Sharp 770SH User manual

Introduction

Congratulations on your new 3G/UMTS 770SH phone.

About This User Guide

This user guide is carefully designed to help you learn about your phone’s features and operations quickly and effectively.

NOTICE

• We strongly recommend that you keep separate permanent written records of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances. Therefore, we assume no responsibility for data lost or otherwise rendered un usable, whether as a result of improper use, repairs, defects, battery replacement, use after the specified battery life has expired or any other cause.

• We assume no responsibility, directly or indirectly, for financial losses or claims from third parties resulting from the use of this product and any of its functions, such as stolen credit card numbers, the loss or alteration of stored data, etc.

• All company and/or product names are trademarks and/or registered trademarks of their respective holders.

• Screen layout may differ from that illustrated in this user guide. The information described in this user guide is subject to change without notice.

• All the functions described in this user guide may not be supported by all networks.

• We assume no responsibility for downloaded contents, information, etc. from the network.

• Occasionally, a few black or bright pixels may appear on the screen. Please note that this will not have any impact on any of the features or on performance.

According to copyright laws, the reproduction, alteration and use of material which is protected by copyright (music, pictures, etc.) is only permitted for personal or private use. If the user is not in possession of more extensive copyright or has not received the explicit permission from the copyright owner to reproduce, alter or use a copy which has been made or modified in this way, this is considered to be a violation of the copyright laws and gives the copyright owner the right to claim for damages. For this reason, avoid the illegal use of material which is protected by copyright.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Introduction 1

Powered by JBlend™ Copyright 1997-2005 Aplix Corporation. All rights reserved. JBlend and all JBlend-based trademarks and logos are trademarks or registered trademarks of Aplix Corporation in Japan and other countries.

Licensed by Inter Digital Technology Corporation under one or more of the following United States Patents and/or their domestic or foreign counterparts and other patents pending, including U.S. Patents: 4,675,863: 4,779,262: 4,785,450: 4,811,420: 5,228,056: 5,420,896: 5,799,010: 5,166,951: 5,179,571 & 5,345,467

T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat. Nos. KR201211B1 and KR226206B1; and additional patents are pending worldwide.

is a registered trademark of HI

/Micro3D Edition™

CP8 PATENT

2Introduction

microSD™ is a trademark of the SD Card Association.

Bluetooth is a trademark of the Bluetooth SIG, Inc.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sharp is under license. Other trademarks and trade names are those of their respective owners.

Licensed by QUALCOMM Incorporated under one or more of the following United States Patents and/or their counterparts in other nations ; 4,901,307 5,490,165 5,056,109 5,504,773 5,101,501 5,506,865 5,109,390 5,511,073 5,228,054 5,535,239 5,267,261 5,544,196 5,267,262 5,568,483 5,337,338 5,600,754 5,414,796 5,657,420 5,416,797 5,659,569 5,710,784 5,778,338

This product is licensed under the MPEG-4 Visual Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a licensed video provider. No license is granted or implied for any other use. Additional information may be obtained from MPEG LA. See http://www.mpegla.com.

This product is licensed under the MPEG-4 Systems Patent Portfolio License for encoding in compliance with the MPEG-4 Systems Standard, except that an additional license and payment of royalties are necessary for encoding in connection with (i) data stored or replicated in physical media which is paid for on a title by title basis and/or (ii) data which is paid for on a title by title basis and is transmitted to an end user for permanent storage and/or use. Such additional license may be obtained from MPEG LA, LLC. See http://www.mpegla.com for additional details.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

Useful Functions and Services

Your phone offers you the following features:

• Video calls. You can talk while viewing each other on respective screens.

• 3D and colour Java™ games. You can also download various games and applications from Vodafone live!.

• Thin Film Transistor (TFT) colour LCD main display with images that are clearer and easier to view.

• A built-in digital camera for taking pictures and video clips.

• A message function for reading and creating SMS messages.

• MMS (Multimedia Messaging Services) for sending picture, sound and video messages to brighten someone’s day.

• Email for sending up to 300 KB and receiving mail with attachments.

• A colour WAP browser for accessing information on Vodafone live!.

• Your own ringtones and ring video clips. You can use sound or video clip files as a ringtone or ring video clip.

• A music player that can play back MP3, MPEG-4 and 3GPP format sound files (supported codec of MPEG-4 or 3GPP are AMR, AAC, AAC+, and AAC+e).

• Playback of downloaded sound and video clip files.

• A voice recorder function for recording and playing back voice clips.

•A Bluetooth® wireless technology interface for establishing contact and transmitting data with certain devices. You can transmit pictures, sounds, and video clips to OBEX-enabled phones.

• A data synchronisation function for updating Contacts List entries on the Internet.

• A schedule alarm for creating and sending schedule entries with alarm settings.

• A microSD™ memory card slot that expands connectivity with a PC using the memory card.

