Hereby, Sharp Telecommunications of Europe Ltd, declares that this
802SH is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
A copy of the original declaration of conformity can be found at the
following Internet address:
http://www.sharp-mobile.com
Introduction
Congratulations on your new 3G/UMTS 802SH phone.
Useful Functions and Services
Your phone offers you the following features:
• Video calls. You can talk while viewing each other on respective screens.
• A built-in digital camera for taking pictures and video clips.
• A message function for reading and creating SMS messages.
• MMS (Multimedia Messaging Services) for personalising your phone in various ways.
• A WAP browser for accessing information on the mobile Internet.
• Java™ applications. You can also download various applications from Vodafone via the
mobile Internet.
• A voice recorder function for recording and playing back voice clips.
• A Bluetooth
with certain d evices. You can transmit p ictures, sounds, and video clips to OBEX-enabled
phones.
• An infrared interface for data communication. You can transmit pictures, sounds, and
video clips to OBEX-enabled phones.
®
wireless technology interface for establishing contact and transmitting data
1
Introduction
• A schedule alarm for creating and sending schedule entries with alarm settings.
• Barcode scanner. With the built-in digital camera, you can read texts and barcodes, and
create QR codes.
• Playback of the downloaded sound and video clip files.
• SD memory card slot that expands connectivity with a PC using the memory card.
2
Introduction
About This User Guide
This user guide is carefully designed to help you learn about your phone’s features and
operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate permanent written records of all
important data. Data may be lost or altered in virtually any electronic memory product
under certain circumstances. Therefore, we assume no responsibility for data lost or
otherwise rendered unusable, whether as a result of improper use, repairs, defects,
battery replacement, use after the specified battery life has expired or any other cause.
• We assume no responsibility, directly or indirectly, for financial losses or claims from third
parties resulting from the use of this product and any of its functions, such as stolen credit
card numbers, the loss or alteration of stored data, etc.
• All company and/or product names are trademarks and/or registered trademarks of their
respective holders.
• Screen layout may differ from that illustrated in this user guide.
The information described in this user guide is subject to change without notice.
3
Introduction
• All the functions described in this user guide may not be supported by all networks.
• We assume no responsibility for downloaded contents, information, etc. from the
network.
• Occasionally, a few black or bright pixels may appear on the screen. Please note that this
will not have any impact on any of the features or on performance.
Copyright
According to copyright laws, the reproduction, alteration and use of material which is
protected by copyright (music, pictures, etc.) is only permitted for personal or private use. If
the user is not in possession of more extensive copyright or has not received the explicit
permission from the copyright owner to reproduce, alter or use a copy which has been made
or modified in this way, this is considered to be a violation of the copyright laws and gives
the copyright owner the right to claim for damages. For this reason, avoid the illegal use of
material which is protected by copyright.
Windows is a registered trademark of Microsoft Corporation in the United States and/or
other countries.
4
Powered by JBlend™ Copyright 1997-2004 Aplix
Corporation. All rights reserved.
JBlend and all JBlend-based trademarks and logos
are trademarks or registered trademarks of Aplix
Corporation in Japan and other countries.
Licensed by Inter Digital Technology Corporation under one or more of the
following United States Patents and/or their domestic or foreign
counterparts and other patents pending, including U.S. Patents:
4,675,863: 4,779,262: 4,785,450: 4,811,420: 5,228,056: 5,420,896:
5,799,010: 5,166,951: 5,179,571 & 5,345,467
®
®
/Micro3D Edition™
is a registered trademark of HI Corporation
5
Introduction
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional patents are pending
worldwide.
SD logo is a trademark.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sharp is under license. Other trademarks
and trade names are those of their respective owners.
Licensed by QUALCOMM Incorporated under one or more of the following
United States Patents and/or their counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
Introduction
7
Introduction
CP8 PATENT
8
Introduction
This product is licensed under the MPEG-4 Visual Patent Portfolio License for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or
(ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity
and/or was obtained from a licensed video provider. No license is granted or implied for any other use.
Additional information may be obtained from MPEG LA. See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent Portfolio License for encoding in compliance with
the MPEG-4 Systems Standard, except that an additional license and payment of royalties are necessary for
encoding in connection with (i) data stored or replicated in physical media which is paid for on a title by title
basis and/or (ii) data which is paid for on a title by title basis and is transmitted to an end user for permanent
storage and/or use. Such additional license may be obtained from MPEG LA, LLC. See http://www.mpegla.com
for additional details.
