Sharp Aquos LC-40LE700UN, Aquos LC-46LE700UN, Aquos LC-52LE700UN Operation Manual

Download

Page 1

LC-40LE700UN LC-46LE700UN LC-52LE700UN

OPERATION MANUAL MODE D'EMPLOI

MANUAL DE OPERACIÓN

ENGLISHFRANÇAISESPAÑOL

LC-40LE700UN LC-46LE700UN LC-52LE700UN

ENGLISHFRANÇAISESPAÑOL

OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN

LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA

DE CRISTAL LÍQUIDO

ENGLISHFRANÇAISESPAÑOL

Page 2

LC-52LE700UN

15 3/

(400)

(175)

48 3/

(1238)

(765)

(818)

(53)

45 9/

(1157.0)

(651.0)

(453)

22 31/

(571)

13 61/

(354)

6 5/

(160)

3 3/

(95)

3 43/

(93)

2 9/

(65)

4 17/

(115)

AN-52AG4

3 3/

(95)

Page 3

LC-40LE700UN LC-46LE700UN LC-52LE700UN

LIQUID CRYSTAL TELEVISION

ENGLISH

OPERATION MANUAL

ENGLISH

IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV.

Model No.:

Serial No.:

IMPORTANT INFORMATION

WARNING:

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning ﬂash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Page 4

IMPORTANT INFORMATION

WARNING: FCC Regulations state that any unauthorized changes or modiﬁcations to this equipment not expressly

approved by the manufacturer could void the user's authority to operate this equipment.

CAUTION:

This product satisﬁes FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

DECLARATION OF CONFORMITY:

SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-40LE700UN/LC-46LE700UN/LC-52LE700UN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RESPONSIBLE PARTY:

For Business Customers: URL http://www.sharpusa.com

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 TEL: 1-800-BE-SHARP

“Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”

Trademarks

• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

• “HDMI, the HDMI logo and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

• Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efﬁ ciency.

•

and LC logo mark are registered trademarks of SHARP Corporation.

This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly

displaying easy-to-read characters on LCD screens. However, other fonts are used for some screen pages, too.

Page 5

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or ﬁre. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories speciﬁed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Information

15) Power Sources—This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of ﬁre or electric shock.

17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a ﬁre or electric shock. Never spill liquid of any kind on the product.

18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualiﬁed service personnel under the following conditions:

a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment

of other controls may result in damage and will often require extensive work by a qualiﬁed technician

to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service.

19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement parts speciﬁed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in ﬁre, electric shock, or other hazards.

20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.

Page 6

IMPORTANT SAFETY INSTRUCTIONS

• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70,

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA LEAD IN WIRE

provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

NEC — NATIONAL ELECTRICAL CODE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING

ELECTRODE SYSTEM (NEC ART 250, PART H)

• Turn off the main power and unplug the AC cord from the wall outlet before handling.

• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may scratch the panel surface.

• Use a soft damp cloth to gently wipe the panel when it is really dirty.

(It may scratch the panel surface when wiped strongly.)

• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.

• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage the panel surface.

• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.

• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the manufacturer.

• Selecting the location — Select a place with no direct sunlight and good ventilation.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufﬁ cient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's instructions are followed.

• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.

• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including ampliﬁ ers) that produce heat.

• The Liquid Crystal panel is a very high technology product with 2,073,600 pixels, giving you ﬁ ne picture details.

Occasionally, a few non-active pixels may appear on the screen as a ﬁ xed point of blue, green or red. Please note that

this does not affect the performance of your product.

• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

• To prevent ﬁ re, never place any type of candle or ﬂ ames on the top or near the TV set.

• To prevent ﬁ re or shock hazard, do not place the AC cord under the TV set or other heavy items.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• To prevent ﬁ re or shock hazard, do not expose this product to dripping or splashing.

No objects ﬁ lled with liquids, such as vases, should be placed on the product.

• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may result in ﬁ re or electric shock. Exercise special caution when using the product around children.

Precautions when transporting the TV

• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the TV by two people holding it with two hands — one hand on each side of the TV.

Page 7

IMPORTANT SAFETY INSTRUCTIONS

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE

•

The home theater entertainment experience is a growing trend and larger ﬂ at panel displays are popular purchases. However, ﬂ at panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.

•

Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury.

THIS MANUFACTURER CARES!

•

The consumer electronics industry is committed to making home entertainment enjoyable and safe.

TUNE INTO SAFETY

One size does NOT ﬁ t all. Follow the manufacturer’s recommendations for the safe

• installation and use of your ﬂ at panel display. Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t place ﬂ at panel displays on furniture that can easily be used as steps, such as

• a chest of drawers. Remember that children can become excited while watching a program, especially

• on a “larger than life” ﬂ at panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.

•

Care should be taken to route all cords and cables connected to the ﬂ at panel display so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

•

Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

•

Follow all instructions supplied by the display and wall mount manufacturers.

•

If you have any doubts about your ability to safely install your ﬂ at panel display, contact your retailer about professional installation.

•

Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.

•

A minimum of two people are required for installation. Flat panel displays can be heavy.

CEA is the preeminent trade association promoting growth in the $161 billion U.S.

Note:

consumer electronics industry. More than 2,200 companies enjoy the beneﬁ ts of CEA membership, including legislative advocacy, market research, technical training and education, industry promotion and the fostering of business and strategic relationships

Page 8

Supplied Accessories

Make sure the following accessories are provided with the product.

Remote control unit

(g1)

Page 7

• Always use the AC cord supplied with the TV.

• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.

• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available

directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for ordering, or VISIT www.sharpusa.com/SharpDirect.

“AAA” size battery

(g2)

Page 8

AC cord

(g1)

Page 7

Cable clamp

(g1)

Page 7

Stand unit

(g1)

Page 6

Operation manual

(g1)

QUICK REFERENCE

Attaching the Stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

• Attach the stand in the correct direction.

• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

1 Conﬁ rm that there are 12 screws (all the same size)

supplied with the stand unit.

3 1 Insert the stand into the openings on the bottom

of the TV.

Insert and tighten the 4 screws into the 4 holes

on the rear of the TV.

Set the post for the stand unit onto the box.

Attach the base to the post.

Insert and tighten the 8 screws into the 8 holes on the bottom of the base.

• Hold the stand unit securely with one hand, and then

tighten the screws.

Screws

FRONT

• To detach the stand, perform the steps in reverse order.

Screws

Soft cushion

Page 9

QUICK REFERENCE

QUICK INSTALLATION TIPS

Attach your antenna to the back of the television.

(See page 8.) Connect the AC plug for the television into the AC

outlet.

AC outlet

• Place the TV close to the AC outlet, and keep the power

plug within reach.

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT

TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.

Bundle the cords properly with the cable clamp.

Using the Remote Control Unit

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.

Remote control sensor

30º 30º

Cautions regarding the remote control unit

■

• Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

• Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.

• The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control sensor.

30º

17´ (5 m)

30º

How to turn on the television for the ﬁ rst time.

A) Press POWER on the television.

POWER

B) The POWER indicator on the front of the

television lights GREEN.

POWER indicator

• Speakers cannot be detached from the TV.

• TV angle cannot be adjusted.

IMPORTANT:

The POWER indicator on the television should light GREEN indicating you have power to the television. If the POWER indicator on the television still does not light up, press TV POWER on the remote control to turn the power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

Page 10

Preparation

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.

1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available).

F-type connector

75-ohm coaxial cable (round)

2. A 300-ohm system is a ﬂ at “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (Commercially available).

NOTICE

F-type connector should be ﬁ nger-tightened only.

300-ohm twin-lead cable (ﬂ at)

F-type connector

When connecting the RF cable to the TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your TV set. (The breaking

75-ohm coaxial cable

of internal circuit, etc.)

Connecting Antenna

• Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3 or 4).

Cable without a CATV

converter

VHF/UHF antenna

Combination VHF/

UHF antenna

Separate VHF/UHF

antenna

Cable

VHF

NTENNA

Cable TV lead-In

75-ohm coaxial cable (round)

300-ohm twin-lead cable (ﬂat)

UHF ANTENNA

300-ohm twin-lead cable

75-ohm coaxial cable

Home Antenna terminal (75-ohm)

Coaxial cable (commercially available)

Home Antenna terminal (75-ohm)

Coaxial cable (commercially available)

300/75-ohm adapter

(commercially available)

IN OUT

Combiner (commercially available)

To TV antenna terminal

Installing Batteries in the Remote Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

1 Open the battery cover.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you ﬁ nd any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove batteries from it.

2 Insert two “AAA” size batteries

(supplied with the product).

• Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

3 Close the battery cover.

Page 11

Contents

IMPORTANT INFORMATION ..................... 1

Trademarks ....................................... 2

DEAR SHARP CUSTOMER ....................... 3

IMPORTANT SAFETY INSTRUCTIONS ........ 3-5

Supplied Accessories ............................ 6

QUICK REFERENCE

Attaching the Stand ............................ 6

QUICK INSTALLATION TIPS ................... 7

Using the Remote Control Unit ................. 7

Preparation

Antennas ....................................... 8

Installing Batteries in the Remote Control Unit ... 8

Part Names

TV (Front) ..................................... 10

TV (Rear/Side) ................................. 10

Remote Control Unit ........................... 11

Connecting to External Equipment

Connecting Audiovisual Equipment .........12-13

Connecting a Speaker/Ampliﬁ er ............... 13

Watching TV

Turning On/Off the Power ..................... 14

Initial Setup.................................... 14

Direct Button Operation

Changing Channels ....................... 15

Changing Volume .......................... 15

MUTE ...................................... 15

Sleep Timer ................................ 15

FLASHBACK ............................... 15

SURROUND ............................... 15

FREEZE .................................... 15

INPUT ...................................... 15

AV MODE .................................. 16

AUDIO ..................................... 16

POWER SAVING ........................... 17

Closed Captions and

Digital Closed Captions ................... 17

VIEW MODE ............................... 18

Enjoying photo and music playback

Viewing photos and listening to music ......... 32

USB memory device compatibility ............. 32

Photo Mode ................................... 33

Music Mode ................................... 33

USB Menu

Other Viewing Options

Presetting Remote Control Function ........... 36

Operating the Connected Equipment .......... 36

Using AQUOS LINK

Controlling HDMI Equipment

Using AQUOS LINK .......................38-40

AQUOS LINK Menu ........................40-41

Using a PC

Connecting a PC .............................. 42

Displaying a PC image on the screen .......... 43

Adjusting the PC Image ....................... 44

Setting Audio Input ............................ 44

PC Compatibility Chart ........................ 44

RS-232C Port Speciﬁ cations .................. 45

Using the Internet

Internet Setup ................................. 46

Displaying the Sidebar Widget ................. 47

Entering Text (Software Keyboard) ............. 48

Using the Browser ..........................49-52

Appendix

Removing the Stand ........................... 53

Setting the TV on the Wall ..................... 53

Troubleshooting ............................... 54

Troubleshooting-Digital Broadcasting .......... 54

Speciﬁ cations ................................. 55

Optional Accessory ............................ 55

Information on the Software License for

This Product ................................. 56

Calling for Service ............................... 57

LIMITED WARRANTY ............................ 57

.................................34-35

On-Screen Display Menu

On-Screen Display Menu Operation ........... 19

Menu Operation Buttons ...................... 19

Menu Items ................................... 20

Picture Menu ............................... 21-22

Audio Menu ................................... 23

Power Control Menu .......................... 23

Setup Menu ................................24-27

Option Menu ...............................28-29

Digital Setup Menu .........................30-31

Dimensional Drawings

•

The dimensional drawings for the LCD TV set are shown on the inside back cover.

Page 12

Part Names

TV (Front)

Blue Illumination LED (See page 25.)

TV (Rear/Side)

POWER button

MENU button

INPUT button

Channel buttons (CHU/V)

OPC sensor*

Remote control sensor

OPC indicator

POWER indicator

* OPC: Optical Picture Control

(See page 21.)

(See page 14.)

AC INPUT terminal

INPUT 7 terminal (HDMI)

DIGITAL AUDIO OUTPUT terminal

ETHERNET terminal

Volume buttons (VOLk/l)

INPUT 5 terminal (HDMI)

INPUT 3

terminals

INPUT 4 terminal (PC-IN)

USB

terminal

*1 See pages 12, 13, 38 and 42 for external equipment connection. *2 See page 19 for button operations. *3 See page 7 for connecting the AC cord. *4 See page 44 for details on the PC Audio Select function.

AUDIO terminal (shared for INPUT 4 and INPUT 6) *4 INPUT 6 terminal (HDMI)

INPUT 8 terminal

(HDMI)

AUDIO OUTPUT

terminals

Antenna/Cable in

INPUT 1 terminals INPUT 2 terminals

RS-232C terminal

• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.

• The examples used throughout this manual are based on the LC-46LE700UN model.

Page 13

Part Names

Remote Control Unit

118

2 3

6 7

8 9

13 14

16 17

• When using the remote control unit, point it at the TV.

21 22

23 24

27 28

29 30

1 TV POWER: Switch the TV power on or enter standby. (See page

14.)

2 DISPLAY: Display the channel information. 3 SOURCE POWER: Turns the power of the external equipment

on and off.

4 External equipment operational buttons: Operate the external

equipment.

5 0–9: Set the channel. (See page 15.) 6 • (DOT): (See pages 15 and 36.)

7 NET: Switches the display to the Sidebar Widget, TVkWeb, Web

or TV screen. (See pages 46 to 52 for details.)

8 INPUT: Select a TV input source. (TV, INPUT 1, INPUT 2, INPUT 3,

INPUT 4, INPUT 5, INPUT 6, INPUT 7, INPUT 8, USB) (See page

15.)

9 VOLk/l: Set the volume. (See page 15.) 10 POWER SAVING: Select Power Saving settings. (See page 17.) 11 FREEZE: Set the still image. Press again to return to normal

screen. (See page 15.)

12 EXIT: Turn off the menu screen. 13 OPTION: Display the AQUOS LINK MENU screen. This button

will function only when AQUOS LINK is used. (See pages 38 to 41 for details.)

14 REC STOP: Stops one touch recording. This button will function

only when AQUOS LINK is used. (See pages 38 to 41 for details.)

15 SLEEP: Set the sleep timer. (See page 15.) 16 SURROUND: Select Surround settings. (See page 15.) 17 AUDIO: Selects the MTS/SAP or the audio mode during multi-

channel audio broadcasts. (See page 16.)

18 FUNCTION: Switches the remote control for TV, CBL/SAT, VCR,

BD/DVD and AUDIO operation. Indicator lights up for the current mode. (See pages 36 to 37 for details.)

* To enter the code registration mode, you need to press

FUNCTION and DISPLAY at the same time.

19 LIGHT

example, VOLk/l and CHU/V) on the remote control unit will light. The lighting will turn off if no operations are performed within about 5 seconds. This button is used for performing operations in low-light situations.

20 VIEW MODE: Select the screen size. (See pages 18 and 43.) 21 ENT: Jumps to a channel after selecting with the 0–9 buttons. 22 FLASHBACK: Return to the previous channel or external input

mode. (See page 15.)

23 CHU/V: Select the channel. (See page 15.) 24 MUTE: Mute the sound. (See page 15.) 25 MENU: Display the menu screen. 26 a/b/c/d, ENTER: Select a desired item on the screen. 27 RETURN: Return to the previous menu screen. 28 FAVORITE CH

A, B, C, D: Select 4 preset favorite channels in 4 different

categories. (See page 29.)

