

listed on the screen, and then press ENTER. Press a/b to select the desired sound system, and then press ENTER. You do not need to do anything during the auto search. “Search is completed.” is displayed. Press MENU to exit.

Press a/b to select “Yes”, and then press

ENTER.

Press a/b to select the desired sound system, and then press ENTER. “Search is completed.” is displayed. Press

MENU to exit.

Page 21

Basic adjustment settings

Manual setting for each channel

You can set some channel items manually. They are Search, Fine (TV frequency), Colour System, Sound System, and Skip.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Programme Setup”, and

then press ENTER. If you have already set the password, enter it here.

• See page 27 for setting a password.

Press a/b to select “Manual Adjust”, and

then press ENTER.

Press a/b to select “Yes”, and then press

ENTER.

Programme Setup “Manual Adjust” menu

01 SAT.1 02 PR07 03 KABEL

Fine tuning

Press a/b/c/d to select the channel you

want to edit, and then press ENTER.

• The selected channel information displays.

Press a/b to select “Fine”, and then press

ENTER.

Press c/d to adjust the frequency, and then

press RETRUN or MENU.

• Adjust while checking the background picture as a reference.

Fine

Colour System

Sound System

Skip

• Instead of the method above, you can also set by directly entering the frequency number of the channel with 0 — 9.

• When setting a frequency on the “Fine” screen, the last ﬁ gure of the frequency needs to be “0” or “5”.

• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.

• 49.25 MHz: Press 0 s 4 s 9 s 2 s 5.

179.25 MHz

You can select one of the following settings.

Search (See page 19.)

Fine (See page 19.)

Colour system (See page 19.)

Sound system (See page 20.)

Skip (See page 20.)

Search tuning

Press a/b/c/d to select the channel you

want to edit, and then press ENTER.

• The selected channel information displays.

Press a/b to select “Search”, and then press

ENTER.

...

[

Setup

Fine

Colour System

Sound System

Skip

Programme Setup

]

179.25 MHz

Colour system

Press a/b/c/d to select the channel you

want to edit, and then press ENTER.

• The selected channel information displays.

Press a/b to select “Colour System”, and

then press ENTER.

• Receivable colour systems are listed.

Fine

Colour System

Sound System

Skip

Press a/b to select the optimum colour

system, and then press ENTER.

Colour system menu

AUTO

PAL

SECAM

NTSC 3.58

NTSC 4.43

PAL-60

As ENTER is pressed, the next channels will

be searched in order.

Page 22

Basic adjustment settings

Manual setting for each channel (continued)

Sound system (Broadcasting system)

Press a/b/c/d to select the channel you

want to edit, and then press ENTER.

• The selected channel information displays.

Press a/b to select “Sound System”, and

then press ENTER.

• Receivable sound systems (Broadcasting systems) are listed.

Sound system menu

...

[

Setup

Fine

Colour System

Sound System

Skip

Press a/b to select the optimum sound

system, and then press ENTER.

Programme Setup

NOTE

• Check the sound system if the sound output were not correct.

Skipping channels

Channels with “Skip” set to “On” are passed over when using CHr/s even if selected while watching the image from the TV.

Press a/b/c/d to select the channel you

want to edit, and then press ENTER.

• The selected channel information will be displayed.

]

B/G

D/K

Sort

Channel positions can be sorted freely.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Programme Setup”, and

then press ENTER. If you already set the password, enter it here.

• See page 27 for setting a password.

Press a/b to select “Sort”, and then press

ENTER.

Press a/b to select “Yes”, and then press

ENTER.

Press a/b/c/d to select the channel you

want to move, and then press ENTER.

Move it to the desired position by pressing

a/b/c/d

• Please be aware that the neighboring channels are switched during this procedure.

(Example) When moving channel 10 to channel 4's position.

, and then press ENTER.

04 05

09 10

button

Press a/b to select “Skip”, and then press

ENTER.

• Skip menu displays.

Skip menu

Fine

Colour System

Sound System

Skip

Press a/b to set “Skip” to “On”, and then

press ENTER.

Off

04 10

09 05

button

10 04

09 05

Repeat the steps 6 and 7 until all desired

channels are sorted.

04 05

10 09

10 05

04 09

button

Page 23

Basic adjustment settings

Label

Channels can be labelled freely.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Programme Setup”, and

then press ENTER. If you already set the password, enter it here.

• See page 27 for setting a password.

Press a/b to select “Label”, and then press

ENTER.

Press a/b to select “Yes”, and then press

ENTER.

Press a/b/c/d to select the channel you

want to label, and then press ENTER.

Press a/b to select characters and c/d

to move to the desired digit, and then press

ENTER to complete the label setting.

Erase Programme

The individual programme can be erased.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Programme Setup”, and

then press ENTER. If you already set the password, enter it here.

• See page 27 for setting a password.

Press a/b to select “Erase Programme”, and

then press ENTER.

Press a/b to select “Yes”, and then press

ENTER.

Press a/b/c/d to select the channel you

want to erase, and then press ENTER.

Press ENTER to erase the channel.

