Page 1
LC-32Z33H
LC-37Z33H
液晶彩色電視機
LCD COLOUR TELEVISION
使用說明書
OPERATION MANUAL
中文 ( 繁體 )
ENGLISH
Page 2
OPERATION MANUAL
ENGLISH
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
Contents
Introduction
Dear SHARP customer ................................................................................................ 1
Contents .......................................................................................................................1
Important Safety Precautions ..................................................................................... 3
Supplied accessories .................................................................................................. 4
Trademarks .................................................................................................................. 4
Preparation
Attaching the stand ..................................................................................................... 5
Part names ................................................................................................................... 6
Before turning on the power ....................................................................................... 9
Connecting external devices .................................................................................... 10
Inserting the batteries ............................................................................................... 12
Using the remote control unit ................................................................................... 12
Turning the TV on/off ................................................................................................. 13
About Menu operations ............................................................................................. 14
ENGLISH
TV (Front) .......................................................................................................... 6
TV (Rear) ........................................................................................................... 7
Remote control unit .......................................................................................... 8
Connecting a VCR, game console or camcorder .......................................... 10
Connecting a DVD player ............................................................................... 10
Connecting a Digital TV Decoder (Set Top Box) ............................................ 11
Connecting a PC ............................................................................................ 11
Cautions regarding the remote control unit ................................................... 12
Turning on the power ..................................................................................... 13
Turning off the power ..................................................................................... 13
What is Menu? ............................................................................................... 14
Basic Menu operations .................................................................................. 14
Using the control panel of the TV ................................................................... 14
About Guide Display ...................................................................................... 14
TV/AV input mode menu items ...................................................................... 15
PC input mode menu items ........................................................................... 16
Watching TV
Setting channels automatically ................................................................................ 17
Selecting programmes .............................................................................................. 18
Adjusting the volume ................................................................................................. 18
Menu language settings ............................................................................................ 18
Setting channels to your preference ........................................................................ 19
Auto search .................................................................................................... 19
Manual setting for each channel .................................................................... 19
Sorting programmes ...................................................................................... 21
Erasing programmes ...................................................................................... 22
Labelling programmes ................................................................................... 22
Useful viewing functions ........................................................................................... 23
Picture and still image ................................................................................... 23
Returning to the previously selected channel or external input mode ........... 24
Muting the audio temporarily ......................................................................... 24
Outputting only audio ..................................................................................... 24
Switching the analogue audio format ............................................................ 25
1
Page 3
Contents
Watching TV (Continued)
Reducing the start-up time ........................................................................... 25
Password setting for the child lock (for TV input mode) ................................ 26
Energy conservation settings ................................................................................... 27
Auto power-off at a designated time ............................................................. 27
Auto power-off after the end of broadcast .................................................... 27
Auto power-off when there are no operations performed ............................. 27
Power Management ....................................................................................... 28
Ecology ......................................................................................................... 28
Picture size settings .................................................................................................. 29
Selecting the Wide Screen Signalling (WSS) picture size automatically ........ 29
Selecting the Wide Screen Signalling (WSS) picture size manually ............... 29
Selecting the picture size manually (for TV/AV input mode) .......................... 30
Selecting a preset AV MODE .................................................................................... 31
Manual picture settings ............................................................................................. 32
Picture adjustment ......................................................................................... 32
Advanced picture settings ............................................................................. 33
Other picture settings................................................................................................ 34
DNR (Digital Noise Reduction) ....................................................................... 34
Adjusting the image position .......................................................................... 34
Game Play Time ............................................................................................ 34
Audio adjustment ....................................................................................................... 35
Output Volume Select ................................................................................... 35
Settings when using external devices
Settings when using HDMI output devices ............................................................. 36
Selecting the input source and signal type ............................................................ 37
Selecting input source ................................................................................... 37
Selecting input signal type ............................................................................ 37
Labelling input sources ............................................................................................. 38
Skipping HDMI/PC input .......................................................................................... 38
Colour system settings ............................................................................................. 38
Connecting a PC
Displaying a PC image on the screen ...................................................................... 39
Selecting the picture size ............................................................................... 40
Adjusting the PC image automatically ........................................................... 41
Adjusting the PC image manually .................................................................. 41
Input resolution settings ........................................................................................... 42
Selecting the input resolution......................................................................... 42
PC Control of the TV .................................................................................................. 43
PC compatibility chart (INPUT 5) .............................................................................. 44
RS-232C commands list ............................................................................................ 44
Appendix
Troubleshooting ......................................................................................................... 45
Reset ........................................................................................................................... 46
Specifi cations ............................................................................................................. 47
Optional accessory ................................................................................................... 47
Dimensional drawings ............................................................................................... 48
Mounting the TV on the wall .................................................................................... 49
Removing the stand ...................................................................................... 49
Handling and precautions with the wall-mounted TV ................................... 49
CLEARING THE PASSWORD .................................................................................... 50
2
Page 4
Important Safety Precautions
• Cleaning — Unplug the AC cord
from the AC outlet before cleaning
the product. Use a damp cloth to
clean the product. Do not use liquid
cleaners or aerosol cleaners.
• Water and moisture — Do not use
the product near water, such as
bathtub, washbasin, kitchen sink,
laundry tub, swimming pool and in a
wet basement.
• Do not place vases or any other
water-fi lled containers on this product.
The water may spill onto the product
causing fi re or electric shock.
• Stand — Do not place the product
on an unstable cart, stand, tripod
or table. Doing so can cause the
product to fall, resulting in serious
personal injuries as well as damage
to the product. Use only a cart,
stand, tripod, bracket or table
recommended by the manufacturer
or sold with the product. When
mounting the product on a wall, be
sure to follow the manufacturer’s
instructions. Use only the mounting
hardware recommended by the
manufacturer.
• The LCD panel used in this product
is made of glass. Therefore, it can
break when the product is struck
forcefully or with a sharp object. If
the LCD panel is broken, be careful
not to be injured by broken glass.
• Heat sources — Keep the product
away from heat sources such as
radiators, heaters, stoves and other
heat-generating products (including
amplifi ers)
• To prevent fi re, never place any type
of candle or naked fl ames on the
top or near the TV set.
• To prevent fi re or shock hazard, do
not place the AC power cord under
the TV set or other heavy items.
• Do not place heavy objects on this
product or stand on it. Doing so
could cause injury if the product
overturns. Take special care near
children and pets.
• When relocating the product
placed on a cart, it must be moved
with utmost care. Sudden stops,
excessive force and uneven fl oor
surface can cause the product to fall
from the cart.
• Ventilation — The vents and other
openings in the cabinet are designed
for ventilation. Do not cover or block
these vents and openings since
insuffi cient ventilation can cause
overheating and/or shorten the life
of the product. Do not place the
product on a bed, sofa, rug or other
similar surface, since they can block
ventilation openings. This product is
not designed for built-in installation;
do not place the product in an
enclosed place such as a bookcase
or rack, unless proper ventilation
is provided or the manufacturer’s
instructions are followed.
The LCD panel is a very high technology product
with 1,049,088 pixels, giving you fi ne picture details.
Due to the very large number of pixels, occasionally
a few non-active pixels may appear on the screen
as a fi xed point of blue, green or red.
This is within product specifi cations and does not
constitute a fault.
Precautions when
transporting the TV
Be sure to always carry the TV
by two people holding it with two
hands — one hand on each side
of the TV.
• Do not display a still picture for a long time, as this could
cause an afterimage to remain.
• Install the product on the place where the AC cord can
be unplugged easily from the AC outlet, or from the AC
INPUT terminal on the rear of the product.
3
Page 5
Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit “AAA” size battery (g2) AC cord
Used with batteries inserted.
Page 8 Page 12 Page 9
Cable clamp
For bundling cables.
Page 9
Operation manual
Always use the AC cord supplied with
the TV.
Stand unit
Stand base Short screws (g9)
Stand post Hex key Cloth
Put all parts of the stand unit together and then attach it to the TV.
Page 5
Trademarks
• “HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
4
Page 6
Preparation
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confi rm the screws supplied with the TV.