While watching, you can toggle the selected channels by pressing

A, B, C and D. 29 FAVORITE: Set the favorite channels. (See page 29.) 30 CC: Display captions from a closed-caption source. (See page 17.) 31 AV MODE: Select an audio or video setting.

(When the input source is TV, INPUT 1, 2 or 3: STANDARD,

MOVIE, GAME, USER, INTELLIGENT, DYNAMIC (Fixed),

DYNAMIC. When the input source is INPUT 4, 5, 6, 7 or

8: STANDARD, MOVIE, GAME, PC, USER, INTELLIGENT,

DYNAMIC (Fixed), DYNAMIC) (See page 16.)

: When this button is pressed, some buttons (for

Page 14

Connecting to External Equipment

For connecting the TV to external equipment, use commercially available cables.

CAUTION

• To protect equipment, always turn off the TV before connecting any external equipment.

• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

Connecting Audiovisual Equipment

You can connect many types of external equipment to your TV like a Blu-ray disc player, DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See page 15.)

Analog Connection

When using composite cable:

• Blu-ray disc player

• DVD player

• Cable/Satellite set-top box

Game console

•

Camcorder

•

VCR

AV cable

VIDEO (Yellow)

AUDIO-L (White)

AUDIO-R (Red)

INPUT 1 or 3

When using S-VIDEO cable:

• Game console

• VCR

Camcorder

•

When using component cable:

• Blu-ray disc player

• Cable/Satellite set-top box

COMPONENT OUT

DVD player

•

S-VIDEO cable

Audio cable

AUDIO-L (White)

AUDIO-R (Red)

VCR

•

Component video cable

Audio cable

AUDIO-L (White)

AUDIO-R (Red)

INPUT 2

INPUT 1 or 2

Y (Green)

PB (Blue)

R (Red)

• To enjoy the AQUOS 1080p display capability, connect your external equipment using a component cable and set the equipment to 1080p output.

• See page 13 for connecting a Blu-ray disc player, DVD player or a Cable/Satellite set-top box to the HDMI terminal.

• The COMPONENT terminals take priority over the VIDEO (INPUT 1) and S-VIDEO (INPUT 2) terminals.

Page 15

Connecting to External Equipment

HDMI Connection

HDMI-certiﬁ ed cable

HDMI OUT

INPUT 5, 6, 7 or 8

When using HDMI-DVI conversion cable:

AUDIO

HDMI-DVI conversion cable

Ø 3.5 mm stereo minijack cable

• When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.

When you input the audio signal via the AUDIO terminal with INPUT 6, set "PC Audio Select" to "Input 6 (HDMI)". (See page 44.)

• To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player or other external equipment using an HDMIcertiﬁ ed cable and set the equipment to 1080p output.

Connecting a Speaker/Ampliﬁ er

INPUT 6

Ampliﬁ er with analog audio input

OUTPUT

ANALOG AUDIO IN

Ampliﬁ er with digital audio input

OPTICAL

DIGITAL AUDIO INPUT

It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 30 for details.) PCM audio outputs from the terminal.

• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.

Audio cable

Optical ﬁ ber cable

AUDIO-R (Red)

AUDIO-L (White)

DIGITAL AUDIO OUT PUT

Page 16

Watching TV

Turning On/Off the Power

Press POWER on the TV, or TV POWER on the remote control unit to turn the power on.

• POWER indicator (Green): The TV is on. (After a few seconds, a window

POWER

TV POWER

(On/Standby)

Initial Setup

When you turn on the TV for the ﬁ rst time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press TV POWER on the remote control unit.

1. Insert the batteries into the remote control unit. (See page 8.)

2. Connect the antenna cable to the TV. (See page 8.)

3. Plug in the AC cord to the AC outlet. (See page 7.)

appears with sound.)

• The initial setup starts when the TV powers on for the ﬁ rst time. If the TV has been turned on before, the initial setup will not be invoked. For changing the settings of the initial setup, perform EZ setup on the Setup menu on page 24.

Press POWER on the TV, or TV POWER on the remote control unit again to turn the power off.

• The TV enters standby and the image on the screen disappears.

• The POWER indicator on the TV turns off.

• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.

• Weak electric power is still consumed even when the TV is turned off.

ENERGY STAR qualiﬁ cation is based on AV MODE "STANDARD".

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

Press c/d to select "Air" or "Cable".

Press ENTER to enter the setting.

Language (Language setting)

Select from among 3 languages: English, French and Spanish.

Press a/b to select the desired language listed on the

screen, and then press ENTER.

Language

TV Location

Air/Cable

CH Search

English

Français

Español

TV Location

Select "Home" or "Store" for the location where you plan to install the TV. This product qualiﬁ es for ENERGY STAR V3.0 in Home mode default setting.

Press c/d to select "Home" or "Store".

Press ENTER to enter the setting.

Home

Store

Home: “Power Saving” is set to "Advanced", and AV

MODE is set to "STANDARD".

“Power Saving” is set to "Off" and AV MODE is set to

Store:

"DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"

regardless of whether Picture Reset is "On" or "Off". If you select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if there is no operation for 30 minutes. When "Off" is selected, AV MODE will be set to "DYNAMIC (Fixed)".

Feature Demo: When “On” is selected, after all the settings are

completed, the Feature Demo screen is displayed if there is no operation for several minutes.

Air

Cable

CH Search (Channel search)

Channel auto search makes the TV look for all channels viewable in the set area.

When "Air" is selected in Antenna setting:

Press c/d to select "Start", and then press ENTER.

Start

Cancel

When "Cable" is selected in Antenna setting: Press a/b to select "Analog & Digital Search Start" to

search both analog and digital broadcasts, or to select “Analog Search Start” to search only analog broadcasts, and then press ENTER.

Analog & Digital Search Start

Analog Search Start

Cancel

• The Channel search will start automatically.

• To exit the Channel search screen, select "Cancel", and

then press ENTER.

•

If no channel is found, conﬁ rm the type of connection made with your TV and try EZ Setup again. (See page 24.)

•

For changing the settings of the initial setup, perform EZ setup on the Setup menu on page 24.

Page 17

Direct Button Operation

Changing Channels

You can change channels by pressing CH

• (DOT).

Examples: To select a 1 or 2-digit channel number (e. g., Channel 5): Press 5 ENT. To select a 3-digit channel number (e. g., Channel 115): Press 1 1 5 ENT. To select a 4-digit channel number (e. g., Channel 22.1): Press 2 2 • (DOT) 1 ENT.

•

When selecting a 1-digit channel number, it is not necessary to press 0 before the number.

•

When you enter 0-9 only, channel selection will be made if there is no operation within a few seconds.

•

If you push "0" by itself, nothing will happen.

•

Complete the above steps within a few seconds.

•

When you enter 0-9 and • (DOT), channel selection will be made if there is no operation within a few seconds.

Changing Volume

You can change the volume by pressing VOLk/l on the TV or on the remote control unit.

•

To increase the volume, press VOLk.

•

To decrease the volume, press VOLl.

Audio status

Output device

Speaker Variable sound Mute

•

When "Output Select" is set to "Variable", the indicator on the screen changes as shown below.

Output Select

Fixed Variable

U/V

or 0-9,

Sleep Timer

Allows you to set a time when the TV automatically switches to standby. Press SLEEP.

•

The remaining time displays when the sleep timer has been set.

•

Each time you press SLEEP, the remaining time switches as shown below.

Off 30 60 90 120

•

When set, the time automatically starts counting down.

•

If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting.

•

When it is 5 minutes before the time expires, the remaining time will start to keep appearing every minute.

•

Select "Off" by pressing SLEEP to cancel the sleep timer.

•

The TV will enter standby when the remaining time reaches 0.

FLASHBACK

Press FLASHBACK to switch to the previously tuned channel.

•

Press FLASHBACK again to switch back to the currently tuned channel.

•

FLASHBACK will not work if no channel has been changed after the TV is turned on.

SURROUND

The surround function produces Surround effect from the speakers. Each time you press SURROUND, the mode changes between On and Off.

On: Makes it possible to enjoy natural, realistic surround

sound.

Off: Outputs the normal sound.

•

You can have the same settings by choosing "Surround" on the menu items. (See page 23.)

FREEZE

Allows you to capture and freeze a moving image that you are watching. Press FREEZE.

•

A moving image is captured.

•

Press FREEZE again to cancel the function.

•

When this function is not available, "No displaying still image available." will display.

•

The still image automatically goes out after 30 minutes.

•

If you are using the freeze function and a broadcast activates the V-CHIP BLOCK, the freeze function will be canceled and a V-CHIP BLOCK message will appear.

•

See page 28 for details on the Output Select function.

MUTE

Mutes the current sound output. Press MUTE.

•

" " will be displayed on the screen for 30 minutes, and the sound is silenced.

•

Within 30 minutes of pressing MUTE, mute can be canceled by pressing VOLk/l or MUTE.

•

Mute will be canceled after 30 minutes have passed. However, the TV will not suddenly output a loud sound as the volume level is set to 0 automatically.

INPUT

To view external source images, select the input using INPUT on the remote control unit or on the TV.

Press

INPUT.

A list of selectable sources appears.

• Press

INPUT again or press a/b to select the input

source.

An image from the selected source automatically displays.

•

Each time INPUT is pressed, the input source toggles.

•

If the corresponding input is not plugged in, you cannot change

•

the input. Be sure to connect the equipment beforehand.

•

See pages 12, 13, 38 and 42 for external equipment connection.

source

Page 18

Direct Button Operation

AV MODE

AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment.

Press AV MODE. Current AV MODE displays.

•

Press AV MODE again before the mode displayed on the screen disappears. The mode changes as shown below:

Example: When the input source is TV, INPUT 1, 2 or 3 terminals

STANDARD MOVIE GAME USER [TV]

DYNAMIC DYNAMIC (Fixed) INTELLIGEN

Example: When the input source is INPUT 4, 5, 6, 7 or 8 terminals

STANDARD MOVIE GAME PC USER[ ]

DYNAMIC DYNAMIC (Fixed) INTELLIGENT

STANDARD: For a highly deﬁ ned image in a normal

lighting.

MOVIE: For a movie. GAME: Lowers image brightness for easier viewing. PC: For PC. USER: Allows the user to customize settings as desired.

You can set the mode for each input source.

INTELLIGENT: Optimizes the image quality automatically

based on the room brightness and image signal.

DYNAMIC (Fixed): Changes the image and sound

settings to the factory preset values. No adjustments are allowed.

DYNAMIC: For a clear-cut image emphasizing high

contrast, useful for sports viewing.

•

You can select a different AV MODE item for each input mode. (For example, select STANDARD for TV input and DYNAMIC for INPUT 1.)

•

When you play games, "GAME" is recommended for AV MODE.

AUDIO

MTS/SAP stereo mode

■

The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information.

You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.

•

Stereo broadcasts: View programs like live sporting events, shows and concerts in dynamic stereo sound.

•

SAP broadcasts: Receive TV broadcasts in either MAIN or SAP sound.

MAIN sound: The normal program soundtrack (either in mono or stereo). SAP sound: Listen to a second language, supplementary commentary or other information. (SAP is mono sound.)

If stereo sound is difﬁ cult to hear.

•

Obtain a clearer sound by manually switching to ﬁ xed mono-sound mode.

You can change MTS as shown below to match the television broadcast signal.

Press AUDIO to toggle between audio modes.

Examples: when receiving MTS and SAP

STEREO mode: STEREO + SAP mode:

MAIN + SAP mode: MONO mode: MONO

Digital broadcasting audio mode

■

The types of audio transmitted in a digital broadcast include SURROUND as well as MONO and STEREO. In addition, it is possible for multiple audio tracks to accompany a single video track.

Press AUDIO to toggle between audio modes.

Example: when receiving Digital broadcasting

STEREO (Audio1) STEREO (Audio2) SURROUND (Audio3)

STEREO MONO

ST(SAP) SAP(ST) MONO

MAIN SAP

•

MTS only operates while in TV mode.

Page 19

Direct Button Operation

POWER SAVING

Allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Press POWER SAVING.

•

Each time you press POWER SAVING, the mode changes as shown below.

Off

Standard

•

You can have the same settings by choosing "Power Saving" on the menu items. (See page 23.)

Advanced

Closed Captions and Digital Closed Captions

Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider.

Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider). It is a more ﬂ exible system than the original Closed Caption system, because it allows for a variety of caption sizes and font styles. When the Digital Closed Caption service is in use, it will be indicated by the appearance of a 3-letter abbreviation that also indicates the language of the Digital Closed Captions: ENG (English), SPA (Spanish), FRA (French) or other language codes.

Not all programs and VHS videotapes offer closed captions. Please look for the “1” symbol to ensure that captions will be shown.

Press CC.

•

This will present the Closed Caption information display.

Press CC while the Closed Caption information is

still on the screen.

•

Press repeatedly until you select the desired closed caption service.

Air DIGITAL

22.1

Audio : MONO

Video 1080i (16:9)

CC 1/2 CC1:

Ratings : NONE

: NONE

•

Depending on the number of caption services in the signal being received, you will see information such as 1/2 or 1/4 displayed. 1/2 means “the ﬁ rst of two services”.

Example:

If a program has three services (Digital CC(ENG), CC1 and Text1), the closed caption display will toggle in this sequence:

1/3 ENG 2/3 CC1 3/3 Text1 Off

•

The CC button keeps a record of the last service selected in its memory. If the last closed caption mode (e.g. 1/3 ENG) you selected is not available for the next program, or on another channel, the closed caption service that is available is automatically selected, and this service appears in parentheses, e.g. “1/3(CC1)”. Closed Caption services that appear in parentheses will not be stored in the CC button's memory as your last selected service. Only services that you have selected with the CC button are stored.

Closed Caption information

In the Closed Caption system, there can be more than one caption service provided. Each is identiﬁ ed by its own number. The “CC1” and “CC2” services display subtitles of TV programs superimposed over the program's picture.

In the Closed Caption system, the “Text1” or “Text2” services display text that is unrelated to the program being viewed (e.g., weather or news). These services are also superimposed over the program currently being viewed.

Examples:

In a case where there are two closed caption services provided (for instance, Digital CC(ENG) and CC1), and Digital CC(ENG) is displayed as your current selection, if Digital CC(ENG) is not broadcast for the next program, the other closed caption service, CC1, will be displayed in parentheses. A closed caption service appears in parentheses because the service you selected is not available and a different service is displayed on your screen. “1/1(CC1)” is displayed instead of “1/2/ENG”.

•

When “Power Saving” is set to “Standard” or “Advanced”, the Power Saving leaf icon appears on the channel information window. See page 23 for details of Power Saving settings.

•

See page 29 for detailed closed caption settings.

•

When the program contains no closed caption, “--” displays in the closed caption information.

•

If the language code, e.g. “ENG”, is not found on Digital TV programs, “--” will be shown.

•

Four kinds of closed caption service (CC1, CC2, Text1, Text2) are potentially available, but a broadcast may contain none or only some of these services at the discretion of the program provider.

•

When the Sidebar Widget, TV+Web or Web is displayed, Closed Captions are not available.

Page 20

Direct Button Operation

VIEW MODE

You can select the screen size.

Press VIEW MODE.

•

The View Mode menu displays.

•

The menu lists the View Mode options selectable for the type of video signal currently being received.

Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu.

•

You can sequentially select a View Mode that has its own aspect ratio.

For 4:3 programs

■

Example: Screen size images

Side Bar S.Stretch (Smart stretch) Zoom Stretch

Suitable for viewing conventional 4:3 programs in their normal format.

For HD programs

■

Stretch: Suitable for viewing wide-screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at

the top and bottom of the screen.

Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the same number of pixels on

the screen.

Full Screen (720p only): You can select "Full Screen" only when receiving a 720p signal. S.Stretch (Smart stretch): Suitable for stretching 4:3 programs to ﬁ ll the screen. Zoom: Suitable for viewing wide-screen 2.35:1 aspect-ratio programs in full screen.

•

When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer portions of the screen. Please change view mode to correct this.

Suitable for stretching 4:3 programs to ﬁ ll the screen.

Suitable for viewing widescreen 2.35:1 anamorphic DVDs in full screen.

This mode is useful for 1.78:1 DVDs. When viewing 1.85:1 DVDs, stretch mode will still show very thin black bands at the top and bottom of the screen.

Page 21

On-Screen Display Menu

On-Screen Display Menu Operation

Example

: Select : Enter

Picture

OPC

Backlight [b12] a16

Contrast

Brightness

Color

Tint

Sharpness

Advanced

Reset

ENTER

LCFONT embedded

Off On

[b30]

[ 0]

a30

[ 0]

a30

[ 0]

a30

[ b2]

a10

: Back

RETURN

The bar above is an operational guide for the remote control. The bar will change in accordance with each menu setting screen.

Press c/d to select the desired item.

Press a/b to select the desired item.

Press c/d to adjust the item.

: Exit

On : Display

b16

b40

b30

b10

Example

Option

AQUOS LINK Setup

Audio Only

PC Audio Select [Input

Auto Volume

Output Select [Fixed]

Caption Setup

Digital Caption Info.

Favorite CH

Channel selecting effect

Demo Mode

Item displayed in yellow

(PC)]

[On]

[On]Clear Voice

[No]Program Title Display

[Off]Operation Lock Out

[No]

• This indicates the item currently selected.

• Press ENTER to go to the adjustment screen for this

item.

Item in brackets

• This indicates the current setting for the item.

Item displayed in white

• This indicates that the item can be selected.

Item displayed in gray

• This indicates that the item cannot be selected. There are various reasons why the items cannot be

selected, but the main reasons are as follows: —Nothing is connected to the selected input terminal. —The function is not compatible with the current input

signal.

•

Menu options differ in the selected input modes, but the operating procedures are the same.

•

The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.

LCFONT:

•

This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easyto-read characters on LCD screens.

Menu Operation Buttons

Using the remote control

Use the following buttons on the remote control to operate the menu.

MENU: Press to open or close the menu screen.

a/b/c/d

ENTER: Press to go to the next step or complete the

RETURN: Press to return to the previous step.

: Press to select a desired item on the screen or

adjust a selected item.

setting.

Using the control panel of the main unit

You can also operate the menu with the control panel of the main unit. Button operations on the control panel correspond to the ones on the remote control as shown below.

MENU: MENU on the remote

control.

INPUT: ENTER on the remote

control.

CHU/V: Cursor a/b on the

remote control.

VOLk/l: Cursor c/d on the

remote control.

Page 22

On-Screen Display Menu

Menu Items

When AV MODE is set to "INTELLIGENT", part of the menu may not be displayed correctly or the setting range of the menu

• may be changed. Some menu items may not be displayed depending on the selected input source.

• When conﬁ guring a menu, be sure to select the input source according to the menu items to be conﬁ gured. If a menu is not

• displayed, check whether one of the following may be the source of the problem.

The TV is connected to the Internet (HTML mode).

Photos or music on a connected USB memory device are being viewed or played back (USB mode).

Audio and video are being inputted to the TV from external HDMI equipment or video is being inputted from a computer

(INPUT 4, 5, 6, 7, 8). The TV is connected to the Internet (HTML mode). Photos or music on a connected USB memory device are being viewed or played back (USB mode).

A TV program is being viewed (TV).

Audio and video are being inputted from external analog equipment (INPUT 1, 2, 3). The TV is connected to the Internet (HTML mode). Photos or music on a connected USB memory device are being viewed or played back (USB mode).

The TV is connected to the Internet (HTML mode).

Picture Menu

OPC ...................................................Page 21

Backlight ............................................Page 21

Contrast .............................................Page 21

Brightness ..........................................Page 21

Color ..................................................Page 21

Tint .....................................................Page 21

Sharpness ..........................................Page 21

Advanced

C.M.S.-Hue .............................Page 21 *

C.M.S.-Saturation ...................Page 21 *

C.M.S.-Value...........................Page 21 *

Color Temp. ...........................Page 21 *

Fine Motion Enhanced ............Page 22 *

Active Contrast .......................Page 22 *

Gamma Adjustment ................Page 22 *

Black Level..............................Page 22 *

Film Mode ...............................Page 22 *

Digital Noise Reduction ...........Page 22 *

3D-Y/C ...................................Page 22 *

Monochrome ..........................Page 22 *

Range of OPC .........................Page 22

Reset .................................................Page 21

Audio Menu

Treble .................................................Page 23

Bass ...................................................Page 23

Balance ..............................................Page 23

Surround ............................................Page 23

Bass Enhancer ...................................Page 23 *

Reset .................................................Page 23

Power Control Menu

Power Saving .....................................Page 23 *

No Signal Off ......................................Page 23 *

No Operation Off ................................Page 23

Setup Menu

EZ Setup ............................................Page 24 *

CH Setup ...........................................Page 24 *

Antenna Setup-DIGITAL .....................Page 24 *

Input Skip ...........................................Page 24

Auto Sync. ........................................Page 44 *

Input Label .........................................Page 24 *

Parental CTRL .............................Pages 25-27 *

Fine Sync. .........................................Page 44

Position ..............................................Page 25 *

Language ...........................................Page 25

Blue Illumination .................................Page 25

Reset .................................................Page 25

Option Menu

AQUOS LINK Setup ...........................Page 35

Audio Only .........................................Page 28

Input Select ........................................Page 28 *

HDMI Setup .......................................Page 28

PC Audio Select .................................Page 44

Auto Volume ......................................Page 28

Clear Voice .........................................Page 28

Output Select .....................................Page 28

Color System .....................................Page 29 *

Caption Setup ....................................Page 29 *

Digital Caption Info. ............................Page 29 *

Program Title Display ..........................Page 29 *

Favorite CH ........................................Page 29 *

Game Play Time .................................Page 29 *

Operation Lock Out ............................Page 29

Channel selecting effect .....................Page 29

Demo Mode .......................................Page 29

Digital Setup Menu

Audio Setup .......................................Page 30 *

Communication Setup ........................Page 47 *

Interactive Service ..............................Page 47 *

Identiﬁ cation .......................................Page 30 *

Software Update .........................Pages 30-31 *

Page 23

On-Screen Display Menu

Picture Menu

Adjusts the picture to your preference with the following picture settings.

Example

Picture

OPC

Backlight [b12] a16

Contrast

Brightness

Color

Tint

Sharpness

Advanced

Reset

Press MENU to display the MENU screen, and then

press c/d to select "Picture".

Press a/b to select a speciﬁ c adjustment item.

Select "Advanced" and then press ENTER to set "C.M.S.-Hue", "C.M.S.-Saturation", "C.M.S.-Value",

"Color Temp.", "Fine Motion Enhanced", "Active Contrast", "Gamma Adjustment", "Black Level", "Film Mode", "Digital Noise Reduction", "3D-Y/C", "Monochrome" or "Range of OPC".

Press a/b(or c/d) to select the desired setting,

and then press ENTER.

Press MENU to exit.

Selected item

Backlight The screen dims The screen

Contrast For less contrast For more contrast Brightness For less

Color For less color

Tint Skin tones

Sharpness For less

•

For resetting all Picture adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER.

Off On

[b30]

a30

[ 0]

a30

[ 0]

a30

[ 0]

a10

[ b2]

button

brightness

intensity

become reddish

sharpness

On : Display

b16

b40

b30

b10

button

brightens

For more brightness For more color intensity Skin tones become greenish For more sharpness

OPC Setting

Automatically adjusts the brightness of the screen.

Off: The brightness is ﬁ xed at the value set in "Backlight". On: Automatically adjusts. On: Display: Displays the OPC effect on the screen while

adjusting the brightness of the screen.

•

When set to "On", the Optical Picture Control (OPC) senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs the OPC sensor, which could affect its ability to sense surrounding light.

•

When set to "On: Display", OPC effect displays on the screen while the OPC adjusts the screen brightness.

•

When set to "On" or "On: Display", the OPC indicator on the TV lights green.

Advanced Picture Setting

This TV provides various advanced functions for optimizing the picture quality.

C.M.S. (Color Management System)

Color tone is managed using the six-color adjustment setting.

C.M.S.-Hue: This is a standard to adjust the color either

more reddish or more bluish in tone.

C.M.S.-Saturation: Increases or decreases the

saturation of a selected color.

C.M.S.-Value: A higher value makes the image brighter.

A lower value makes the image darker.

•

For resetting all adjustment items to the factory preset values, press

ENTER

Color Temp. (Color Temperature)

For a better white balance, use color temperature correction.

High: White with bluish tone Mid-High: Middle: Mid-Low: Low: White with reddish tone

White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color temperature.

R Gain (LO/HI): –30 through +30 G Gain (LO/HI): –30 through +30 B Gain (LO/HI): –30 through +30

•

For resetting all adjustment items to the factory preset values, press

ENTER

to select "Reset", and then press

a/b

to select "Reset", and then press

a/b

Page 24

On-Screen Display Menu

Fine Motion Enhanced

Use Fine Motion Enhanced to view fast-action video more clearly.

On: For obtaining a clearer image. Off: Normal image.

•

Fine Motion Enhanced may cause image noise. If this occurs, turn the function "Off".

Active Contrast

Automatically adjusts the image contrast according to the scene.

On: Automatically adjusts the image contrast. Off: No adjustment.

Gamma Adjustment

Adjusts the differences of picture tones between bright parts and dark parts. The adjustment range of the gamma can be set to a maximum of +2 and a minimum of –2 by pressing c or d.

Black Level

Adjusts on-screen black level to your preferred level.

Low: The black level gets darker. High: The black level gets brighter.

•

"Black Level" is available for input signal from Composite Video, S-Video, Component 480i and analog broadcasts (air and cable).

Film Mode (3:2 pull-down)

Automatically detects a ﬁ lm-based source (originally encoded at 24 frames/second), analyzes it then recreates each still ﬁ lm frame for high-deﬁ nition picture quality.

For LC-46LE700UN/LC-52LE700UN

■

Advanced(High)/Advanced(Low): Select a desired level

to remove jerkiness from ﬁ lm contents.

Standard: Detects, analyzes, converts ﬁ lm source. Off: Normal viewing mode.

•

"Film Mode" does not function when you set the "AV Mode" to "Game".

•

"Standard" does not function when channel display shows an input signal resolution of 480p, 720p or 1080p.

•

"Film Mode" is not available during PC format input.

For LC-40LE700UN

■

On: Detects, analyzes, converts ﬁ lm source. Off: Normal viewing mode.

Digital Noise Reduction

Produces a clearer video image.

Auto: Automatically adjusts the level of noise reduction. High/Middle/Low: Select a desired level for viewing a

clearer video image.

Off: No adjustment.

•

"Digital Noise Reduction" is not available during PC format input.

3D-Y/C

Provides high quality images with minimal dot crawl and cross color noise.

Slow: For still images. Standard: Normal adjustment. Fast: For moving images.

•

3D-Y/C is available for input signal from Composite Video and analog broadcasts (air and cable).

Monochrome

For viewing a video in monochrome.

On: For viewing in monochrome. Off: Normal color.

Range of OPC

The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of –16.

Max.: –15 through +16 Min.: –16 through +15

•

The range of OPC settings are active only when the OPC is set to "On".

•

The maximum setting cannot be set to a smaller number than the minimum setting.

•

The minimum setting cannot be set to a bigger number than the maximum setting.

•

Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.

•

"Film Mode" does not function when you set the "AV Mode" to "Game".

•

"Film Mode" is not selectable when channel display shows an input signal resolution of 480p, 720p, or 1080p.

Page 25

On-Screen Display Menu

Audio Menu

You can adjust the sound quality to your preference with the following settings.

Example

Audio

Treble

Bass

Balance

Surround

Bass Enhancer

Reset

[ 0]

a15

Press MENU to display the MENU screen, and then

press c/d to select "Audio".

Press a/b to select a speciﬁ c adjustment item.

Select "Surround" or "Bass Enhancer" and then press

• ENTER to set each item.

Press a/b (or c/d) to select the desired setting,

and then press ENTER.

Press MENU to exit.

b15

[Off]

[On]

Power Control Menu

Power control setting allows you to save energy.

Example

Power Control

Power Saving

No Signal Off

No Operation Off

Press MENU to display the MENU screen, and then

press c/d to select "Power Control".

Press a/b to select a speciﬁ c adjustment item,

and then press ENTER.

Press a/b (or c/d) to select the desired setting,

and then press ENTER.

Press MENU to exit.

Power Saving

This function allows you to set the Power Saving level in order to decrease the power consumption and

increase the backlight lifespan.

Standard: Optimizes power reduction based upon video

content. When set to "Standard", " screen.

Advanced: Optimizes power reduction based upon video

content and engages OPC. When set to "Advanced",

" appears on the screen.

Off: This function does not work.

[Off]

[Disable]

" appears on the

Selected item Treble For weaker treble For stronger treble

Bass For weaker bass For stronger bass

Balance

•

Audio menu is grayed out when Output Select is set to "Variable". (See page 28.)

•

For resetting all Audio adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER.

button

Decrease audio from the right speaker

Surround

Surround function allows you to enjoy realistic "live" sound.

On: Surround function is on. Off: Normal sound.

•

You can choose Surround by pressing SURROUND on the remote control unit. (See page 15.)

•

Audio menu is grayed out when Output Select is set to "Variable". (See page 28.)

•

For some discs, setup may be required on your DVD player. In this case, please refer to the operation manual of your DVD player.

Bass Enhancer

This function allows you to enjoy bass-enhanced sound.

On: Bass Enhancer function is on. Off: Normal sound.

•

Audio menu is grayed out when Output Select is set to "Variable". (See page 28.)

button

Decrease audio from the left speaker

•

"Power Saving" does not function when you set "AV MODE" to "DYNAMIC (Fixed)".

•

You cannot select a different Power Saving item for each AV MODE.

When “Power Saving” is set, the “OPC” settings for all AV Modes will automatically change.

—If you set “OPC” to “On” when “Power Saving” is set

to “Standard”, then the “Power Saving” setting will change to “Advanced”.

—When you change the “Power Saving” setting from

“Advanced” to “Off” or to “Standard”, “OPC” will be set to “Off”.

—“DYNAMIC (Fixed)” will remain set to “Off”.

•

When "Power Saving" is set to "Standard" or "Advanced", the Power Saving leaf icon appears to the left of "OPC" in the Picture menu screen.

•

You can select Power Saving by pressing POWER SAVING on the remote control unit. (See page 17.)

No Signal Off

When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes.

•

When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.

•

"Disable" is the factory preset value.

•

When a TV program ﬁ nishes, this function may not operate.

No Operation Off

When set to "Enable", the power will automatically shut down if there is no operation for 3 hours.

•

When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.

•

"Disable" is the factory preset value.

Page 26

On-Screen Display Menu

Setup Menu

Example

Setup

EZ Setup

CH Setup

Antenna Setup-DIGITAL

Input Skip

Parental CTRL

Position

Language

Blue Illumination

Reset

Press MENU to display the MENU screen, and then

press c/d to select "Setup".

Press a/b to select a speciﬁ c adjustment item,

and then press ENTER.