Introduction 3

Introduction .................................................1

Your Phone ..................................................7

Optional Accessories ................................... 7

Getting Started ............................................ 8

Inserting the SIM Card and the Battery .... 12

Removing the SIM Card and the

Battery ....................................................... 13

Charging the Battery ................................. 14

Inserting/Removing the Memory Card ..... 15

Connecting the Handsfree Kit ................... 17

Turning Your Phone On and Off ............... 17

Keypad Lock ............................................. 18

Display Indicators (Main Display) ............ 19

Display Indicators (External Display) ....... 21

Navigating Functions ................................22

Voice Call/Video Call Functions ...............23

Making a Voice Call ................................. 23

Speed Dialling ........................................... 24

Redialling .................................................. 24

Answering a Voice Call ............................ 24

In Call Menu (Voice Call) ......................... 25

4 Contents

Making a Video Call .................................. 28

Answering a Video Call ............................29

In Call Menu (Video Call) .........................30

Entering Characters ..................................33

Changing the Input Language ....................34

Changing the Input Mode ..........................34

My Dictionary ............................................35

Using Templates ........................................ 35

Using the Menu ..........................................36

Main Menu ................................................36

Shortcut Keys ............................................ 36

Contacts List ..............................................37

Changing the Name Order .........................37

Changing the List Displayed .....................37

Selecting the Storage Memory .................. 38

Sorting the Contacts List Entries ............... 38

Saving an Unregistered Number ................38

Add New Contact ...................................... 38

Viewing My Contact Details .....................39

Copying Contacts List Entries between

SIM Card and Handset ..............................39

Finding a Name ..........................................39

Dialling from the Contacts List .................39

Editing Contacts List Entries .....................40

Assigning a Ringtone or a Ring Video Clip

to Each Entry .............................................40

Registering Birthday Item to Calendar ...... 41

Deleting Contacts List Entries ...................41

Manage Category .......................................41

Contact Groups ..........................................42

Memory Status ...........................................43

Speed Dial List ..........................................43

Sending a Contacts List Entry ...................44

Receiving a Contacts List Entry ................44

Sending a Voice Clip Message or Video Clip Message Using an Address from the

Contacts List ..............................................44

Synchronising Contacts List Entries with

those on the Internet ...................................45

Dialling a Service Phone Number .............46

Camera ....................................................... 47

Taking Pictures ..........................................47

Recording Video Clips ..............................48

Common Functions in the Photo and

Video Camera Modes ................................48

Functions in the Photo Camera Mode ........51

Functions in the Video Camera Mode .......53

Messaging ..................................................54

SMS ............................................................54

MMS ..........................................................54

Email ..........................................................54

Creating a New Message ............................55

Messaging Settings ....................................61

Vodafone live! ............................................65

Navigating a WAP Page ............................66

Music ..........................................................69

Music Player ..............................................69

My Items .....................................................72

Pictures .......................................................72

Music & Ringtones ....................................73

Videos ........................................................74

Themes .......................................................75

Other Documents .......................................75

Common Option Menus .............................76

Games & Applications ...............................80

Text Templates ...........................................80

Memory Status ...........................................80

Contents 5

Entertainment ............................................81

Games & Applications .............................. 81

Settings ...................................................... 84

Mobile TV ................................................. 86

Streaming .................................................. 86

Videos ........................................................ 87

Calendar ..................................................... 90

Organiser & Tools .....................................95

Alarms ....................................................... 95

Calculator .................................................. 96

Voice Recorder .......................................... 97

Stopwatch .................................................. 98

Tasks .......................................................... 99

World Clock ............................................ 101

Countdown Timer ................................... 101

E-Book .................................................... 102

Expenses Memo ...................................... 103

Phone Help .............................................. 103

SIM Application ....................................... 104

Settings ....................................................105

Phone Settings ......................................... 105

Connectivity ............................................ 119

Call Settings ............................................ 124

Network Settings ..................................... 130

6 Contents

Call Log .....................................................136

Call Timers ..............................................137

Data Counter ............................................137

Call Costs ................................................. 137

Connecting 770SH to Your PC ...............139

System Requirements .............................. 139

3G/GSM Modem .....................................139

Handset Manager ..................................... 140

Sync Manager ..........................................140

Software Installation ................................141

Software Support ..................................... 141

Troubleshooting ......................................142

Safety Precautions and

Conditions of Use ....................................144

CONDITIONS OF USE ..........................144

ENVIRONMENT ....................................149

PRECAUTIONS CONCERNING

VEHICLE USE ........................................149

SAR ......................................................... 150

FCC NOTICE .......................................... 151

Index .........................................................153

List of Menu Functions ...........................156

Your Phone

Please check the following carefully. Your phone should come complete with:

• 3G (UMTS)/GSM 900/1800/1900 GPRS phone

• Rechargeable Li-ion Battery

• AC Charger

• Stereo Hands-free Kit

•CD-ROM

• microSD™ Memory Card*

•User Guide

• Quick Start Guide * This item is not provided in some areas.

Optional Accessories

• Li-ion Spare Battery (XN-1BT77)

• Cigarette Lighter Charger (XN-1CL30)

• USB Data Cable (XN-1DC30)

• AC Charger (XN-1QC32)

• Handsfree Microphone Unit (XN-1HU90)

• Stereo Headset (XN-1HS90) The above accessories may not be available in all

regions. For details, please contact your dealer.

Your Phone 7

Getting Started

4 5

6 7

8 Getting Started

12 13

16 17 18

1. Earpiece/Speaker

2. Navigation Keys (Arrow Keys):

Moves cursor to highlight a menu item, etc.*

Up/Down arrow keys: a b

Displays Contacts List entries in standby. a and b indicate these keys in this manual.

Left arrow key:

Displays the “Create Message” screen in standby. c indicates this key in this manual.

Right arrow key:

Displays the monthly or weekly calendar in standby. d indicates this key in this manual.

3. Centre Key:

4. Left Soft Key:

Displays Main menu in standby, and executes functions.

Executes the function in the lower left of the screen. Displays Main menu in standby.*

5. Send/Redial Key:DMakes voice calls or

accepts calls, and displays the call logs in standby.

6. Video Telephony Key:

Makes video calls or accepts calls, and displays the video call screen in standby.

7. Voicemail Key:GPress and h old to connect to

the Voicemail centre. (Depending on the SIM card.)

8. * /Shift Key:

Switches character case between four modes: Abc, ABC, 123 and abc on the text entry screen. Press to enter P, ?, – or * in standby. Press and hold in standby to initiate keypad lock.

9. Main Display

10.Sub Camera (Internal Camera)

Getting Started 9

11.Right Soft Key:CExecutes th e function in the

lower right of the screen. Accesses “Vodafone live!” by opening the browser in standby.*

12.End/Power Key:FEnds a call and turns power

on/off.

13.Music Key:

14.Shortcut Key:

Displays Music menu in standby.

Opens the Shortcuts menu in standby.* The Shortcuts menu (p. 116) allows you to change the default standby assignment of the Navigation, Left and Right Soft and Shortcut Keys (2, 4, 11 and 14).

15.Keypad

10 Getting Started

16.#/Silent Key:

Displays symbol screen on the text entry screen. Press and hold to switch languages on the text entry screen. Press and hold in standby to switch Profiles settings between the mode most recently activated and Silent mode.

17.Microphone

18.Built-in Aerial: Warning: Do not cover the

lower part of the phone with your hand when in use as this may interfere with the performance of the built-in aerial.

19.Camera (External Camera)

20.Battery Cover

21.Handsfree Kit/Microphone Connector

22.External Display

23.External Connector:

Used to connect either the charger or a USB data cable.

24.Side Keys (V/W): Moves the highlight up or

down. Press in standby or during a call to increase or decrease the earpiece volume. Press during incoming call to mute the ringer or disable vibration mode (when active).

* Default standby assignment can be changed via the

Shortcuts menu. See “Shortcuts” on page 116.

Getting Started 11

Inserting the SIM Card and the Battery

1. Slide off the battery cover ( ).

3. Hold the battery so that the metal contacts of the

battery are facing down, slide the guides on the top of the battery into the battery slots , and then insert it .

2. Slide the SIM card into the SIM holder.

SIM card

12 Getting Started

4. Replace the battery cover.

Note

• Make sure that only 3V SIM cards are used.

• Make sure that the standard accessory battery is

used.

Removing the SIM Card and the Battery

1. Ensure that the phone is turned off and that the

charger and other accessories are disconnected. Slide off the battery cover.

2. Lift the battery using the protruding edge and

remove the battery from the phone.

3. Slide the SIM card out of the SIM holder.

4. Hold the battery so that the metal contacts are facing

down and slide them into the slots. Close the cover.

Battery Disposal

The device is battery-powered. In order to protect the environment, please read the following points concerning battery disposal:

• Take the used battery to your local waste depot, dealer or customer service centre for recycling.

• Do not expose the used battery to a naked flame, immerse in water or dispose with the household waste.

Getting Started 13

Charging the Battery

You must charge the battery for at least 150 minutes before using your phone for the first time.

Using the Charger

1. Open and rotate the cover of the external connector

halfway around, connect the charger to the external socket located on the side of the phone by pressing both sides indicated with arrows, and connect to an AC outlet.

When the phone is charging, the battery status icon ( ) displays the current status. Standard charging time: Approx. 150 minutes Charging temperature: 5°C – 35°C

Note

• Charging time may vary depending on the state of the

battery and other conditions. (See “Battery” on page 145.)

14 Getting Started

To Disconnect the Charger

When charging is complete, the battery indicator icon displays the full charge status.

1. Unplug the charger from the AC outlet, then unplug

the charger connector from the phone.

2. Close the cover.

Note

• Do not use any non-approved chargers as they may

damage your phone and invalidate any warranties, see “Battery” on page 145 for details.

To Charge Using the Cigarette Lighter Charger

The optional cigarette lighter charger supplies power for charging from the cigarette lighter socket of a car.

Battery Level Indicator

The current battery level is displayed in the upper right of the main display and the middle of the external display.

Low Battery during Use

When the battery is running low, an alarm will sound and “ ” is displayed on the main and external displays.

If you are using your phone and you hear the low battery alarm, attach your charger as soon as possible. The phone may not be able to continue normal operation if you continue to use it.

Battery Indicators Charge Level

Sufficiently charged

Charging recommended

Charging required

Empty

Inserting/Removing the Memory Card

Note

• Do not push or pull on the card holder excessively as it could break. The holder is thin and particularly fragile.

• Do not touch the metal terminals with your hands or metal objects.

• Make sure that the phone is turned off before inserting/removing the memory card.

• Be sure to insert the card in the correct direction and orientation.

• Keep all memory cards out of the reach of small children.

To Insert the Memory Card

1. Turn off the phone.

2. Slide off the battery cover.

Getting Started 15

3. Slide the card holder as shown below in

(OPEN ) and insert the memory card as shown in

to .

4. Close the cover.

Tip

• You see the following indicators when the memory

card is in use:

: Appears when the card is inserted. : Appears when the ca rd is damaged or unusable.

Make sure the card is properly inserted.

: Appears when the card is being written to or

read.

: Appears when the card is being formatted.

16 Getting Started

To Remove the Memory Card

1. Turn off the phone.

2. Slide off the battery cover.

3. While pressing down lightly on the cover, slide the

card holder as shown below in (OPEN ) and remove the memory card as shown in to .

4. Close the cover.

Connecting the Handsfree Kit

1. Open and rotate the connector cover halfway

around.