1
Screws (g4)
(used in step 3)
Attach the supporting post for the stand unit
2
onto the base as shown below.
Screw
Screws (g5)
(used in step 2)
Hex
key
3
bottom of the TV.
Insert and tighten the 4 screws into the 4
2
holes on the rear of the TV.
Hex key
Screw
Soft
cushion
Insert the stand into the openings on the
1
• To detach the stand, perform the steps in reverse order.
5
Page 7
Preparation
Part names
TV (Front)
TV/VIDEO button
Channel up (r)/down (s) buttons
Volume up (e)/down (f) buttons
MENU button
POWER (On/Off) button
Remote control sensor
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-37Z33H.
6
OPC sensor
OPC indicator*
SLEEP timer indicator
POWER indicator**
*OPC: Optical Picture Control (See page 32.)
** See page 13 for the TV status indicator.
Page 8
Preparation
TV (Rear)
AC INPUT terminal
INPUT 3 (HDMI) terminals
RS-232C terminal
Headphone jack
MONITOR OUTPUT
terminals
Regarding the headphone jack
• Use headphones with a stereo mini plug (Ø 3.5 mm).
• Be sure to unplug headphones from the jack when they are not
in use.
• The speakers do not output volume when headphones are
plugged in.
• The “Audio” menu cannot be operated when headphones are
plugged in.
• You can set the volume to different levels for each input source.
INPUT 4 (HDMI) terminal
INPUT 5 (PC Input) terminals
INPUT 1 terminals
Antenna input terminal
INPUT 2 terminals
Volume display when headphones are plugged in
20
7
Page 9
Preparation
Remote control unit
POWER (STANDBY/ON)
To switch the power on and
Press to return to the previous
selected channel or external
input mode. (See page 24.)
off. (See page 13.)
(Flashback)
A
0 – 9
Set the channel. (See page 18.)
TV/VIDEO (INPUT SOURCE)
Select an input source. (TV,
INPUT 1, INPUT 2, INPUT 3,
INPUT 4, INPUT 5 (PC)) (See
pages 10, 36 to 38, 39.)
Select the sound multiplex
mode. (See page 25.)
VOLk/VOL
Set the volume. (See page 18.)
Mute the sound. (See page 24.)
Directly select the INPUT 5
terminal. (See page 39.)
a/b/c/d
Select a desired item on the
setting screen.
Return to the default screen.
MPX
(Mute)
e
(Cursor)
EXIT
l
PC
DISPLAY
Display the channel or input
information.
CHr/CH
TV input mode: Select the
channel. (See page 18.)
SLEEP
Set the Sleep timer. (See page
27.)
MENU
Display the menu screen. (See
page 14.)
ENTER
Execute a command.
RETURN
MENU mode: Return to the
previous menu screen. (See
page 14.)
s
Change the wide image mode.
(See pages 30 and 40.)
Freeze a motion picture on the
8
screen. (See page 23.)
WIDE
FREEZE
OPC
To switch the Optical Picture
Control on and off. (See page
32.)
AV MODE
Select an audio and video
setting : AV MODE
(STANDARD, MOVIE, GAME,
USER, DYNAMIC (FIXED),
DYNAMIC), PC MODE
(STANDARD, PC, USER). (See
page 31.)
Page 10
Preparation
Before turning on the power
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
Connecting the antenna cable
1
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Antenna cable
(
commercially available
)
Room antenna terminal
(75-ohm type)
Connecting external devices
2
See pages 10 to 11 for connecting external equipment, such as a VCR and DVD player.
Connecting the AC cord
3
AC outlet
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
Bundling the cables
4
Insert the cable clamp in the hole on the TV as shown.
To antenna
terminal
TV (rear view)
AC cord
Cable clamp
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
9
Page 11
Preparation
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV Decoder (Set Top Box) and PC. To view external source images, select the input source from
TV/VIDEO on the remote control unit or TV/VIDEO on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV Decoder (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using
the INPUT 1/INPUT 2 terminals.
When using component cable
(commercially available)
Y
P
B
(CB)
R
P
(CR)
When using composite cable or
S-VIDEO cable (commercially available)
S-VIDEO
or
R
AUDIO
R
AUDIO
L
VCR/
Game console/
Camcorder
L
VIDEO
VCR/
Game console/
Camcorder
Connecting a DVD player
You can use the INPUT 1/INPUT 2, INPUT 3/INPUT 4 (HDMI) terminals when connecting to a DVD player and
other audiovisual equipment.
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 3. (See page 36.)
When using HDMI-certifi ed cable
(commercially available)
DVD player
10
When using component cable
(commercially available)
Y
P
B
(CB)
R
P
(CR)
R
AUDIO
L
DVD player
Page 12
Preparation
Connecting a Digital TV Decoder (Set Top Box)
You can use the INPUT 1/INPUT 2 or INPUT 3/INPUT 4 (HDMI) terminals when connecting to a Digital TV Decoder
(Set Top Box) and other audiovisual equipment.
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 3. (See page 36.)
When using HDMI-certifi ed cable
(commercially available)
Digital TV
Decoder
(Set Top Box)
Connecting a PC
You can use the INPUT 5 (PC) terminal when connecting
to a PC. (See page 39.)
ANALOG
RGB
When using component cable
(commercially available)
Y
P
B
(CB)
R
P
(CR)
R
AUDIO
L
Digital TV
Decoder
(Set Top Box)
AUDIO
(L/R)
PC
11
Page 13
Preparation
Inserting the batteries
Before using the TV for the fi rst time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1 Open the battery cover. 2 Insert the two supplied “AAA” size
3 Close the battery cover.
batteries.
• Place batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you fi nd any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Using the remote control unit
Use the remote control unit by pointing it towards the
remote sensor window.
Objects between the remote control unit and sensor
window may prevent proper operation.
Remote control sensor
Cautions regarding the remote control unit
• Do not subject the remote control unit to shock.
In addition, do not soak the remote control unit with liquids or place it in
an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor
window of the TV is under direct sunlight or strong lighting. In such
cases, change the angle of the lighting or TV, or operate the remote
control unit closer to the remote sensor window.
30º
5 m
30º 30º
30º
12
Page 14
Preparation
Turning the TV on/off
Turning on the power
Press POWER on the TV.
• POWER indicator (Green): The TV is on. (After a few
seconds, an image appears with sound.)
• After turning the power “ON” by pressing POWER on the
TV, you can turn the power ON/OFF by pressing POWER
on the remote control.
POWER button
POWER indicator
Turning off the power
POWER button
Press POWER on the remote control.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV changes from green to
red.
Press POWER on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by POWER on the TV, you
cannot turn on the power by pressing POWER on the
remote control.
POWER indicator
Light off Power off
Lighted (Red) The TV is in standby mode.
Lighted (Green) The TV is on.
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby
mode.
13
Page 15
Preparation
About Menu operations
What is Menu?
• You need to bring up the On-Screen Display to perform
settings for the TV. The On-Screen Display for the settings
is called “Menu”.
• The Menu enables various settings and adjustments. (See
pages 15 and 16.)
• The Menu can be operated with the remote control unit.
Basic Menu operations
Press MENU and the MENU screen displays.
1
Using the control panel of the TV
H
You can also operate the Menu using the control panel
of the TV.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
TV control panel buttons Remote control buttons
TV/VIDEO ENTER
CH
r a
CH
s b
VOL
kd
Press c/d to select the desired menu, and
2
then press ENTER.
Press a/b to select the desired menu item.
3
Press ENTER to proceed if necessary.
VOL
lc
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
About Guide Display
The Guide Display at the bottom of the screen shows
operations with an On-Screen Display.
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
Press a/b or c/d to select the desired item
4
or adjust the item to the desired level. Press
ENTER if necessary.
Press EXIT or MENU to exit the MENU.
5
Press RETURN as necessary to return to the
previous MENUs.
