Sharp Aquos 40LE653U, Aquos 32LE653U, aqos, LC-40LE653U, LC-32LE653U Operation Manual

>>

>>

<<

Contents

ENG Contents

1. Part Names

1-1. TV
1-2. Remote Control Unit

2. Watching TV

2-1. Displaying an External Equipment Image
2-2. Initial Installation

3. Direct Button Operation

3-1. Changing Channels
3-2. Changing Volume
3-3. MUTE
3-4. FREEZE
3-5. FLASHBACK
3-6. SMART
3-7. NETFLIX
3-8. AUDIO
3-9. Sleep Timer
3-10. AV MODE
3-12. Closed Captions and Digital Closed Captions
3-14. VIEW MODE

4. On-Screen Display Menu

4-1. Introduction
4-3. On -Screen Display Menu Operation
4-4. Menu Operation Buttons
4-5. Initial Setup
4-14. Information
4-17. Picture Settings
4-21. Audio Settings
4-22. Smart TV
4-25. System Options

5. Enjoying Photo/Music/Video Playback

5-1. Preparation
5-2. Selecting the Folders to Play Back
5-4. Playing Back Files on a USB Memory
Device/Home Network Server

6. Using LINK Operation

6-1. Controlling HDMI Equipment Using LINK
Operation
6-3. Using a Smartphone with the TV

7. Using the Internet

7-1. Connecting to the Internet
7-2. Internet Setup
7-5. Entering Text (Software Keyboard)
7-7. Using the Browser
7-11. Using Keyboard and Mouse
7-12. Using Applications via the Internet
7-14. Notes

8. Using the Miracast devices

8-1. Miracast devices

9. Appendix

9-1. Removing the Stand
9-2. Setting the TV on the Wall
9-4. Troubleshooting
9-6. Troubleshooting - Error Message

10. Specifications

10- 1. TV
10- 3. Wireless LAN

11. Trademarks

12. Dimensional Drawings

The dimensional drawings for the LCD TV set are shown
on the inside back cover.

13. Software License

>>

<<

ENG Important1

>>

<<

ENG Important2

>>

<<

ENG Important3

>>

<<

ENG Important4

>>

<<

ENG Important5

>>

<<

Part Names

ENG 1-1

TV

(Front)

* See page 4 -26.

(Side)

* See pages 2-1 and 4-4 for button operations.

(Rear)

*1 See the Setup Guide.

And see page 6-1 for external equipment connection.

*2

See page 6-2. for details on the Audio Return Channel.

*3

See page 6-3. for details on the MHL function.

*4

See page 4-12 for details on the Input Select function.

*5

See page 4-12 for details on the audio select of HDMI 1+ Analog.

The illustrations and on -screen displays in this operation manual are for explanation purposes
and may vary slightly from the actual operations.

NOTE

LC-40LE653U POWER
button is on the left
side (front view).

>>

<<

Part Names

ENG 1-2

Remote Control Unit

1 POWER: Switch the TV power on or enter standby.
2 0–9: Set the channel.

(See page 3-1.)

3 • (DOT): Set the channel.

(See page 3-1.)

4 DISPLAY: Display the channel information.
5 FREEZE: Set the still image. Press again to return to normal screen.

(See page 3- 4.)

6 VOL+/-: Set the volume.

(See page 3- 2.)

7 TV: Direct switch TV source.
8 SmartCentral: Display the application window.

(See page 3- 6.)

9 USB: Direct switch USB source.
10

/ / / , ENTER: Select a desired item on the screen.
11 EXIT: Turn off the menu screen.
12 FAVORITE CH: Set the favorite channels.

(See page 4- 7.)

13 A, B, C, D: Select 4 preset favorite channels in 4 different categories.

(See page 4- 7.)

While watching, you can toggle the selected channels by pressing A, B, C and D.
14 SLEEP: Set the sleep timer.

(See page 3- 9.)

15 CC: Display captions from a closed -caption source.

(See page 3- 12 to 3-13)

16 External equipment operational buttons: Operate the external equipment.
17 VIEW MODE: Select the screen size.

(See pages 3- 14 to 3-16.)

18 AV MODE: Select an audio or video setting.

(See page 3- 10.)

NOTE

When using the remote control unit,
point it at the TV.

