Sharp AQUOS K SHF32 Settings Manual

Please read this manual first

Setting Guide

Thank you for buying the “AQUOS K SHF32” (simply called the “product” from here on).
This manual describes the settings and precautions for using the product.

* For illustrations and descriptions in this manual, refer to “Basic Manual” available on the au homepage and on the product.
* The company names and product names appearing in this manual are trademarks or registered trademarks of their respective holders.
* Phone illustrations and screen shots are for descriptive purposes only, and may dif
* In this manual, “microSD™ memory card (commercially available)” and “microSDHC™ memory card (commercially available)” are abbreviated as

“microSD memory card” or “microSD”.

When using the product

Describes things to note when using the
product.

Basic Operations

Describes basic key operation and touch
operation using Touch Cruiser EX.

Preparing the Product for Use

■ Attaching/Removing Battery Pack

■ Attaching/Removing the au Nano IC

Card 04

■ Attaching/Removing the microSD

Memory Card

■ Charging

■ Turning the Power On/Off

Initial Settings

Set an au ID etc. to use various services
provided by au.

■ Switching the Display Language to

English

■ au ID setting

Checking Onscreen Status

Check the signal reception strength, battery
level, etc. onscreen.

June2015,1stEdition

fer from the actual product.

E-mail Settings

Set for using E-mail (@ezweb.ne.jp). An e-mail
address is set automatically in the initial
settings. You can change the e-mail address
set in the initial settings.

Transferring Data with the au Backup
App

You can copy data from your old au phone to
the product using a microSD memory card.
You can also back up data on the product to a
microSD memory card.

Reducing Battery Consumption

You can reduce battery consumption by
enabling energy saving.

Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: SHARP CORPORATION

When using the product

Note the following when using the product.

● When you purchase the product, the battery is not fully charged. Be sure to charge the battery before use.

● To maintain water resistance, attach the back cover firmly.

Basic Operations

Basic key operations and touch operation are described here. For detailed operation, refer to the “Basic Manual”.

■ Key Names and Functions

Names of keys on the product and their functions are described.

①
②
③
④
⑤

⑥

⑦

⑧
⑨
⑩

⑪

⑫

⑬

① d Cursor key
s Left key/incoming history
f Right key/outgoing history
e Up key
c Down key

② u Address book key
③ j Mail key
④ , Clear key
⑤ m Call key
⑥ 0 – 9, -, ^ Number

⑭

⑮

keys

⑦ b Recent apps key
Displays list of running

applications. Hold down to set/
cancel Veilview.

⑧ k Center key
⑨ o Camera key

⑩ l Browser/Apps key

Displays browser menu. Hold down

to display applications list.

⑪ . Power/End call key
While using the product, end call or

exit functions. Hold down to turn the
power on, or to display a power
menu for power off, restart, or other
operations.

⑫

Touch area

⑬ n Tethering key
⑭ zq Volume up/down key

v

⑮

Shutter/Manner key

■ Touch Operation (Touch Cruiser EX)

Use your fingers in the touch area to operate in the same way as a touchpad (Touch Cruiser EX).
Activating a function/application (browser, LINE, etc.) compatible with Touch Cruiser EX enables Touch Cruiser EX and “
displayed.

● Hold down m to toggle Touch Cruiser EX on/off. If a function/application is exited while Touch Cruiser EX is disabled, reactivating a

Touch Cruiser-capable function/application does not enable Touch Cruiser EX.

Tap/Double tap Long touch

Gently tap the touch area. To double­tap, tap the same position twice.

Keep gently touching the touch area.

” changes to “ ”. Tap the touch

“
area or, after releasing your finger and
several seconds of no operation, the
indication returns to “

”.

” (pointer) is

● Turn off the power and remove the battery pack and any microSD memory card beforehand.

● Attaching

Slowly pull the au Nano IC Card 04 tray straight out by
hooking a finger on it.

au Nano IC Card 04 tray

Slowly insert the au Nano IC Card 04 tray into the au Nano IC
Card 04 tray slot.

• Confirm the position of the au Nano IC Card 04 tray slot

and the orientation of the au Nano IC Card 04 tray carefully,
and insert the tray all the way into the slot in the direction of
the arrow. Inserting the tray forcibly may damage the tray.