14
Page 16
Preparation
TV/AV input mode menu items
List of TV/AV menu items to help you with operations
Picture
AV Mode ..................................................................... Page 31
OPC ............................................................................. Page 32
Backlight .................................................................... Page 32
Contrast ...................................................................... Page 32
Brightness .................................................................. Page 32
Colour ......................................................................... Page 32
Tint .............................................................................. Page 32
Sharpness .................................................................. Page 32
Advanced
Colour Temp. .................................................. Page 33
Film Mode ....................................................... Page 33
Black ............................................................... Page 33
3D-Y/C ............................................................ Page 33
Monochrome .................................................. Page 33
Reset ........................................................................... Page 32
Audio
AV Mode ..................................................................... Page 31
Treble .......................................................................... Page 35
Bass ............................................................................ Page 35
Balance ....................................................................... Page 35
Surround ..................................................................... Page 35
Reset ........................................................................... Page 35
Power Control
Setup
Auto Installation ......................................................... Page 17
Programme Setup ..............................................Pages 19-22
Child Lock .................................................................. Page 26
Input Skip ................................................................... Page 38
Input Label ................................................................. Page 38
Position ....................................................................... Page 34
WSS ............................................................................ Page 29
4:3 Mode ..................................................................... Page 29
Standby Mode ............................................................ Page 25
Language .................................................................... Page 18
Reset ........................................................................... Page 46
Option
DNR ............................................................................. Page 34
Input Select
INPUT1 ............................................................ Page 37
INPUT2 ............................................................ Page 37
Output Volume Select ............................................... Page 35
Audio Only .................................................................. Page 24
Game Play Time ......................................................... Page 34
Colour System ........................................................... Page 38
HDMI Setup
Auto View ........................................................ Page 36
Audio Select ................................................... Page 36
No Signal Off .............................................................. Page 27
No Operation Off ....................................................... Page 27
Ecology ....................................................................... Page 28
• Some menu items may not be displayed depending on the selected input source.
15
Page 17
Preparation
PC input mode menu items
List of PC menu items to help you with operations
Picture
AV Mode ..................................................................... Page 31
OPC ............................................................................. Page 32
Backlight .................................................................... Page 32
Contrast ...................................................................... Page 32
Brightness .................................................................. Page 32
Advanced
Colour Temp. .................................................. Page 33
Black ............................................................... Page 33
Reset ........................................................................... Page 32
Audio
AV Mode ..................................................................... Page 31
Treble .......................................................................... Page 35
Bass ............................................................................ Page 35
Balance ....................................................................... Page 35
Surround ..................................................................... Page 35
Reset ........................................................................... Page 35
Power Control
Power Management .................................................. Page 28
No Operation Off ....................................................... Page 27
Ecology ....................................................................... Page 28
Setup
Input Skip ................................................................... Page 38
Input Label ................................................................. Page 38
Standby Mode ............................................................ Page 25
Language .................................................................... Page 18
Reset ........................................................................... Page 46
Option
Input Select
INPUT1 ............................................................ Page 37
INPUT2 ............................................................ Page 37
Output Volume Select ............................................... Page 35
Audio Only .................................................................. Page 24
Game Play Time ......................................................... Page 34
Fine Sync.
Input Signal ..................................................... Page 42
Auto Sync. ...................................................... Page 41
H-Position ....................................................... Page 41
V-Position ....................................................... Page 41
Clock ............................................................... Page 41
Phase .............................................................. Page 41
Reset ............................................................... Page 41
• Some menu items may not be displayed depending on the selected input source.
16
Page 18
Watching TV
Setting channels automatically
You can run auto installation again, even after setting
up the preset channels.
Press MENU and the MENU screen displays.
1
If you have already set the password, enter it
4
here.
• See page 26 for setting a password.
Press a/b to select “Yes”, and then press
5
ENTER.
Press a/b to select the desired language
6
listed on the screen, and then press ENTER.
Press a/b to select the desired sound
system, and then press ENTER.
You do not need to do anything during the
auto search.
“Search is completed.” is displayed. Press
MENU to exit.
Press c/d to select “Setup”.
2
Press a/b to select “Auto Installation”, and
3
then press ENTER.
17
Page 19
Watching TV
Selecting programmes
You can change channels in several ways.
Using CHr/s on the remote control unit
• Press CHr to increase the channel number.
• Press CHs to decrease the channel number.
• CHr/s on the TV operates the same as CHr/s on
the remote control unit.
Using 0 — 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
Adjusting the volume
Changing the volume
You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press VOLk.
• To decrease the volume, press VOLl.
20
• “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4” and
“INPUT5” (PC) modes can store volume adjustment values
separately.
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
Channel display
(Example)
Menu language settings
You can also select a language from setup menu.
Select from among 4 languages: Simplifi ed Chinese,
Traditional Chinese,English and Arabic.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Language”, and then
3
press ENTER.
Press a/b to select the desired language
4
listed on the screen, and then press ENTER.
18
Page 20
Watching TV
Setting channels to your preference
You can run the auto search procedure again at any
time by accessing the Setup menu and Programme
Setup. Channels can be tuned automatically or
manually.
Auto search
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Programme Setup”, and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 26 for setting a password.
Manual setting for each channel
You can set some channel items manually. They are
Search, Fine (TV frequency), Colour System, Sound
System and Skip.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Programme Setup”, and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 26 for setting a password.
Press a/b to select “Manual Adjust”, and
4
then press ENTER.
Press a/b to select “Yes”, and then press
5
ENTER.
Programme Setup “Manual Adjust” menu
Please select channel to be edited.
Press a/b to select “Auto Search”, and then
4
press ENTER.
Press a/b to select “Yes”, and then press
5
ENTER.
Press a/b to select the desired sound
system, and then press ENTER.
“Search is completed.” is displayed. Press
MENU to exit.
01 SAT.1 02 PR07 03 KABEL
You can select one of the following settings.
Search (See page 20.)
1
Fine (See page 20.)
2
Colour system (See page 20.)
3
Sound system (See page 20.)
4
Skip (See page 21.)
5
19
Page 21
Watching TV
Manual setting for each channel (continued)
Search tuning
Press a/b/c/d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information displays.
Press a/b to select “Search”, and then press
2
ENTER.
MENU
Search
Fine
Colour System
Sound System
Skip
As ENTER is pressed, the next channels will
3
be searched in order.
Fine tuning
Press a/b/c/d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information displays.
Press a/b to select “Fine”, and then press
2
ENTER.
Press c/d to adjust the frequency, and then
3
press RETURN or MENU.
• Adjust while checking the background picture as
a reference.
Search
Fine
Colour System
Sound System
Skip
[
Setup
...
Programme Setup
Channel Search.
Set value at desired level
]
179.25 MHz
NEXT
179.25 MHz
Colour system
Press a/b/c/d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information displays.
Press a/b to select “Colour System” and
2
then press ENTER.
• Receivable colour systems are listed.
Colour system menu
Search
Fine
Colour System
Sound System
Skip
Press a/b to select the optimum colour
3
system, and then press ENTER.
Select desired item
AUTO
PAL
SECAM
NTSC 3. 58
NTSC 4. 43
PAL-60
Sound system (Broadcasting system)
Press a/b/c/d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information displays.
Press a/b to select “Sound System”, and
2
then press ENTER.
• Receivable sound systems (Broadcasting systems)
are listed.
Sound system menu
Search
Fine
Colour System
Sound System
Skip
Select desired item
B/G
D/K
I
M
• Instead of the method above, you can also set
by directly entering the frequency number of the
channel with 0 — 9.
• When setting a frequency on the “Fine” screen,
the last fi gure of the frequency needs to be “0” or
“5”.
a
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
20
Press a/b to select the optimum sound
3
system, and then press ENTER.
• Check the sound system if the sound output were not
correct.
Page 22
Watching TV
Manual setting for each channel (continued)
Skipping channels
Channels with “Skip” set to “On” are passed over
when using CHr/s even if selected while watching
the image from the TV.
Press a/b/c/d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information will be displayed.
Press a/b to select “Skip”, and then press
2
ENTER.
• Skip menu displays.
Skip menu
...
[
Setup
MENU
Search
Fine
Colour System
Sound System
Skip
Press a/b to set “Skip” to “On”, and then
3
press ENTER.