>>

<<

Part Names

ENG 1-3

Remote Control Unit (Continue)

19 FAV APP 1, 2, 3: You can assign your favorite applications to these buttons.

(See page 7- 12.)

20 NETFLIX: Display the Netflix screen.
If you press the NETFLIX button when the TV is turned off, the TV turns on and the NETFLIX
screen is displayed.

(See page 3- 7.)

21 RETURN: Return to the previous menu screen.
22 E-MANU: Display the operation manual.
23 MENU: Display the menu screen.

(See page 4- 1.)

24 CH

/ : Select the channel.

(See page 3- 1.)

25 MUTE: Mute the sound.

(See page 3- 3.)

26 FLASHBACK: Return to the previous channel or external input mode.

(See page 3- 5.)

27 AUDIO: Selects the MTS/SAP or the audio mode during multichannel audio broadcasts.

(See page 3- 8.)

28 ENT: Jumps to a channel after selecting with the 0–9 buttons.
29 INPUT: Select a TV input source.

(See page 2- 1.)

NOTE

When using the remote control unit,
point it at the TV.

>>

<<

Watching TV

ENG 2-1

Displaying an External Equipment Image

To view external source images, select the input source by pressing INPUT on the remote control
unit.

Example

1 Press INPUT.

The INPUT list screen displays.

2 Press

/ to select the input source.
An image from the selected source
automatically displays.

You can also select the input source by pressing INPUT.
Each time INPUT is pressed, the input source toggles.

>>

<<

Watching TV

ENG 2-2

Initial Installation

Perform the following steps before you press POWER on
the remote control unit.

1. Insert the batteries into the remote control unit.

2. Connect the antenna cable to the TV.

3. Plug in the AC cord to the AC outlet.

Language (Language setting)

Select from among 3 languages: English, French and
Spanish.

1 Press

/ to select the desired language listed on the

screen, and then press ENTER.

Location & Time

Make settings for the country, area and time zone where
you use the TV.

2 Press

/ to select "United States", "Canada" or

"Mexico", and then press ENTER.

3 Press / to select the time zone where you are using

the TV, and then press ENTER.

Example

The time zone differs depending on the selected
country.
The factory preset value is the time zone for the
capital of the selected country.

>>

<<

Watching TV

ENG 2-3

Initial Installation (Continue)

4 Press / to select the Daylight Savings Time, and then

press ENTER.

"Auto" is the default selection.

TV Location

Select "Home" or "Store" for the location where you plan to
install the TV. This product qualifies for ENERGY STAR in
Home mode default setting.

5 Press / to select "Home" or "Store".

Press ENTER to enter the setting.

Home: AV MODE is set to "STANDARD (ENERGY STAR)".
Store: AV MODE is set to "DYNAMIC (Fixed)". Picture

Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off".

If you select "On" and there is no operation for 30
minutes:

- AV MODE will be reset to "DYNAMIC (Fixed)".
When "Off" is selected:

- Even after 30 minutes elapses, AV MODE is not reset
to "DYNAMIC (Fixed)".

Feature Demo: When "On" is selected, after all the
settings are completed, the Feature Demo screen is
displayed if there is no operation for several minutes.

NOTE

ENERGY STAR qualification is based on AV MODE
"STANDARD (ENERGY STAR).

>>

<<

Watching TV

ENG 2-4

Initial Installation (Continue)

Antenna & Cable/STB

Select the type of connection you will use to watch TV.

6 Press

/ to select "Antenna & Cable" or "Set- top box",

and then press ENTER.

To watch TV via an antenna or cable connection
(without using a set-top box):

Select "Antenna & Cable", and then go to step 7.
To watch TV via a set- top box:

Select "Set-top box", and then press ENTER.
Check that the set- top box connected to the TV is on.

To watch TV, select the input source corresponding to
the terminal connected to the set- top box. When doing
so, you must make the setting to skip "TV". Press

/ to

select "On", and then press ENTER.

When this is set to "On", the channel on the TV cannot
be changed using the remote control unit or menu. (e.g.
CH

/ , Favorite CH, etc.)

See page 4-12 for details on the Input Skip function.

Press INPUT to select the input source corresponding to
the terminal connected to the set- top box. Make the
necessary settings on the connected external
equipment.