● Removing

Slowly pull the au Nano IC Card 04 tray straight out by
hooking a finger on it.

au Nano IC Card 04 tray

Put the au Nano IC Card 04 on the au Nano IC Card 04 tray.

• Make sure the notches on the au Nano IC Card 04 and au

Nano IC Card 04 tray face the proper orientation and put
the card slowly on the tray.

IC (metal) part up

au Nano IC Card 04

Notches

au Nano IC Card 04 tray

au Nano IC Card 04

au Nano IC Card 04 tray slot

Remove the au Nano IC Card 04 from the au Nano IC Card
04 tray.

au Nano IC Card 04

au Nano IC Card 04 tray

■ Attaching/Removing the microSD Memory Card

You can save, move, and copy data by attaching a microSD memory card (including microSDHC memory card) in the product.

● Turn off the power and remove the battery pack beforehand.

● A microSD memory card initialized on other devices may not work on the product properly. Format the microSD memory card on this

product. Use the following steps.
When the standby screen is displayed, press k → [Settings] → [Other settings]
Unlock → [Erase everything].

● Make sure that the top/bottom and front/rear of the microSD memory card are facing correctly. Trying to force a wrongly oriented card

into the slot could make it impossible to remove the card or result in damage.

● Do not touch the terminal part of a microSD memory card.

● Attaching

Confirm the orientation for inserting the microSD memory
card, then insert gently without bending until it clicks in place.

microSD logo side up

→ [Storage] → [Erase microSD] → [Erase SD card] →

Slide Flick

Long-touch the touch area to change
“
While gently touching the touch area,
slide in the desired direction or to the
desired position.

” to “

”.

Long-touch the touch area to change
“
Flick your finger on the touch area up,
down, left, or right.

” to “

”.

Pinch

While touching the touch area with two
fingers, widen (pinch out) or close
(pinch in) your fingers.

Preparing the Product for Use

● Always turn the power off before installing or removing the battery pack, au Nano IC Card 04, or a microSD memory card.

● Attach the battery pack after checking that the au Nano IC Card 04 tray is firmly in place.

● To maintain water resistance, firmly close the back cover without leaving any gaps.

● Attaching items improperly may result in damage to the battery pack or back cover.

■ Attaching/Removing Battery Pack

● Attaching
While keeping the back cover held in the middle (①), pull

the back cover by the notch in the direction shown to
remove (②).

Notch

②

Locate the contacts on the product, and slide in the battery
pack firmly in the direction shown.

● Removing

Gently push the microSD memory card in all the way until it
clicks.

• After it clicks, let the microSD memory card come back out

a little without releasing it. Releasing the card when it is
pushed deeply into the slot may cause it to pop out.

Slowly pull the microSD memory card straight out.

■ Charging

● While charging, the charging/incoming indicator illuminates in red. When the battery pack is charged to approximately 95%, the

charging/incoming indicator illuminates in green. When charging is finished, the charging/incoming indicator goes out.

● While charging, it is normal for the product to become hot.

● Depending on the operation procedure and usage environment, the temperature inside the product may get high and the product may

even get heated. In such case, charging may stop for security reasons.

● If you perform various operations with a specified charger (sold separately) connected to the product, charging/discharging may take

place repeatedly in a short time. Frequently charging the internal battery shortens its service life.

● If the charging/incoming indicator flashes in red, check whether the battery pack is attached and connected properly. If the indicator

continues to flash, stop charging and contact an au shop or the Keitai Guarantee Service Center.

● Charging with a common AC adapter 05 (sold separately)/common DC adapter 03 (sold separately)

Confirm the direction of the microUSB plug of the common
AC adapter 05 (sold separately)/common DC adapter 03
(sold separately) and insert it in the direction of the arrow to
the external connection jack of the product.

External

connection jack

Plug the common AC adapter 05 (sold separately) power
plug into a 100 V AC power outlet/Plug the common DC
adapter 03 (sold separately) plug into a cigarette lighter
socket.

①

Place the back cover on the product. Press along the edges of the back cover in the direction

● Removing
While keeping the back cover held in the middle (①), pull

the back cover by the notch in the direction shown to
remove (②).