Index ..................................................................... 235
List of Menu Functions ......................................... 240
Your Phone
Please check the following carefully. Your phone should come complete with:
• 3G (UMTS)/GSM 900/1800/1900/GPRS phone
• Lithium Ion Battery
• Battery Cover
•AC Charger
• Stereo Headset
• Handsfree Microphone Unit
• CD-ROM
• SD Memory Card
13
Getting Started
1. Earpiece
2. Navigation Keys (Arrow Keys):
abcdMoves cursor to highlight a menu item, etc.
Up/Down arrow keys: Displays the Contacts List when pressed during stand-by.
Left arrow key: Displays the message inbox when pressed during
Right arrow key: Displays the monthly calendar when pressed during
3. Centre Key:Displays Main menu when pressed during stand-by, then
4. Left Soft Key:
A
5. Send/Redial Key:
D
6. Shortcut Key:
S
7. Voice Mail Key:
G
8. * /Shift Key:
P
14
stand-by.
stand-by.
executes a function highlighted.
Executes a function at the bottom left of the screen.
Press during stand-by to display the Messaging screen.
Makes or accepts calls, displays the All Calls screen in
stand-by mode.
Press to open the shortcut menu to access the desired
applications.
Press and hold to connect to the Voice mail centre
automatically. (Depending on the SIM card.)
Switches character case between four modes: Abc, ABC,
123 and abc on the text entry screen.
Press to enter P, ?, – or * in stand-by mode.
1
10
11
2
3
4
5
6
7
12
13
14
15
16
8
9
9. Microphone
10. Sub Camera (Internal Camera)
11. Display
12. Microphone (for the viewer style of the display)
13. Right Soft Key:
C
Executes the function at the bottom right of the screen.
Shortcut to “Vodafone live!” by opening the browser. Press
during stand-by.
14. End/Power Key:
Ends a call and turns power on/off.
F
15. Clear/Back Key:
U
16. Multimedia Key:
Clears the characters before the cursor, returns to the
previous screen, etc.
Opens the Media Player screen.
E
Getting Started
15
Getting Started
17. Keypad:
1 key: Shortcut to the Voice mail centre. (Depending on the SIM
2-9 keys:Press and hold during stand-by to display each speed dial
0 key:Press and hold to enter +.
18. #/Flash Light Key:
R
card.) Press and hold during stand-by.
phone number.
Switches symbol screens on the text entry screen.
Press and hold to switch languages on the text entry
screen.
Turns the flash/auxiliary light on or off in camera mode.
Press and hold during stand-by to switch Profiles settings
between the mode most recently activated and Silent
mode.
17
18
16
24
25
19
26
19. Camera (External Camera)
20
20. Built-in Aerial:Warning: Do not cover the top of the phone with your hand
21
22
21. Macro Switch:
(Close-up)
22. Mobile Light:Used as a flash or an auxiliary light in camera mode.
23. Battery Cover
23
24. Handsfree Microphone Connector
25. External Connector:Used to connect either the charger or a USB data cable.
26. Monaural Speaker
when in use as this may interfere with the performance of
the built-in aerial.
Switches between normal () and macro () position.
Getting Started
17
Getting Started
27. Infrared Port:Sends and receives data via infrared.
28. Memory Card Slot Cover
29. Small Light: Used as a battery charge indicator.
30. Side Keys (Side-Up/Side-Down/Camera/Cancel):
Side-Up/Side-Down:(These two keys work in reverse with the viewer position of
the display.)
Moves the highlight up or down.
Press during stand-by or during a call to increase or
decrease the earpiece volume.
Press in camera m ode to increase or decrease the zo oming
ratio.
Camera Key: Displays the Main menu when pressed during stand-by,
then executes a highlighted function. Press and hold to
activate the camera.
Press and hold to display the Options menu.
Press during an incoming call to answer the call.
Press during a call to display the Call options.
Press halfway to lock the focus in camera mode.
Press (and hold) to take a picture with the camera.
18
27
28
29
30
Getting Started
Cancel Key:Press to return to the previous screen.
Press and hold to reject an incoming call.
Press during an incoming call to send a busy tone to the
caller.
Press to end the call.
19
Getting Started
Inserting the SIM Card and the Battery
1. Slide off the battery cover ().
2. Slide the SIM card into the SIM holder.
3. Hold the battery so that the metal contacts of the battery are facing down, slide the
guides on the top of the battery into the battery slots , and then insert it .
4. Replace the battery cover.
Note
• Make sure that only 3V SIM cards are used.
• Make sure that the standard accessory battery (XN-1BT90) is used.
20
1
2
SIM card
4
3
Getting Started
1
Removing the SIM Card and the Battery
1. Ensure that the phone is turned off and that the charger and other accessories are
disconnected. Slide off the battery cover ().