See the operation manual of the connected equipment
for setting up the equipment.

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".

7 Press

/ to select "Air" or "Cable".

Press ENTER to enter the setting.

>>

<<

Watching TV

ENG 2-5

Initial Installation (Continue)

CH Search (Channel search)

Channel auto search makes the TV look for all channels
viewable in the set area.

8 When "Air" is selected in Antenna setting:
Press

/ to select "Start", and then press ENTER.

When "Cable" is selected in Antenna setting:

Press

/ to select "Analog & Digital Search Start" to
search both analog and digital broadcasts, or to select
"Analog Search Start" to search only analog broadcasts,
and then press ENTER.

The Channel search will start automatically.
To exit the Channel search screen, select "Cancel", and

then press ENTER.

Smart TV

When you connect to the Internet on the TV, select the
desired connection method and follow the instructions
shown on the display.

Wireless LAN connection is possible only when the WPS
(push button) method is used. If any other method is
used, make settings by Smart TV > Internet Setup.

(See pages 7-2 to 7- 4.)

9 Press

/ to select "Yes", and then press ENTER.

10 Press / to select "Wired" or "Wireless", and then

press ENTER.

>>

<<

Watching TV

ENG 2-6

Initial Installation (Continue)

Connection using an ETHERNET cable:

Select "Wired" and press ENTER.
Confirm that the TV is properly connected with the

router, and then press "Next". Follow the instructions on
the display to perform the connection test.

Wireless LAN connection by the WPS method:

Select "Wireless" and press ENTER.
Follow the instructions on the display, and finalize the

connection after testing its viability.

NOTE

After you finish configuring the network settings,
configure the "TV Name Setting".

(See pages 4- 24, 7-3.)

When you change the network settings, refer to Smart
TV > Internet Setup.

(See pages 7-2 to 7- 4.)

Completed

11 The settings confirmation screen is displayed. Confirm

the information displayed on the screen, and then press

ENTER.

Examples of the settings confirmation screen
When "Antenna & Cable" was selected in step 6.

>>

<<

Watching TV

ENG 2-7

Initial Installation (Continue)

NOTE

If no channel is found, confirm the type of connection
made with your TV and try "Easy Setup" again.

(See page 4- 5.)

When "Set-top box" was selected in step 6.

Click "OK" to display the confirmation screen for input
source switching.

Show the input list: You can check the current

connection status of external equipment. Confirm which
input terminal is connected to the set -top box.

OK: Clicking "OK" will complete the Easy Setup

procedure.

This may not display correctly depending on the
connected equipment.
This is not displayed correctly when the connected
equipment is off.
To watch TV using a set- top box, press INPUT after
completing the initial settings, and select the input to
which the set- top box is connected.

NOTE

For changing the settings of the Initial Installation,
perform "Easy Setup" on the Initial Setup menu on

page 4-5.

>>

<<

Direct Button Operation

ENG 3-1

Changing Channels

You can change channels in several ways.

Method 1
Using CH

/ on the remote control unit.
Method 2
Using remote control buttons 0- 9, • (DOT).

Examples:
To select a 1 or 2-digit channel number (e. g., Channel

5):

Press 5

ENTER

To select a 3 -digit channel number (e. g., Channel

115):

Press 1

1 5 ENTER

To select a 4 -digit channel number (e. g., Channel

22.1):

Press 2

2 • (DOT) 1 ENTER

Method 3

Selecting the program from the Channel list.

1 Press INPUT on the remote control unit.

The INPUT list displays.

2 Press

/ to select "AIR" or "CABLE".

The Channel list displays.

3 Press

/ to select the desired channel, and then press

ENTER.

NOTE

When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
When you enter 0-9 only, channel selection will be made
if there is no operation within a few seconds.
If you push "0" by itself, nothing will happen.
Complete the above steps within a few seconds.
When you enter 0-9 and • (DOT), channel selection will
be made if there is no operation within a few seconds.

>>

<<

Direct Button Operation

ENG 3-2

Changing Volume

You can change the volume by pressing VOL+/- on the
remote control unit.

To increase the volume, press VOL +.
To decrease the volume, press VOL -.

Audio status

Output device

Output Select

Fixed Variable

Speaker

Variable sound Mute

When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below.

