Sharp AQUOS LC-13AV4U, AQUOS LC-20AV4U, AQUOS LC-15AV4U User Manual

• The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken
glass pieces in case the LCD panel breaks.

• The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on
the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

• To prevent fire, never place any type of candle or flames on the top or near the TV set.

• To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product.

FEATURES

● MTS/SAP Tuner

● 181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.

● PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized

electronic tuning system provides free and easy channel selection and lets you tune
directly to any channel using the Number buttons (0~9 and +100-key) on the
remote control.

● On-Screen Function Display

● Remote Control

● Sleep Timer

● Closed Caption Decoder- You may view specially labeled (cc) TV programs,

movies, news, prerecorded tapes, etc. with either a dialogue caption or text display
added to the program.

● Auto Shut Off Function- If there is no signal input from the antenna terminal for
5 minutes or no user operation for 180 minutes, the TV will turn itself off automati­cally.

● AV Mode- Allows you to select from five picture options that will adjust colors to
enhance your viewing experience.

● V-CHIP- Enables parents to prevent their children from watching inappropriate mate-
rial on TV.

● S-VIDEO Input- Allows you to get better picture detail and clarity for the playback
of S-VHS VCR tapes, DVDs, Satellite System or Video Cameras.

● Progressive Scan Input- You can enjoy high quality definition using the
Component Video input jacks if you connect other equipment that has Progressive
Scan System.

PRECAUTIONS

●

Place your TV in a room with adequate ventilation.

●

Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

●

Do not place your TV on soft surfaces, such as rugs or blankets.

●

Leave enough room for air to circulate around the bottom, top and back of the set.

OPERATION
MANUAL

1EMN20472/9HS1EMN20472

L3270UA/L3170UA/L3670UA*****

Printed in China

LCD COLOR TV
LC-13AV4U

(13 INCH EASEL TYPE TABLE STAND)

LC-15AV4U

(15 INCH PEDESTAL TYPE TABLE STAND)

LC-20AV4U

(20 INCH PEDESTAL TYPE TABLE STAND)

This manual describes the LC-13AV4U, LC-15AV4U
and LC-20AV4U. These three models are different
in size and shape, but operate identically.
The LC-20AV4U is illustrated in this manual.

Products that have earned the ENERGY STAR®are designed to protect
the environment through superior energy efficiency.

The important note is located on the rear of the cabinet.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

U.S.A. ONLY

CAUTION:

DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL
CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND,
TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. A PRODUCTAND CART COMBINATION SHOULD BE MOVED WITH CARE. QUICK
STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org

The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other
vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

U.S.A. ONLY

IMPORTANT:

To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided.
The numbers are located at the rear of the TV.

Model No.:

Serial No.:

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER SERVICE­ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER­VICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DANGER­OUS VOLTAGE CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT WITHIN THIS
UNIT.

THIS SYMBOL INDICATES THAT THERE ARE
IMPOTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE LITERATURE
ACCOMPANYING THE APPLIANCE.

Remote control unit
(9HSUREMT21SH001)
Batteries ("AA" x 2)

SUPPLIED ACCESSORIES

Operation Manual
(9HS1EMN20472)
(9HS1EMN20473)

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp LCD COLOR TV. To ensure safety and many years of trouble-free operation of your product,
please read the IMPORTANT SAFEGUARDS carefully before using this product.

IMPORTANT SAFEGUARDS

1. Read instructions-All the safety and operating instructions should be read before
the appliance is operated.

2. Retain Instructions-The safety and operating instructions should be retained for
future reference.

3. Heed Warnings-All warnings on the appliance and in the operating instructions
should be adhered to.

4. Follow Instructions-All operating and use instructions should be followed.

5. Cleaning-Unplug TV from the wall outlet before cleaning. Do not use liquid clean­ers or aerosol cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted service and that for some
specific reason, such as the possibility of the loss of an authorization code for a
CATV converter, is not intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the appliance in the clean­ing description otherwise required in item 5.