When you select "EZ Setup", "CH Setup", "Parental

• CTRL" or "Reset", you can enter the 4-digit secret number here. See page 25 for setting a secret number.

Press a/b (or c/d) to select the desired setting,

and then press ENTER.

Press MENU to exit.

EZ Setup

You can run EZ Setup again, even after setting up the preset channels.

Language: Select from among 3 languages (English,

French and Spanish).

TV Location: Select "Home" or "Store" for the location

where you plan to install the TV. This product qualiﬁ es for ENERGY STAR V3.0 in Home mode default setting.

Home: “Power Saving” is set to "Advanced", and AV MODE is

set to "STANDARD".

Store: “Power Saving” is set to "Off" and AV MODE is set to

"DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set. Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"

Feature Demo: When “On” is selected, after all the settings

are completed, the Feature Demo screen is displayed if there is no operation for several minutes.

ENERGY STAR qualiﬁ cation is based on AV MODE

• "STANDARD".

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for

all channels viewable in the set area.

[English]

[On]

CH Setup

If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for

all channels viewable in the set area.

CH Memory: You can select the channels to skip in each

ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and DIGITAL (Cable).

On: Skips channels. (Channel selection disabled using CH

U/V

Off: Does not skip channels. (Channel selection enabled using

CHU/V.)

Remove Scrambled CH: This function makes the TV

look for and then delete digital cable channels that are scrambled and so unavailable in the set area. The process may take more than 20 minutes.

Yes: Starts to remove scrambled channels. No: This function does not work.

•

See "Initial Setup" on page 14 for setting each item.

•

If no channel is found, conﬁ rm the type of connection made with your TV and try channel search again.

•

If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.

Antenna Setup-DIGITAL

In order to receive digital air broadcasts, you need a digital broadcast antenna. You can conﬁ rm the antenna conﬁ guration through the "Antenna SetupDIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength.

Signal Strength: The signal strength of DIGITAL channel

is displayed. The signal information is based on the current channel.

Channel Strength: Input the 2-digit channel number

to check the signal strength of the selected channel. Make sure the signal is strong enough for each channel.

This function is available for DIGITAL (Air) only.

•

Input Skip

This setting allows you to skip the HDMI or PC-IN Input ("Input 4 (PC)", "Input 5 (HDMI)", "Input 6 (HDMI)", "Input 7 (HDMI)" and "Input 8 (HDMI)") on the Input Selection operation.

Yes: Skips the input. No: Does not skip input.

Input Label

Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Press

a/b/c/d

mode.

•

Using the software keyboard, you can enter up to 10 characters for text. (See page 48.)

to select the new name for the input

•

See "Initial Setup" on page 14 for setting each item.

•

If no channel is found, conﬁ rm the type of connection made with your TV and try EZ Setup again.

•

If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.

•

You cannot change labels if the INPUT SOURCE is TV.

Page 27

On-Screen Display Menu

Position

For adjusting a picture's horizontal and vertical position.

H-Pos.: Centers the image by moving it to the left or

right.

V-Pos.: Centers the image by moving it up or down.

•

For resetting adjustments to the factory preset values, press a/b to select "Reset", and then press ENTER.

•

When connecting a PC to the HDMI terminal, the image position will be automatically adjusted. It cannot be manually adjusted.

•

The screen position variable ranges depend on the View Mode or the signal type. The ranges can be seen on the position-setting screen.

•

Adjustments are stored separately according to input source.

Language

You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish.

Blue Illumination

When this function is set to "On", the LED on the front of the TV turns on.

•

"On" is the factory preset value. If you want to turn off the LED, set the function to "Off".

Reset

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

"Return to the factory preset values" displays on the

screen.

If you have already set the Secret No., input the 4-digit

• secret number here.

Select "Yes".

"Now, TV will restart automatically. OK?" displays on the

• screen.

Select "Yes".

"Now initializing..." displays on the screen and blinks.

• After the reset has been completed, the power shuts off and then comes back on. The screen will have returned to its original settings.

•

The Channel Setup settings will not be changed.

•

The Language settings will not be changed.

•

The Secret number settings will not be changed.

•

The TV Location settings will not be changed.

Parental CTRL (Parental Control Setting)

Secret No.

Allows you to use a secret number to protect certain settings from being accidentally changed.

IMPORTANT:

Three conditions must be met to enable the V-Chip (see pages 26 to 27):

Secret No. is registered.

V-Chip/V-Chip (DTV Only) settings have been made.

The “V-Chip (DTV Only)” will only be selectable when a new

• rating system can be downloaded via digital broadcasting in the U.S.

3. "

Status" is set to "On".

New Secret No.

■

You can set and change the secret number by using 0-9.

Input Secret No.: When you change the secret number,

enter the old 4-digit secret number here. The cursor moves to "New Secret No.".

New Secret No.: When you set the new secret number,

enter the new 4-digit secret number here. The cursor moves to "Reconﬁ rm".

Reconﬁ rm: Enter the same 4-digit number you set in

"New Secret No.".

Secret No. Clear

■

You can clear your secret number.

Yes: Your secret number is cleared. No: Your secret number is not cleared.

•

As a precautionary measure, make a note of your secret number and keep it in a familiar place.

•

If the secret number is cleared, the Status setting automatically sets to "Off". "V-Chip" and "Status" will not be selectable from the menu.

Status

Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not ﬁ rst conﬁ gure your secret number.

On: Enables Parental CTRL. Off: Disables Parental CTRL.

Page 28

On-Screen Display Menu

V-Chip

V-CHIP is an electronic ﬁ ltering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not ﬁ rst conﬁ gure your secret number.

•

The U.S. has two rating systems for viewing content: TV Parental Guidelines and movie ratings.

•

The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate television shows from their children.

•

Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as watched on cable TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.

•

The setting automatically enters "Block" for any ratings below your selection.

•

If Status is not set to "On", the conﬁ guration settings will not work.

MPAA (Voluntary movie rating system)

■

Example

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

Press a/b to adjust the item to your desired position. "

" indicates the item is blocked. Press MENU to exit.

G: General audiences. All ages admitted. PG: Parental guidance suggested. Some material may not be

suitable for children.

PG-13: Parents strongly cautioned. Some material may be

inappropriate for children under 13.

R: Restricted. Under 17 requires accompanying parent or

adult guardian (age varies in some jurisdictions).

NC-17: No one 17 and under admitted. X: X is an older rating that is uniﬁ ed with NC-17 but may be

encoded in the data of older movies.

PG-13

NC-17

NONE

TV Parental Guidelines

■

Example

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

NONE

Pressa/b to adjust the item to your desired position. "

" indicates the item is blocked. Press MENU to exit.

Suggested age

TV-Y: All children. TV-Y7: Directed to older children. TV-G: General audience. TV-PG: Parental Guidance suggested. TV-14: Parents strongly cautioned. TV-MA: Mature audience only.

Example

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

NONE

When setting an individual content-based rating item:

Press d or ENTER to access blocked content

items from the currently selected age-based rating item.

Pressa/b to select an individual item, and then

press ENTER to unblock it (" " is removed). Repeat the same steps for the other items.

Press c or RETURN to register after all individual

content rating items are set.

Content

FV: Fantasy violence. V: Violence. S: Sexual situation. L: Adult language. D: Sexually suggestive dialog.

•

Voluntary movie rating system only uses an age-based rating.

Rating

FV V S L

TV-Y

TV-Y7

Content

Suggested age



TV-G

TV-PG

TV-14

TV-MA

: The content rating can be set, but this rating is not

normally broadcast by TV stations.

: Content rating can be set.

Page 29

On-Screen Display Menu

Canadian Rating Systems (Canadian English ratings and Canadian French ratings)

•

The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming.

•

While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.

•

When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian French ratings.

Canadian English Ratings

■

Example

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

C8+

14+

18+

NONE

Press a/b to adjust the item to your desired position. " " indicates the item is blocked. Press MENU to exit.

E: Exempt: Includes news, sports, documentaries and other

information programming; talk shows, music videos, and variety programming.

C: Children: Intended for younger children under the age of 8

years. Pays careful attention to themes that could threaten their sense of security and well-being.

C8+: Children over 8 years old: Contains no portrayal

of violence as the preferred, acceptable, or only way to resolve conﬂ ict; nor encourage children to imitate dangerous acts which they may see on the screen.

G: General: Considered acceptable for all age groups.

Appropriate viewing for the entire family, contains very little violence, physical, verbal or emotional.

PG: Parental Guidance: Intended for a general audience, but

may not be suitable for younger children (under the age of 8) because it could contain controversial themes or issues.

14+: Over 14 years: Could contain themes where violence

is one of the dominant elements of the storyline, but it must be integral to the development of plot or character. Language usage could be profane and nudity present within the context of the theme.

18+: Adults: Intended for viewers 18 years and older and

might contain depictions of violence, which while related to the development of plot, character or themes, are intended for adult viewing. Could contain graphic language and portrayals of sex and nudity.

Canadian French Ratings

■

Example

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

8ans+

13ans+

16ans+

18ans+

NONE

Press a/b to adjust the item to your desired position. "

" indicates the item is blocked. Press MENU to exit.

E: Exempt programming. G: General: All ages and children, contains minimal direct

violence, but may be integrated into the plot in a humorous or unrealistic manner.

8ans+: General but inadvisable for young children: May

be viewed by a wide public audience, but could contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations.

Recommended for viewing with parent. 13ans+: Over 13 years: Could contain scenes of frequent

violent scenes and therefore recommended for viewing with parent.

16ans+: Over 16 years: Could contain frequent violent scenes

and intense violence.

18ans+: Over 18 years: Only for adult viewing. Could contain

frequent violent scenes and extreme violence.

How to temporarily release the V-CHIP BLOCK

■

When the V-CHIP BLOCK is working and censors a broadcast, "V-CHIP HAS BEEN ACTIVATED." displays.

Press ENTER while the V-CHIP is working, and

then the secret number setting menu displays.

Input the 4-digit secret number by using 0–9. At this

time V-CHIP BLOCK temporarily releases.

Reactivating the temporarily released V-CHIP

■

BLOCK

You can reactivate the temporarily released V-CHIP BLOCK as shown below.

•

Select "Status" setting from the Parental CTRL menu to reactivate BLOCK. (See page 25.)

•

Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can. English Ratings" or "Can. French Ratings") from the Parental CTRL to reactivate BLOCK. (See pages 25 to 26.)

•

Switch off the TV power.

•

Performing any of the three above will activate the V-CHIP BLOCK.

Page 30

On-Screen Display Menu

Option Menu

Example

Option

AQUOS LINK Setup

Audio Only

PC Audio Select

Auto Volume

Clear Voice

Output Select

Caption Setup

Digital Caption Info.

Program Title Display

Favorite CH

Game Play Time

Operation Lock Out

Channel selecting effect

Demo Mode

Press MENU to display the MENU screen, and then

press c/d to select "Option".

Press a/b to select a speciﬁ c adjustment item and

then press ENTER.

Press a/b (or c/d) to select the desired setting,

and then press ENTER.

Press MENU to exit.

Skip this step for "Audio Only".

•

Audio Only

When listening to music from a music program, you can turn the screen off and enjoy audio only.

On: Audio is output without screen image. Off: Both screen images and audio are output.

•

The screen image will return to normal when a button (except those for audio adjustment, such as VOL, MUTE, SURROUND, AUDIO) is pressed.

Auto Volume

Different sound sources sometimes do not have the same volume level, such as a program and its commercial breaks. The Automatic Volume Control (Auto Volume) reduces this problem by equalizing levels.

Clear Voice

This function emphasizes speech against background noise for greater clarity.

[Input 4 (PC)]

[On]

[Fixed]

[No]

[Off]

[No]

Input Select

If the image does not come in clearly from the external equipment connected to INPUT 1 or INPUT 2, you may need to change the input signal type setting on the "Input Select" menu.

INPUT 1

■

Select the input signal type from the list below:

Auto/COMPONENT/VIDEO

INPUT 2

■

Select the input signal type from the list below:

Auto/COMPONENT/S-TERMINAL

•

If the selected signal type is incorrect, images are not displayed at all or are displayed without any color.

•

Refer to your external equipment operation manual for the signal type.

•

If you set INPUT 1 or 2 to Auto, the TV will automatically select the input signal.

•

Setting INPUT 1 or 2 signal selection to "Auto" when other equipment is connected will result in the following connection priority.

INPUT 1:

1 COMPONENT VIDEO 2 VIDEO

INPUT 2:

1 COMPONENT VIDEO 2 S-VIDEO

HDMI Setup

To watch an HDMI or PC-IN equipment image, select "INPUT5", "INPUT6", "INPUT7" or "INPUT8" from INPUT SOURCE menu using INPUT on the remote control unit or on the TV.

Auto View:

Enable: To use View Mode based on signal

recognition, including an HDMI signal.

Disable: No function.

•

Refer to your external equipment operation manual for the signal type.

•

When connecting an HDMI-DVI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

Output Select

Allows you to select what controls the audio output.

Fixed: Sound via speaker is adjusted with VOLk/l on

the remote control unit or VOLk/l on the TV.

Sound via the AUDIO OUTPUT terminal is not

adjustable and outputs at a consistent level.

Variable: Sound via the AUDIO OUTPUT terminal is

adjusted with VOLk/l on the remote control unit or

VOLk/l on the TV.

Sound via speaker is muted.

Page 31

On-Screen Display Menu

Color System

Select the video signal system compatible with your equipment from the list below:

Auto/NTSC/PAL-M/PAL-N

•

"Color System" can only be set for the INPUT 1 VIDEO, INPUT 2 S-VIDEO and INPUT 3 VIDEO.

•

If you have already set the Secret No., input the 4-digit secret number here. See page 25 for setting a secret number.

Caption Setup

This function allows you to adjust the closed caption screen appearance to suit your preference. You can adjust 7 items: "Caption Size", "Font Style", "Foreground Color", "Foreground Opacity", "Background Color", "Background Opacity" and "Character Edge".

Example:

Selectable items available for "Font Style".

Default: The font speciﬁ ed by broadcasting station or

default font.

Type 0: Proportional font used in the MENU screen. Type 1: Monospaced with serifs. Type 2: Proportionally spaced with serifs. Type 3: Monospaced without serifs. Type 4: Proportionally spaced without serifs. Type 5: Casual font type. Type 6: Cursive font type. Type 7: Small capitals.

Operation Lock Out

This function locks the operation buttons on the TV and the remote control.

Off: No adjustment. RC Control Lock: All buttons on the remote control are

locked.

Button Control Lock: All buttons on the TV, except

POWER, are locked.

•

To unlock the buttons on the remote control, press MENU on the TV, and then select "Off" on the MENU screen.

•

To unlock the buttons on the TV, press MENU on the remote control, and then select "Off" on the MENU screen.

Favorite CH (Favorite Channel Setting)

This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily.

To register your favorite channel:

Select "Register" and then press ENTER. Press a/b/c/

to select the position in the category, and then press

ENTER to register.

To delete your favorite channel: Select "1 Data Clear" and then press ENTER. Press

a/b/c/d

then press ENTER. Select "Yes" and then press ENTER.

To delete all the favorite channels, select "All Data Clear".

to select the channel you want to delete, and

•

For resetting adjustments to the factory preset values, press a/b to select "Reset", and then press ENTER.

•

The default value depends on the broadcasting station.

Digital Caption Info. (Digital Caption Information)

This function allows viewing of digital closed caption information for the digital broadcast program being viewed.

•

This list is not displayed for analog broadcasts or external input audio/video.