NOTE

See page 4-12 for details on the Output Select function.

>>

<<

Direct Button Operation

ENG 3-3

MUTE

Mutes the current sound output.
Press MUTE.

" " will be displayed on the screen for 30 minutes, and
the sound is silenced.

NOTE

Within 30 minutes of pressing MUTE, mute can be
canceled by pressing VOL+/- or MUTE.
Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound
as the volume level is set to 0 automatically.

>>

<<

Direct Button Operation

ENG 3-4

FREEZE

Allows you to capture and freeze a moving image that you
are watching.
Press FREEZE.

A moving image is captured.
Press FREEZE again to cancel the function.

NOTE

When this function is not available, "No displaying still
image available." will display.
The still image automatically goes out after 30 minutes.
If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
canceled and a V -CHIP BLOCK message will appear.

>>

<<

Direct Button Operation

ENG 3-5

FLASHBACK

Press FLASHBACK to switch to the previously tuned
channel or previous input mode.

Press FLASHBACK again to switch back to the
currently tuned channel.

NOTE

FLASHBACK will not work if no channel has been

changed after the TV is turned on.

>>

<<

Direct Button Operation

ENG 3-6

SMART

Allows you to directly activate various types of applications.

1 Press SMART to display the application window.

Press SMART again to switch back to the currently
tuned channel.

2 Press

/ to select the desired application, and then

press ENTER.

If " " is displayed, check the USB connection.

If " " or " " is displayed, check your TV’s
network settings and connection.

NOTE

See page 5-2, 7-7 to 7- 12 for details of viewable

applications.
When this function is not available, "Can not operate this
function now" will display.

>>

<<

Direct Button Operation

ENG 3-7

NETFLIX

Displays the Netflix screen.

Press NETFLIX.

NOTE

If you press the NETFLIX button when the TV is turned off,
the TV turns on and the NETFLIX screen is displayed.

To enjoy Netflix, you need to make:

—a broadband Internet connection

(See page 7- 1.)

—settings of Internet Setup

(See pages 7-2 to 7- 4.)

—adjustments for Netflix

(See page 7- 13.)

>>

<<

Direct Button Operation

ENG 3-8

AUDIO

MTS/SAP stereo mode

The TV has a feature that allows reception of sound other
than the main audio for the program. This feature is called
Multi- channel Television Sound (MTS). The TV with MTS can
receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP feature
allows a TV station to broadcast other information, which
could be audio in another language or something
completely different like weather information.

You can enjoy Hi- Fi stereo sound or SAP broadcasts
where available.

Stereo broadcasts: View programs like live sporting

events, shows and concerts in dynamic stereo sound.
SAP broadcasts: Receive TV broadcasts in either MAIN
or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)

If stereo sound is difficult to hear.

Obtain a clearer sound by manually switching to fixed

mono- sound mode.
You can change MTS as shown below to match the
television broadcast signal.
Press AUDIO to toggle between audio modes.

Examples: when receiving MTS and SAP

STEREO mode:

STEREO + SAP mode:

MAIN + SAP mode:

MONO mode: MONO

Digital broadcasting audio mode

The types of audio transmitted in a digital broadcast
include SURROUND as well as MONO and STEREO. In
addition, it is possible for multiple audio tracks to
accompany a single video track.
Press ENTER to toggle between audio modes.

Example: when receiving Digital broadcasting

NOTE

MTS only operates while in TV mode.
You can have the same settings by choosing "Change
Audio" on the menu items.

(See page 4- 25.)

>>

<<

Direct Button Operation

ENG 3-9

Sleep Timer

Allows you to set a time when the TV automatically switches
to standby.
Press SLEEP.

The remaining time displays when the sleep timer has

been set.

Each time you press SLEEP, the remaining time

switches as shown below.

When set, the time automatically starts counting down.

If you want to adjust the sleep timer, you can press

SLEEP twice then change the time setting.

When it is 5 minutes before the time expires, the

remaining time will start to keep appearing every minute.

NOTE

Select "Off" by pressing SLEEP to cancel the sleep timer.

The TV will enter standby when the remaining time

reaches 0.