All the subsequent programmes move up.

Repeat the steps 6 and 7 until all desired

channels are erased.

Erase programme menus

SAT.1 Pro702 KABEL03 04 05

06 07 08 09 10

11 12 13 14 15

16 17 18 19 20

01 SAT.1 03 KABELPro702

06 07 08 09 10

11 12 13 14 15

16 17 18 19 20

01 SAT.1 02 KABEL

06 07 08 09 10

11 12 13 14 15

16 17 18 19 20

04 05

03 04 05

Page 24

Basic adjustment settings

AV mode selection

AV mode gives you ﬁ ve viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of programme watched or the type of image input from external equipment.

Press MENU and the MENU screen displays.

Press c/d to select “Picture”.

Press a/b to select “AV Mode”, and then

press ENTER.

Press a/b to select the desired item, and

then press ENTER.

Selected item

STANDARD

MOVIE

GAME

USER

DYNAMIC

NOTE

• You can select a different AV MODE item for each input mode. (For example, select STANDARD for TV input and DYNAMIC for VIDEO input.)

• During PC input mode, only “STANDARD” and “USER” can be selected under the AV mode selection.

For a highly deﬁ ned image in a normally bright room

For a movie

Lowers image brightness for easier viewing.

Allows the user to customise settings as desired. You can set the mode for each input source.

For a clear-cut image emphasising high contrast for sports viewing

Description

OPC (Optical Picture Control) setting

You can set the TV to automatically adjust the screen to suitable backlight brightness according to the lighting conditions.

Press MENU and the MENU screen displays.

Press c/d to select “Picture”.

Press a/b to select “OPC”, and then press

ENTER.

Press a/b to select the desired item, and

then press ENTER.

Selected item

Off

On (Display)

NOTE

• Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

The brightness is ﬁ xed at the value set in “Backlight” (See page 23).

Automatically adjusts

Displays the OPC effect on the screen while adjusting the brightness of the screen.

Description

Page 25

Basic adjustment settings

Picture adjustments

You can adjust the picture to your preference.

Follow the steps to adjust the picture.

Press MENU and the MENU screen displays.

Press c/d to select “Picture”.

Press a/b to select a speciﬁ c adjustment

item.

Press c/d to adjust the item to your desired

position.

NOTE

• For resetting all adjustment items to factory preset values, pressa/b to select “Reset”, press ENTER, press a/b to select “Yes”, and then press ENTER.

• “Backlight” cannnot be adjusted when “OPC” is set to “On” or “On (Display)”.

Picture Audio

AV Mode [STANDARD]

OPC

Backlight [+ 6]

Contrast

Brightness

Colour

Tint

Sharpness

Advanced

Reset

Selected item

Backlight

Contrast

Brightness

Colour

Tint

Sharpness

Adjustments items

[

]

Picture

[Off]

[ 30]

[ 0]

button

The screen dims

For less contrast

For less brightness

For less colour intensity

Skin tones become purplish

For less sharpness

button

The screen brightens

For more contrast

For more brightness

For more colour intensity

Skin tones become greenish

For more sharpness

NOTE

• Select “Advanced” and then press ENTER to set “C.M.S”,

“Colour Temp.”, “3D-Y/C”, “Film Mode” or “I/P Setting”. See pages 24 and 25.

Page 26

Basic adjustment settings

Advanced

Advanced setting enables you to set the picture adjustment in more detail. There are ﬁ ve options you can choose from.

C.M.S. (Colour Management System)

Colour tone is managed using the six-colour adjustment setting.

Press MENU and the MENU screen displays.

Press c/d to select “Picture”.

Press a/b to select “Advanced”, and then

press ENTER.

Press a/b to select a speciﬁ c adjustment

item among “C.M.S.-Hue”, “C.M.S.-Saturation” and “C.M.S.-Value”, and then press ENTER.

C. M. S. _ Hue

C. M. S. _ Saturation

C. M. S. _ Value

Colour Temp.

3D - Y/C

Film Mode

I/P Setting

Press c/d to adjust the item to your desired

position.

Reset

[ 0]

NOTE

• For resetting all adjustment items to factory preset values, press a/b to select “Reset”, and then press ENTER.

Colour temperature

Adjusts the colour temperature to give the best white image.

Repeat steps 1 to 3 in C.M.S. (Colour

Management System).

Press a/b to select “Colour Temp.”, and then

press ENTER.

Press a/b to select the desired level, and

then press ENTER.

Selected item

High

Mid-High

Middle

Mid-Low

Low

Description

White with bluish tone

White with reddish tone

3D-Y/C

Provides high quality images with minimal dot crawl and cross colour noise.

Repeat steps 1 to 3 in C.M.S. (Colour

Management System).

Press a/b to select “3D-Y/C”, and then press

ENTER.

C. M. S. _ Hue

C. M. S. _ Saturation

C. M. S. _ Value

Colour Temp.

3D _ Y/C

Film Mode

I/P Setting

Off

Standard

Fast

Slow

Selected item

C.M.S-Hue

This is a standard to adjust the colour

Description

either more reddish or more bluish in tone.