Programme Setup
]
Select desired item
Off
On
Sorting programmes
Channel positions can be sorted freely.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Programme Setup”, and
3
then press ENTER.
If you already set the password, enter it here.
• See page 26 for setting a password.
Press a/b to select “Sort”, and then press
4
ENTER.
Press a/b to select “Yes”, and then press
5
ENTER.
Press a/b/c/d to select the channel you
6
want to move, and then press ENTER.
Move it to the desired position by pressing
7
a/b/c/d
Repeat the steps 6 and 7 until all desired
8
channels are sorted.
, and then press ENTER.
Sort menus
Select Sorts Channels.
01
SAT.1 KABEL
07 08 09 10
06
11 12 13 14 15
16 17 18 19 20
Select Sorts Channels.
01
SAT.1 KABEL
07 08 09 10
06
11 12 13 14 15
16 17 18 19 20
Select Sorts Channels.
01
KABEL SAT.1
07 08 09 10
06
11 12 13 14 15
16 17 18 19 20
01 SAT.1
03 02 04 05
01 02 SAT.1 KABEL
03 02 04 05
01 KABEL
03 02 04 05
21
Page 23
Watching TV
Erasing programmes
The individual programme can be erased.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Programme Setup”, and
3
then press ENTER.
If you already set the password, enter it here.
• See page 26 for setting a password.
Press a/b to select “Erase Programme”, and
4
then press ENTER.
Press a/b to select “Yes”, and then press
5
ENTER.
Press a/b/c/d to select the channel you
6
want to erase, and then press ENTER.
Press ENTER to erase the channel.
7
All the subsequent programmes move up.
Repeat the steps 6 and 7 until all desired
8
channels are erased.
Erase programme menus
Select Erase Channels.
01
SAT.1 PRO7 02 KABEL 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19 20
Labelling programmes
Channels can be labelled freely.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Programme Setup”, and
3
then press ENTER.
If you already set the password, enter it here.
• See page 26 for setting a password.
Press a/b to select “Label”, and then press
4
ENTER.
...
[
Setup
MENU
Auto Search
Manual Adjust
Sort
Label
Erase Programme
Press a/b to select “Yes”, and then press
5
ENTER.
Press a/b/c/d to select the channel you
6
want to label, and then press ENTER.
Press a/b to select characters and c/d
7
to move to the desired digit, and then press
Programme Setup
ENTER to complete the label setting.
]
Label Settings.
Yes
No
Select Erase Channels.
01 SAT.1 03 KABEL PRO7 02
06 07 08 09 10
11 12 13 14 15
16 17 18 19 20
Select Erase Channels.
01 SAT.1 02 KABEL
06 07 08 09 10
11 12 13 14 15
16 17 18 19 20
22
03 04 05
04 05
Page 24
Watching TV
Useful viewing functions
Picture and still image
You can freeze a motion picture on the Display.
Press FREEZE.
1
• A moving image displays on the left screen and
a still image displays on the right screen. The still
image is one frame captured from a moving image
at the moment you press FREEZE.
(Example)
Reshoot the still image by pressing ENTER.
2
• Each time you press ENTER, the image on the
right screen updates.
Press RETURN to exit still image.
3
• The still image automatically goes out after 30 minutes.
• When this function is not available,
available” will appear.
“No still image display
23
Page 25
Watching TV
Returning to the previously selected
channel or external input mode
Press A to switch the currently tuned channel to the
previously tuned channel.
Press A again to switch back to the currently tuned
channel.
Press A to toggle between the currently selected
input source and the previously selected one.
Muting the audio temporarily
Using Mute (e) on the remote control unit
mutes the current sound output.
e
Press e.
1
• The sound is silenced.
• “M” is displayed while the mute function is on.
Outputting only audio
When listening to music from a music programme, you
can set the display off and enjoy audio only.
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “Audio Only”, and then
3
press ENTER.
Press a/b to select “On”, and then press
4
ENTER.
Selected item Description
On Audio is output without screen image.
Off
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to “Off”.
Both screen images and audio are output.
Press e again within 30 minutes to cancel the
2
mute.
• Before 30 minutes, the volume level returns to the
previous setting.
• Mute will be cancelled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing VOLk.
24
Page 26
Watching TV
Switching the analogue audio format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
Stereo mode
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and
MONO.
Bilingual mode
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Bilingual mode
When receiving a monaural signal
When you press MPX, “MONO” displays.
Monaural mode
• “BBC2” and “99” are tentative network name and channel.
Reducing the start-up time
When receiving a monaural signal
Each time you press MPX, the mode switches
between NICAM MONO and MONO.
Monaural mode
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between STEREO and MONO.
Stereo mode
You can reduce the TV’s start-up time after the turning
on the power with the remote control unit.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Standby Mode”, and
3
then press ENTER.
Press a/b to select “Mode 1” or “Mode 2”,
4
and then press ENTER.
Selected item Description
Mode 1 Starting the TV is quick from standby.
Mode 2 Power consumption is small during
Press MENU to exit.
5
standby.
25
Page 27
Watching TV
Password setting for the child lock
(for TV input mode)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
Register a 4-digit password number to use the Child
Lock function.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Child Lock”, and then
3
press ENTER.
If you already set the password, enter it here.
4
Setting a channel
Repeat steps 1 to 4 in Setting a password.
1
Press a/b to select “Channel Setting”, and
2
then press ENTER.
Press a/b to select “Yes”, and then press
3
ENTER.
Change Password
Channel Setting
Reset
Press a/b/c/d to select the channel that
4
you wish to apply the Child Lock, and then
Select child lock
Channels.
Yes
No
press ENTER.
Resetting the password
Allows you to reset your password.
Repeat steps 1 to 4 in Setting a password.
1
Press a/b to select “Change Password”, and
5
then press ENTER.
Change Password
Channel Setting
Reset
Enter the 4-digit number as a password using
6
0 — 9.
Change Password
Channel Setting
Reset
Enter the same 4-digit number as in step 6 to
7
confi rm.
• To view a locked channel you must enter a password.
When you select a locked channel, a password prompt
message pops up.
• Press ENTER to display the password input window.
Enter your new password.
Use 4 digits.
New Password
Reconfirm
Enter your new password.
Use 4 digits.
New Password
Reconfirm
Press a/b to select “Reset”, and then press
2
ENTER.
Press a/b to select “Yes”, and then press
3
ENTER.
Change Password
Channel Setting
Reset
• As a precautionary measure, make a note of your
password on the back of this operation manual, cut
it out and keep it in a safe place that children cannot
reach.
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
Clear password.
Yes
No
26
Page 28
Watching TV
Energy conservation settings
Auto power-off at a designated time
This function is conveniently used when, for instance,
going to bed while watching TV.
Press SLEEP.
1
• Remaining time displays when sleep timer has
been set.
Sleep timer: Remain 2hr. 00min.
Each time you press SLEEP, the remaining
2
time switches as shown below.
0hr. 30min. 1hr. 00min. 1hr. 30min.
Off
• The sleep timer indicator on the TV turns red when the
time has been set.
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing SLEEP to cancel the sleep timer.
2hr. 30min. 2hr. 00min.
Auto power-off after the end of broadcast
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals, such as the end of a broadcast
day.
Press MENU and the MENU screen displays.
1
Press c/d to select “Power Control”.
2
Press a/b to select “No Signal Off”, and then
3
press ENTER.
Press a/b to select “Enable”.
4
• Five minutes before the power shuts down, the
remaining time displays every minute.
• “Disable” is the factory preset value.
• When a TV programme fi nishes, and the TV receives signal
input, this function may not operate.
Auto power-off when there are no
operations performed
You can set the TV to automatically power off when no
TV operation is performed for more than 3 hours.
Press MENU and the MENU screen displays.
1
Press c/d to select “Power Control”.
2
Press a/b to select “No Operation Off”, and
3
then press ENTER.
Press a/b to select “30 min” or “3 hour”.
4
• Five minutes before the power shuts down, the
remaining time displays every minute.