•

This information is not included in CC1, CC2, Text1, or Text2, and is not displayed in a list.

Program Title Display

Select the CH display when changing channels for digital broadcasting.

Yes: "Program Info." displays. No: "Program Info." does not display.

Game Play Time

This function displays the elapsed game time so you do not lose track of the time. To display the elapsed time, select "GAME" for the AV MODE before starting the game.

On: The elapsed time is displayed every 30 minutes when

you switch to GAME mode in external input mode.

Off: No adjustment.

•

Before setting the channel, select the channel you want to register as a favorite channel.

•

You can display the "Favorite CH" screen by pressing FAVORITE on the remote control.

Channel selecting effect

You can select whether to use transition effects when changing channels.

Yes: A transition effect is used when the channel is changed. No: No function.

Demo Mode

You can select the image from several types of demo mode.

120Hz Demo/LED Demo/Net/Feature Demo/ Auto Play

If you select "Auto Play", you need to set playback type.

Continuous: Play Demos continuously. 10 min.: Play Demos every 10 minutes. 20 min.: Play Demos every 20 minutes.

•

This function will be canceled when you press EXIT on the remote control unit.

•

When "Demo Mode" is set to "Net" or "Feature Demo", pressing FREEZE pauses/restarts demo.

•

"Demo Mode" may not be selected depending on input signal type.

•

"Demo Mode" may be automatically canceled depending on input signal type.

Page 32

On-Screen Display Menu

Digital Setup Menu

This setting allows you to optimize the settings of Digital broadcasting.

Example

Digital Setup

Audio Setup

Communication Setup

Interactive Service

Identiﬁcation

Software Update

Press MENU to display the MENU screen, and then

press c/d to select "Digital Setup".

Press a/b to select a speciﬁ c adjustment item,

and then press ENTER.

Press a/b (or c/d) to select the desired setting,

and then press ENTER.

Press MENU to exit.

Audio Setup

You can output digital audio to an AV ampliﬁ er or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected.

PCM: The optical output terminal outputs audio signal

in PCM form. If your digital audio system does not support Dolby Digital, select "PCM".

Dolby Digital: The optical output terminal outputs audio

signal in Dolby Digital form. It reproduces sound from surround program of digital.

Identiﬁ cation

The current version of the TV software is displayed.

[PCM]

[Yes]

Software Update

This function allows software updates by inserting a USB memory device with the update ﬁ le into the USB terminal on the TV. To check for the availability of a software update, visit www.sharpusa.com. If you have any questions, please call 1-800-BE-SHARP (800-237-4277).

CAUTION

•

Do not remove the USB memory device or unplug the AC cord while the software is being updated.

•

Be sure to properly follow the whole procedure described below, step by step. Otherwise, for example, the TV cannot read the data in the USB memory device and software updating will fail.

Insert the USB memory device with the update ﬁ le

into the USB terminal on the TV.

Press MENU to display the MENU screen, and

then press c/d to select “Digital Setup”.

Press a/b to select “Software Update”, and then

press ENTER.

•

If you have already set the Secret No., go to step 4.

Digital Setup

Audio Setup

Communication Setup

Interactive Service

Identiﬁcation

Software Update

Input the 4-digit secret number by using 0–9.

Digital Setup

Secret No.

[PCM]

[Yes]

aaaa

Page 33

On-Screen Display Menu

Press ENTER to start checking the data in the

USB memory device.

Insert the USB memory device containing

the software update ﬁle.

Checking

Start update?

“

Checking” blinks.

During the data checking,

Now checking the data in the USB memory device.

• The current version of the TV software and the version of the update ﬁ le on the USB memory device are displayed. To update the TV software with the update ﬁ le, select “Yes”, and then press ENTER.

Example

Software update ﬁle is detected

in the USB memory device.

Current Version: UXXXXXX1 Update Version: UXXXXXX2

Yes

• If the USB memory device is not properly installed or the correct update ﬁ le cannot be found on the USB memory device, an error message is displayed.

Check the ﬁ le on the USB memory device, and then

reinsert the USB memory device correctly.

Press ENTER to start updating.

• The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord.

The picture will temporarily go dark until

the Software Update display appears.

Wait several minutes and do not unplug the AC cord.

Example

Now updating

Do not unplug AC cord.

Update Version UXXXXXX2

30%

CAUTION

• Do not remove the USB memory device or unplug the AC cord while the software is being updated.

When the software is successfully updated, a

screen is displayed indicating that the update process is completed.

After this screen is displayed, the TV automatically turns off and then turns on again.

Example

Software update is complete.

Update Version UXXXXXX2

Software update ﬁle is not detected

in the USB memory device.

Conﬁrm that you have transferred the ﬁle

to the USB memory device and retry software update.

There is more than one software ﬁle

in the USB memory device.

Conﬁrm that only the software update ﬁle is

in the USB memory device.

• If the update has failed, check the ﬁ le in the USB memory device and try Software Update again.

Failed to complete update. Retry Software Update. If system Update fails again, contact the customer service center.

After the screen shown below is displayed, press

ENTER.

System software was successfully updated.

Remove the USB memory device.

Page 34

Enjoying photo and music playback

USB memory device compatibility

You can enjoy viewing photos and listening to music from external USB memory devices.

Depending on the USB memory device, the TV may not be able to recognize the recorded data.

• Use only alphanumeric characters for naming ﬁ les.

• File names over 80 characters (may vary depending on character set) may not be displayed.

• Do not remove a USB memory device or memory card from the TV while transferring ﬁ les, using the slide show function, or

• switching screens, or before you exit "USB" from the INPUT SOURCE menu. Do not insert and remove a USB memory device to and from the TV repeatedly.

•

Viewing photos and listening to music

Insert the USB memory device with recorded photos or music into the USB terminal on the TV.

The display varies depending on the type of data recorded

• in the USB memory device.

When the USB memory device contains both

■

photos and music ﬁ les

Thumbnails of the photos are displayed.

Sample

When there are multiple folders on the USB memory

• device, the data in the folder in which the ﬁ rst photo is read is displayed. To play back a music ﬁ le, select "Change to Music Mode"

• on the USB MENU screen. (See page 34.)

When the USB memory device contains only

■

music ﬁ les

An error message is displayed.

To play back a music ﬁ le, select "Change to Music Mode"

• on the USB MENU screen. (See page 34.)

Displaying data with the INPUT SOURCE menu screen

Press MENU to display the INPUT SOURCE menu

screen.

Press INPUT again or press a/b to select "USB".

• The display varies depending on the type of data recorded in the USB memory device.

You cannot enter this mode when a USB memory device is

• not inserted into the TV. "VIEW MODE" is ﬁ xed during this mode.

• "USER (USB)" is the default value for the "AV MODE"

• setting. Each time you press AV MODE, the mode changes between "USER (USB)", "DYNAMIC (Fixed)", "DYNAMIC" and "STANDARD".

USB memory device

File system FAT/FAT32 Photo ﬁ le

format Music ﬁ le

format

Progressive format jpeg ﬁ les are not supported.

• Music ﬁ les in USB 1.1 devices may not be played properly.

• Operation using USB hubs is not guaranteed.

•

USB Memory, USB card reader (Mass Storage class)

JPEG (.jpg) (DCF2.0 compliant)

MP3 (.mp3) Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 96k, 112k, 128k, 160k, 192k, 224k, 256k, 320kbps Sampling frequency: 32k, 44.1k, 48kHz

Page 35

Enjoying photo and music playback

Photo Mode

Music Mode

Viewing Thumbnails

Sample

Buttons Description

ENTER When selecting the folder icon with the

a/b/c/d

A (red) Go back to the previous page. B (green) Go to the next page. C (blue) Start the slide show. D (yellow) Display the USB MENU screen.

When there are invalid photo ﬁ les, the X mark will be

• displayed for the ﬁ le. You can see the ﬁ le name, shooting date, ﬁ le size and pixel

• size of the selected photo in the lower-left corner of the screen (shooting date is only available in the EXIF ﬁ le format).

mark: Go back to the parent directory. When selecting a folder icon: Enter this directory. When selecting a photo thumbnail: Display the photo in full screen.

Select a desired item.

Select Music

ROOT CLASSIC SONG_01.MP3 SONG_02.MP3

SONG_03.MP3

SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 SONG_08.MP3

Buttons Description

ENTER When selecting the folder icon with the

mark: Go back to the parent directory. When selecting a folder icon: Enter this directory.

a/b d c

When selecting a music ﬁ le: Play music. Select a desired item. Page up. Page down.

A (red) Stop music. B (green) Play/Pause music. D (yellow) Display the USB MENU screen.

When there are invalid music ﬁ les, the X mark will be

• displayed for the ﬁ le. The displayed play time may differ slightly from the actual

• play time depending on the ﬁ les.

Viewing Photos in Full Screen

The photo selected on the thumbnail selection screen is displayed in full screen.

Buttons Description

c/d

RETURN Return to the thumbnail selection screen. A (red) Rotate the photo by 90 degrees to the left. B (green) Rotate the photo by 90 degrees to the right. C (blue) Reveal/hide the Guide Display. D (yellow) Display the USB MENU screen.

Rotating photos only applies to the temporarily selected

• item and this setting is not saved.

Go to the previous/next photo in the same directory.

Slide Show

The photos displayed on the thumbnail selection screen are displayed as a slide show.

Buttons Description RETURN Return to the thumbnail selection screen. C (blue) Reveal/hide the Guide Display. D (yellow) Display the USB MENU screen.

The selected BGM is played repeatedly.

•

The slide show continues until you press RETURN.

• For setting the slide show speed, select "Slide Show

• Interval" on the USB MENU screen. (See page 34.)

Page 36

Enjoying photo and music playback

USB Menu

USB MENU

Change to Music Mode

Select USB Drive [Drive1] Slide Show Interval [10sec] Select Slide Show Image Select Slide Show BGM Select Auto Play Music

The display varies depending on the selected mode.

When Photo mode is selected, "Change to Music Mode" is displayed. When Music mode is selected, "Change to Photo Mode" is displayed.

Slide Show Interval

Specify the length of time before the next image appears.

Press D to display the USB MENU screen.

Press a/b to select "Slide Show Interval", and

then press ENTER.

Press

a/b

to select the length of time, and then

press ENTER.

Select Slide Show Image

Select the images to be displayed.

Press D to display the USB MENU screen.

Press a/b to select "Select Slide Show Image",

and then press ENTER.

• The image selection screen is displayed.

Press

a/b/c/d

to select the images, and then

press ENTER.

• Checkmarks are added to the selected images.

Sample

Change to Photo Mode/Music Mode

Change the mode.

Press D to display the USB MENU screen.

Press a/b to select "Change to Photo Mode"/

"Change to Music Mode", and then press ENTER.

•

The display varies depending on the selected mode.

When Photo mode is selected, "Change to Music

Mode" is displayed.

When Music mode is selected, "Change to Photo

Mode" is displayed.

• Each time ENTER is pressed, the setting changes

between Photo Mode and Music Mode

Select USB Drive

If the inserted USB memory device contains multiple drives, select the drive you want to display or play back.

Press D to display the USB MENU screen.

Press a/b to select "Select USB Drive", and then

press ENTER.

Press

a/b/c/d

to select the drive, and then press

ENTER.

Drive1 Drive2 Drive3 Drive4

Drive5 Drive6

Press C to start the slide show.

All of the images are selected by default.

• If no images have been selected, "No Images" is displayed

• and the slide show does not start.

Up to 16 drives can be displayed.•

Page 37

Enjoying photo and music playback

Select Slide Show Background Music

You can select the music to be played in the background while the slide show is being displayed.

Press D to display the USB MENU screen.

Press a/b to select "Select Slide Show BGM",

and then press ENTER.

• The list screen is displayed.

Select the music.

• Checkmarks are added to the selected music.

Select BGM

ROOT CLASSIC SONG_01.MP3 SONG_02.MP3

SONG_03.MP3

SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 SONG_08.MP3

Select Auto Play Music

You can select the music to be played back

Press D to display the USB MENU screen.

Press a/b to select "Select Auto Play Music", and

then press ENTER.

• The list screen is displayed.

Select the music.

• Checkmarks are added to the selected music.

Buttons Description

ENTER When selecting the folder icon with the

a/b d c

D (yellow) Display the USB MENU screen.

Press C to play back the selected music.

All of the music ﬁ les are selected by default.

• If no music ﬁ les have been selected, "No Playable Files" is

• displayed and the music is not played back automatically.

mark: Go back to the parent directory. When selecting a folder icon: Enter this directory. When selecting a music ﬁ le: Play music.

Select a desired item. Page up. Page down.

• Use the following buttons to select the music.

Buttons Description

ENTER When selecting the folder icon with the

a/b d c

D (yellow) Display the USB MENU screen.

Press C to start the slide show and the background

mark: Go back to the parent directory. When selecting a folder icon: Enter this directory. When selecting a music ﬁ le: Play music.

Select a desired item. Page up. Page down.

music.

All of the music ﬁ les are selected by default.•

Page 38

Other Viewing Options

Presetting Remote Control Function

You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit.

1 2

3 44

Presetting manufacturer codes

Press FUNCTION until the LED for your device

lights up.

After the LED for your device lights up, press

FUNCTION and DISPLAY at the same time to enter the code registration mode. The LED will blink.

Press 0–9 to enter the manufacturer code. (See

page 37.)

• Preset mode is ﬁ nished once the LED no longer lights up.

After registering the code, the LED will stop blinking

then turn off after one second. (If you perform an incorrect operation, the LED will blink quickly then turn off.)

6 7 8 9

13 14

Operating the Connected Equipment

To operate the connected equipment, press FUNCTION to select the LED for your device. (VCR, AUDIO, CBL/SAT (cable converter) or BD/DVD.) The LED lights up, and the remote control unit button will function as follows.

• When you operate VCR or DVD, press INPUT to select the

terminal connected to your device.

• CABLE and SAT cannot be selected at the same time.

1 SOURCE POWER

• Turns the connected equipment power on and off.

*

• Rewinds the tape and allows picture search. (VCR)

• Hold down to go in reverse. (

3 REC

• Starts recording. (VCR)

• Pressing quickly once takes you to the start of the chapter currently playing. Each time you press it, you move back to the start of the previous chapter. (

5 0–9 (CBL/SAT), • (DOT) (SAT)

• Press a button (or buttons) that corresponds to the channel that you wish to watch.

• Starts playback. (VCR, BD/DVD)

• Rapidly advances the tape and allows picture search. (VCR)

• Hold down to fast forward. (BD/DVD)

)

• Sets pauses and still pictures. (VCR, BD/DVD)

• Stops the tape transport. (VCR)

• Playback stops when pressed. With some DVD players, pressing the button twice may open the disc tray. (BD/ DVD)

• Pressing quickly once takes you to the start of the next chapter. Each time you press it, you move ahead to the start of the next chapter. (BD/DVD)

11 FLASHBACK

• Press to switch between the current channel and the channel you were watching immediately before. Some manufacturers do not preset FLASHBACK. (CBL)

CHU/

• Press CHU or CHV to tune in to a higher or lower

• Press to select the channel of the TV tuner on the VCR.

channel. (CBL)

(VCR)

13 MENU

• When this button is pressed, the DVD menu will display.

a/b/c/d

• a/b/c/d: Press the button to select items on the SAT GUIDE screen or SAT MENU screen. (SAT). Press the button to select items on the DVD MENU screen. (BD/ DVD)

• ENTER: Press to activate the selected function. (SAT, BD/DVD)

, ENTER

BD/

DVD)

BD/

DVD)

Page 39

Other Viewing Options

Manufacturer codes

VCR BRAND

REMOTE CONTROL CODE

NUMBER

DVD/BD/LD BRAND

CATV/SAT BRAND

REMOTE CONTROL CODE

NUMBER

REMOTE CONTROL CODE

NUMBER

• Numbers marked with * are SAT codes, all others are CATV codes.