2. Connect the handsfree kit.

Turning Your Phone On and Off

To turn the power on or off, press and hold F for approximately 2 seconds.

To Enter the PIN Code

If the PIN (Personal Identification Number) code is enabled you are asked to enter the PIN code each time the phone is switched on. For details on setting the PIN code, see “Enabling/Disabling the PIN Code” on page 116.

1. Enter your PIN code.

The PIN code is 4 to 8 digits.

2. Press B.

Note

• If your PIN code is entered incorrectly three times in a row, the SIM card is locked. See “Enabling/ Disabling the PIN Code” on page 116.

• If the clock settings have not been entered, the date and time entry screen is displayed (p. 114).

Getting Started 17

To Copy All Contacts List Entries from the SIM Card

When you insert the SIM card into your phone for the first time and start the Contacts List application, you are asked whether you wish to copy Contacts List entries on the SIM card. Follow the on-screen instructions, or you can do it later using the Contacts List menu as follows:

→

“Contacts” Entries”

“Manage Contacts” → “Copy All

1. Select “From SIM to Handset”.

Keypad Lock

You can lock the keypad to prevent it from being pressed accidentally.

Locking the Keypad

1. Press and hold P in standby.

Unlocking the Keypad

1. Press and hold P in standby.

Tip

• Emergency numbers (112, etc.) can be entered and

dialled regardless of the keypad lock.

18 Getting Started

Display Indicators (Main Display)

Indicator area

Right soft keyCentre keyLeft soft key

1. / : Strength of received signal/Service out

of range

: 3G (UMTS)/GPRS / : GPRS enabled/GPRS

disabled

: Roaming outside network

2. : Flight mode

3. : Data exchange with external device

4. / : Connection to the server [established/

communicating]

5. / : Voice call [incoming/in progress]

6. / / : Video call communication mode

enabled [voice/video/voice and video]

7. / : Alerts [text message and multimedia

message/Email]

8. / / : Mailbox full [SIM card only/handset

only/both SIM card and handset]

9. : “Voice Calls” diverts set to “Always”

Getting Started 19

10. ////: Connection status [USB cable/Bluetooth wireless setting [enabled (in standby)/exchanging information/talking with the Bluetooth headset/Hide my phone]]

11. / / : Java™ application [executed (colour)/ suspended (grey)]/Music player

12. : Secure WAP page displayed

13.///: Silent/vibration setting [silent/ increasing volume/vibration enabled/ silent and vibration enabled]

14. / / : Speaker mode [speaker phone/speaker activated/microphone muted]

15. : Memory card inserted

16. : Battery level

17. : Daily alarm enabled

18. / : Schedule entry enabled [with/without reminder alarm]

19. : Outbox contains unsent messages [text message/multimedia/Email]

20 Getting Started

20. / / : WAP/OTA provisioning alerts [WAP alert/OTA provisioning alert/WAP and OTA provisioning alerts]

21. : Voicemail message alert

22. : “Show Secret Data” set to “On”

23. : Function Lock enabled

24. : Keypad Lock enabled

25.(No display)/////: Current profile [Normal/Meeting/ Activity/Car/Headset/Silent]

Display Indicators (External Display)

Status Indicators

1. / : Strength of received signal/Service out of range

2. : Battery level

3. : Missed call

4. : Voice call incoming

5. : Video call incoming

6. : Call in progress

7. / : Alerts [messages/OTA Provisioning]

8. : WAP Push service

9. : Alarm sounding or snooze activated

Getting Started 21

Navigating Functions

All applications are accessed from the Main menu. To open the Main menu, press the centre key B in standby.

To launch applications, you will need to highlight menu items, and make selections. To select a menu item (indicated in quotation marks), move the cursor using a, b, c and d, and press B to select.

In certain procedures, you will need to press one of the soft keys (indicated in square brackets), which are displayed in the lower left and right of the screen. Press the corresponding soft key (A or C).

To return to the previous screen, press the right soft key if it displays Back. To close the Main menu, press the right soft key if it displays Exit.

Each section in this user guide starts with a list of items you will need to select in order (indicated in italics) before performing the procedures shown. Select each item to reveal the next set of items that you have to choose from. Open subsection items after opening those listed in the main section.

Example:

→

“Contacts”

22 Navigating Functions

“Contacts List” → “Add New Contact”

Voice Call/Video Call Functions

Making a Voice Call

1. Enter the area code and the phone number you wish

to dial and press D to dial. If you enter the wrong number, press [Clear] to

delete the number to the left of the cursor.

Emergency Calls

1. Enter 112 (international emergency number) using

the keypad and press D to dial.

Note

• Emergency calls may not be able to be made on all

mobile phone networks when certain network services and/or phone features are in use. Contact your service provider for more information.

• This emergency number can normally be used to

make an emergency call in any country, with or without a SIM card inserted, if a 3G (UMTS)/GSM network is within range.

International Calls

1. Press and hold Q until a + (international dialling

prefix) sign is displayed.

2. Enter the country code, followed by the area code

(without the leading zero) and the phone number, and press D to dial.

Adding an Entered Phone Number to the Contacts List

1. After entering a phone number, press [Options] and

select “Save Number”. For details on creating a new entry, see “Add New

Contact” on page 38.

Showing or Hiding My Phone Number on the Display of the Called Party

1. After entering a phone number, press [Options],

select “Show My ID” or “Hide My ID” and press D to dial.

Voice Call/Video Call Functions 23

Speed Dialling

Up to 8 phone numbers from the Contacts List memory (Handset and SIM) can be assigned to speed dials. You can call the numbers using the digit keys (G to O). The phone number of the Voicemail centre is assigned to G.

For details on setting the speed dial list, see “Speed Dial List” on page 43.

1. To dial a number using the speed dial, press and

hold any of the digit keys (G to O). The phone number saved in the speed dial list is

dialled.

Redialling

You can redial numbers in the call log. Select from specific categories or “All Calls”. Specific categories contain up to 30 numbers and the “All Calls” list contains up to 90.

1. Press D in standby.

2. Select the category from “All Calls”, “Dialled

Numbers”, “Missed Calls” or “Received Calls”. To switch logs, press c or d.

24 Voice Call/Video Call Functions

3. Highlight the phone number you wish to call.

4. Press D to redial a voice call or S to redial a

video call.

Answering a Voice Call

When an incoming call is detected, the phone rings.

1. Press D, B or press [Options] and select “Answer”

to answer the call. Or press any key except F, [Options] or [Busy]

when the “Any Key Answer” function is enabled. Set the Any Key Answer function in the profile of each mode (p. 109).

Tip

• If you have subscribed to the Calling Line

Identification (CLI) service and the caller’s network sends the number, the caller’s number is displayed on the screen. If the caller’s name and number are saved in the Contacts List, the caller’s name is displayed on the screen.

• If the number is a restricted number, the display

shows “Withheld”.

• When you receive a call from the person whose

picture is registered in the Contacts List, the picture and name are displayed.

Rejecting an Incoming Call

1. Press F while the phone is ringing to reject a call

you do not wish to answer.

Letting the Caller Know You are Unavailable

1. Press [Busy] while the phone is ringing to send a

busy tone to the caller.

In Call Menu (Voice Call)

Your phone has additional functions available while a call is in progress.

Adjusting the Earpiece Volume

You can adjust the earpiece volume (and handsfree kit volume, if connected) to five levels.

1. Press V or W to display the Earpiece Volume screen.

2. Press V (or a/d) to increase th e volume of the call

or press W (or b/c) to decrease the volume.

3. Press B when the volume is set to the desired level.

Turning the Speaker On and Off

You can talk via the loudspeaker on the phone when it is on.

1. During a call, press [Options] and select

“Loudspeaker On”.

Putting a Call on Hold

This function allows you to manage two calls at the same time. If you wish to make another call while you are talking to someone, you can put the current call on hold to call someone else.

To Make Another Call during a Call

1. During a call, press [Options] and select “Hold”.

The current call is put on hold.

2. Press [Options] and select “Dial New Number”.

3. Enter the phone number you wish to make another

call to, then press D.

Tip

• You can also make another call by entering the phone

number during a call instead of step 1. The current call is automatically put on hold.