• “Disable” is the factory preset value.
27
Page 29
Watching TV
Power Management
You can set the TV to automatically power off when no
image is displayed on PC.
Press MENU and the MENU screen displays.
1
Press c/d to select “Power Control”.
2
Press a/b to select “Power Management”,
3
and then press ENTER.
Press a/b to select “Mode1” or “Mode2”,
4
and then press ENTER.
Select desired item
Off
Mode 1
Mode 2
Selected item Description
Ecology
When set to “Yes”, the TV activates the following
power saving mode.
• “OPC” set to “On” (Page 32)
• “Standby Mode” set to “Mode 2” (Page 25)
• “No Signal Off” set to “Enable” (Page 27)
• “No Operation Off” set to “3 hour” (Page 27)
• “Power Management” set to “Mode 1” (Page 28)
Press MENU and the MENU screen displays.
1
Press c/d to select “Power Control”.
2
Press a/b to select “Ecology”, and then
3
press ENTER.
Press a/b to select “Yes”, and then press
4
ENTER.
• Ecology mode cannot be deactivated by selecting “No”.
Each setting must be changed individually to deactivate
Ecology mode.
Off • No power management
Mode 1 • If no signal inputs for approximately 8
Mode 2 • If no signal inputs for approximately 8
• If you turn off the power by disconnecting AC cord when
setting “Mode 2” in power management, the TV may not
function properly after turning the power on again. In such
case, press POWER on the remote control unit.
• Pressing POWER on the display will have the same result.
• Factory preset value.
minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• The TV turns on again by pressing
POWER. (See page 13.)
seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on.
• The TV turns on again by pressing
POWER. (See page 13.)
28
Page 30
Watching TV
Picture size settings
Selecting the Wide Screen Signalling
(WSS) picture size automatically
WSS allows a television to switch automatically among
the different screen formats.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “WSS”, and then press
3
ENTER.
Press a/b to select “On” or “Off”, and then
4
press ENTER.
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
Selecting the Wide Screen Signalling
(WSS) picture size manually
The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “4:3 Mode”, and then
3
press ENTER.
Press a/b to select “Panorama” or “Normal”,
4
and then press ENTER.
WSS signal 4:3 screen
4:3 mode “Panorama” 4:3 mode “Normal”
Selected item Description
Panorama Wide image without side bars
Normal Normal range keeping 4:3 or 16:9 aspect
ratio
29
Page 31
Watching TV
Selecting the picture size manually (for TV/AV Input mode)
Manual Selection
You can select different picture sizes that account for
the kind of each picture.
Press WIDE.
1
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
WIDE MODE
Normal
Zoom 14:9
Panorama
Full
Cinema 16:9
Cinema 14:9
Auto Selection
If you set “WSS” and “4:3 Mode” in the Setup menu
on page 29, the optimum WIDE mode is automatically
chosen for every broadcast containing the WSS
information.
“WSS” menu
To enable Auto Selection, set “WSS” in the Setup
menu to “On”. (See page 29.)
“4:3 Mode” menu
To set the type of the wide screen, select “Panorama”
or “Normal” in the 4:3 Mode menu. (See page 29.)
4:3 Mode set to “Panorama” 4:3 Mode set to “Normal”
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is
enabled.
Press WIDE or a/b while the WIDE MODE
2
menu displays on the screen.
• As you toggle down the options, each mode is
immediately refl ected on the TV.
Selected item Description
Normal For 4:3 “standard” pictures. A side bar appears on each side.
Zoom 14:9 For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and
Panorama In this mode the picture is progressively stretched toward each side of the screen.
Full For 16:9 squeeze pictures.
Cinema 16:9 For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Cinema 14:9 For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Underscan Display with an Underscan image only when receiving a 720p signal. Display with the High-Defi nition image
Normal
bottom with some programmes.
adjusted optimally. Noise may appear on the edge of the screen with some programmes.
Zoom 14:9 Panorama
• Some picture sizes may not be
displayable depending on the
input signal.
Cinema 14:9 Cinema 16:9 Full
30
Page 32
Watching TV
Selecting a preset AV MODE
The AV MODE function enables you to select
appropriate settings for audio and video to account for
the system environment which can vary due to factors
like room brightness, type of programme watched or
the type of image input from external equipment.
Using AV MODE on the remote control unit
Press AV MODE.
1
• Present AV MODE displays.
Press AV MODE again before the mode
2
displayed on the screen disappears.
• The mode changes as shown below.
AV input mode
AV Mode : STANDARD
AV Mode : MOVIE
Selected item Description
STANDARD For a highly defi ned image in a normally
MOVIE For a movie
GAME Lowers image brightness for easier
PC For PC. (Available only when inputting an
USER Allows the user to customise settings as
DYNAMIC
(FIXED)
DYNAMIC For a clear-cut image emphasising high
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
• During PC input mode, only “STANDARD”, “PC” and
“USER” can be selected under the AV mode selection.
bright room
viewing.
HDMI or PC signal.)
desired. You can set the mode for each
input source.
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
contrast for sports viewing.
AV Mode : DYNAMIC
AV Mode : DYNAMIC (FIXED)
AV Mode : USER (TV)
AV Mode : GAME
AV Mode : PC
PC input mode
AV Mode : STANDARD
AV Mode : USER ( )
AV Mode : PC
Using AV Mode on the menu screen
Press MENU and the MENU screen displays.
1
Press c/d to select “Picture”.
2
Press a/b to select “AV Mode”, and then
3
press ENTER.
Press a/b to select the desired item, and
4
then press ENTER.
31
Page 33
Watching TV
Manual picture settings
Picture adjustment
You can adjust the picture to your preference.
Follow the steps to adjust the picture.
OPC (Optical Picture Control) setting
H
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
OPC indicator
Press MENU and the MENU screen displays.
1
Press c/d to select “Picture”.
2
Press a/b to select the desired menu item.
3
Press ENTER to proceed if necessary.
Press a/b or c/d to select the desired item
4
or adjust the item to the desired level. Press
ENTER if necessary.
• For resetting all adjustment items to factory preset values,
pressa/b to select “Reset”, press ENTER, press a/b to
select “Yes”, and then press ENTER.
• “Backlight” cannot be adjusted when “OPC” is set to “On”
or “On (Display)”.
• Select “Advanced” and then press ENTER to set “Colour
Temp.”, “Film Mode”, “Black”, “3D-Y/C” or “Monochrome”.
(See page 33.)
Selected item
Backlight The screen dims The screen
Contrast For less contrast For more contrast
Brightness For less brightness
Colour For less colour
Tint Skin tones become
Sharpness For less sharpness
c
intensity
purplish
button
button
d
brightens
For more brightness
For more colour
intensity
Skin tones become
greenish
For more sharpness
Using OPC on the remote control unit
Press OPC to switch the OPC function on and off.
Using OPC on the menu screen
Press MENU and the MENU screen displays.
1
Press c/d to select “Picture”.
2
Press a/b to select “OPC”, and then press
3
ENTER.
Press a/b to select the desired item, and
4
then press ENTER.
Selected item Description
On (Display) Displays the OPC effect on the screen
On Automatically adjusts
Off The brightness is fi xed at the value set in
while adjusting the brightness of the
screen.
“Backlight” (See this page).
OPC indicator
Light off “Off” is selected in the OPC setting.
Lighted (Green) “On” or “On (Display)” is selected in the
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
• The OPC may not work when the light in the surround is
too bright or too dark,only the change of the light occured
that the OPC [the icon of the greenery] will be displayed.
OPC setting.
32
Page 34
Watching TV
Advanced picture settings
The advanced settings enable you to set the picture
adjustment in more detail. There are fi ve options you
can choose from.
Press MENU and the MENU screen displays.
1
Press c/d to select “Picture”.
2
Press a/b to select “Advanced”, and then
3
press ENTER.
Press a/b to select the desired menu, and
4
then press ENTER.
Press a/b to select the desired level, and
5
then press ENTER if necessary.
Colour Temp. (Colour Temperature)
H
Adjusts the colour temperature to give the best white
image.