AUDIO BRAND

REMOTE CONTROL CODE

NUMBER

Page 40

Using AQUOS LINK

Controlling HDMI Equipment Using AQUOS LINK

What’s AQUOS LINK?

• Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV ampliﬁ er, DVD).

• By connecting AQUOS LINK-compatible devices with HDMI-certiﬁ ed cables to the TV, you can control a recorder or AV ampliﬁ er using the remote control of the TV.

• AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.

Example*

HDMI-certiﬁed cable

(commercially available)

Optical ﬁber cable

AQUOS LINK-compatible

Audio system

(commercially available)

HDMI-certiﬁed cable (commercially available)

Connecting AQUOS BD Player via AQUOS

AQUOS BD Player

Point the remote control toward the TV, not to connected HDMI equipment.

•

Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-certiﬁ ed cable.

•

Up to 3 pieces of HDMI recording equipment and one AV ampliﬁ er can be connected using this system.

•

These operations affect the HDMI equipment selected as the current input source. If the equipment does not operate, turn on

•

the equipment and select the appropriate input source using INPUT.

LINK-compatible Audio system

* You can use the INPUT 5,

6, 7 or 8 terminal.

You can operate AQUOS LINK-compatible devices with the remote control unit when the FUNCTION of the remote control unit is set to TV.

REC STOP and OPTION buttons will function only when AQUOS LINK is used.

One Touch Play

■

While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.

One Touch Recording

■

Press REC while you are viewing a broadcast received with the AQUOS LINK-compatible recorder. The AQUOS LINK automatically recognizes the connected HDMI device and starts recording.

The above description is an example of the AQUOS LINK function.

•

The steps in “AQUOS LINK Setup” on page 39 need to be completed beforehand.

•

Refer to this operation manual and the operation manual of the AQUOS LINK device to be used with this TV.

•

Single remote control

■

The AQUOS LINK automatically recognizes the connected HDMI device and you can control the TV and the devices as if using a universal remote control.

Control the AQUOS LINK-compatible audio system

■

Set the volume of AQUOS LINK-compatible audio system.

Page 41

Using AQUOS LINK

AQUOS LINK Setup

Press MENU to display the MENU screen, and then

press c/d to select "Option".

Press a/b to select “AQUOS LINK Setup”, and

then press ENTER.

Press a/b to select a speciﬁ c item, and then press

ENTER.

Press a/b (or c/d ) to select the desired setting,

and then press ENTER.

Press MENU to exit.

AQUOS LINK Control

Select AQUOS LINK Control to disable AQUOS LINK function even when an AQUOS LINK-compatible HDMI device is connected to the TV. This function prevents the device from starting to operate unexpectedly.

Enable: You can operate AQUOS LINK-compatible

Disable: AQUOS LINK function does not work.

AQUOS LINK Control

Auto Power On

Selecting Recorder

Auto Power On

If this is activated, the One Touch Play function is enabled.

Yes: While the TV is in standby mode, it automatically

No: This function does not work.

AQUOS LINK Control

Auto Power On

Selecting Recorder

equipment.

Enable

Disable

turns on and plays back the image from the HDMI source.

Yes

Selecting Recorder

When multiple AQUOS LINK-compatible devices are connected, this function allows you to set the recorder for recording when you press REC on the TV’s remote control unit.

Press a/b to select the recorder for recording.

Example

AQUOS LINK Control

Auto Power On

Selecting Recorder

Input Location

INPUT5

INPUT6

[1.0.0.0]

[2.0.0.0]

Example : when connecting AQUOS LINK-compatible

recorder via AQUOS LINK-compatible Audio system

AQUOS LINK Control

Auto Power On

Selecting Recorder

Input Location

INPUT55WD

INPUT6

[1.1.0.0]

[2.0.0.0]

When an AQUOS LINK-compatible audio system or other equipment is connected between the TV and

recorder, “Sub” is displayed.

One Touch Recording

This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing REC on the remote control.

Prepare the connected AQUOS LINK-compatible recorder for recording. Check the following items.

•

Make sure that the antenna cable is connected.

•

Check that there is sufﬁ cient available space on the recording media (HDD, DVD, etc.).

•

On the TV, use “AQUOS LINK Setup” and “Selecting Recorder” to select the equipment for recording.

•

By default, the recorder connected to INPUT 5 is selected for recording.

Press REC to start recording.

•

When you are viewing a broadcast received with the AQUOS LINK-compatible recorder selected in "Selecting Recorder", recording to the AQUOS recorder of the broadcast being viewed starts.

•

When you are viewing a broadcast received with equipment other than the AQUOS LINK-compatible recorder selected in "Selecting Recorder" or other external input equipment, pressing REC on the remote control does not start recording.

Press REC STOP to stop recording.

Page 42

Using AQUOS LINK

One Touch Playback

AQUOS LINK allows you to operate the HDMIconnected equipment with one remote control.

Press d to start playing back a title.

The last played program is played back. You can use the

•

following buttons during broadcast viewing.

Buttons Description

SOURCE

POWER

)

You can use 7/8 only when the model BD-HP21U is

•

connected. The buttons 7/8 do not function with the following

•

BD players currently available.

- BD-HP20U, BD-HP50U

Turns the power of the HDMI connected devices on and off.

Hold down to go in reverse.

Starts playback.

Hold down to fast forward.

Playback stops.

Sets pauses and still pictures.

Pressing quickly once takes you to the start of the chapter currently playing. Each time you press it, you move back to the start of the previous chapter.

Pressing quickly once takes you to the start of the next chapter. Each time you press it, you move ahead to the start of the next chapter.

AQUOS LINK Menu

AQUOS LINK

Recorder EPG

Top menu/title list Media change By AQUOS AUDIO SP By AQUOS SP

Sound mode change Setup menu Model select

Timer Recording

You can call up the AQUOS LINK-compatible recorder’s EPG and preset timer recordings using the TV’s remote control.

Press OPTION to display the AQUOS LINK MENU

screen.

Press a/b to select “Recorder EPG”, and then

press ENTER.

The recorder’s EPG is displayed.

•

Select the program to record.

• You can use a/b/c/d, ENTER, RETURN, EXIT and the coloured buttons.

This function works only when an AQUOS LINK-compatible

• recorder is connected. Refer to the operation manual of the recorder for details.

•

Page 43

Using AQUOS LINK

Playback of Titles Using AQUOS LINK

This section explains how to play back a title in the AQUOS LINK-compatible equipment.

Power on the AQUOS LINK-compatible equipment,

and select appropriate external input.

Press OPTION to display the AQUOS LINK MENU

screen.

Press a/b to select “Top menu/title list”, and then

press ENTER.

The title list data from the connected

•

compatible equipment

Select the title with a/b/c/d, and then press d

to start playback.

This function works only when AQUOS LINK-compatible

• equipment is connected.

displays.

AQUOS LINK-

Selecting Media Type for AQUOS LINKCompatible Recorder

You can switch the media (HDD or DVD) for playback or recording on the AQUOS LINK-compatible recorder.

Press OPTION to display the AQUOS LINK MENU

screen.

Press a/b to select “Media change”, and then

press ENTER. Select the desired media such as DVD or HDD.

The Media type toggles each time you press ENTER in

• “Media change”. Select the media to be operated by the player.

•

Listening with the AQUOS AUDIO Speaker System

You can select to listen to the TV sound only from the AQUOS LINK-compatible audio system and manually change its sound mode.

Press OPTION to display the AQUOS LINK MENU

screen.

Press a/b to select “By AQUOS AUDIO SP”, and

then press ENTER.

The sound from the TV speaker is muted and only the

• sound from the AQUOS LINK-compatible audio system is audible. You can use VOLk/l and MUTE.

•

Select “By AQUOS SP”, and then press ENTER to listen to the TV sound.

Manually Changing AQUOS AUDIO Speaker System’s Sound Mode

Press OPTION to display the AQUOS LINK MENU

screen.

Press a/b to select “Sound mode change”, and

then press ENTER.

The sound mode changes each time you press ENTER.

• Refer to the operation manual of the AQUOS LINK-

• compatible audio system for details.

Displaying the Setup Menu of AQUOS LINK-Compatible Equipment

You can call up a setup menu from the connected AQUOS LINK-compatible equipment.

Press OPTION to display the AQUOS LINK MENU

screen.

Press a/b to select "Setup menu", and then press

ENTER.

The setup menu of the AQUOS LINK-compatible

• equipment is displayed.

Depending on the status of the equipment (recording or in

• standby mode, etc), the setup menu will not be displayed. This function works only when the model BD-HP21U or

• BD-HP50U is connected. The setup menu will not be displayed with the player

• BD-HP20U currently available.

HDMI Device Selection

If multiple HDMI devices are connected in a daisy chain, you can specify which device to control here.

Press OPTION to display the AQUOS LINK MENU

screen.

Press a/b to select “Model select”, and then

press ENTER. The HDMI device toggles each time you press ENTER.

Page 44

Using a PC

Connecting a PC

When using HDMI cable:

HDMI OUT

AUDIO

When using analog RGB cable:

INPUT 5, 6, 7 or 8

HDMI-certiﬁ ed cable

INPUT 6

HDMI-DVI conversion cableI

Ø 3.5 mm stereo minijack cable

INPUT 4

Ø 3.5 mm stereo minijack cable

AUDIO

When using RS-232C serial control cable:

RS-232C serial control cable (cross type)

RGB cable

RS-232C

• When connecting a PC to the INPUT 4, set "PC Audio Select" to "Input 4 (PC)". (See page 44.)

• When connecting a PC to the INPUT 6, set "PC Audio Select" to "Input 6 (HDMI)". (See page 44.)

• The HDMI terminals only support digital signal.

• Refer to page 44 for a list of PC signals compatible with the TV.

Page 45

Using a PC

Displaying a PC image on the screen

VIEW MODE

You can select the screen size.

Press VIEW MODE.

The View Mode menu displays.

• The menu lists the View Mode options selectable for the type of video signal currently being received.

•

Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu.

You can sequentially select a View Mode that has its own aspect ratio.

•

Connect the PC before making adjustments. (See page 42.)

• Selectable screen size may vary with input signal type.

•

Example: Screen size images

Input signal Normal Zoom Stretch Dot by Dot

4:3

Input signal Stretch Dot by Dot

16:9 An image fully ﬁ lls the

Keeps the original aspect ratio in a full screen display.

screen.

For viewing widescreen programs. The top and bottom of the image is cropped.

Detects the resolution of the signal and displays an image with the same number of pixels on the screen.

An image fully ﬁ lls the screen.

Detects the resolution of the signal and displays an image with the same number of pixels on the screen.

Page 46

Using a PC

Press MENU to display the MENU screen, and then

press c/d to select the Setup or Option menu.

•

For adjusting "Auto Sync." or "Fine Sync.", select the Setup menu.

•

For setting "PC Audio Select", select the Option menu.

Press a/b to select a speciﬁ c adjustment item,

and then press ENTER to set each item.

Press a/b (or c/d) to select or adjust the desired

setting, and then press ENTER.

Adjusting the PC Image

Auto Sync. (for Analog PC Input Mode Only)

For automatically adjusting the PC image.

Yes: Auto Sync. starts and "Now adjusting the image."

displays.

No: This function does not work.

•

When Auto Sync. is successful, "Completed" displays. If not, Auto Sync. failed.

•

Auto Sync. may fail even if "Completed" displays.

•

Auto Sync. may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto Sync.

•

Be sure to connect the PC to the TV and switch it on before starting Auto Sync.

Fine Sync.

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image.

H-Pos.: Centers the image by moving it to the left or

right.

V-Pos.: Centers the image by moving it up or down. Clock: Adjust when the image ﬂ ickers with vertical

stripes.

Phase: Adjust when characters have low contrast or

when the image ﬂ ickers.

Setting Audio Input

PC Audio Select

Determines whether the AUDIO terminal is used for INPUT 4 (PC-IN) or INPUT 6 (HDMI).

Input 4 (PC): Select this item when the audio signal is

input via the INPUT 4 (PC-IN) terminal using an analog RGB cable.

Input 6 (HDMI): Select this item when the audio signal is

input via the INPUT 6 (HDMI) terminal using an HDMIDVI conversion cable.

When "PC Audio Select" is set to "Input 6 (HDMI)", sound

• will not be produced if you use only an HDMI-certiﬁ ed cable to connect HDMI-compatible equipment. To produce sound, you should make an analog audio connection. If you want to connect HDMI-compatible equipment using

• only an HDMI-certiﬁ ed cable, set "PC Audio Select" to "Input 4 (PC)".

PC Compatibility Chart

It is necessary to set the PC correctly to display XGA and WXGA signal.

Resolution

720 x 400

VGA

XGA 1024 x 768

WXGA 1360 x 768

VGA and XGA are registered trademarks of International Business Machines Corp.

640 x 480

800 x 600SVGA

Horizontal Frequency

31.5 kHz

37.9 kHz

37.5 kHz

35.1 kHz

37.9 kHz

48.1 kHz

46.9 kHz

48.4 kHz

56.5 kHz

60.0 kHz

47.7 kHz

64.0 kHzSXGA 1280 x 1024

65.3 kHzSXGA+ 1400 x 1050 60 Hz O

75.0 kHzUXGA 1600 x 1200

Vertical

Frequency

70 Hz 60 Hz

72 Hz 75 Hz 56 Hz 60 Hz 72 Hz 75 Hz 60 Hz 70 Hz 75 Hz 60 Hz 60 Hz O

60 Hz O

VESA

Standard

O O O O O O O O O O O

•

For resetting all Fine Sync. adjustment items to the factory preset values, press a/b to select "Reset", and then press ENTER.

•

It is not necessary to adjust the "Clock" or "Phase" when a digital signal is being input, so it cannot be selected.

•

The default cursor position may not be in the center, because the screen position variable ranges may be asymmetrical.

•

The screen position variable ranges depend on the View Mode or the signal type. The ranges can be seen on the position-setting screen.

Page 47

Using a PC

RS-232C Port Speciﬁ cations

PC control of the TV

■

• Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections.

This operation system should be used by a person who is

•

accustomed to using computers.

Communication conditions

■

Set the RS-232C communication settings on the PC to match the TV's communication conditions. The TV's communication settings are as follows:

Baud rate: 9,600 bps Data length: 8 bits Parity bit: None Stop bit: 1 bit Flow control: None

Communication procedure

■

Send the control commands from the PC via the RS232C connector. The TV operates according to the received command and sends a response message to the PC. Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command.

Command table

■

• Commands not indicated here are not guaranteed to operate.