Voice Call/Video Call Functions 25

Accessing SMS/MMS Menu during a Call

1. During a call, press [Options] and select

“Messaging”. The following options are available: “Create

Message” to make an SMS and MMS, or “Inbox”, “Sent” or “Drafts” to access these folders. For details on SMS and MMS, see “SMS” and “MMS” on page 54.

Call Waiting

This service notifies you of another incoming call while you have a call in progress.

1. During a call, press [Options] and select “Hold &

Answer” to answer the second call. The first call is put on hold and you can now talk to

the second caller.

Note

• You need to set “Call Waiting” to “On” if you wish

to use the Call Waiting service (p. 130).

• Call Waiting service may not be available on all

networks. Contact your service provider for more information.

• If you do not wish to answer the second call, press

[Options] and select “Busy” in step 1. If “Reject” is selected, the log of the second call is saved as a missed call.

26 Voice Call/Video Call Functions

Conference Call

Conference call is a call with more than 2 participants. You may include up to 5 participants in a conference call.

To Make a Conference Call

You must have one active call and one held call.

1. During a call, press [Options] and select “Join All

Calls” to join the conference call.

2. Press F to end the conference call.

Note

• The conference call service may not be available on

all networks. Contact your service provider for more information.

• To end the call with all participants, press [Options]

and select “End All Calls”.

• To reject adding more participants to the current

party, press [Options] and select “Reject”, or you can send the busy tone by selecting “Busy”.

• You have more options for the Conference call after

selecting “Join All Calls” in step 1:

• To put all participants on hold, select “Hold All”.

• To put all participants except the current call on

hold, select “Private Conversation”.

To Add New Participants to the Conference Call

1. Press [Options] and select “Dial New Number”.

2. Enter the number you wish to include in the

conference call and press D to dial.

3. Press [Options] and select “Join All Calls” to join

the conference call. If you wish to add other participants, repeat steps 1

to 3.

To End the Call with a Conference Call Participant

1. During a conference call, highlight the person that

you wish to disconnect from the conference call.

2. Press [Options] and select “End This Call”.

To Have a Private Conversation with One of the Participants

If you wish to have a private conversation with one of the participants, you may select the participant from the conference list and put the other participants on hold.

1. During a conference call, select the person that you

wish to talk to.

2. Press [Options] and select “Private Conversation”.

3. Once you have finished the private conversation,

press [Options] and select “Join All Calls” to return to the conference call.

Muting the Microphone

1. During a call, press [Mute].

To use the microphone again, press [Unmute].

Voice Call/Video Call Functions 27

Making a Video Call

Note

• Video calls can only be made and received if both

parties have 3G capable phones and 3G coverage. See “Display Indicators (Main Display)” on page 19.

• Make sure that the battery is fully charged and the

signal is strong before using this function.

• Turn the loudspeaker on or use a handsfree kit so that

you can talk while looking at the video call screen on the main display.

28 Voice Call/Video Call Functions

Status Indicators

1. Sub screen for your image

2. Elapsed time

3. Main screen for the other party’s screen

4. Other party’s name or phone number

Making a Video Call

To Make a Video Call by Entering the Phone Number First

1. Enter the area code and the phone number you wish

to dial.

2. Press [Options] and select “Video Call” or press

S to dial. If you enter the wrong number, press [Clear] to

delete the number to the left of the cursor. When connected, the image of the called party is displayed in the upper part of the screen and yours in the lower left.

Tip

• If the called party’s phone is not video call enabled,

you can press F and enter the phone number again to make a voice call.

To Make a Video Call With the Video Telephony Key

1. Press S.

Your image is displayed in the upper part of the screen.

2. Enter the phone number or press [Options] and

select “Call Log”, “Contacts” or “Enter Number”.

3. Once the desired number has been selected, press

To Make a Video Call Using Speed Dial

1. Press S.

Your image is displayed in the upper part of the screen.

2. Press and hold any of the digit keys (G to O).

The phone number saved in the speed dial list is dialled. When connected, the image of the called party is displayed in the upper part of the screen and yours in the lower left.

Answering a Video Call

When an incoming call is detected, the phone rings.

1. Press D to answer the call with video or press

[Options] and select “Hide Picture” to answer with voice only.

Tip

• If you have subscribed to the Calling Line

Identification (CLI) service and the caller’s network sends the number, the caller’ s number is displayed on the screen. If the caller’s name and number are saved in the Contacts List, the caller’s name is displayed on the screen.

Rejecting an Incoming Call

1. Press F while the phone is ringing to reject a call

you do not wish to answer.

Letting the Caller Know You are Unavailable

1. Press [Busy] while the phone is ringing to send a

busy tone to the caller of an incoming call letting them know that you cannot answer the call.

Voice Call/Video Call Functions 29

In Call Menu (Video Call)

Muting the Microphone

1. During a video call, press [Mute].

To use the microphone again, press [Unmute].

Swapping Images

You can swap images between the main and sub screens.

1. During a video call, press [Options] and select

“Switch Images”.

Changing the Image of Yourself

1. During a video call, press [Options] and select

“Camera Picture”.

2. Select “Internal Camera”, “External Camera” or

“Alternative Image”. “Internal Camera”: The image through the sub

camera is displayed and sent to the party.

“External Camera”: The image through the

camera is displayed and sent to the party.

30 Voice Call/Video Call Functions

“Alternative Image”: The camera is turned off and

the image selected in “Alternative Image” of “Video Call Settings” is used.

Turning the Speaker On and Off

You can talk via the loudspeaker on the phone when it is on.

1. During a video call, press [Options] and select

“Loudspeaker On”.

Note

• In a high-noise environment, you may not be able to

continue a call, or make a clear call. We recommend that you use the handsfree kit.

• With this option, there may be interruption if you

increase the earpiece volume. We recommend that you decrease the earpiece volume or use the handsfree kit.

Video Call Settings

To Adjust the Quality of the Incoming or Outgoing Image

You can adjust the quality of the called party’s or caller’s image.

1. During a video call, press [Options] and select

“Video Call Settings”.

2. Select “Incoming Picture Quality” or “Outgoing

Picture Quality”.

3. Select “Normal”, “Quality Priority” or “Frame Rate

Priority”. “Normal”: The standard quality is used.

“Quality Priority”: The quality of the picture

Frame Rate Priority

“

takes precedence over the frame rate.

”: The frame rate takes

precedence over the quality.

To Turn the Backlight On or Off

You can turn on the backlight of your screen.

1. During a video call, press [Options] and select

“Video Call Settings”.

2. Select “Backlight”.

3. Select “Always On”, “Always Off” or “As Normal

Setting”. When “Always On” is selected, the backlight will

always be on during a video call. When “As Normal Setting” is selected, the backlight will time out depending on the Backlight setting (p. 113).

To Adjust the Video Exposure

1. During a video call, press [Options] and select

“Video Call Settings”.

2. Select “Exposure”.

3. Press a (Light) or b (Dark).

Voice Call/Video Call Functions 31

Mirror Image

During a video call, you can reverse your image on the sub screen.

1. During a video call, press [Options] and select

“Video Call Settings”.

2. Select “Mirror Image”.

3. Select “On” or “Off”.

To Change the Sub Camera Image to the Alternative Image

During a video call, you can switch the image shown to the caller between the sub camera image and an alternative image or display an image while putting a call on hold from the saved picture files.

1. During a video call, press [Options] and select

“Video Call Settings”.

2. Select “Alternative Image” or “Hold Guidance

Picture”.

3. Select “Preset Picture” or “My Pictures”.

32 Voice Call/Video Call Functions

Entering Characters

When entering characters to create Contacts List entries, text messages or multimedia messages, etc., press the corresponding keys.

In multi-tap input method, press each key until the desired character is displayed. For example, press H once for the letter A or twice for the letter B.

Table of Characters

Pressing each key scrolls characters in the following order. The order varies depending on the language selected.