C.M.SSaturation

C.M.S-Value

Increases or decreases the saturation of a selected colour.

A higher value makes the image brighter. A lower value makes the image darker.

Press a/b to select the desired level, and

then press ENTER.

Selected item

Off

Standard

Fast

Slow

3D-Y/C off

Normal adjustment

For movie image

For still image

Description

NOTE

• “3D-Y/C” is not selectable depending on the input signal type.

• 3D-Y/C may not operate depending on the input signal type or noisy input signal.

Page 27

Basic adjustment settings

Film mode

Automatically detects a ﬁ lm-based source (originally encoded at 24/25 frames/second, depending on the vertical frequency), analyses it then recreates each still ﬁ lm frame for high-deﬁ nition picture quality.

Press MENU and the MENU screen displays.

Press c/d to select “Picture”.

Press a/b to select “Advanced”, and then

press ENTER.

Press a/b to select “Film Mode”, and then

press ENTER.

Press a/b to select “On”, and then press

ENTER.

I/P setting

Adjusting the image and input signal can give you a more beautiful picture.

Repeat steps 1 to 3 in Film mode.

Press a/b to select “I/P Setting”, and then

press ENTER.

Press a/b to select “Interlace” or

“Progressive”, and then press ENTER.

NOTE

• The picture is progressive scan when Film Mode is “On”.

Page 28

Basic adjustment settings

AV mode selection

This option links to “AV Mode” in the Picture menu. (See page 22.)

Audio adjustment

For each selected AV mode, you can adjust the following three items: Treble, Bass, and Balance; to your preferred setting. After choosing the AV mode you want to adjust, next carry out audio adjustment.

Press MENU and the MENU screen displays.

Press c/d to select “Audio”.

Audio

STANDARD

Treble

Bass

Balance

Surround

Reset

Press a/b to select a speciﬁ c adjustment

item.

Press c/d to adjust the item to your desired

position.

[0]

[0] L

Setup

Surround

When you set to On, you can enjoy surround sound, the same as if you were in a movie theatre.

Using SURROUND on the remote control unit

Press SURROUND to switch the Surround function on and off.

Selected item

Off

Makes it possible to enjoy natural, realistic surround sound.

Outputs the normal sound.

Using Surround on the menu screen

You can produce Surround effects from the “Audio” setting.

Press MENU and the MENU screen displays.

Press c/d to select “Audio”.

Description

Selected item

Treble

Bass

Balance

NOTE

• For resetting all adjustment items to factory preset values, press a/b to select “Reset”, press ENTER, press a/b to select “Yes”, and then press ENTER.

• When headphones are in use, “Surround” cannot be selected.

• “Surround” can be selected for each “AV Mode” setting.

• “Balance” cannot be adjusted when “Surround” is set to “On”.

button

For weaker treble

For weaker bass

Decrease audio from the right speaker

button

For stronger treble

For stronger bass

Decrease audio from the left speaker

Press a/b to select “Surround”, and then

press ENTER.

Audio

STANDARD

Treble

Bass

Balance

Surround

Reset

Press a/b to select “On”, and then press

ENTER.

NOTE

• When headphones are in use, “Surround” cannot be selected.

• “Surround” can be selected for each “AV Mode” setting.

[0]

[0] L

Setup

Page 29

Useful adjustment settings

Password setting for child lock (for TV input mode)

Allows you to use a password to protect certain settings from being accidentally changed.

Setting a password

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Child Lock”, and then

press ENTER.

If you already set the password, enter it here.

Setting a channel

Repeat steps 1 to 4 in Setting a password.

Press a/b to select “Channel Setting”, and

then press ENTER.

Press a/b to select “Yes”, and then press

ENTER.

Change Password

Channel Setting

Reset

Press a/b/c/d to select the channel that

you wish to apply the Child Lock, and then

Yes

press ENTER.

• The Child Lock setting becomes effective only when the TV is turned off after the Child Lock is applied.

Resetting the password

Allows you to reset your password.

Repeat steps 1 to 4 in Setting a password.

Press a/b to select “Change Password”, and

then press ENTER.

Change Password

Channel Setting

Reset

Enter the 4-digit number as a password using

0 — 9.

Change Password

Channel Setting

Reset

Enter the same 4-digit number as in step 6 to

conﬁ rm.

NOTE

• To view a locked channel you must enter a password. When you select a locked channel, a password prompt message pops up.

New Password

Reconfirm

New Password

Reconfirm

Press a/b to select “Reset”, and then press

ENTER.

Press a/b to select “Yes”, and then press

ENTER.

Change Password

Channel Setting

Reset

NOTE

• As a precautionary measure, make a note of your password on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach.

• This function is only available for TV input mode.

• To relock a channel which has been temporarily unlocked by inputting the correct password, turn power off and then on again.

• When no password is input for 20 seconds after the prompt message is displayed, the TV goes into standby mode.

Yes

Page 30

Useful adjustment settings

Input Label

You can assign each input source a label you like.