>>

<<

Direct Button Operation

ENG 3-10

AV MODE

AV MODE gives you several viewing options to choose from
to best match the surrounding environment of the TV, which
can vary due to factors like room brightness, type of
program watched or the type of device connected.
You can use USER Mode to create customized settings for
each TV input. These settings will be automatically saved
on each input for convenience.
Press AV MODE. Current AV MODE displays.

Press AV MODE again before the mode displayed on

the screen disappears.

The mode changes as shown below:

>>

<<

Direct Button Operation

ENG 3-11

AV MODE (Continue)

STANDARD (ENERGY STAR): For a highly defined image

in a normal lighting.

MOVIE: For a movie.
PC: For PC.
USER: Allows the user to customize settings as desired.

You can set the mode for each input source.

DYNAMIC: For a clear-cut image emphasizing high

contrast, useful for sports viewing.

DYNAMIC (Fixed): Changes the image and sound

settings to the factory preset values. No adjustments are

allowed.

NOTE

You can select a different AV MODE item for each input
mode. (For example, select STANDARD (ENERGY
STAR) for TV input and DYNAMIC for COMPONENT.)
You can have the same settings by choosing "AV
MODE" on the menu items.

(See page 4- 17.)

>>

<<

Direct Button Operation

ENG 3-12

Closed Captions and Digital Closed
Captions

Your TV is equipped with an internal Closed Caption
decoder. It allows you to view conversations, narration and
sound effects as subtitles on your TV. Closed Captions are
available on some TV programs and on some VHS home
video tapes at the discretion of the program provider.
Digital Closed Caption service is a new caption service
available only on digital TV programs (also at the discretion
of the service provider). It is a more flexible system than the
original Closed Caption system, because it allows for a
variety of caption sizes and font styles. When the Digital
Closed Caption service is in use, it will be indicated by the
appearance of a 3-letter abbreviation that also indicates the
language of the Digital Closed Captions: ENG (English),
SPA (Spanish), FRA (French) or other language codes.
Not all programs and VHS videotapes offer closed
captions. Please look for the "

" symbol to ensure that
captions will be shown.
In the Closed Caption system, there can be more than one
caption service provided. Each is identified by its own
number. The "CC1" and "CC2" services display subtitles of
TV programs superimposed over the program’s picture.
In the Closed Caption system, the "Text1" or "Text2"
services display text that is unrelated to the program being
viewed (e.g., weather or news). These services are also
superimposed over the program currently being viewed.

1 Press CC.

This will present the Closed Caption information
display.

2 Press CC while the Closed Caption information is still on

the screen.

Press repeatedly until you select the desired closed
caption service.

Depending on the number of caption services in the
signal being received, you will see information such as
1/2 or 1/4 displayed.
1/2 means "the first of two services".

Example:

If a program has three services (Digital CC(ENG), CC1
and Text1), the closed caption display will toggle in this
sequence:

The CC button keeps a record of the last service
selected in its memory.
If the last closed caption mode (e.g. 1/3 ENG) you
selected is not available for the next program, or on
another channel, the closed caption service that is
available is automatically selected, and this service
appears in parentheses, e.g. "1/3(CC1)".
Closed Caption services that appear in parentheses will
not be stored in the CC button’s memory as your last
selected service. Only services that you have selected
with the CC button are stored.

>>

<<

Direct Button Operation

ENG 3-13

Closed Captions and Digital Closed
Captions (Continue)

Examples:

In a case where there are two closed caption services
provided (for instance, Digital CC(ENG) and CC1), and
Digital CC(ENG) is displayed as your current selection, if
Digital CC(ENG) is not broadcast for the next program, the
other closed caption service, CC1, will be displayed in
parentheses.
A closed caption service appears in parentheses because
the service you selected is not available and a different
service is displayed on your screen. "1/1(CC1)" is displayed
instead of "1/2/ENG".

NOTE

See page 4-26 for detailed closed caption settings.

When the program contains no closed caption, "--"
displays in the closed caption information.
If the language code, e.g. "ENG", is not found on Digital
TV programs, "--" will be shown.
Four kinds of closed caption service (CC1, CC2, Text1,
Text2) are potentially available, but a broadcast may
contain none or only some of these services at the
discretion of the program provider.
When a web page is displayed, Closed Captions are not
available.
You can have the same settings by choosing "Change
CC" on the menu items.

(See page 4- 25.)