English Mode

Key

G H

I J K L

Upper Case

Characters

. (full-stop), (comma) - (hyphen) ? ! ’ (apostrophe) @:1

ABC2 abc2 2

DEF3 def3 3

GHI4 ghi4 4

JKL5 jkl5 5

MNO6 mno6 6

Lower Case

Characters

Numeric

Key

M N O Q P

Upper Case

Characters

PQRS7 pqrs7 7

TUV8 tuv8 8

WXYZ9 wxyz9 9

(space) + = < > € £ $ ¥ % & 0 0

Switches character case between four modes: Abc, ABC, 123 and abc.

.,?!:;-+#∗ @' " ( )_&€£$ %/ ˜<>§= \ | ¥

¿¡^[ ]{ }¤ЕД Же дж а З Й и й м СсЦШцштЯЬь

ù ∆ΦΓ ΛΩΠΨΣΘ Ξ (space) ↵

Press and hold to enter 0 - 9 numbers.

Lower Case

Characters

: Press and hold to shift between

P R

multi-tap and T9 mode.

: Press and hold to display the Input

Language screen.

Entering Characters 33

Numeric

Changing the Input Language

1. On the text entry screen, press [Options] and select

“Input Language”.

2. Select the desired language.

Changing the Input Mode

T9 Text Input

T9 text input method is a shortcut to enter text easily and quickly.

1. On the text entry screen, press and hold P to enter

T9 mode.

2. Press [Options] and select “Input Mode”.

3. Select the input mode (Abc, ABC, 123, abc).

4. Press each key once for any letter you require on

that key. To enter the word “How”, press JLO.

5. If the word shown isn’t the one you want, press a

or b until you highlight the correct one.

6. Press B to select the word.

34 Entering Characters

Note

• If the correct word is not shown in step 5, enter the

correct word again after switching to the multi-tap input method.

Tip

• If you press Q instead of step 6, a space is inserted

next to the selected word.

Symbols and Punctuation

1. On the text entry screen, press [Options] and select

“Add Symbol”.

2. Select the desired symbol.

My Dictionary

You can create your own word list for T9 text input.

1. On the text entry screen in T9 mode, press [Options]

and select “My Dictionary”.

2. Select “Add New Word” and enter a new word.

Editing a Word in the List

1. On the text entry screen in T9 mode, press [Options]

and select “My Dictionary”.

2. Highlight the desired word.

3. Press [Options] and select “Edit”.

4. Modify the word.

Using Templates

You can use the phrases registered in Text Templates when entering characters.

For details on creating the text template, see “Adding Phrases to Text Templates” on page 80.

1. On the text entry screen, move the cursor to the

point you wish to insert the template.

2. Press [Options] and select “Advanced”.

3. Select “Insert Template”.

4. Select the desired text template.

Copying, Cutting and Pasting Text

1. On the text entry screen, press [Options] and select

“Advanced”.

2. Select “Copy” or “Cut”.

3. Move the cursor to the first letter to be copied or to

be cut, then press B.

4. Move the cursor to the last letter to highlight the

area, then press B.

5. Move the cursor to the point you wish to paste the

letters.

6. Press [Options] and select “Advanced”.

7. Select “Paste”.

Entering Characters 35

Using the Menu

Main Menu

1. Press B in standby.

The Main menu is displayed.

2. Press a, b, c or d to highlight the desired

menu, then press B to access the function. For details on the menu options, see “List of Menu

Functions” on page 156.

36 Using the Menu

Shortcut Keys

You can access menus by pressing B and digit keys for the corresponding number on the Main menu. For numbers 10 to 12, press B and P (10), Q (11) or R (12). See “List of Menu Functions” on page 156.

Shortcuts are listed in the headings of this user guide. Examples: To Access “Voice Message” Sub Menu

(M 5-1-2) Using Shortcut Keys Press B KGH. To Access “Phone Help” Sub Menu

(M 7-10) Using Shortcut Keys Press B MP.

Note

• The shortcut keys work for the first three menu levels

only.

Contacts List

You can store the phone numbers and Email addresses of your friends, family and colleagues in the Contacts List.

Your phone can store up to 500 entries. In a Contacts List, you can save the following items:

Items Saved in the Handset Memory

First Name up to 32 characters Last Name up to 32 characters Phone Number up to 3 phone numbers (up to 32

Email Address up to 3 Email addresses (up to

Category 16 categories Street & Number up to 64 characters City up to 64 characters State/Province up to 64 characters Postal Code up to 20 characters Country up to 32 characters Note up to 256 characters Birthday (date) Picture (file name)

(M 8-1)

digits each)

128 characters each)

Assign Tone/ Video

Secret (On or Off)

Items Saved in the SIM Memory (depending on the SIM card)

Name up to 32 characters Phone Number up to 32 digits

Changing the Name Order

“Contacts” → “Settings” → “Name Order”

For Voice Call: (file name)

For Video Call: (file name)

For New Message: (file name)

(M 8-8-1)

1. Select “First-Last Name” or “Last-First Name”.

Changing the List Displayed (M 8-8-2)

“Contacts” → “Settings” → “Contacts Location”

1. Select from “Handset”, “SIM” or “Both”.

If the selected location is different from the contact storage memory, a confirmation message is displayed.

Contacts List 37

Selecting the Storage Memory (M 8-8-3)

“Contacts” → “Settings” → “Save New Contact to”

1. Select from “Handset”, “SIM” or “Choose before

Saving”. If the selected location is different from the list

displayed, a confirmation message is displayed.

Tip

• “Choose before Saving” prompts you to choose the

memory every time you save a new entry.

Sorting the Contacts List Entries (M 8-8-4)

You can change the listing order of the Contacts List entries between by alphabetical order or by different categories.

→

“Contacts”

“Settings” → “Sort Contacts”

1. Select “By Alphabet” or “By Category”.

Saving an Unregistered Number (M 8-8-5)

After the call ends, you can have the confirmation screen asking you if you wish to register the number to the Contacts List.

→

“Contacts”

38 Contacts List

“Settings” → “Save Unregistered”

1. Select “Incoming Call” or “Outgoing Call”.

2. Select “On” or “Off”.

Add New Contact

You can choose either the phone or SIM card memory locations to store the new entry. For switching locations, see “Selecting the Storage Memory”.

The amount of phone numbers that you can store to the SIM card is dependent on its capacity. Contact your service provider for details.

→

“Contacts”

If you select the “Choose before Saving” option for the memory to be used, the selection is between “To Handset” and “To SIM”.

1. Select the field you wish to fill in, and enter the

relevant information.

2. Press [Save], when finished.

Tip

• To create an entry, at least one field must be filled

(“First Name”, “Last Name”, “Phone Number” or “Email Address” for the handset memory; “Name” or “Phone Number” for the SIM memory).

“Contacts List” → “Add New Contact”

Viewing My Contact Details

You can register and edit your own contact as with other Contacts List entries.

“Contacts”

→

“My Contact Details”

(M 8-5)

Copying Contacts List Entries between SIM Card and Handset (M 8-9-1)

“Contacts” → “Manage Contacts” → “Copy All Entries”

1. Select “From SIM to Handset” or “From Handset to

SIM”.

Note

• When you insert the SIM card into your phone for the

first time and start the Contacts List application, the confirmation screen is displayed automatically, asking you if you wish to copy or not. The number of Contacts List entries to be copied varies depending on the SIM capacity.

• If the memory space is not enough to save all entries,

you cannot complete copying.

Finding a Name

“Contacts” → “Contacts List”

1. Enter the first few letters of the name.

Search results are displayed in alphabetical order.

Tip

• You can select the Contacts location from

“Handset”, “SIM” or “Both” before searching.

Dialling from the Contacts List

“Contacts” → “Contacts List”

1. Highlight the desired entry and press D (voice call)

or S (video call).

Tip

• If more than one phone number is registered for the

entry, highlight the desired phone number after step 1 and press D (voice call) or S (video call).

• You can also dial from the details screen of the

Contacts List. On the details screen, select the desired phone number and press D (voice call) or S (video call).

Contacts List 39

Editing Contacts List Entries

“Contacts” → “Contacts List”

1. Highlight the entry you wish to edit.

2. Press [Options] and select “Edit”.

3. Modify the information.

4. Press [Save] when finished.

Adding a Thumbnail to Entries

“Contacts”

1. Highlight the desired entry.

2. Press [Options] and select “Edit”.

3. Select “Picture”.

4. Select “Assign Picture”.

5. Select the desired picture.

6. Press [Save] when finished.

Note

• If you delete a picture in the handset memory, the

corresponding thumbnail is also deleted.