Press TV/VIDEO to select the desired input

source.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Input Label”, and then

press ENTER.

Press a/b to select characters and c/d

to move to the desired digit to label the input source.

• When you want to change the input label that you have already assigned to the default name, press

to move to “CLEAR” on the “Input Label”

c/d

screen, and then press ENTER.

Repeat the above until the name is fully spelt

out, and then press MENU.

• The name can be 6 characters or less.

• When you want to set an input source name of less than 6 characters, press MENU to exit from the labelling menu.

INPUT1

INPUT2

DVD

INPUT4

Image position

For adjusting a picture's horizontal and vertical position.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Position”, and then

press ENTER.

Press a/b to select “H-Pos.” or “V-Pos.”.

H-Pos. [0] +

V-Pos. [0]

Reset

Press c/d to adjust the item to your desired

position.

Selected item

H-Pos.

V-Pos.

NOTE

• For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press ENTER.

• Adjustments are stored separately according to input

source.

• Images may not be displayed properly depending on the settings and/or input signals.

Centres the image by moving it to the left or right.

Centres the image by moving it up or down.

Description

(Example)

NOTE

• You cannot change labels if the input source is TV.

Page 31

Useful adjustment settings

WIDE MODE

Normal

Zoom 14:9

Panorama

Full

Cinema 16:9

Cinema 14:9

WIDE mode (for TV/AV input mode)

Manual Selection

Press WIDE.

• The WIDE MODE menu displays.

• The menu lists the wide mode options selectable for the type of video signal currently received.

Press WIDE or a/b while the WIDE MODE

menu displays on the screen.

• As you toggle down the options, each is immediately reﬂ ected on the TV.

Selected item

Normal

Zoom 14:9

Panorama

Full

Cinema 16:9

Cinema 14:9

Normal

Cinema 14:9 Cinema 16:9 Full

For 4:3 “standard” pictures. A side bar appears on each side.

For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes.

In this mode the picture is progressively stretched toward each side of the screen.

For 16:9 squeeze pictures.

For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

Zoom 14:9 Panorama

Description

Page 32

Useful adjustment settings

WIDE mode (for PC input mode)

You can select the screen size.

NOTE

• Connect the PC before making adjustments. (See page

41.)

• Selectable screen size may vary with input signal type.

Press WIDE.

• The WIDE MODE menu displays.

Screen size images.

Input Signal FullNormal

1024g768 1280g768 1360g768

WIDE MODE

Normal

Full

Keeps the original aspect ratio in a full screen display.

Press WIDE or a/b to select a desired item

on the menu.

An image fully ﬁ lls the screen.

Page 33

Useful adjustment settings

Language setting for on-screen display

You can also select a language from setup menu. Select from among 2 languages: English and Chinese.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Language”, and then

press ENTER.

Press a/b to select the desired language

listed on the screen, and then press ENTER.

Page 34

Useful adjustment settings

Audio Only

When listening to music from a music programme, you can set the display off and enjoy audio only.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Press a/b to select “Audio Only”, and then

press ENTER.

Press a/b to select “On”, and then press

ENTER.

Selected item

Off

NOTE

• When you make operations that change the picture on the TV such as by changing the input source, the Audio Only function is set to “Off”.

Audio is output without screen image.

Both screen images and audio are output.

Description

Input Select

Selecting input source

Can use for selecting the input source.

Press TV/VIDEO on the remote control unit or

TV/VIDEO on the TV.

Press TV/VIDEO on the remote control unit

or TV/VIDEO on the TV to select the input source.

• An image from the selected source automatically displays.

• You can also select the input source by pressing

a/b

Selecting input signal type

For setting the signal type of external equipment.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

DNR (Digital Noise Reduction)

Produces a clearer video image.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Press a/b to select “DNR”, and then press

ENTER.

Press a/b to select the desired level, and

then press ENTER.

Off

High

Low

Press a/b to select “Input Select”, and then

press ENTER.

Press a/b to select an input source among

“Input1”, “Input2” and “Input3”, and then press ENTER.

Press a/b to select the desired level, and

then press ENTER.

Input source

Input 1

Input 2

Input 3

NOTE

• If no (colour) image displays, try to change the other signal type.

• Check the operation manual of the external equipment for the signal type.

• When the signal type is set to “Auto”, the input terminal where cable is connected is automatically selected.

• When the signal type is set to “Auto” and multiple video signal cables are connected, the signal type is selected in the following prioritised order:

Input 1/Input 2: Components Video Input 3: S-Videos Video

Auto, Component, Video

Auto, S-Video, Video

Selectable item

Page 35

Useful adjustment settings

Blue Screen

Automatically turns the screen blue if no broadcast signal is received.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Press a/b to select “Blue Screen”, and then

press ENTER.

Press a/b to select “On”, and then press

ENTER.

Colour system setting

You can change the colour system to one that is compatible with the image on the screen.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Press a/b to select “Colour System”, and

then press ENTER.

Press a/b to select a compatible video signal

system of your equipment, and then press ENTER.

