Sharp AQUOS LC-26P50E, AQUOS LC-32P50E, AQUOS LC-37P50E Operation Manual
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISION COULEUR À ÉCRAN
À CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
SHARP CORPORATION
LC-26P50E LC-32P50E LC-37P50E
Printed in Spain
Gedruckt in Spanien
Imprimé en Espagne
Stampato in Spagna
Gedrukt in Spanje
Impreso en España
TINS-B845WJZZ
OPERATION MANUAL / BEDIENUNGSANLEITUNG / MODE D’EMPLOI / MANUALE DI ISTRUZIONI / GEBRUIKSAANWIJZING / MANUAL DE MANEJO
LC-26P50E
LC-32P50E
LC-37P50E
B845WJZZ
1
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
NEDERLANDS
ESPAÑOL
05P06-SP-NG
PIN
Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico
1
OPERATION MANUAL
ENGLISH
Contents …………………………………………………… 1
Dear SHARP customer …………………………………… 2
Important Safety Precautions ………………………… 2
Supplied accessories …………………………………… 2
Preparation ………………………………………………… 3
Setting the TV ………………………………………… 3
Inserting the batteries ………………………………… 4
Using the remote control unit ………………………… 4
Cautions regarding the remote control unit … 4
Part names ………………………………………………… 5
Remote control unit …………………………………… 5
TV (Front view) ………………………………………… 6
TV (Rear view) ………………………………………… 6
Using external equipment ……………………………… 7
Connecting a VCR …………………………………… 7
Connecting a DVD player …………………………… 7
Connecting a game console or camcorder ………… 7
Connecting a decoder ……………………………… 7
Using AV Link function ……………………………… 8
Watching TV ……………………………………………… 8
Turning on the power ………………………………… 8
Standby mode ………………………………………… 8
Turning off the power ………………………………… 8
Initial auto installation ………………………………… 8
Menu operations ………………………………………… 9
Menu operation buttons ……………………………… 9
On-Screen Display …………………………………… 9
Common operations ………………………………… 9
Picture menu …………………………………………… 10
AV Mode…………………………………………… 10
OPC …………………………………………… 10
Picture adjustments ……………………………… 10
Advanced ………………………………………… 10
Colour Temp. ………………………………… 10
Black ………………………………………… 11
3D-Y/C ……………………………………… 11
Monochrome ………………………………… 11
Film Mode …………………………………… 11
I/P Setting …………………………………… 11
Audio menu …………………………………………… 11
AV Mode…………………………………………… 11
Audio adjustments ……………………………… 11
Surround…………………………………………… 11
Contents
Power Control menu ………………………………… 12
No Signal Off ……………………………………… 12
No Operation Off ………………………………… 12
Setup menu …………………………………………… 12
Auto Installation ………………………………… 12
Programme Setup………………………………… 12
Auto Search ………………………………… 12
Manual Adjust ……………………………… 13
Fine ……………………………………… 13
Colour sys. ……………………………… 13
Sound sys. (Broadcasting system)…… 13
Label …………………………………… 13
Skip ……………………………………… 13
Decoder ………………………………… 13
Lock ……………………………………… 13
Sort …………………………………………… 13
Erase Programme …………………………… 13
Child Lock ………………………………………… 14
Input Label ………………………………………… 14
Position …………………………………………… 14
WSS (Wide Screen Signalling) ………………… 14
4:3 Mode ………………………………………… 15
Rotate …………………………………………… 15
Language ………………………………………… 15
Option menu …………………………………………… 15
Audio Only ………………………………………… 15
DNR (Digital Noise Reduction) ………………… 15
HDMI Setup ……………………………………… 15
Input Select ……………………………………… 16
Quick Shoot ……………………………………… 16
Colour System …………………………………… 16
Demo …………………………………………… 16
Useful features …………………………………………… 16
WIDE MODE …………………………………………… 16
Still image …………………………………………… 17
Teletext function ……………………………………… 17
Appendix …………………………………………………… 18
Troubleshooting ……………………………………… 18
HOW TO SET THE FACTORY PRESETS …………… 18
About RESET and SYSTEM RESET ………………… 18
Specifications ………………………………………… 19
End of life disposal …………………………………… 20
• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from
the actual operations.
• The examples used throughout this manual are based on the LC-32P50E model.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
ENGLISH
LC-26P50E_GB_a 05.6.13, 7:59 AM1
2
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of troublefree operation of your product, please read the Important Safety Precautions carefully before using this product.
Dear SHARP customer
• Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the
product. Do not use liquid cleaners or aerosol cleaners.
• Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can
cause the product to fall, resulting in serious personal injuries as well as damage to the product.
Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with
the product. When mounting the product on a wall, be sure to follow the manufacturer’s
instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops,
excessive force and uneven floor surface can cause the product to fall from the cart.
• Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since
they can block ventilation openings. This product is not designed for built-in installation; do not place the product
in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s
instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heatgenerating products (including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• There is power consumption always if main plug is connected.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as
a fixed point of blue, green or red.
This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speaker. Be sure to always carry the TV by
two people holding it with two hands—one hand on each side of the display.
Important Safety Precautions
Supplied accessories
Remote control unit (g1) AC cord (g1)
Page 4 and 5
Product shape varies in
some countries.
Page 3
• “AAA” size battery (g2) ...... Page 4
• Operation manual
Cable clamp (g1)
Page 3
Cable tie (g1)
Page 3
LC-26P50E_GB_a 05.6.13, 7:59 AM2
3
Preparation
Setting the TV
Bundling the cables
Setting the TV on the wall
• Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting
or mounting that results in accident or injury.
• You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.
Standard DIN45325 plug (IEC 169-2)
75-ohm coaxial cable
Removing the terminal cover
Press down the hooks to remove the
cover toward you or the left of TV.
TV (Rear view)
AC cord
Product shape
varies in some
countries.
Cable clamp
LC-26P50E LC-32/37P50E
Cable tie
LC-26P50E_GB_a 05.6.13, 7:59 AM3
4
Preparation
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
30°30°
Remote control sensor
7 m
1 Press and slide the battery cover to open it.
2 Insert two supplied “AAA” size batteries.
• Place batteries with their terminals corresponding
to the (e) and (f) indications in the battery
compartment.
3 Close the battery cover.
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight. The
heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote control sensor
of the TV is under direct sunlight or strong lighting. In such case, change
the angle of the lighting or TV, or operate the remote control unit closer to
the remote control sensor.
LC-26P50E_GB_a 05.6.13, 7:59 AM4
5
Remote control unit
Part names
Selectable items
NICAM STEREO, MONO
NICAM CH A, NICAM CH B,
NICAM CH AB, MONO
NICAM MONO, MONO
Signal
Stereo
Bilingual
Monaural
Selectable items
STEREO, MONO
CH A, CH B, CH AB
MONO
Signal
Stereo
Bilingual
Monaural
NOTE
• When no signal is input, the sound mode will display “MONO”.
3 (Freeze/Hold)
(See page 17.)
B (Standby/On)
Enter standby mode or
turn on the power.
(See page 8.)
[ (Subtitle for Teletext)
(See page 17.)
END
Exit the menu screen.
i (k/l) (Volume)
i (k) Increase the volume.
i (l) Decrease the volume.
0–9
Set the channel in TV mode.
Set the page in Teletext mode.
A (Flashback)
Press to return to the previous
image in normal viewing mode.
2 (Sound mode)
Select the sound multiplex mode.
SURROUND
Switch the surround effects on
and off.
1 (Subpage)
(See page 17.)
SLEEP
Set the sleep timer in units of 30
min. up to max. 2hr. 30min.
k (Reveal hidden Teletext)
(See page 17.)
p (Display information)
(See page 17.)
RETURN
Return to the previous menu
screen.
e (Mute)
Switch the sound on and off.
b (INPUT SOURCE)
Select an input source.
(TV, EXT1, EXT2, EXT3, EXT4)
(See page 7.)
f (WIDE MODE)
Change the wide image.
(See page 16.)
Set the area of magnification in
Teletext mode. (See page 17.)
MENU
Display the MENU screen.
(See page 9.)
P (r/s)
TV: Select the channel.
External: Switch to TV input mode.
Teletext: Move to the next/previous
page.
OK
Execute a command.
a/b/c/d (Cursor)
Select a desired item on the
setting screen.
Colour (Red/Green/Yellow/
Blue)
(See page 17.)
m (Teletext)
(See page 17.)
NICAM TV broadcasts selection
A2 TV broadcasts selection
LC-26P50E_GB_a 05.6.13, 7:59 AM5
6
TV (Front view)
Part names
TV (Rear view)
Antenna input terminal
OPC sensor
Remote control sensor
B (Standby/On) indicator
OPC indicator
a (Power button)
b (Input button)
i (l/k) (Volume buttons)
P (s/r)
(Programme (channel) buttons)
SLEEP indicator
EXT 1 (RGB) terminal
EXT 3 terminals
SYSTEM RESET
Headphone jack
RESET
EXT 2 (RGB) terminal
EXT 4 (HDMI/AUDIO)
terminals
AC INPUT
terminal
AUDIO OUTPUT terminals
LC-26P50E_GB_a 05.6.13, 7:59 AM6
Loading...