• To store a picture right after it was taken, select

“Take Picture” in step 4.

40 Contacts List

→

“Contacts List”

Assigning a Ringtone or a Ring Video Clip to Each Entry

“Contacts” → “Contacts List”

1. Highlight the desired entry.

2. Press [Options] and select “Edit”.

3. Select “Assign Tone/Video”.

4. Select “For Voice Call”, “For Video Call” or “For

New Message”.

5. Select “Assign Tone” or “Assign Video”.

When selecting “Assign Video”, go to step 7.

6. Select “Preset Sounds” or “My Sounds”.

7. Select the desired tone or video clip.

For details on selecting a ringtone or a ring video clip, see “Assigning a Ringtone for an Incoming Call” on page 106 or “Assigning a Ring Video Clip for an Incoming Call” on page 107.

8. Press [Save] when finished.

Registering Birthday Item to Calendar

A birthday entered in a contacts list entry can be registered to the calendar.

→

“Contacts”

1. Highlight the desired entry.

2. Press [Options] and select “View”.

3. Press d to display the second tab.

4. Press b to highlight the birthday entry.

5. Press [Options] and select “Set Reminder”.

6. Press B.

Tip

• After registration, the data in Calendar can be

customised. For details on customising a schedule entry, see “To Change the Type of the Reminder Tone or Video” and etc. on page 91.

• If the Calendar memory is full, “Set Reminder” is not

displayed in step 5.

“Contacts List”

Deleting Contacts List Entries

Deleting All Contact Entries

“Contacts” Entries”

→

“Manage Contacts” → “Delete All

1. Select from “Handset Entries”, “SIM Entries” or

“Both Entries”.

2. Enter your handset code.

For details on the handset code, see “Changing the Handset Code” on page 118.

Deleting a Contact Entry

“Contacts”

→

“Contacts List”

1. Highlight the desired entry.

2. Press [Options] and select “Delete”.

Manage Category

Different ringtones can be set for each category. If you do not change a category ringtone, the ringtone assigned in the Profiles menu is used.

→

“Contacts”

1. Highlight the desired category.

2. Press [Options] and select “Assign Tone/Video”.

3. Select “For Voice Call”, “For Video Call” or “For

New Message”.

“Manage Category”

(M 8-9-3)

(M 8-3)

Contacts List 41

4. Select “Assign Tone” or “Assign Video”.

When selecting “Assign Video”, go to step 6.

5. Select “Preset Sounds” or “My Sounds”.

6. Select the desired tone or video clip.

For details on selecting a ringtone or a ring video clip, see “Assigning a Ringtone for an Incoming Call” on page 106 or “Assigning a Ring Video Clip for an Incoming Call” on page 107.

Editing the Category Name

You can edit category names to be assigned to the Contacts List entries.

→

“Contacts”

“Manage Category”

1. Highlight the desired category name.

2. Press [Options] and select “Edit Name”.

3. Modify the name.

42 Contacts List

Contact Groups

You can create a mailing list to send the same message to a group of recipients at once. Up to 5 groups can be registered.

Creating a New Mailing List

“Contacts” Group”

→

(M 8-6)

“Contact Groups” → “Add New

1. Enter the group name.

The new group name is displayed following the last group on the Group List screen.

Adding Recipients to a Group

Up to 20 recipients can be registered in each list.

→

“Contacts”

“Contact Groups”

1. Select the desired group name.

2. Select “Assign New Entry”.

3. Select the desired entry.

The detailed screen is displayed.

4. Select the desired phone number or Email address.

Tip

• If you modify the entry assigned in the group, you

need to re-assign it to the group. Highlight the entry, press [Options], then select “Re-assign Entry” in step 2.

• To remove an entry from the group, highlight the

entry, press [Options], then select “Remove Entry” in step 2.

• To remove a group, highlight a group name and

press [Options] and then select “Delete” in step 1.

Sending a Message Using a Mailing List

→

“Contacts”

“Contact Groups”

1. Highlight the desired group name.

2. Press [Options] and select “Create Message”.

3. Select the desired type of messaging.

For further procedures, see “Creating a New Message” on page 55.

Memory Status

This function helps you to check the memory used in the Contacts List.

“Contacts” Status”

→

(M 8-9-2)

“Manage Contacts” → “Memory

Speed Dial List

You can set a maximum of 8 phone numbers in the Speed Dial list (p. 24).

Setting Contacts List Entries in the Speed Dial List

→

“Contacts”

1. Select the desired entry.

2. Highlight the desired phone number.

3. Press [Options] and select “Add to Speed Dial”.

4. Select the desired location.

Tip

• The nine digit keys (G - O) correspond to Speed

Dial list numbers.

To Edit the Speed Dial List

“Contacts”

1. Highlight the entry you wish to edit.

2. Press [Options] and select “Re-Assign” (or

“Assign”).

“Contacts List”

→

“Speed Dial List”

(M 8-4)

Contacts List 43

Sending a Contacts List Entry

“Contacts” → “Contacts List”

1. Highlight the desired entry.

2. Press [Options] and select “Send Contact”.

3. Select “As Message” or “Via Bluetooth”.

For “As Message”

For details, see “MMS” on page 54.

For “Via Bluetooth”

For details, see “Bluetooth” on page 119.

Receiving a Contacts List Entry

When the phone receives a Contacts List entry, a confirmation message is displayed in standby.

1. Press [Yes].

The received entry is saved in the Contacts List. Press [No] to reject.

Tip

• For details on entering Bluetooth wireless settings,

see “Connectivity” on page 119.

44 Contacts List

Sending a Voice Clip Message or Video Clip Message Using an Address from the Contacts List

“Contacts” → “Contacts List”

1. Select the desired entry incl uding the phone number

or Email address you wish to use.

2. Highlight the desired phone number or Email

address.

3. Press [Options] and select “Create Message”.

4. Select “Voice Message” or “Video Message”.

For further procedures, see “Creating a New Message” on page 55.

Synchronising Contacts List Entries with those on the Internet

The data synchronisation functions are a network service which allow you to manage your Contacts List from the phone and also via the Internet. The data in the SIM card will not be synchronised. Subscribe to a synchronisation service by contacting your network service centre.

→

“Contacts”

There are three available synchronisation modes.

Note

• If there are no active synchronisation settings

(M 8-7-5), these modes will not be available.

Synchronising the Contacts List

1. Select “Sync Now!” to synchronise the Contacts

List on the phone with those on the Internet server. Full details of the rules for this method of

synchronisation can be obtained from your network service centre or via the Internet server web page.

“Synchronise”

(M 8-7)

(M 8-7-1)

Backing up the Contacts List

(M 8-7-2)

1. Select “Backup” to save your Contacts List to the

Internet server. This will overwrite any contacts data stored on the

server.

Restoring the Contacts List

(M 8-7-3)

1. Select “Restore” to retrieve the Contacts List on the

Internet server. This will overwrite all contacts data currently stored

in the phone (SIM contacts are not affected). You will be asked to verify the handset code before the Restore action is performed. If an incorrect code is entered, Restore will be terminated.

Viewing the Log

(M 8-7-4)

1. Select “View Log” to see the details of the last

synchronisation session.

Contacts List 45

Synchronisation Settings

“Contacts”

→

“Synchronise” → “Sync Settings”

(M 8-7-5)

1. Select the desired account or “Create New” to enter

the following settings. “Profile Name”: Synchronisation profile

“Server Name”: Server address “User ID”: User ID for authentication “Password”: Password for authentication “Proxy”: Selects Proxy setting for

“Contacts DB Name”: Contacts List database name

Note

• Synchronisation settings may have already been

entered in your phone depending on your service provider. You may have restrictions on viewing, deleting, copying or modifying the settings. Contact your service provider for details.

46 Contacts List

name (Unique name)

synchronisation.

on the server

Dialling a Service Phone Number (M 8-10)

Certain SIM cards contain service phone numbers that can be dialled. Contact your SIM card vendor for more information. On the Contacts screen, “Service Dialling No.” is displayed at the bottom of the list.