AUTO

PAL

SECAM

NTSC 3.58

NTSC 4.43

PAL-60

NOTE

• Factory preset value is “AUTO”.

• If “AUTO” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).

Page 36

Useful adjustment settings

Power Control

Power Control setting allows you to save energy.

Power Control for AV source

No Signal Off

When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

• Power control menu displays.

Press a/b to select “Power Control”, and

then press ENTER.

Press a/b to select “No Signal Off”, and then

press ENTER.

Press a/b to select “Enable”, and then press

ENTER.

• Five minutes before the power shuts down, remaining time displays every minute.

NOTE

• “Disable” is factory preset value.

• When a TV programme ﬁ nishes, and the TV receives signal input, this function may not operate.

Power Control for PC source

Power Management

When set, the power will automatically shut down if no signal is input for a certain time.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

• Power control menu displays.

Press a/b to select “Power Control”, and

then press ENTER.

Press a/b to select “Power Management”,

and then press ENTER.

Press a/b to select “Mode1” or “Mode2”,

and then press ENTER.

Off

Mode1

Mode2

No Operation Off

When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

• Power control menu displays.

Press a/b to select “Power Control”, and

then press ENTER.

Press a/b to select “No Operation Off”, and

then press ENTER.

Press a/b to select “Enable”, and then press

ENTER.

• Five minutes before the power shuts down, remaining time displays every minute.

NOTE

• “Disable” is factory preset value.

Selected item

Off

Mode1

Mode2

NOTE

• If you turn off the power by disconnecting AC cord when setting “Mode2” in power management, the TV may not function properly after turning the power on again. In such case, press POWER on the remote control unit.

• Pressing POWER on the display will have the same result.

• No power management

• Factory preset value.

• If no signal inputs for approximately 8 minutes, the power shuts down.

• Even if you start using the PC and the signal inputs again, the TV stays off.

• The TV turns on again by pressing POWER. (See page 13.)

• If no signal inputs for approximately 8 seconds, the power shuts down.

• When you start using the PC and the signal inputs again, the TV turns on.

• The TV turns on again by pressing

POWER. (See page 13.)

Description

Page 37

Useful adjustment settings

HDMI Setup

HDMI (High-Deﬁ nition Multimedia Interface) terminal selection.

To watch an HDMI equipment image, select

“INPUT4” or “INPUT5” using TV/VIDEO on the remote control unit or on the TV.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Press a/b to select “HDMI Setup”, and then

press ENTER.

• The HDMI Setup can be selected only when “INPUT4” or “INPUT5” is selected.

...

[

Option

Audio Only

DNR

Input Select

Blue Screen

Colour System

Power Control

HDMI Setup

PC Setup

HDMI Setup

]

PC Setup

Input Signal (PC input mode only)

• Some input signals may have to be registered manually to display properly.

• The input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.

1024g768 1360g7681280g768

NOTE

• You can only select the “Input Signal” on the Setup menu when receiving one of the 3 input signals listed above.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Press a/b to select “PC Setup”, and then

press ENTER.

Press a/b to select “Input Signal” and then

press ENTER.

Press a/b to select the desired input signal

on the display.

Press a/b to select the desired item or

setting, and then press ENTER.

HDMI Setup

items

Signal Type

Colour Matrix

Auto View

Audio Select

Selectable

items

RGB/ YCbCr4:4:4/ YCbCr4:2:2

Auto/ITU601/ ITU709

Enable/Disable

Digital/Analogue

Description

Select the video signal type from the HDMI terminal.

Select the video colour matrix type when a YCbCr signal is input.

Set whether or not to use WIDE MODE based on signal recognition, including an HDMI signal.

Select “Digital” for audio signal via the HDMI terminal. Select “Analogue” for audio signal via the AUDIO jack. (selectable only when using INPUT4 of the two HDMI terminals.)

NOTE

• Refer to your external equipment operation manual for the signal type.

• When connecting a DVI-HDMI conversion adaptor/cable to the HDMI terminals, the image may not come in clearly.

1024 x 768

1280 x 768

1360 x 768

(Example)

Page 38

Useful adjustment settings

Auto Sync. adjustment (PC input mode only)

For automatically adjusting the PC image.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Press a/b to select “PC Setup”, and then

press ENTER.

Press a/b to select “Auto Sync.”, and then

press ENTER.

Press a/b to select “Yes”, and then press

ENTER.

• Auto Sync. starts.

NOTE

• Auto Sync. is likely to succeed when an input PC image has wide vertical stripes (ex. pattern with high contrast stripes, or cross-hatched).

It may fail when an input PC image is solid (low contrast).

• Be sure to connect the PC to the TV and switch it on before starting Auto Sync.

Fine Sync. adjustment (PC input mode only)

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimise the image.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Press a/b to select “PC Setup”, and then

press ENTER.

Press a/b to select a speciﬁ c adjustment

item among “H-Position”, “V-Position”, “Clock” and “Phase”.

Input Signal

Auto Sync.