CONTROL ITEM COMMAND

POWER ON COMMAND SETTING

POWER SETTING

INPUT SELECTION A TOGGLE

INPUT SELECTION B

AV MODE SELECTION

VOLUME POSITION

VIEW MODE

MUTE SURROUND AUDIO SELECTION SLEEP TIMER

CHANNEL

TV INPUT1-8 INPUT 1 INPUT 2

H-POSITIONH-POSITION V-POSITION CLOCK PHASE

DIRECT CHANNEL (ANALOG)

DIRECT CHANNEL (DIGITAL)

CH UP CH DOWN

RSPW

ITGD ITVD IAVD INP1

AVMD

VOLM HPOS VPOS CLCK PHSE

WIDE

MU T E * _ _ _ ACSU ACHAx _ _ _ OFTM

DCCH

DA2 P * * * * DC2 U * * * _

DC2 L * * * _

DC1 0 * * * * DC1 1 * * * * CHUP CHDW CLCP

PARAMETER

* *___

_Off

(Toggle)

_ _

Input terminal number (1–8)

0: Auto, 1: VIDEO, 2: COMPONENT

0: Auto, 2: COMPONENT, 3: S-TERMINALINP2 0: (Toggle), 1: STANDARD, 2: MOVIE, 3: GAME, 4: USER,

5: DYNAMIC (Fixed), 6: DYNAMIC, 7: PC, 100: INTELLIGENT Volume (0–60)

_ _ _

Only PC mode. (0–180)

Only PC mode. (0–40)

0: (Toggle) [AV], 1: Side Bar [AV], 2: S.Stretch [AV]

3: Zoom [AV], 4: Stretch [AV], 5: Normal [PC] 6: Zoom [PC], 7: Stretch [PC], 8: Dot by Dot [PC] [AV], 9: Full Screen [AV]

0: (Toggle), 1: On, 2: Off

0: (Toggle), 1: On, 2: Off (Toggle) 0: Off, 1: OFF TIMER – 30 MIN., 2: OFF TIMER – 60 MIN.,

3: OFF TIMER – 90 MIN., 4: OFF TIMER – 120 MIN.

The channel number of TV (1–135)

(1-999)

(0-999)

(0-9999) (0-6383) The channel number of TV +1

The channel number of TV

_ _

(Toggle)

–

■

Eight ASCII codes e CR

Command 4-digits

Command 4-digits: Command. The text of four characters. Parameter 4-digits: Parameter 0–9, x, blank, ?

■

Input the parameter values, aligning left, and ﬁ ll with blank(s) for the remainder. (Be sure that 4 values are input for the parameter.) When the input parameter is not within an adjustable range, “ERR” returns. (Refer to “Response code format”.) Any numerical value can replace the “x” on the table.

0009

a 30

■

Normal response

Command format

C1 C2 C3 C4 P1 P2 P3 P4

Parameter 4-digits

Parameter

When “?” is input for some commands, the present setting value responds.

Response code format

Problem response (communication

Return code (0DH)

CONTROL CONTENTS

The Power On command rejected. The Power On command accepted.1___On It shifts to standby.P O W R 0 _ _ _ Power Off Power On1 _ _ _ Power On It input-switches by the toggle. (It is the same as an input change key) It input-switches to TV. (A channel remains as it is. (Last memory)) It input-switches to INPUT1~INPUT8. An input change is also included.

Although it can choose now, it is toggle operation in inside.

The screen position variable ranges depend on the View Mode or the signal type. The ranges can be seen on the position-setting screen.

0: Although it can choose now, it is toggle operation in inside. 1: Only available when 4:3 signal is being input. 5, 6: Only available when 4:3 signal is being input. 8: [PC] Available except when UXGA is being input. [AV] Only available when 1080i/p is being input. 9: Only available when 720p is being input.

An input change is included if it is not TV display. In Air, 2–69ch is effective. In Cable, 1–135ch is effective.

DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit)(0100-9999) DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit) Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel) DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit) Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel) DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000) DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000) If it is not TV display, it will input-switch to TV. (same function as CHU) If it is not TV display, it will input-switch to TV. (same function as CHV) Toggle operation of a closed caption.

error or incorrect command)

ERR

Return code

????

Return code (0DH)

If an underbar (_) appears in the parameter column, enter a space.

•

If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.

•

Any numerical value can replace the “x” on the table.

•

Page 48

Using the Internet

•

By connecting your TV to a broadband system, you can access the Internet from the TV.

•

Display the “Sidebar Widget” on the screen to check out the latest Internet information and access a range of useful information for AQUOS users from the original home page*.

About the original home page

The original home page is a website set up speciﬁ cally for AQUOS owners.

• The website is worth visiting as it provides a range of useful information, including tips on using your AQUOS

• and a frequently asked questions section.

Internet Setup



Connecting to the Internet

•

To connect your TV to the Internet, you must have a broadband Internet connection.

•

Use an ETHERNET cable (commercially available) to connect the ETHERNET terminal on the TV to your broadband router (commercially available).

•

If you do not have a broadband Internet connection, consult the store where you purchased your TV or ask your Internet service provider or telephone company.

Internet

ETHERNET cable (commercially available)



Checking your Internet connection

•

Press NET twice or three times to switch to the TV+Web or Web screen. When the original home page appears, now you are connected to the Internet.

•

If you have failed to connect to the Internet in the above operation, then an error message will appear. In this case, press EXIT to return to the normal TV screen and check the relevant settings (see page 47).

•

If you still cannot connect to the Internet, please consult your Internet service provider or telephone company.



Information on the PLC adapter

The SHARP PLC adapter kit (sold separately) lets you use the existing electrical wiring in your house to create a

home network.

Simply plug the adapters into electrical outlets at the desired locations, and then connect your computer and other devices to the adapters with LAN cables (two

Internet

LAN cables are provided).

If you have Broadband Internet service, connect your router to one of the adapters to allow all your network devices to access the Internet. Data can be exchanged at speeds of up to 85 Mbps on your network.

Up to four devices can be connected to the HN-VA400U adapter.

Model number Number of ports

HN-VA401SU 4 +1

HN-VA400U 4 HN-VA100U 1

*1: PLC does not have router function. To connect

to the Internet via network, Broadband Internet connection and related devices such as router etc is required.

*2: The actual communication speed may be affected

by power line conditions, other electrical appliances and network conditions.

Page 49

Using the Internet



If you cannot connect to the Internet

Perform the procedures below to check your TV's network settings.

Ethernet Setup

Press EXIT to display the normal TV screen.

Press MENU to display the MENU screen, and then

press c/d to select “Digital Setup”.

Displaying the Sidebar Widget

Perform the steps below to display the Sidebar Widget on the screen and view the latest Internet information.

Press a/b to select “Communication Setup”, and

then press ENTER.

Press a/b to select “Ethernet Setup”, and then

press ENTER.

Check that numbers are displayed for each setting.

• If there are any settings without numbers, specify the

• numbers by following the on-screen instructions. For information on how to enter text, see page 48.

•

Press MENU to exit.

Setting the Zip Code

Repeat steps 1 to 3 in Ethernet Setup.

Press a/b to select “Zip Code”, and then press

ENTER. After “Change” is highlighted, press ENTER again.

Press c/d to select “US/Mexico” or “Canada”,

and then press ENTER. Enter your zip code.

•

The U.S. and Mexico use 5-digit zip codes. Canada uses 6-digit codes.

•

For the U.S and Mexico, use 0-9 on the remote control unit to enter your zip code. For Canada, use the software keyboard.

After “Complete” is highlighted, press ENTER.

Press MENU to exit.

Press NET repeatedly to display the Sidebar

Widget.

•

Each time you press NET, the screen image toggles as shown below:

Sidebar Widget TV+Web Web T

When you are not connected to the Internet, a network

• function explanation screen is displayed. The services displayed vary depending on circumstances.

Press a/b to select a title, and then press

ENTER.

The web page for the selected title is displayed.

• The service details vary depending on circumstances.

•

Press EXIT to return to the normal TV screen.

ENTER EXIT

:Detail :Exit

Interactive Service

If you do not want other people to connect to the Internet in your absence, you can make settings to keep the TV away from the Internet.

Press MENU to display the MENU screen, and then

press c/d to select “Digital Setup”.

Press a/b to select “Interactive Service”, and then

press ENTER.

•

Input the 4-digit secret number by using 0–9.

Press c/d to select “No”, and then press ENTER.

•

If you want to allow Internet connection, select “Yes”, and then press

Press MENU to exit.

ENTER

If you start up the Sidebar Widget while a Closed Caption

• is displayed, the Closed Caption is automatically hidden. Web page appearances may differ depending on the type

• of screen (TV+Web or Web). When a still image is displayed, the Sidebar Widget does

• not appear even if you press NET.

Page 50

Using the Internet

Entering Text (Software Keyboard)

When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard.

You can enter up to 128 characters for text.•

The text you enter is displayed as you type it in. To move the cursor (the current input position), use “

Press c/d to select the type of characters entered: alphabet, number or sign. (The selectable types depend on the input source.)

” or “ ” on the software keyboard.

Caps Off/Caps On/Caps Lock If “alphabet” is selected in “Character Set”, this switches characters between uppercase and lowercase. Each time you press ENTER, the character type switches as shown below: Caps Off: all the characters are lowercased Caps On: only the ﬁ rst character is uppercased Caps Lock: all the characters are uppercased

Done

Applies the entered information and closes the software keyboard.

Quit

Closes the software keyboard without applying the entered information.

You can also close the software keyboard by pressing

•

EXIT on the remote control unit.

Displays the icon “ ”, indicating that a new line has been inserted.

Clear

Erases the character string.

When the cursor is somewhere in a line: the character

• string to the right of the cursor will be erased. When the cursor is at the right end of a line: the entire line

• will be erased.

Enters a space.

While you are entering text, likely input conversion candidates are displayed based on what you typed in.

You can also enter text by pressing A, B or C on the remote

• control unit.

Buttons Description

ENTER Performs the processing for the button currently in the focus.

EXIT

RETURN When the cursor is at the end of a sentence, this acts as a backspace. 0-9 Directly enters the single-byte number for that button. A (red) Directly enters prediction candidate 1. B (green) Directly enters prediction candidate 2. C (blue) Directly enters prediction candidate 3.

D (yellow) Enters a space.

Moves the focus up. When the focus is at the top edge, this moves the focus to the opposite edge (bottom edge). Moves the focus down. When the focus is at the bottom edge, this moves the focus to the opposite edge (top edge). Moves the focus left. When the focus is at the left edge, this moves the focus to the opposite edge (right edge). When the focus is on “Character Set”, this selects the character type (moving backwards). When the focus is in an input box, this moves the cursor in the input box to the left. Moves the focus right. When the focus is at the right edge, this moves the focus to the opposite edge (left edge). When the focus is on “Character Set”, this selects the character type (moving forwards). When the focus is in an input box, this moves the cursor in the input box to the right.

Closes the software keyboard without applying the original input elements for the entered text. Erases the text in the input box where the cursor is currently located.

Delete

If the cursor is at the right end of a line, this erases text one character at a time.

You can also delete text by pressing RETURN on the

• remote control unit.

Page 51

Using the Internet

Photo Player

:Tool

:Scroll

AQUOS Console

Add Widgets

Legal

AQUOS Center

AQUOS

Network

What’s New

Feaeat

ured Content

Sports

Entertainment

AQUOS G

allery

Monday

Today

Wednesday

Tuesday

AQUARIUS

GEMINI

PISCES

ARIES

Using the Browser

ENTER, a/b/c/

• Press

a/b/c/d

and then press ENTER.

EXIT

• Press the button to return to the TV screen.

RETURN

• Press the button to return to the previous page.

Example : The image shown below, which is only for

explanation, is subject to change.

to select a link that you want to jump,

About links

•

Web pages on the Internet often include “links” that allow you to jump to other web pages (or sites).

•

“Links” can take various forms, including words or images, but they always work in the same way letting you jump to the link destination when you select them.

•

Selected items (such as links of text input ﬁ elds) are enclosed in a yellow frame.

•

You can jump from a “link” to the corresponding link destination.

CAUTION

If the power is cut due to a power failure or the TV being

• unplugged while you are using the Internet, information such as bookmarks or cookies may not be saved correctly.

AQUOS

Network

AQUOS

ured C

Photo Player

Sports

Today

CONSOLE

GEMINI

Add Widgets

Click this but t on to go to

AQUOS

Pages with security protection are

Tab

If content on a page is continued on another page, directions to that page are shown clearly. You can use a/b/c/d to go to the continuation of a

clearly shown as such.

page.

Where there is link text or a link image in the

• direction pressed, the text or image is selected ﬁ rst. If this happens, press the same direction button several times.

Monday

AQUARIUS

AQUOS Network.

Entertainment

allery

Tuesday

ARIES

:Tool

What’s New

Wednesday

PISCES

Page 1 o f 3

Legal

:Scroll

When a security notiﬁ cation window is displayed:

•

Press

•

ENTER

This window appears when you visit a web page that has

to close the window.

security protection, or when you move from a protected page to an unprotected page.

•

In “Security Settings” you can set whether or not this window is displayed. (See page 52.)

When a cookie conﬁ rmation window appears: Choose whether or not to accept the cookie (see page 52), and then press

•

In “Cookies” settings you can set whether or not this

ENTER

window is displayed. You can also opt to delete all the cookies at once. (See page 52.)

To users who access the Internet from a PC

•

When you access the Internet from this TV, the procedures may not be the same as regular browser-based access on a PC.

•

You cannot download ﬁ les.

•

You cannot view a history of the pages you have visited.

•

You cannot change the startup page displayed when you press NET.

•

Pop-up windows appear in separate tabs.

•

On some pages, video and audio cannot be played, and text or images may not be displayed correctly.

When “z” is displayed in a page:

The page failed to load successfully, or it contains images

• with formats that cannot be displayed on the TV. Try

reloading the page by selecting “ ” (see page 50) in the toolbar.

Page 52

Using the Internet

Using the Toolbar

You can use the toolbar to control the browser and to specify settings.

Using Tabs

You can use tabs to view up to 3 web pages at the same time. Each page appears in a separate tab, and you can switch between the tabs.

Press B on the remote control unit to display the

Tab menu.

You can also display the Tab menu by clicking “ ” in

• the toolbar.

Selected item Description

Select This Displays the web page in the

Close This Tab Closes the selected tab.

Close Other Tabs Closes the other (unselected) tabs. Create New Tab Creates a new tab.

Press c/d to select a tab.

Press a/b to select the item you want to use, and

then press ENTER.

selected tab.

You can also press C on the

• remote control unit to close a tab.

You can also press A on the

• remote control unit to create a tab.

Press D on the remote control unit to display the

toolbar.

Press c/d to select a function, and then press

ENTER.

Selected item Description

Displays the linked page in a new tab.

Displays the Tab menu.

Returns to the previous page.

Goes back to the original page when you have viewed the previous page.

Refreshes the page. Interrupts a page while it is loading.

Displays the original home page.

Select this to open a bookmark.

Adds the current page to your bookmarks.

Displays the Browser menu.

Page 53

Using the Internet

Saving the URL of the Current Page

Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks.

Display the page that you want to bookmark.

Press D on the remote control unit to display the

toolbar. Press c/d to select

press ENTER. Select “Yes”, and then press ENTER.

The page is added to your bookmarks.

•

“ ”

in the toolbar, and then

Opening a Bookmarked Page

Press D on the remote control unit to display the

toolbar.

Press c/d to select

press ENTER.

•

Your bookmarks list is displayed.

Press a/b/c/d to select the page you want to

access, and then press ENTER.

•

The selected page is displayed.

•

If you have bookmarked 11 or more web pages, press

to scroll through your bookmarks list.

c/d

“ ”

in the toolbar, and then

Editing Bookmarks

You can rearrange or delete the bookmarks.

Switching between the URL and title name

■

Press D on the remote control unit to display the

toolbar.

”

“

Press c/d to select

press ENTER.

Your bookmarks list is displayed.

•

Press a/b to select the title you want to edit from

the bookmarks list, and then press A on the remote control unit.

The Bookmarks menu appears.

•

Select “Display by Address” or “Display by Title” in

the Bookmarks menu, and then press ENTER.

Rearranging displayed items

■

Press D on the remote control unit to display the

toolbar.