→

“Contacts”

1. Select the desired service phone number.

Tip

• If the SIM card contains only one service phone

number, you can dial it in step 1 by pressing B.

• If no service phone number is stored in the SIM card,

this menu is not displayed.

“Service Dialling No.”

Camera

Your phone has a b uilt-in digital ca mera that allows you to take pictures and record video clips wherever you are. This section starts with basic functions and operational procedures to take, save and send pictures and video clips, followed by common and unique functions to camera and video modes.

(M 4)

Taking Pictures

“Camera”

1. Press B to take the picture.

The shutter sounds and the still image of the taken picture is displayed.

2. Press [Save].

The taken picture is saved in My Items. To cancel, press [Cancel]. To send the taken picture, press B in step 2.

Note

• When the video camera is launched, press [Options]

and select “Go to Photo Camera”, or press c.

• When you try to send a picture that has too large a

file size, the picture size is resized for the message. The original sized picture is saved in My Items.

Camera 47

Recording Video Clips

You can record a video clip with your phone.

“Camera”

The preview is displayed on the screen. When in photo camera mode, press d to switch to

video camera mode.

1. Press B.

2. To stop recording, press B.

3. Select “Save”.

The video clip is saved in My Items. To view the preview before saving, select “Preview”. To send the video clip, select “Save and Send”. Then select the desired way you wish to send. For further procedures, see “Creating a New Message” on page 55.

Note

• You can only send video clips when “For Message”

is selected for the recording time. For details, see “Selecting the Recording Time” on page 53.

48 Camera

Common Functions in the Photo and Video Camera Modes

Using the Digital Zoom Function

To Adjust the Zooming Ratio

1. Press a or b.

Once the phone has returned to standby, the zoom settings return to default.

Adjusting the Exposure

“Camera”

1. Press a (Bright) or b (Dark).

Once the phone has returned to standby, the brightness settings return to default.

→

[Options] → “Exposure”

: (Bright → Normal → Dark)

Using the Self-Timer

Select the appropriate option.

“Camera” (Photo Camera Mode)

“Camera” Camera Mode)

→

[Options] → “Modes” → “Self-timer”

→

[Options] → “Self-timer” (Video

1. Select “On” or “Off”.

“ ” is displayed on the screen when you select “On”.

Switching between the Photo and Video Camera Modes

You can switch between the photo and video camera modes by pressing c or d.

Select the appropriate option.

→

“Camera” “Camera”

[Options] → “Go to Video Camera”

→

[Options] → “Go to Photo Camera”

Selecting the Picture or Video Quality

Select the appropriate option.

“Camera” “Camera”

→

[Options] → “Picture Quality”

→

[Options] → “Video Quality”

1. Select the desired picture or video quality.

:Super Fine :Fine :Normal

Note

• The better quality you select, the larger the file size

becomes.

Selecting the Storage Memory

Select the appropriate option.

→

“Camera” Pictures”

“Camera” Videos”

[Options] → “Settings” → “Save New

→

[Options] → “Settings” → “Save New

1. Select the desired location from “To Handset

Memory”, “To Memory Card” or “Choose bef. Saving”.

Note

• If you select “Choose bef. Saving”, select the desired

location every time you save.

Camera 49

Auto Save

You can set the phone to save pictures and video clips automatically.

→

“Camera”

[Options] → “Settings” → “Auto Save”

1. Select “On” or “Off”.

Selecting the Anti-flicker Mode

“Camera” flicker”

→

[Options] → “Settings” → “Anti-

1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.

Note

• Vertical stripes may occur on the picture due to the

light source. Change the anti-flicker mode to rectify.

Using the Help Function

→

“Camera”

50 Camera

[Options] → “Help”

Common Shortcut Keys

If multiple options exist, they switch each time you press each following key.

Photo Camera Video Camera

G Zoom Max/Min H Exposure I J Save New Pictures Save New Videos K Picture Size Picture Size L Microphone On/Off M Picture Quality Video Quality N Self-timer On/Off O Q Switches Viewfinder

between with and

without indicators

P Switches between internal and external cameras

Note

• The “Switches the display modes” option is available

in “Preview” before you save a video clip. See “Recording Video Clips” on page 48.

Switches the display

modes in the Preview

screen

Functions in the Photo Camera Mode

Selecting the Picture Size

You can select the size of pictures. All taken pictures are saved in the JPEG format.

→

“Camera”

1. Select the desired size.

(External Camera) 960 × 1280 dots/

(Internal Camera) 120 × 160 dots

Continuous Shoot

There are various modes for taking continuous shots.

“Camera” Shoot”

1. Select the desired mode.

The following continuous shoot modes are available: “Off”: The continuous shoots are

[Options] → “Picture Size”

768 × 1024 dots/480 × 640 dots/ 240 × 320 dots/120 × 160 dots

→

[Options] → “Modes” → “Continuous

cancelled.

“4 Pictures”/“9 Pictures” ( / ):

“Overlapped” ( ): Overlaps continuous

Note

• When you select “Manual” to take continuous

pictures, press B manually at the desired speed.

• When the Timer and Continuous Shoot functions are

simultaneously set, “ ” (for “4 Pictures”, for example) is displayed instead.

• You cannot use the Continuous Shoot function for

picture sizes larger than 480 Pictures” and “Overlapped” are not available for picture sizes larger than 240

Takes 4 or 9 pictures continuously. After selecting this mode, select from “Fast”, “Normal” or “Manual”.

pictures into one picture and makes an afterimage. After selecting this mode, select “Fast” or “Normal”.

640 dots. “9

320 dots.

Camera 51

Selecting a Frame

You can select the frame from preset patterns or My Pictures.

→

“Camera”

[Options] → “Modes” → “Add Frame”

1. Select “Preset Frames” or “My Pictures”.

2. Select the desired frame.

The selected frame is confirmed on the display.

3. Press B.

Note

• Images larger than 240 dots [W]

cannot be used.

Using the Full Screen

You can display the preview on the full screen without the soft key area and indicator area.

→

“Camera”

[Options] → “Settings”

320 dots [H]

1. Select “Full Viewfinder”.

To return to the normal viewfinder, select “Normal Viewfinder”.

52 Camera

Selecting the Shutter Sound

“Camera” Sound”

→

[Options] → “Settings” → “Shutter

1. Select the desired shutter sound from 3 preset

patterns. To playback the shutter sound, press [Play] in step

Note

• Continuous Shoot uses the specialised shutter sound

that cannot be changed using the above settings.

• The shutter sound remains active even when

“General Volume” (p. 106) is set to “Silent” to prevent unauthorised use.

Functions in the Video Camera Mode

Selecting the Recording Time

“Camera”

1. Select “For Message” or “Extended Video”.

Note

• If you select “For Message” for the recording time,

• “Save and Send” is not displayed after recording in

→

[Options] → “Record Time”

For Message ( ): Limits the size to send a

Extended Video ( ):Less than 30 minutes

the file size is limited depending on the service provider. T herefore, the quality is also limited for the setting.

the Extended Video mode.

message depending on service providers.

(depending on the memory).

Selecting the Picture Size

You can select the size of pictures.

→

“Camera”

[Options] → “Picture Size”

1. Select “Large(QCIF)” or “Small(SubQCIF)”.

Recording Video Clips with the Sound

To record a video clip with the sound, the microphone needs to be activated.

→

“Camera” “Microphone”

[Options] → “Settings” →

1. Select “On” or “Off”.

Note

• The microphone is already turned on in the default

setting. Select “Off” to record a video clip without the sound.

• The file size of a video clip can be reduced if the

sound is not recorded.

Video Encoding

→

“Camera” Encode”

[Options] → “Settings” → “Video

1. Select the appropriate format.

Camera 53

Messaging

Your phone allows you to send and receive text, multimedia and Email. It is compatible with most POP3 Email providers.

(M 5)

SMS

SMS allows you to send text messages up to 765 characters long. If you send a message of more than 160 characters, it is split into several segments.

MMS

With MMS, you can send picture, sound and video messages to brighten someone’s day. Messages of up to 300 KB with images, sound, or video clips can be sent and received.

Email

Email allows you to send messages of up to 300 KB.