Notch

②

①

shown to close firmly.

Lift the battery pack by the tab (using fingernail, etc.) in the
direction shown to remove.

Contacts

Battery pack

Battery pack

Tab

Protruding

edges

● Charging with a desktop holder (sold separately) and common AC adapter 05 (sold separately)

Insert the microUSB plug of the common AC adapter 05
(sold separately) to the connection jack of the desktop
holder (sold separately).

Plug the common AC adapter 05 (sold separately) power
plug into a 100 V AC power outlet.

Common AC adapter 05 (sold separately)/
Common DC adapter 03 (sold separately)

Connection jack

Protruding edges

Common AC adapter 05
(sold separately)

Common AC adapter 05
(sold separately)

Mount the product in the desktop holder (sold separately).

Common DC adapter 03
(sold separately)

Common AC adapter 05
(sold separately)

■ Attaching/Removing the au Nano IC Card 04

The au Nano IC Card 04 contains your personal information such as your phone number. The product is compatible with au Nano IC Card
04 only. You cannot use an au IC card other than au Nano IC Card 04.

au Nano IC Card 04

IC (metal) part

● When the au Nano IC Card 04 is not inserted

If the au Nano IC Card 04 is not inserted, the following operations are unavailable.

• Making*/Receiving a call

• Sending/Receiving a mail

• Confirming your own phone number

• Setting SIM card lock

* Making an emergency call to 110 (Police), 119 (Fire and Ambulance) and 118 (Regional Coast Guard) and making a call to 157 (Customer

Service Center) are also unavailable.
Besides the above, functions which require your phone number etc. may not be available.
You cannot insert and use the product with an au IC card other than the au Nano IC Card 04.

● Restricting product use with a PIN code

Your au Nano IC Card 04 contains valuable personal information. To protect this information, you can change the PIN code and lock the
SIM card to restrict use by other persons.

● When handling the au Nano IC Card 04, observe the following to avoid malfunction and

damage.

• Do not touch the IC (metal) part on the au Nano IC Card 04 or the IC card terminals on

the product.

• Confirm the correct orientation for installing.

• Do not forcefully install or remove.

● Be careful not to lose the removed au Nano IC Card 04.

● Make sure to unplug the microUSB plug of the common AC adapter 05 (sold separately)

etc. from the product when attaching or removing the au Nano IC Card 04.

Common AC adapter 05
(sold separately)

● Charging with a PC

If you use the microUSB cable to charge the battery, it may take the battery longer to be fully charged than if you use the specified AC
adapter (sold separately).

Connect the microUSB cable 01 (sold separately) to a USB
port of a PC after the PC is activated completely.

USB port of a PC

microUSB cable 01
(sold separately)

Connect the microUSB cable 01 (sold separately) to the
external connection jack of the product.

External

connection jack

microUSB cable 01
(sold separately)

Protruding edges

■ Turning the Power On/Off

● Turning the Power On ● Turning the Power Off

.

(hold down for at least 2

seconds).

.

(hold down for at least 2

seconds).

[Power off].

Initial Settings

The first time the power is turned on, a screen for making initial settings is displayed, and you can set an au ID.

● To make initial settings in English, press . → [はい] (Yes) once the "端末初期設定" (Device initial settings) screen is displayed, cancel

initial settings, and then switch to English display. After switching to English display, restart the product, and an English screen for
making initial settings will be displayed.

■ Switching the Display Language to English

You can switch the display language for function names and other items to English.

Transferring Data with the au Backup App

You can copy data to the product from a previously used au phone using a microSD memory card. Also, you can back up data on the
product to a microSD memory card.

● To return data using a microSD memory card, save the data from the old au phone to the microSD memory card beforehand.

* For a smartphone, back up data with the au Backup App. For a cell phone, back up contacts with the microSD menu.

■ How to Copy/Restore Data with the au Backup App

● Restoring contacts, photos, etc.

When the standby screen is

displayed, press k
→ [設定] (Settings).

[その他] (Other settings) →

[言語(Language)を選択]

(Select language).

[English].

■ au ID setting

An au ID is an identifier for customers using au services. Register your au phone number as an au ID.
By setting an au ID, you can use various services provided by au such as au スマートパス(au Smart Pass), auお客さまサポート(au
Customer Support), and au WALLET.