Press c/d to select

press ENTER.

Your bookmarks list is displayed.

•

Press a/b to select the title you want to display

in a different position from the bookmarks list, and then press A on the remote control unit.

The Bookmarks menu appears.

•

Press a/b to select “Move Up” or “Move Down”,

and then press ENTER.

Deleting bookmarks

■

Press D on the remote control unit to display the

toolbar.

Press c/d to select

press ENTER.

Your bookmarks list is displayed.

•

Press a/b to select the title you want to delete,

and then press A on the remote control unit.

The Bookmarks menu appears.

•

Press a/b to select “Delete”, and then press

ENTER.

To delete all the bookmarks, select “Delete All”.

•

Press c/d to select “Yes”, and then press

ENTER.

in the toolbar, and then

”

“

in the toolbar, and then

”

“

in the toolbar, and then

When opening a bookmark in a new tab:

Press A instead of ENTER.

•

The Bookmarks menu appears.

Select “Open in New Tab”, and then press

ENTER.

Page 54

Using the Internet

Browser Settings

You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu.

Press D to display the toolbar.

”

“

Press c/d to select

press ENTER.

Press c/d to select the settings menu you want to

access.

Press a/b to select and conﬁ rm the item you want

to set.

Press a/b/c/d to specify the required setting,

and then press ENTER. Press D to exit.

in the toolbar, and then

Security Settings

Security:

Save Setting: If you select this option, a message is

displayed when you move from a protected page to an unprotected page. To change this setting, remove the tick, select “Save Setting” and then press ENTER.

Root Certiﬁ cates/CA Certiﬁ cates: Displays the list of

certiﬁ cates. To disable a certiﬁ cate, select the certiﬁ cate to be disabled and press A to display the sub-menu. Select “Disable”, and then press ENTER.

•

Disabled certiﬁ cates are shown unticked in the certiﬁ cate list screen.

Cookies:

Accept all: Select this option to accept all cookies. Reject all: Select this option when you do not want to

accept cookies.

Prompt before accepting: When you open a page

that uses cookies, this option displays a conﬁ rmation message.

Delete All Cookies: Deletes all your cookies.

Server Certiﬁ cates: Displays certiﬁ cates for the connected

server.

Browser Information: Displays browser information.

View Settings

Zoom In/Out:

Zoom in: Displays content enlarged to 200%. Normal: Displays content at 100%. Zoom out: Displays content reduced to 75%.

Encoding: Selects the desired encoding from the list below:

Western (ISO-8859-1)/Unicode (UTF-8)

Page Information: Displays information about the currently

displayed page.

Reset:

Yes: Resets the browser settings. No: Does not reset the browser settings.

“Reset” does not reset the certiﬁ cation enable/disable and

• Encoding settings.

•

This product contains NetFront Browser of ACCESS CO., LTD.

•

ACCESS, the ACCESS logo and NetFront are registered trademarks or trademarks of ACCESS CO., LTD. in the United States, Japan and/or other countries.

reserved.

•

This software is based in part on the work of the Independent JPEG Group.

Page 55

Appendix

Removing the Stand

•

Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.

CAUTION

• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

Before attaching/detaching the stand

• Before performing work, make sure to turn off the TV.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

1 2

Unfasten the four screws used to secure the stand in place.

• To attach the stand, perform the above steps in reverse order.

Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)

Setting the TV on the Wall

CAUTION

LC-40LE700UN

• This TV should be mounted on the wall with both the AN-37AG2 (SHARP) wall mount bracket and the AN-37P30

(SHARP) attachment of the wall mount bracket. The TV cannot be mounted when with only the AN-37AG2 wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

LC-46LE700UN/LC-52LE700UN

• This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other

wall mount brackets may result in an unstable installation and may cause serious injuries.

• Installing the TV requires special skill that should only be performed by qualiﬁ ed service personnel. Customers

should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

You can ask a qualiﬁ ed service professional about using an optional AN-37AG2 or AN-52AG4 bracket to mount the

• TV on the wall.

• Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-37AG2 or AN-52AG4 (See the bracket instructions for details.)

Vertical mounting

wall mount bracket.

Angular mounting

About setting the TV angle

AN-37AG2 + AN-37P30

0/5/10/15/20°

LC-40LE700UN

•

The center of the display: 1 9/64 inches (29.05 mm) under the “B” position.

AN-52AG4 LC-46LE700UN

• The center of the display:

/16 inch (1.2 mm) under the “b” position.

LC-52LE700UN

• The center of the display:

/64 inch (1.75 mm) under the “b” position.

•

Refer to the operation manual of AN-37AG2/AN-37P30 or AN-52AG4 for details.

• Detach the cable clamp on the rear of the TV when using the optional mount bracket.

• Due to the terminal conﬁ guration on this TV, when you wall-mount this model, make sure there is enough space between the

wall and the TV for the cables.

• To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws

supplied with the wall mount bracket to secure the bracket to the rear of the TV.

Page 56

Appendix

Troubleshooting

Problem Possible Solution

No power• Check if you pressed TV POWER on the remote control unit. Page 14

Unit cannot be operated.• External inﬂ uences such as lightning, static electricity, may cause improper

Remote control unit does not

• operate.

Picture is cut off/with sidebar

• screen.

Strange color, light color, or color

• misalignment

Power is suddenly turned off.• Is the sleep timer set?

No picture• Is connection to other components correct? Pages 12, 13, 38 and 42

• If the indicator on the TV does not light up, press POWER on the TV. Is the AC cord disconnected? Page 7

• Has the power been turned on? Page 14

•

• operation. In this case, operate the unit after ﬁ rst turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes.

Is the FUNCTION set correctly? Set it to the TV setting position.

• Are batteries inserted with polarity (e, f) aligned? Page 8

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or ﬂ uorescent lighting?

• Is a ﬂ uorescent light illuminated near the remote control sensor?

•

Page 15

Page 25

Is the image position correct?

• Are screen mode adjustments such as picture size made correctly? Pages 18 and 43

•

Adjust the picture tone. Pages 21 and 22

• Is the room too bright? The picture may look dark in a room that is too bright.

•

• Check the power control settings. Page 23

• The unit's internal temperature has increased. Remove any objects blocking vent or

• clean.

• Is correct input signal source selected after connection? Page 28

• Is the correct input selected? Page 28

• Is picture adjustment correct? Pages 21 and 22

• Is “On” selected in “Audio Only”? Page 28

• Is a non-compatible signal being input? Page 44

•

No sound• Is the volume too low? Page 15

The TV sometimes makes a

• This is not a malfunction. This happens when the cabinet slightly expands and cracking sound.

• The original home page cannot

be displayed.

• Some Internet functions used on

a PC are not available from the TV.

• Is “Variable” selected in “Output Select”? Page 28

• Have you pressed MUTE on the remote control unit? Page 15

•

• contracts according to change in temperature. This does not affect the TV's performance.

• Is the ETHERNET cable connected correctly?

• Check the settings of "Communication Setup" and "Interactive Service".

• The TV has only limited functions compared with regular PC browsers. Page 48

Page 46

Troubleshooting-Digital Broadcasting

The error message about reception of broadcast

The example of an error message

displayed on a screen

Failed to receive broadcast.• E202 Check the antenna cable. Check that the antenna is correctly

No broadcast now.• E203 Check the broadcast time in the program guide.•

Error code Possible Solution

• setup.

Page 47

Page 57

Appendix

Speciﬁ cations

Item Model: LC-40LE700UN Model: LC-46LE700UN Model: LC-52LE77UN

LCD panel

Resolution 2,073,600 pixels (1,920 g 1,080)

TV-standard (CCIR) American TV Standard ATSC/NTSC System

VHF/UHF VHF 2-13ch, UHF 14-69ch

CATV 1-135ch (non-scrambled channel only)

TV Function

Receiving Channel

Digital Terrestrial Broadcast (8VSB)

Digital cable*1 (64/256 QAM)

Audio multiplex BTSC System

Backlight 100,000 hours (at Backlight Standard position)

Audio out 10W g 2

INPUT 1 AV in, COMPONENT in

INPUT 2 COMPONENT in, S-VIDEO in

INPUT 4 ANALOG RGB (PC) in (15-pin mini D-sub female connector), Audio in (Ø 3.5 mm jack)

INPUT 6 HDMI in with HDCP, Audio in (Ø 3.5 mm jack)

INPUT 7 HDMI in with HDCP

INPUT 8 HDMI in with HDCP

Rear

ANT/CABLE 75 q Unbalance, F Type g 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)

Terminals

AUDIO Audio in (Ø 3.5 mm jack)

DIGITAL AUDIO OUTPUT

ETHERNET Network connector

OUTPUT Audio out

RS-232C 9-pin D-sub male connector

INPUT 3 AV in

Side

INPUT 5 HDMI in with HDCP

USB Photo/Music mode, Software update

OSD language English/French/Spanish

Power Requirement AC 120 V, 60 Hz

Power Consumption

Weight

Dimension

(W g H g D) (inches)

TV + stand 30.9 lbs./14.0 kg 47.4 lbs./21.5 kg 57.3 lbs./26.0 kg

TV only 26.5 lbs./12.0 kg 40.8 lbs./18.5 kg 50.7 lbs./23.0 kg

TV + stand

TV only

Operating temperature

Emergency alert messages via Cable are unreceivable.

The dimensional drawings are shown on the inside back cover.

• As part of policy of continuous improvement, SHARP reserves the right to make design and speciﬁ cation changes for product improvement without prior notice. The performance speciﬁ cation ﬁ gures indicated are nominal values of production units. There may be some deviations from these values in individual units.

Optional Accessory

The listed optional accessory is available for the Liquid Crystal Television. Please purchase it at your nearest shop.

• Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.

40o Class (40o Diagonal) Advanced Super View & BLACK TFT LCD

46o Class (45 63/

Diagonal)

Advanced Super View & BLACK TFT LCD

52o Class (52 1/ Advanced Super View & BLACK TFT LCD

Diagonal)

2-69ch

1-135ch (non-scrambled channel only)

Optical Digital audio output g 1 (PCM/Dolby Digital)

160 W (0.5 W Standby with AC 120 V)

200 W (0.5 W Standby with AC 120 V)

250 W (0.5 W Standby with AC 120 V)

37 61/64 g 26 3/16 g 12 3/843 9/32 g 29 11/64 g 13 61/6448 3/4 g 32 13/64 g 13 61/

37 61/64 g24 3/32 g 3 41/

32°F to e104°F (0°C to e40°C)

43 9/32 g 27 3/32 g 3 45/

48 3/4 g 30 1/8 g 3 43/

Part name Model number

Wall mount bracket

AN-37AG2 (for LC-40LE700UN)

Attachment AN-37P30 (for LC-40LE700UN) Wall mount

bracket

AN-52AG4 (for LC-46LE700UN/LC-52LE700UN)

Page 58

Appendix

Information on the Software License for This Product

Software composition

■

The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.

Software developed by SHARP and open source software

■

The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties. These include software components covered by a GNU General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement.

Obtaining source code

■

Some of the open source software licensors require the distributor to provide the source code with the executable software components. GPL and LGPL include similar requirements. For information on obtaining the source code for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the following website:

http://www.sharpusa.com/gpl

We are unable to answer any questions about the source code for the open source software. The source code for the software components whose copyrights are held by SHARP is not distributed.

Acknowledgements

■

The following open source software components are included in this product:

• linux kernel/busybox/uClibc/zlib/libpng/libjpeg/libiconv/DirectFB/OpenSSL/XMLRPC-EPI

Software Copyrights

■

XMLRPC-EPI

libjpeg

OpenSSL

SSLeay

Cautions regarding use in high and low temperature environments

When the unit is used in a low temperature space (e.g. room, ofﬁ ce), the picture may leave trails or appear slightly delayed.

• This is not a malfunction, and the unit will recover when the temperature returns to normal. Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

• heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. Storage temperature: f4°F to e140°F (f20°C to e60°C)

CLEARING THE SECRET NUMBER

If you forget the secret number, clear the secret number using the following procedure.

Select an item from the list below to display the secret number input screen. (For operating the on-screen

display menu, see page 19.)

• “EZ Setup”, “CH Setup”, “Parental CTRL” or “Reset” on the Setup menu.

• “Color System” on the Option menu.

• “Software Update” on the Digital Setup menu.

Press and hold both CHU and VOLk on the TV simultaneously until the message appears on the screen.

The secret number is .

• As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.

Page 59

Calling for Service

For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.

LIMITED WARRANTY

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the ﬁrst consumer purchaser that this Sharp brand Liquid Crystal Display product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product or if the serial number or model number afﬁxed to the Product has been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may vary. Please contact 1-888-GO-SHARP for further information.

In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of purchase to the servicer, which proof must include the date of purchase.

To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or implied. Speciﬁcally ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulﬁllment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable care, alteration, modiﬁcation, tampering, misuse, improper operation or maintenance or any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.

Model Speciﬁc Section

Your Product Model Number & Description:

Warranty Period for this Product: One (1) year parts and labor from the date of purchase.

Additional Exclusions from Warranty Coverage (if any):

LC-40LE700UN/LC-46LE700UN/LC-52LE700UN LCD Color Television (Be sure to have this information available when you need service for your Product.)

In order for the Product to be serviced, the Product must be readily available to the servicer, free and clear of any complex or non-standard installation, mounting or other encumbrance which would unreasonably interfere with servicing the Product. The Servicer will remount the Product after service, provided that such remounting is not into a complex or non-standard installation. Any additional labor and materials required to remove and/or reinstall a Product above and beyond the foregoing are not covered by this warranty, may result in additional charges and are the responsibility of the consumer. Image Retention resulting from a ﬁxed image being displayed for long periods of time is not covered by this Limited Warranty (see Operation Manual on how to prevent this).

Where to Obtain Service: From a Sharp Authorized Servicer located in the United States. To ﬁnd the

What to do to Obtain Service: Contact your Sharp Authorized Servicer to obtain in home service for this

TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP

location of the nearest Sharp Authorized Servicer, please call Sharp toll free at 1-800-BE-SHARP.

product. The Servicer will come to your location and if necessary remove the unit for repair at the Servicer’s facility and return the set to you once completed. Be sure to have Proof of Purchase available.

OR VISIT www.sharpusa.com

Page 60

Dimensional Drawings

LC-40LE700UN

(665)

(53)

(300)

(612)

(170)

/64 (964)

(887.8)

(500.35)

11 13/

(300)

(378)

(99)

Unit: inch (mm)

18 1/2 (470)

(92.5)

LC-46LE700UN

(741)

(688)

(53)

(175)

43 9/32 (1099)

40 19/64 (1023.4)

15 3/4 (400)

(575.6)

(416)

(116)

12 3/

(314)

(92.5)

63/

(177.1)

3 11/

(84.6)

AN-37AG2

AN-37P30

22 31/64 (571)

(94)

(400)

(354)

(94)

(67)

(161)

AN-52AG4

Page 61

Unit: inch (mm)

Dimensional Drawings

LC-52LE700UN

15 3/

(400)

(175)

48 3/

(1238)

(765)

(818)

(53)

45 9/

(1157.0)

(651.0)

(453)

22 31/

(571)

13 61/

(354)

6 5/

(160)

3 3/

(95)

3 43/

(93)

2 9/

(65)

4 17/

(115)

AN-52AG4

3 3/

(95)

Page 62

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

SHARP CORPORATION

LC-40LE700UN LC-46LE700UN LC-52LE700UN

OPERATION MANUAL MODE D'EMPLOI

MANUAL DE OPERACIÓN