H-Position

V-Position

Clock

Phase

Reset

[90]

[60]

[90]

[ 8]

Selected item

H-Position

V-Position

Clock

Phase

Press c/d to adjust the item to your desired

position.

NOTE

• For resetting all adjustment items to factory preset values, press a/b to select “Reset”, and then press ENTER.

• Images may not be displayed properly depending on the settings and/or input signals.

Centres the image by moving it to the left or right.

Centres the image by moving it to the up or down.

Adjusts when the image ﬂ ickers with vertical stripes.

Adjusts when characters have low contrast or when the image ﬂ ickers.

Description

Page 39

Useful features

Dual screen functions

Allows you to display two pictures on the screen at one time.

Dual screen

You can display two pictures except when inputting from the RS-232C or PC INPUT terminal.

Press P&P.

• Dual screen displays and a selected input source image displays.

Press SELECT to set either screen to be

active.

• “z” displays on the active screen, which has sound output.

Press TV/VIDEO to select another input

source on the active screen.

• A selected image displays.

Press P&P to exit dual screen.

Picture and still image

You can freeze a motion picture on the Display.

Press FREEZE.

• A moving image displays on the left screen and a still image displays on the right screen. The still image is one frame captured from a moving image at the moment you press FREEZE.

FREEZE

(Example)

Reshoot the still image by pressing ENTER.

• Each time you press ENTER, the image on the right screen updates.

Press RETURN to exit still image.

NOTE

• This function does not work under the following input conditions:

Two pictures from the same source (e.g. INPUT 1 and

INPUT 1), Two pictures with different vertical frequency (e.g. PAL

and PAL-60, PAL (50 Hz) and NTSC (60 Hz)),

• When you press P&P, the current input is moved to the left side screen display, and the other input appears on the right side screen display.

When you cannot acquire dual screen capability, perform

the operation below. — Select another input whose vertical frequency is same

as one of the current inputs (e.g. PAL and PAL).

• When this function is not available, “No dual screen display available.” will display.

NOTE

• When this function is not available, “No still image available.” will display.

• The still image automatically goes out after 30 minutes.

Page 40

Using external equipment

You can connect many types of external equipment to your TV, like a VCR, DVD player, HDTV tuner, game console and camcorder. To view external source images, select the input source from TV/VIDEO on the remote control unit or TV/VIDEO on the TV.

Displaying an external equipment image

Explanation here is for the setting when connecting DVD to INPUT1 terminal.

CAUTION

• To protect all equipment, always turn off the TV before connecting to a VCR, DVD player, HDTV tuner, game console, camcorder or other external equipment.

NOTE

• See pages 38 to 41 for external equipment connection.

• Please refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.

• Each time TV/VIDEO is pressed, the input source toggles.

• If the image does not come in clearly, you may need to change the input signal type setting on the “Input Select” menu.

• Refer to your external equipment operation manual for the signal type.

Displaying a DVD image (Example)

To watch a DVD image, select “INPUT1” using

TV/VIDEO on the remote control unit or TV/ VIDEO on the TV.

INPUT1

INPUT2

INPUT3

INPUT4

Select the desired signal type on “Input Select”

in the “Option” menu. (See page 32.)

For INPUT1 signal

...

[

Option

Auto

Component

Video

The setting is stored and can be selected.

Input Select

]

Connecting a VCR

You can use the INPUT 3 terminal when connecting a VCR and other audiovisual equipment.

S-VIDEO

VIDEO

AUDIO

VCR

Composite cable (VIDEO/AUDIO) (commercially available)

S-video cable (commercially available)

To watch an image from this input terminal, you need to select the input source (see page 38) and the input signal type (see page 32).

Page 41

Using external equipment

Connecting a DVD player

You can use the INPUT 1, INPUT 4 (HDMI) or INPUT 5 (HDMI) terminal when connecting to a DVD player and other audiovisual equipment.

NOTE

• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 4.

DVD player

HDMI

(CB)

(CR)

AUDI O

To watch an image from this input terminal, you need to select the input source (see page 38) and the input signal type (see page 32).

HDMI Cable (commercially available)

Component cable (commercially available)

Audio cable (commercially available)

When using component cable, select “Component” for “Input Select” in the menu.

Connecting a game console or camcorder

A game console, camcorder and some other audiovisual equipment are conveniently connected using the INPUT 3 terminals.

NOTE

• When the S-video terminal and video terminals are both used, the S-video input takes priority over the video terminals only when “Auto” is selected in “Input Select” setting.

• You can also connect the game console to INPUT 1 or 2 terminals to enjoy clearer picture.

To watch an image from this input terminal, you need to select the input source (see page 38) and the input signal type (see page 32).

S-VIDEO

VIDEO

AUDI O

Composite cable (VIDEO/AUDIO) (commercially available)

S-video cable (commercially available)

Game console/Camcorder

Page 42

Using external equipment

Connecting an HDTV tuner

You can use the INPUT1 or INPUT 2 terminal when connecting to an HDTV tuner and other audiovisual equipment.

To watch an image from this input terminal, you need to select the input source (see page 38) and the input signal type (see page 32).