Selected item Description
High
Mid-High
Middle
Mid-Low
Low
Film Mode
H
Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
fi lm frame for high-defi nition picture quality.
Press MENU and the MENU screen displays.
1
Press c/d to select “Picture”.
2
Press a/b to select “Advanced”, and then
3
press ENTER.
Press a/b to select “Film Mode”, and then
4
press ENTER.
White with bluish tone
White with reddish tone
H Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
Selected item Description
On For high detail in black portions
Off No adjustment
3D-Y/C
H
Provides high quality images with minimal dot crawl
and cross colour noise.
Selected item Description
Standard Normal adjustment
Fast For movie image
Slow For still image
Off 3D-Y/C off
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Monochrome
H
For viewing images in monochrome.
Press MENU and the MENU screen displays.
1
Press c/d to select “Picture”.
2
Press a/b to select “Advanced”, and then
3
press ENTER.
Press a/b to select “Monochrome”, and
4
then press ENTER.
Press a/b to select “On”, and then press
5
ENTER .
Press a/b to select “On”, and then press
5
ENTER.
• This model is not compalible to 1080/24p input signal.
33
Page 35
Watching TV
Other picture settings
DNR (Digital Noise Reduction)
Reduces noise on the screen and produces a clearer
video image.
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “DNR”, and then press
3
ENTER.
Press a/b to select the desired level, and
4
then press ENTER.
Select desired item
Off
High
Low
Adjusting the image position
For adjusting a picture's horizontal and vertical position.
Press MENU and the MENU screen displays.
1
Game Play Time
This function displays the elapsed game time so you
do not lose track of the time.
To display the elapsed time, select “GAME” under “AV
Mode” for the input mode of the terminal connected to
the game console before starting the game.
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “Game Play Time”, and
3
then press ENTER.
Press a/b to select “On”, and then press
4
ENTER.
Selected item Description
On The elapsed time is displayed every 30
Off No adjustment
minutes when you switch to GAME mode
in external input mode.
Press c/d to select “Setup”.
2
Press a/b to select “Position”, and then
3
press ENTER.
Press a/b to select “H-Position” or
4
“V-Position”.
Set value at desired level
H-Position [ 0] +
V-Position [ 0]
Reset
Selected item Description
H-Position Centres the image by moving it to the left
V-Position Centres the image by moving it up or
Press c/d to adjust the item to your desired
5
position.
• For resetting all adjustment items to the factory preset values,
press a/b to select “Reset”, and then press ENTER.
• Adjustments are stored separately according to input
source.
• Images may not be displayed properly depending on the
settings and/or signals.
34
or right.
down.
+
Page 36
Watching TV
Audio adjustment
You can adjust the audio of the selected AV mode.
Press MENU and the MENU screen displays.
1
Press c/d to select “Audio”.
2
Press a/b to select the desired menu item.
3
Press ENTER to proceed if necessary.
Press a/b or c/d to select the desired item
4
or adjust the item to the desired level. Press
ENTER if necessary.
Selected item
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio from
button
c
the right speaker
dbutton
Decrease audio
from the left speaker
Output Volume Select
Allows you to select what controls the audio output.
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “Output Volume Select”,
3
and then press ENTER.
Press a/b to select “Fixed” or “Variable”, and
4
then press ENTER.
Select desired item
Fixed
Variable
Selected item Description
Fixed • Sound via speakers/headphone is
adjusted with VOL e/f on the remote
control unit or the TV.
• Sound via the MONITOR OUTPUT
terminal is not adjustable and constantly
outputs.
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, press ENTER, press
to select “Yes”, and then press ENTER.
a/b
• “Surround” cannot be selected under “Dynamic (Fixed)” for
“AV Mode” setting.
• “Balance” cannot be adjusted when “Surround” is set to
“On”.
H Surround
When you set to “On”, you can enjoy surround sound,
the same as if you were in a movie theatre.
Selected item Description
On Makes it possible to enjoy natural,
Off Outputs the normal sound.
realistic surround sound.
Variable • Sound via the MONITOR OUTPUT
terminal is adjusted with VOL e/f on
the remote control unit or the TV.
• Sound via speakers/headphone is muted.
• The “Audio” menu cannot be operated when headphones
are plugged in or when “Variable” is selected.
35
Page 37
Settings when using external devices
Settings when using HDMI output devices
HDMI terminals can carry audio and visual signals to the TV with an HDMI certifi ed cable. When you want to output
the audio and picture from an HDMI output device on the TV, select “INPUT3” or “INPUT4” by switching the input
source.
Co
nnecting an HDMI output device
HDMI output
device
HDMI cable (commercially available)
HDMI (High-Defi nition Multimedia Interface)
H
terminal selection
To watch an HDMI equipment image, select
1
“INPUT3” or “INPUT4” usingTV/VIDEO on the
remote control unit or TV/VIDEO on the TV.
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “HDMI Setup”, and then
4
press ENTER.
• The HDMI Setup can be selected only when
“INPUT3” or “INPUT4” is selected.
HDMI Setup
items
Auto View Enable/
Audio
Select
• Refer to your external equipment operation manual for the
above settings.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
• “Audio Select” is only available for INPUT3.
Selectable
items
Disable
Digital/
Analogue
Description
Set whether or not to use
WIDE MODE based on
signal recognition, including
an HDMI signal.
Select “Digital” for audio
signal via the HDMI terminal.
Select “Analogue” for audio
signal via the AUDIO jack.
Press a/b to select the desired item, and
5
then press ENTER.
36
Page 38
Settings when using external devices
Selecting the input source and
signal type
Selecting input source
Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO allows you to choose from the available
input sources.
Press TV/VIDEO on the remote control unit or
1
on the TV.
Press TV/VIDEO on the remote control unit or
2
on the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
.
a/b
Selecting input signal type
For setting the signal type of external equipment.
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “Input Select”, and then
3
press ENTER.
Press a/b to select a signal type you want to
4
set, and then press ENTER.
Input source Selectable item
INPUT 1 Auto, COMPONENT, S-VIDEO, VIDEO
INPUT 2 Auto, COMPONENT, VIDEO
•
If no colour image displays, try changing the other
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to “Auto”, the input terminal
where a cable is connected is automatically selected.
• When the signal type is set to “Auto” and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
INPUT 1: COMPONENT s S-VIDEO s VIDEO
INPUT 2: COMPONENT s VIDEO
37
Page 39
Settings when using external devices
Labelling input sources
You can assign each input source a label as you
prefer.
Press TV/VIDEO to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Input Label”, and then
4
press ENTER.
• When an HDMI input terminal (INPUT 3 and
INPUT 4) is selected, a Menu screen for selecting
“Auto” or “Manual” is displayed.
• When you select “Auto” using a/b, the Menu
screen returns to the “Input Label” Menu screen.
Press a/b to select characters and c/d
5
to move to the desired digit to label the input
source.
• When you want to change the input label that you
have already assigned to the default name, press
to move to “CLEAR” on the “Input Label”
c/d
screen, and then press ENTER.
Repeat the above until the name is fully spelt
6
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press MENU to exit from
the labelling menu.
Skipping HDMI/PC input
This setting allows you to skip the HDMI or PC input
on the Input Selection Operation.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Input Skip”, and then
3
press ENTER.
Press a/b to select the Input (INPUT 3 to
4
INPUT 5) you wish to skip, and then press
ENTER.
Select desired item
Press a/b to select “Yes”, and then press
5
ENTER.
Press MENU to exit.
6
Colour system settings
You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “Colour System”, and
3
then press ENTER.
(Example)
• You cannot change labels if the input source is TV.
38
Press a/b to select a compatible video signal
4
system of your equipment, and then press
ENTER.
Select desired item
AUTO
PAL
SECAM
NTSC 3. 58
NTSC 4. 43
PAL-60
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• “Colour System” is selectable only when inputting an
S-VIDEO or composite signal.
Page 40
Connecting a PC
Use the PC terminals to connect a PC.
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 44 for a list of PC signals compatible with the TV.