2. Lift the battery using the protruding edge and remove the battery from the phone.
2
3
4
3. Hold down gently while sliding the SIM card out of the SIM holder ().
Battery Disposal
The device is battery-powered. In order to protect the environment, please read the
following points concerning battery disposal:
• Take the used battery to your local waste depot, dealer or customer service centre for
recycling.
• Do not expose the used battery to a naked flame, immerse in water or dispose with the
household waste.
21
Getting Started
Charging the Battery
You must charge the battery for at least 135 minutes before using your phone for the first
time.
Using the Charger
1. Open the cover of the external connector, connect the charger to the external socket
located at the bottom of the phone by pressing both sides indicated with arrows, and
connect to an AC outlet.
The small light turns red.
Standard charging time: Approx. 135 minutes
Note
• Charging time may vary depending on the state of the battery and other conditions. (See
“Battery” on page 223.)
Small light
22
Getting Started
To Disconnect the Charger
When charging is complete, the small light turns off.
1. Unplug the charger from the AC outlet, then unplug the charger connector from the
phone.
2. Close the cover.
Note
• Do not use any non-approved chargers as they may damage your phone and invalidate
any warranties, see “Battery” on page 223 for details.
• When the phone is charging, the small light turns on and the animated battery status
indicator () in the upper right of the screen blinks indicating the current status of the
battery.
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power for charging from the cigarette lighter
socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right of the display.
23
Getting Started
Low Battery during Use
When the battery is running low, an alarm will sound and “” is displayed on the display.
If you are using your phone and you hear the low battery alarm, attach your charger as soon
as possible. The phone may not be able to continue normal operation if you continue to use
it.
Battery IndicatorsCharge Level
Sufficiently charged
Charging recommended
Charging required
Empty
24
Getting Started
Inserting the Memory Card
1. Turn off the phone.
2. Open the memory card slot cover.
3. Insert the memory card all the way in.
4. Close the cover.
Note
• The miniSD memory card cannot be used with your phone.
• Make sure that the phone is turned off before inserting the memory card.
• Be sure to insert the card in the correct direction and orientation.
• The SD memory card has a write-protect switch that prevents you from deleting memory
contents by accident. If you slide the switch to the lock position, you cannot save or delete
files.
• Do not open the memory card cover while the memory card is being formatted or written
to. The card may be damaged beyond use.
• Keep all memory cards out of the reach of small children.
25
Getting Started
Tip
• You see the following indicators when the memory card is in use:
: Appears when the card is inserted.
: Appears when the card is inserted and locked.
: Appears when the card is damaged or unusable.
: Appears when the card is locked and damaged or unusable.
: Appears when the card is being written or read.
: Appears when the card is being formatted.
Removing the Memory Card
1. Open the memory card slot cover, remove the card, and close the cover.
Note
• Make sure that the phone is turned off before removing the memory card.
• Do not remove the memory card while the memory card is being formatted or written to.
Turning Your Phone On and Off
To turn the power on, press and hold F for approximately 2 seconds.
The stand-by screen is displayed.
26
Getting Started
To Enter the PIN Code
If activated you are asked to enter a PIN (Personal Identification Number) code and handset
lock code after turning on your phone.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press .
To turn the power off, press and hold F for approximately 2 seconds.
Note
• If your PIN code is entered incorrectly three times in a row, the SIM card is locked. See
“Enabling/Disabling the PIN Code” on page 191.
• If the clock settings have not been made, the date and time entry screen is displayed
(p. 180).
To Copy All Contacts List Entries from the SIM Card
When you insert the SIM card into your phone for the first time and start the Contacts List
application, you are asked whether you wish to copy Contacts List entries on the SIM card.
Follow the on-screen instructions, or you can do it later using the Contacts List menu as
follows:
→
“Contacts”
“Advanced” → “Copy All Entries”
1. Select “SIM to Handset”.
27
Getting Started
Keypad Lock
You can lock the keypad to prevent it from being pressed accidentally.
Locking the Keypad
1. Press and hold P during stand-by.
To unlock, press and hold P.
Tip
• Emergency numbers (112, etc.) can be entered and dialled regardless of the keypad lock.
28
Getting Started
Indi
Indicator area
12:00
Left soft
key
cator area
Centre key
01.01.05
Right soft
key
Display Indicators
1./: Strength of received signal/Service out of range
: 3G (UMTS)/GPRS
:GSM/GPRS
: Roaming outside network
2.:Offline mode [enabled]
3.:Data exchange with external device
4./:Connection to the server [established/communicating]