(CB)

(CR)

AUDIO

HDTV tuner

Component cable (commercially available)

Audio cable (commercially available)

When using component cable, select “Component” for “Input Select” in the menu.

Page 43

Using external equipment

Viewing an image from a PC

Connecting a PC

Use the PC terminals to connect a PC.

NOTE

• The PC INPUT terminals are DDC1/2B-compatible.

• Refer to page 42 for a list of PC signals compatible with the TV.

RGB cable

ANALOG RGB

AUDIO

(commercially available)

Ø 3.5 mm stereo minijack cable (commercially available)

Signal names for 15-pin mini D-sub connector

Pin No. Signal name Pin No. Signal name Pin No. Signal name

4 3

141312

Not connected +5V VD

NOTE

• Macintosh adaptor may be required for use for some Macintosh computers.

INPUT1

INPUT2

INPUT3

INPUT4

INPUT5INPUT5

R GND (Ground) Not connected

G GND (Ground) SDA

B GND (Ground) HD

CSYNC GND (Ground) SCL

Displaying an image from a PC

To view an image from a PC, select “PC” using TV/ VIDEO on the remote control unit or TV/VIDEO on the

TV.

When connecting to a PC, the correct input signal type is automatically detected. (See page 35.)

NOTE

• Each time TV/VIDEO is pressed, the input source toggles.

Page 44

Appendix

Troubleshooting

Problem

• No power.

• Unit cannot be operated.

• Remote control unit does not operate.

• Picture is cut off.

• Strange colour, light colour, or dark, or colour misalignment.

• Power is suddenly turned off.

Possible Solution

• Check if you pressed POWER on the remote control unit. (See page 13.) If the indicator on the TV lights up red, press POWER.

• Is the AC cord disconnected? (See page 6.)

• Has the power been turned on? (See page 13.)

• External inﬂ uences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the unit after ﬁ rst turning the power off the TV or unplugging the AC cord and re-plugging it in after 1 or 2 minutes.

• Are batteries inserted with polarity (e, f) aligned? (See page 5.)

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or ﬂ uorescent lighting?

• Is a ﬂ uorescent light illuminated to remote control sensor?

• Is the image position correct? (See page 28.)

• Are screen mode adjustments such as picture size made correctly? (See pages 29 to 30.)

• Adjust the picture tone. (See pages 23 to 25 and 32.)

• Is the room too bright? The picture may look dark in a room that is too bright.

• Check the colour system setting. (See pages 19 and 33.)

• Check the input signal setting. (See page 32.)

• The unit's internal temperature has increased.

Remove any objects blocking vent or clean.

• Check the power control setting. (See page 34.)

• Is sleep timer set? (See page 15.)

• No picture.

• No sound.

• Is connection to other equipment correct? (See pages 38 to 41)

• Has input signal setup been done correctly after connection? (See page 32.)

• Is the correct input selected? (See page 32.)

• Is picture adjustment correct? (See pages 23 to 25.)

• Is the antenna connected properly? (See page 8.)

• Is “On” selected in “Audio Only”? (See page 32.)

• Is the volume too low? (See page 15.)

• Make sure that headphones are not connected. (See page 10.)

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, ofﬁ ce), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.

Storage temperature: f20°C to e60°C.

PC compatibility chart

Resolution

VGA

SVGA

640 g 480

800 g 600

Horizontal

Frequency

31.5 kHz

37.9 kHz

37.5 kHz

43.3 kHz

35.1 kHz

37.9 kHz

48.1 kHz

46.9 kHz

53.7 kHz

Vertical

Frequency

60 Hz

72 Hz

75 Hz

85 Hz

56 Hz

60 Hz

72 Hz

75 Hz

85 Hz

VESA

Standard

✓

Resolution

XGA

WXGA

1024 g 768

1280 g 768

1360 g 768

Horizontal

Frequency

48.4 kHz

56.5 kHz

60.0 kHz

47.8 kHz

47.7 kHz

Vertical

Frequency

60 Hz

70 Hz

75 Hz

60 Hz

VESA

Standard

✓

Page 45

Appendix

RS-232C port speciﬁ cations

PC Control of the TV

• When a program is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and

settings can be made, enabling automatic programmed playing.

• Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-sub RS-232C for the connections.

NOTE

• This operation system should be used by a person who is accustomed to using PCs.

Communication conditions

Set the RS-232C communications settings on the PC to match the communications conditions of the TV. The communications settings of the TV are as follows:

Baud rate:

Data length:

Parity bit:

Stop bit:

Flow control:

9,600 bps

8 bits

None

1 bit

None

Communication procedure

Send the control commands from the PC via the RS-232C connector. The TV operates according to the received command and sends a response message to the PC. Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command.

Command format

Eight ASCII codes e CR

C1 C2 C3 C4 P1 P2 P3 P4

Command 4-digits Parameter 4-digits Return code

Parameter

Input the parameter values, aligning left, and ﬁ ll with space(s) for the remainder. (Be sure that four values are input for the parameter.) When the input parameter is not correct, “ERR” returns. (Refer to “Response code format”.)