ANALOG
RGB
RGB cable
(commercially available)
Ø 3.5 mm stereo
minijack cable
(commercially available)
AUDIO
(L/R)
PC
Signal names for 15-pin mini D-sub connector
Pin No. Signal name Pin No. Signal name Pin No. Signal name
Not connected +5V VD
CSYNC GND (Ground) SCL
• Macintosh adaptor may be required for use for some Macintosh computers.
15
5
10
4 3
9
14
13
2
1
6
7
8
12
11
Displaying a PC image on the screen
R GND (Ground) Not connected
G GND (Ground) SDA
B GND (Ground) HD
To view an image from a PC, select “INPUT 5” using
direct key PC, TV/VIDEO on the remote control unit or
TV/VIDEO on the TV.
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
When connecting to a PC, the correct input signal type
is automatically detected. (See page 42.)
• Each time TV/VIDEO is pressed, the input source toggles.
39
Page 41
Connecting a PC
Selecting the picture size
You can select the picture size as illustrated below.
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
Connecting a PC
ANALOG
RGB
RGB cable
(commercially available)
Ø 3.5mm stereo
minijack cable
(commercially available)
AUDIO
(L/R)
PC
a
Picture size images.
Input Signal FullNormal
1024 g 768
1360 g 768
Keeps the original aspect
ratio in a full screen
display.
Press WIDE.
1
• The WIDE MODE menu displays.
WIDE MODE
Normal
Full
(Example)
Press WIDE or a/b to select a desired item
2
on the menu.
An image fully fi lls the
screen.
40
Page 42
Connecting a PC
Adjusting the PC image automatically
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “Fine Sync.”, and then
3
press ENTER.
Press a/b to select “Auto Sync.”, and then
4
press ENTER.
Press a/b to select “Yes”, and then press
5
ENTER.
• Auto Sync. starts.
Input Signal
Auto Sync.
H-Position [ 90]
V-Position [ 60]
Clock [ 90]
Phase
Reset
Select desired item
Yes
No
[ 8]
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “Fine Sync.”, and then
3
press ENTER.
Press a/b to select a specifi c adjustment
4
item among “H-Position”, “V-Position”, “Clock”
and “Phase”.
Input Signal
Auto Sync.
H-Position
V-Position
Clock
Phase
Reset
[90]
[60]
[90]
[ 8]
Selected item Description
+
+
+
+
• Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (e.g. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
H-Position Centres the image by moving it to the left
or right.
V-Position Centres the image by moving it up or
down.
Clock Adjusts when the image fl ickers with
vertical stripes.
Phase Adjusts when characters have low
contrast or when the image fl ickers.
Press c/d to adjust the item to your desired
5
position.
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
41
Page 43
Connecting a PC
Input resolution settings
Selecting the input resolution
• Some input signals may have to be registered manually to
display properly.
• The pairs of input signals (resolutions) in the list below are
not distinguishable when received. In such case, you have
to set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
1024 x 768 1360 x 768
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 2 input signals listed above.
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “Fine Sync.”, and then
3
press ENTER.
Press a/b to select “Input Signal”, and then
4
press ENTER.
Press a/b to select the desired input signal
5
on the display, and then press ENTER.
[ 90]
[ 60]
[ 90]
[ 8]
Select desired item
1024 x 768
1360 x 768
(Example)
Input Signal
Auto Sync.
H-Position
V-Position
Clock
Phase
Reset
42
Page 44
Connecting a PC
PC Control of the TV
• When a programme is set, the TV can be controlled from the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and
settings can be made, enabling automatic programmed playing.
• Attach an RS-232C cable cross-type (commercially available) to the RS-232C for the connections.
• This operation system should be used by a person who is accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC to match the communications conditions of the TV. The
communications settings of the TV are as follows:
Baud rate:
Data length:
Parity bit:
Stop bit:
Flow control:
9,600 bps
8 bits
None
1 bit
None
Communication procedure
Send the control commands from the PC via the RS-232C connector.
The TV operates according to the received command and sends a response message to the PC.
Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the
next command.
Command format
Eight ASCII codes e CR
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits Parameter 4-digits Return code
Parameter
Input the parameter values, aligning left, and fi ll with space(s) for the remainder. (Be sure that four values are input for the
parameter.)
When the input parameter is not correct, “ERR” returns. (Refer to “Response code format”.)
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 — 9, space, ?
0
0 0 0 9
a 3 0
1 0 0
0 0 5 5
When “?” is input for some commands, the present setting value responds.
?
? ? ? ?
Response code format
Normal response
O K
Return code (0DH)
Problem response (communication error or incorrect command)
E R R
Return code (0DH)
43
Page 45
Connecting a PC
PC compatibility chart ( INPUT 5 )
Resolution
VGA
SVGA
Horizontal
Frequency
720 g 400 31.5 kHz 70 Hz
640 g 480 31.5 kHz 60 Hz
640 g 480 37.9 kHz 72 Hz
640 g 480 37.5 kHz 75 Hz
800 g 600 35.1 kHz 56 Hz
800 g 600 37.9 kHz 60 Hz
800 g 600 48.1 kHz 72 Hz
800 g 600 46.9 kHz 75 Hz
Vertical
Frequency
VESA
Standard
✓
✓
✓
✓
✓
✓
✓
Resolution
1024 g 768 48.4 kHz 60 Hz
XGA 1024 g 768 56.5 kHz 70 Hz
1024 g 768 60.0 kHz 75 Hz
WXGA 1360 g 768 47.7 kHz 60 Hz
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Corp.
RS-232C commands list
Commands
• Commands not indicated here are not guaranteed to operate.
CONTROL ITEM COMMAND PARAMETER
0
R
W
POWER SETTING
INPUT SELECTION A
CHANNEL
INPUT SELECTION B
AV MODE
SELECTION
O
P
T
I
T
I
A
I
C
D
H
C
H
C
N
I
N
I
N
I
N
I
N
I
N
I
N
I
V
A
V
A
V
A
V
A
V
A
V
A
V
A
V
A
_
POWER OFF (STANDBY)
_
_
_
D
G
_
INPUT SWITCHING (TOGGLE)
_
_
_
D
V
_
TV (CHANNEL FIXED)
_
_
D
V
_
INPUT1—5 (1—5)
_
_
*
H
C
*
P
U
_
W
D
_
1
P
0
1
P
1
1
P
2
1
P
3
2
P
0
2
P
1
2
P
3
D
M
0
D
M
1
D
M
2
D
M
3
D
M
4
D
M
5
D
M
6
D
M
7
TV DIRECT CHANNEL (1—99)
_
_
*
CHANNEL UP
_
_
_
CHANNEL DOWN
_
_
_
INPUT1 (Auto)
_
_
_
INPUT1 (COMPONENT)
_
_
_
INPUT1 (S-VIDEO)
_
_
_
INPUT1 (VIDEO)
_
_
_
INPUT2 (Auto)
_
_
_
INPUT2 (COMPONENT)
_
_
_
INPUT2 (VIDEO)
_
_
_
TOGGLE
_
_
_
STANDARD
_
_
_
MOVIE
_
_
_
GAME
_
_
_
USER
_
_
_
DYNAMIC (FIXED)
_
_
_
DYNAMIC
_
_
_
PC
_
_
_
• If an underbar (_) appears in the parameter column, enter a
space.
• If an asterisk (*) appears, enter a value in the range
indicated in brackets under CONTROL CONTENTS.