6. Attachments-Do not use attachments not recommended by the TV manufacturer as
they may cause hazards.

7. Water and Moisture-Do not use this TV near water, for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming
pool, and the like.

8. Accessories-Do not place this TV on an unstable cart,
stand, tripod, bracket, or table. The TV may fall, causing
serious injury to someone, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with
the TV.
Any mounting of the appliance should follow the manu­facturer’s instructions and should use a mounting acces­sory recommended by the manufacturer. An appliance
and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.

9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided
for ventilation and to ensure reliable operation of the TV and to protect it from over­heating, these openings must not be blocked or covered. The openings should never
be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV
should never be placed near or over a radiator or heat register. This TV should not
be placed in a built-in installation such as a bookcase or rack unless proper ventila­tion is provided or the manufacturer’s instructions have been adhered to.

10. Power Sources-This TV should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power company. For TVs intend­ed to operate from battery power, or other sources, refer to the operating instruc­tions.

11.Grounding or Polarization-This TV is equipped with a polarized alternating-current
line plug(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety pur­pose of the polarized plug.

12. Power-Cord Protection-Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying par­ticular attention to cords at plugs, convenience receptacles, and the point where they
exit from the appliance.

13. Outdoor Antenna grounding-If an outside antenna or cable system is connected to
the TV, be sure the antenna or cable system is grounded so as to provide some pro­tection against voltage surges and built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements for the grounding elec­trode. (Fig. A)

14. Lightning-For added protection for this TV receiver during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent damage to
the TV due to lightning and power-line surges.

15. Power Lines-An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light of power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.

16. Overloading-Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.

17. Object and Liquid Entry-Never push objects of any kind into this TV through open­ings as they may touch dangerous voltage points or short out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the TV.

18. Servicing-Do not attempt to service this TV yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to quali­fied service personnel.

19. Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing
to qualified service personnel under the following conditions:

a. When the power supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the TV.

c. If the TV has been exposed to rain or water.

d. If the TV does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions, as improper
adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the TV to its normal operation.

e. If the TV has been dropped or damaged in any way.

f. When the TV exhibits a distinct change in performance-this indicates a need for

service.

20. Replacement Parts-When replacement parts are required, be sure the service techni­cian uses replacement parts specified by the manufacturer that have the same char­acteristics as the original part. Unauthorized substitutions may result in fire, electric
shock, injury to persons or other hazards.

21. Safety Check-Upon completion of any service or repairs to this TV, ask the service
technician to perform routine safety checks to determine that the TV is in proper
operating condition.

22. Heat-This TV product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.

CONNECTIONS

VHF Antenna
(Not supplied)

UHF Antenna
(Not supplied)

VHF/UHF Combiner
(Not supplied)

VHF/UHF
Combination Antenna
(Not supplied)

OR

OUT IN

75-ohm
Coaxial Cable
(Not supplied)

From Cable System

From Cable System
or Satellite Antenna
75-ohm
Coaxial Cable
(Not supplied)

CATV Box

*

or Satellite Box
(Not supplied)

*Some cable TV systems use scrambled signals

and require a special converter to receive these
channels. Consult your local cable company.

RF Cable
(Not supplied)

[ANTENNA CONNECTION] [CATV/SATELLITE CONNECTION]

OR OROR OROR

PORTABLE CART WARNING

S3126A

EXAMPLE OF ANTENNA GROUNDING AS PER

S2898A

FIGURE A

NATIONAL ELECTRICAL CODE

ELECTRIC
SERVICE
EQUIPMENT

NEC - NATIONAL ELECTRICAL CODE

GROUND
CLAMP

ANTENNA
LEAD IN
WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

LC-20AV4U

1. MENU button- Press to display the menu on the TV screen.

2. VOL(ume) +/– buttons- Press to control the volume level.
Press to determine the setting mode from the menu on the TV screen.