Command 4-digits: Command. The text of four characters. Parameter 4-digits: Parameter 0 — 9, space, ?

0009

a 30

100

0055

When “?” is input for some commands, the present setting value responds.

????

Page 46

Appendix

Response code format

Normal response

Return code (0DH)

Problem response (communication error or incorrect command)

ERR

Return code (0DH)

Commands

• Commands not indicated here are not guaranteed to operate.

CONTROL ITEM COMMAND PARAMETER

POWER SETTING

INPUT SELECTION A

CHANNEL

INPUT SELECTION B

VOLUME

POSITION

POWER OFF (STANDBY)

INPUT SWITCHING (TOGGLE)

INPUT1—6 (INPUT6=PC) 0: TV

TV DIRECT CHANNEL (1—99)

CHANNEL UP

CHANNEL DOWN

INPUT1 (AUTO)

INPUT1 (COMPONENT)

INPUT1 (VIDEO)

INPUT2 (AUTO)

INPUT2 (COMPONENT)

INPUT2 (VIDEO)

INPUT3 (AUTO)

INPUT3 (S-VIDEO)

INPUT3 (VIDEO)

VOLUME (0—60)

H-POSITION (AV) (l10—10)

H-POSITION (PC) (0—180)

V-POSITION (AV) (l20—20)

V-POSITION (PC) (0—120)

CLOCK (0—180)

PHASE (0—15)

CONTROL

CONTENTS

CONTROL ITEM COMMAND PARAMETER

WIDE MODE

MUTE

SURROUND

DUAL SCREEN

AUDIO CHANGE

SLEEP TIMER

TOGGLE

NORMAL

ZOOM 14:9

PANORAMA

FULL

CINEMA 16:9

CINEMA 14:9

TOGGLE

OFF

SURROUND TOGGLE

SURROUND ON

SURROUND OFF

DUAL SCREEN OFF

DUAL SCREEN ON

TOGGLE

OFF

SLEEP TIMER 30 MIN

SLEEP TIMER 1 HOUR

SLEEP TIMER 1 HOUR 30 MIN

SLEEP TIMER 2 HOUR

SLEEP TIMER 2 HOUR 30 MIN

NOTE

• If an underbar (_) appears in the parameter column, enter a space.

• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.

CONTROL

CONTENTS

Page 47

Appendix

Speciﬁ cations

Model

Item

LCD panel

Number of dots 3,147,264 dots (1366 g 768 g 3 dots)

Video Colour System

TV Function

Brightness

Backlight life

Viewing angles

Audio ampliﬁ er

Speakers

Terminals

TV-Standard

Receiving Channel

TV-Tuning System

STEREO/BILINGUAL

Rear

VHF/UHF

CATV

ANTENNA IN

INPUT 1

INPUT 2

INPUT 4

INPUT 5

42o (106 cm) Advanced Super View & BLACK TFT LCD

PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60

PAL: B/G, D/K, I SECAM: B/G, D/K, K/K

44.25—863.25 MHz

S1—S41ch (including Hyperband)

Auto Preset 99 ch

NICAM: B/G, I, D/K A2 stereo: B/G

450 cd/m

60,000 hours (at Backlight Standard position)

H : 176º V : 176º

10W g 2

Ø 6.5 cm 4pcs

UHF/VHF 75 q DIN type

VIDEO in, AUDIO in, COMPONENT in (480I, 580I, 480P, 580P, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)

HDMI (HDMI input) (480P, 580P, 720P/60Hz, 1080I/50Hz, 1080I/60Hz), AUDIO in

HDMI (HDMI input) (480P, 580P, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)

LC-42BX5H

NTSC: M

PC INPUT 15 pin mini D-sub, AUDIO in (Ø 3.5mm jack)

MONITOR OUTPUT

RS-232C

Side

INPUT 3

Front

Headphones Ø 3.5mm jack (Audio output)

OSD language

Power Requirement

Power Consumption

Weight

Operating Temperature

• As a part of policy of continuous improvement, SHARP reserves the right to make design and speciﬁ cation changes for product improvement without prior notice. The performance speciﬁ cation ﬁ gures indicated are nominal values of production units. There may be some deviations from these values in individual units.

without stand

with stand

Optional accessories

The listed optional accessories are available for the LCD colour TV. Please purchase them at your nearest shop.

• Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.

VIDEO out, AUDIO out

9 pin D-sub male connector

VIDEO in, AUDIO in, S-VIDEO in

English/Chinese

AC 110—240 V, 50/60 Hz

225 W (0.8 W Standby) (Method IEC60107)

31.5 kg

37.0 kg

0°C—40°C

Part name

Wall mount bracket

* The adjustable TV angle is either 0° or 5° when using the

AN-37AG2 wall mount bracket. (See page 9.)

Model number

AN-37AG2*

AN-52AG1

Page 48

Dimensional drawings

671

1031 105 139

930.3

711

772

Unit: mm

523

200

61100

460

306

200

Page 49

Page 50

LC-42BX5H

OPERATION MANUAL

使用說明書