CONTROL
CONTENTS
CONTROL ITEM COMMAND PARAMETER
VOLUME
POSITION
WIDE MODE
MUTE
SURROUND
AUDIO CHANGE
SLEEP TIMER
Horizontal
Frequency
Vertical
Frequency
VESA
Standard
✓
✓
✓
✓
CONTROL
CONTENTS
M
L
O
V
H
H
V
V
C
P
W
W
W
W
W
W
W
W
M
M
M
A
A
A
A
O
O
O
O
O
O
*
S
O
P
*
S
O
P
*
S
O
P
*
S
O
P
*
K
C
L
*
E
S
H
*
E
D
I
0
E
D
I
1
E
D
I
2
E
D
I
3
E
D
I
4
E
D
I
5
E
D
I
6
E
D
I
7
E
T
U
0
E
T
U
1
E
T
U
2
U
S
C
0
U
S
C
1
U
S
C
2
A
H
C
_
M
T
F
0
M
T
F
1
M
T
F
2
M
T
F
3
M
T
F
4
M
T
F
5
VOLUME (0—60)
_
_
*
H-POSITION (AV) (f10—10)
_
*
*
H-POSITION (PC) (0—180)
_
*
*
V-POSITION (AV) (f20—20)
_
*
*
V-POSITION (PC) (0—120)
_
*
*
CLOCK (0—180)
_
*
*
PHASE (0—15)
_
*
_
TOGGLE
_
_
_
NORMAL
_
_
_
ZOOM 14:9
_
_
_
PANORAMA
_
_
_
FULL
_
_
_
CINEMA 16:9
_
_
_
CINEMA 14:9
_
_
_
UNDERSCAN
_
_
_
TOGGLE
_
_
_
MUTE ON
_
_
_
MUTE OFF
_
_
_
SURROUND TOGGLE
_
_
_
SURROUND ON
_
_
_
SURROUND OFF
_
_
_
TOGGLE
_
_
_
OFF
_
_
_
SLEEP TIMER 30 MIN
_
_
_
SLEEP TIMER 1 HOUR
_
_
_
SLEEP TIMER 1 HOUR 30 MIN
_
_
_
SLEEP TIMER 2 HOUR
_
_
_
SLEEP TIMER 2 HOUR 30 MIN
_
_
_
44
Page 46
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV
serviced.
Problem Possible Solution
• No power. • Check if you pressed POWER on the remote control unit. (See page 13.)
• Unit cannot be operated. • External infl uences such as lightning, static electricity, etc., may cause improper
• Remote control unit does not
operate.
• Picture is cut off. • Is the image position correct? (See page 34.)
• Strange colour, light colour, or
dark, or colour misalignment.
• Power is suddenly turned off. • The unit’s internal temperature has increased.
• No picture. • Is the connection to external equipment correct? (See pages 10, 11, 36, 39 and 40.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected? (See page 9.)
• Has the power been turned on? (See page 13.)
operation. In this case, operate the unit after fi rst turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Are batteries inserted with polarity (e, f) aligned? (See page 12.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fl uorescent lighting?
• Is a fl uorescent light shining on the remote control sensor?
• Are screen mode adjustments such as picture size made correctly? (See pages 29,
30 and 40.)
• Adjust the picture tone. (See pages 32 to 34.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 20 and 38.)
• Check the input signal setting. (See page 42.)
• Check the HDMI Setup setting. (See page 36.)
Remove any objects blocking the vent or clean.
• Check the power control setting. (See pages 27 and 28.)
• Is the sleep timer set? (See page 27.)
• Has the input signal setup been performed correctly after connection? (See page
42.)
• Is the correct input selected? (See page 37.)
• Is the picture adjustment correct? (See pages 32 to 34.)
• Is the antenna connected properly? (See page 9.)
• Is “On” selected in “Audio Only”? (See page 24.)
• No sound. • Is the volume too low? (See page 18.)
• The TV sometimes makes a
cracking sound.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
• Make sure that headphones are not connected. (See page 7.)
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV’s
performance.
45
Page 47
Appendix
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Reset”, and then press
3
ENTER.
Press a/b to select “Yes”, and then press
4
ENTER.
• When “Reset” is completed, the backlight will turn
off and then on in a short period of time.
• The screen will be returned to its original state.
• “Execute auto installation” displays on the screen.
Press a/b to select “Yes” and then press
5
ENTER.
• “Auto installation” will be executed.
• If you execute “Reset”, all the settings such as Picture,
Audio, Programme and Language will be reset to the
factory preset values.
46
Page 48
Appendix
Specifi cations
Model
Item
LCD panel 32o (800 mm) Advanced Super View &
Resolution 1,049,088 pixels (1366 g 768)
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
Function
Brightness 450 cd/m
Backlight life 60,000 hours (at Backlight Standard position)
Viewing angles H : 176º V : 176º
Audio amplifi er 10W g 2
Speakers 10 g 4 cm 2pcs 15 g 4 cm 2pcs
Terminals
OSD language Simplifi ed Chinese/Traditional Chinese/English/Arabic
Power Requirement AC 110—240 V, 50/60 Hz
Power Consumption 133 W (0.8 W Standby) 168 W (0.8 W Standby)
Weight
Operating Temperature 0°C — 40°C
TV-Standard PAL: B/G, D/K, I SECAM: B/G, D/K, K/K
Receiving
Channel
TV-Tuning System Auto Preset 99 ch
STEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G
Rear Antenna input UHF/VHF 75 q DIN type
VHF/UHF 44.25—863.25 MHz
CATV S1—S41ch (including Hyperband)
INPUT 1 VIDEO in, AUDIO in, S-VIDEO in,
INPUT 2 VIDEO in, AUDIO in,
INPUT 3 HDMI (HDMI input) (480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz),
INPUT 4
INPUT 5 (PC input) 15 pin mini D-sub, AUDIO in (Ø 3.5 mm jack)
MONITOR OUT VIDEO out, AUDIO out (S-Terminal in, MONITOR OUT no out)
RS-232C 9 pin mini D-sub male connector
Headphone Ø 3.5 mm jack (Audio output)
without stand 10.5 kg 14.0 kg
with stand 12.5 kg 16.0 kg
BLACK TFT LCD
COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
AUDIO in (Ø 3.5 mm jack)
HDMI (HDMI input) (480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
LC-32Z33H LC-37Z33H
37o (940 mm) Advanced Super View &
BLACK TFT LCD
1
NTSC: M
2
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product
improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
Optional accessory
The listed optional accessory is available for the LCD colour
TV. Please purchase it at your nearest shop.
• Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability.
Part name Model number
Wall mount bracket
(for LC-32Z33H/
LC-37Z33H)
AN-37AG5
47
Page 49
Appendix
Dimensional drawings
Unit: mm
• Figures within parentheses are for LC-37Z33H.
48
Page 50
Appendix
Mounting the TV on the wall
Removing the stand
For wall mounting with the optional bracket, remove the stand.
Before detaching/attaching the stand
• Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.
• Remove all terminal covers and connected cables.
• Lay the TV down on cushioning (such as a blanket) over a table.
• Make sure two or more people perform the operation.
CAUTION
• Do not remove the stand from the TV unless using an optional bracket to mount it.
1
Hex key
2
Stand post
Detach the stand from the TV. (Hold the stand so
1
it will not drop from the edge of the base area.)
Unfasten the four screws used to secure the stand in
place.
• To attach the stand, perform the above steps in reverse order.
Remove the stand post from the stand base and
2
attach it to the TV.
Handling and precautions with the wall-mounted TV
• You can mount the TV on the wall using the optional AN-37AG5 bracket.
• For details, refer to the instructions supplied with the optional bracket.
CAUTION
• This TV should be mounted on the wall only with the AN-37AG5 (SHARP) wall mount bracket. The use of other wall
mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualifi ed service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualifi ed service personnel about using an optional AN-37AG5 bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-37AG5 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting Angular mounting
• Detach the cable clamps on the rear of the TV when using the optional mount bracket.
• To use this TV mounted on a wall, fi rst remove the cover at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the TV.
About setting the TV angle
°
0
2
/
5
1
/
0
1
/
5
/
0
AN-37AG5
49
Page 51
Appendix
CLEARING THE PASSWORD
If you forget your password, set a new password using the following procedure.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Child Lock”, and then press ENTER.
3
The password input screen displays.
4
If you enter “3001” using 0 — 9, the “Child Lock” setting menu will be displayed.
5
Enter the 4-digit number as a password using 0 — 9. (See page 26.)
6
The new password is now set.
The Password is .
• As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.
50
Page 52
Printed in Malaysia
馬來西亞印刷
TINS-E051WJZZ
08P12-MA-NP
Loading...