- Press the VOL + button to select each item.

- Press the VOL – button to go back to the previous menu.
Press to select or adjust from a particular menu (for example:
Language Selection, Channel Presetting, Closed Caption selection,
AV mode selection, adjust of the Picture control adjustments or V­CHIP Set Up).

3. CH (annel) ▲/▼ buttons- Press to select memorized channels.
Press to select the setting mode from the menu on the TV screen.
Press to select item you want to adjust in the picture control mode.

4. INPUT button- Press to select TV or Video input (AV1 or AV2)
mode. (See USING AUDIO/VIDEO INPUT JACKS.)

5. POWER button- Press to turn the TV ON or OFF (standby).

6. Power indicator- Lights up when power is on.

7. Infrared Sensor Window

8. Number buttons- Press two digits to directly access the desired chan-
nel. Remember to press a "0" before a single digit channel.
100 button- Press to select cable channels higher than 99.

9. FLASHBACK button- Press to go back to the previously viewed
channel. For example, pressing this button once will change channel
display from CH 6 (present channel) to CH 10 (previously viewed
channel) and pressing it a second time will return from CH 10 to CH 6.

10. MUTE button- Press to mute the sound portion of the TV program
(Volume level display turns light RED from light BLUE). Press this
button again or press the VOL + or – button to recall sound.

11. DISPLAY button- Press to display
on screen the channel number, input
source, TV sound or the remaining
minutes on your sleep timer. If you
press it again, the display will disap­pear.

12. COMPONENT (Y/P

B/PR

) Video

input jacks- AV2: Connect to the

component video out jacks of a
DVD or set top box, etc.
If HDTV (720p/1080i) signals are
input to these jacks, "NOT
AVAILABLE" will appear on the
black background.

13. AUDIO L/R input jacks- AV2:
Connect to the left/right audio output
jacks of a DVD or set top box, etc.

14. S-VIDEO input jack- AV1:
Connect to the S-VIDEO output
jack of a video camera or VCR.
Note: When you connect using both
VIDEO and S-VIDEO cables simul­taneously, the S-VIDEO jack is
given priority over the VIDEO jack.

15. VIDEO input jack- AV1: Connect
to the video output jack of a video
camera, VCR or video game.

16. AUDIO L/R input jacks- AV1: Connect to the left/right audio output
jacks of a video camera, VCR or video game.
Note: The AUDIO L (input) jack is for monaural input. The sound is
heard from both speakers. Use this jack for monaural audio equipment
to be hooked up.

17. ANT(enna). in jack- Connect to an antenna, cable system or satellite
system.

18. HEADPHONE jack- Connect headphone (not supplied) for personal
listening.
Note: Do not connect earphones that have an L-shaped plug. The plug
may interfere with the cabinet.

[INSTALLING THE BATTERIES]

1) Remove the battery compartment cover on the remote unit.

2) Insert 2 "AA" batteries into battery compartment in the direction as
indicated by the polarity (+/–) markings. Batteries installed with incor­rect polarity may damage the remote unit.

3) Replace the cover.

TABLE STAND

EASEL TYPE

(LC-13AV4U)
The angle of the TV has to be kept at 18°.

CAUTION :

Be careful not to hurt your fingers with the
stand. Do not pick up the TV by its stand.

PEDESTAL TYPE

(LC-15AV4U, LC-20AV4U)
Adjust the stand to change the angle of the TV

(-2.5°~10°).

CAUTION :

Be careful not to hurt your fingers with the table
stand.

OPERATING CONTROLS AND FUNCTIONS

REAR PANEL

LC-13AV4U

LC-15AV4U
LC-20AV4U

17 2 345 6

1 2 345

6 7

REMOTE CONTROL

LC-20AV4U

12

13

14

15

5

123

8

4

7809

9

2

10

4

56

100

3

1

11

LCDTV

16

17

18

18°

°

-2.5

1

0

°