● Alternatively, when the standby screen is displayed, press k → [Settings] → [au ID setting].

o

(Next).

Confirm the contents → [OK]. Confirm the contents → [同意

して次へ] (Agree and Next).

Enter the security code →

[次へ] (Next).

*

When the standby screen is

displayed, press k →

[Service].

Select data to restore →

* If a confirmation screen, etc. is displayed, follow the onscreen instructions.

● Copying cell phone data

o

(Start).

*

[au Backup App]*. [Backup/Restore your data

k

(Finish).

with SD card].

[Restore Contacts, Photos,

etc.].

au ID setting is complete.

Press . → [Yes] to return to

the standby screen.

* The security code is the 4-digit number set at subscription.

Checking Onscreen Status

Check the signal strength and battery level onscreen.

① Signal strength (Receiving electric field)

– : Level display　 : Out of service area

• The icon indicating network is displayed at the upper left.

: 4G (LTE) available
: Roaming

• During a communication, the icon is displayed with

superimposed.

② Battery level

– : Battery level display　 : No battery

• While charging, the battery icon is displayed with

superimposed.

E-mail Settings

E-mail (@ezweb.ne.jp) is a service which enables you to exchange e-mails with other cell phones which support e-mail and with PCs. An
e-mail address is set automatically in the initial settings. You can change the e-mail address set in the initial settings.

■ Initial Settings

When the standby screen is

displayed, press k →

[Service].

Select data to copy →

* If a confirmation screen, etc. is displayed, follow the onscreen instructions.

o

(Start).

*

[au Backup App]*. [Backup/Restore your data

[Finish].

■ How to Save Data from the au Backup App

● Saving data to a microSD memory card manually

with SD card].

[Restore from Feature Phone].

When the standby screen is

displayed, press j.

■ Changing E-mail Address

When the standby screen is

displayed, press j.

Confirm the contents

→ [接続する] (Connect).

u

(Submenu) →

[E-mail settings].

Confirm the contents

→ [閉じる] (Close).

[Other settings]. Confirm the contents →

[接続する] (Connect) →

[Eメールアドレスの変更へ]

(To change e-mail address).

When the standby screen is

displayed, press k →

[Service].

Select data to back up →

o

(Next).

*1 If a confirmation screen, etc. is displayed, follow the onscreen instructions.
*2 Selecting “Set the password” allows you to set a password for data being backed up.

● Setting automatic backup

[au Backup App]*1. [Backup/Restore your data

[Start]*2.

with SD card].

k

[Backup Contacts, Photos,

etc.].

(Finish).

Enter the security code

→ [送信] (Send).

* The security code is the 4-digit number set at subscription.

*

Confirm the contents

→ [承諾する] (Accept).

Enter an e-mail address

→ [送信] (Send).

[OK] → [閉じる] (Close).

■ Backing Up E-mail

● If a microSD memory card is inserted into the product, e-mails are saved on the card. If not, they are saved on the internal memory.

When the standby screen is

displayed, press j.

u

(Submenu) →

[E-mail settings].

[Backup/Restore] →

[Mail Backup] → [OK].

Select the character code →

[OK] → Select folders to

back up → [OK].

When the standby screen is

displayed, press k →

[Service].

Select “To back up” →

k

(ON) to set “ON” →

Set “Backup data type” and

“Automatic start date”.

* If a confirmation screen, etc. is displayed, follow the onscreen instructions.

[au Backup App]*. [Backup/Restore your data

with SD card].

[Automatic Backup Settings].

Viewing/Playing data

You can view/play data on the product by the following operations.

● When the standby screen is displayed, press k → [Datafolder] → Select the category → k → Select the data to display →

* Alternatively, you can select u (Submenu) → [Move/copy] while data is selected to move or copy data to a microSD memory card.

Reducing Battery Consumption

You can reduce battery consumption by enabling energy saving.

● Enabling energy saving may prevent some applications from operating properly.

k

When the standby screen is

displayed, press k

→ [Settings].

Set each item → ,. Select “Energy saving” →

[Energy saving/battery].

k

(ON) to set “ON”.

[Energy saving settings].

o

(Edit).