Note

• Some MMS functions may not always be available depending on your network. Contact your service provider for more information.

• Maximum message size varies depending on the restrictions set by the service provider.

54 Messaging

1. Recipient field

2. Message field

3. Send

4. Picture, Sound, Video, Others

Creating a New Message

(SMS/MMS) “Messaging” (Email) “Messaging”

→

“Create Message” → “Message”

→

“Create Message” → “Email”

(M 5-1)

1. Select the recipient field.

2. Select the desired method to enter the recipient’s

details.

3. For MMS, enter or select the Email address or

phone number from the Contacts List. For SMS, enter or select a phone number. For Email, enter or select an Email address.

• To add multiple Email addresses or phone numbers, highlight the recipient field, press [Options], select “Edit Recipients”, then select “Add Contact”. Enter or select the Email address or phone number from the existing Contacts List.

• To change the recipient types, press [Options], select “Edit Recipients” and highlight the desired recipient. Press [Options] and select “Change to To”, “Change to Cc” or “Change to Bcc”.

• To add a subject, press [Options] and select “Add Subject”.

4. Place the cursor in the message field.

5. Enter the message.

6. Highlight “Send” in the lower left of the screen.

Press B and select “Send Message”. After the message is sent, the message is moved to

the Sent box.

Tip

• To send the same message to a group of recipients,

select “Select Group” in step 2, then select the desired group name. For details on creating a mailing list, see “Creating a New Mailing List” on page 42.

Messaging 55

To Add a Slide Show

1. In step 4 in “Creating a New Message” on page 55,

press [Options] and select “Add Slide”. If you wish to add more slides, select “Add Slide

After” or “Add Slide Before”.

2. Enter the message.

If you wish to set the duration of each slide, highlight the space between the slides. Press [Options] and select “Slide Duration”, then select the desired duration.

Tip

• You can create messages up to 300 KB. Each slide

can contain one picture and/or one sound file or video clip.

To Attach My Items Data

1. In step 6 in “Creating a New Message” on page 55,

highlight the “Picture”, “Sound” or “Video” indicator in the lower centre of the screen, and then press B.

2. Select “Saved Pictures”, “Saved Sounds” or “Saved

Videos”.

56 Messaging

3. Select the desired file.

If you wish to take new pictures, record sounds or video clips, select “Take Picture”, “Record Voice” or “Record Video”.

• When attaching JPEG files, select the appropriate resize option, as the maximum message size for sending varies depending on the service provider.

To Remove or Replace Attachments

1. In step 6 in “Creating a New Message” on page 55,

press [Options] and select the corresponding remove option for each attachment.

To Attach a Contacts List Entry

1. Perform steps 1 to 5 in “Creating a New Message”

on page 55.

2. Press a to highlight your message.

3. Press [Options] and select “Add Slide”.

4. Select “Add Slide After” or “Add Slide Before”.

5. Enter another message.

If you wish to set the duration of each slide, highlight the slide number. Press [Options] and select “Slide Duration”, then select the desired duration. Repeat steps 2 to 4 to add more slides.

To Attach a Schedule Entry

1. In step 6 in “Creating a New Message” on page 55,

highlight the “Others” indicator in the lower right of the screen. Press B and select “Attach Appointment”.

2. Select the desired day including a schedule entry

you wish to add.

3. Select the desired schedule entry.

Using the Sending Options

You can use the message sending options for each type of message.

1. Highlight “Send” in the lower left of the screen,

then press B and select “Messaging Settings”.

• “Read Report” (“On”, “Off”) (MMS): Confirms whether or not a report is sent notifying the sender that the message has been read.

• “Delivery Report” (“On”, “Off”) (SMS/MMS): Enables or disables Delivery Report when the message is successfully sent to the recipient.

• “Expiry Time” (“Maximum”, “30 minutes”, “1 hour”, “6 hours”, “1 day”, “1 week”) (SMS/ MMS): Sets Expiry Time for a message to be saved in the server.

• “Priority” (“High”, “Normal”, “Low”): Prioritises composed messages.

• “Delivery Time” (“No delay”, “30 minutes”, “1 hour”, “6 hours”, “1 day”, “1 week”) (SMS/ MMS): Sets the time the message is delivered after the Send key is pressed.

2. Highlight “Send” in the lower left of the screen.

Press B and select “Send Message”. After the message is sent, the message is moved to

the Sent box.

Messaging 57

Note

• The current message size displayed while you are

creating the message is an approximation.

• If a message cannot be sent for some reason, the

message stays in the Outbox and the “ ” is displayed in standby.

Tip

• To save the message without sending, press

[Options] and select “Save to Drafts” in step 4 in “Creating a New Message” on page 55.

• You can send the following items attached to

multimedia messages. Details are given in the following sections.

• My Items data

• Contacts List entry

• Schedule entry created by Calendar, etc.

• You can use the template option to help you compose

messages. For details on using this option, see “Using Templates” on page 35.

58 Messaging

Sending a Message in the Drafts Box

→

“Messaging”

“Drafts”

(M 5-3)

1. Select the desired tab, SMS/MMS or Email.

2. Press [Options] and select “Edit & Send”.

3. Modify the message, if necessary.

4. Highlight “Send” in the lower left of the screen.

Press B and select “Send Message”.

Sending a Voice Clip Message or Video Clip Message

You can record a new voice or video clip when creating a new message.

Select the appropriate option.

“Messaging” “Voice Message”

“Messaging” “Video Message”

(M 5-1-2) (M 5-1-3)

→

“Create Message” →

→

“Create Message” →

1. Press B to start recording.

2. Press B to stop recording.

3. Select “Accept” to attach to the new message.

The file is saved in the corresponding folder in My Items. For further procedures, see “Creating a New Message” on page 55.

Reading a Message

Messages you receive are saved in the Inbox.

“Messaging”

→

“Inbox”

1. Select the desired tab, SMS/MMS or Email.

2. Select the message you wish to view.

Storing the Phone Number of a Sender in the Contacts List

“Messaging”

→

“Inbox”

1. Highlight the message from which you wish to store

the phone number or Email address.

2. Press [Options] and select “Save Address”.

The new Contacts List entry screen including the phone number is displayed. For details on creating a new Contacts List entry, see “Add New Contact” on page 38.

Calling the Phone Number of a Sender Embedded in the Message

→

“Messaging”

“Inbox”

1. Highlight the messag e containing the phone number

you wish to dial.

2. Press [Options] and select “Call”.

Downloading a Single MMS

“Messaging”

→

“Inbox”

1. Highlight the message alert ( ) you wish to

download.

2. Press [Options] and select “Download”.

Tip

• You can download multiple messages at the same

time. See “Downloading Multiple MMS”.

Downloading Multiple MMS

→

“Messaging”

“Inbox”

1. Press [Options] and select “Advanced”.

2. Select “Multiple Select”.

3. Select the desired message alerts, press [Options]

and select “Select” or “Select All”.

4. Press [Options] and select “Download”.

The selected messages are downloaded at the same time.

Messaging 59

Replying to a Message or to All Addresses

“Messaging”

→

“Inbox”

1. Highlight the message the sender of which you wish

to reply to.

2. Press [Options] and select “Reply” (to sender only)

or “Reply All” (to all other recipients listed in the original To or Cc lists).

3. Select “Reply” or “Reply with History”.

4. Enter the message.

5. Highlight “Send” in the lower left of the screen.

Press B and select “Send Message”.

Forwarding a Message

“Messaging”

→

“Inbox”

1. Highlight the message you wish to forward.

2. Press [Options] and select “Forward”.

3. Perform steps 1 to 5 in “Creating a New Message”

on page 55.

60 Messaging

Sorting the Messages in the List

“Messaging”

→

“Inbox”

1. Press [Options] and select “Advanced”.

2. Select “Sort”.

3. Select the desired sort option.

Locking or Unlocking the Messages

“Messaging”

→

“Inbox”

1. Highlight the message you wish to lock or unlock.

2. Press [Options] and select “Advanced”.

3. Select “Lock” or “Unlock”.

Messaging Settings

General Settings

“Messaging” “General Settings”

→

“Messaging Settings” →

(M 5-9)

(M 5-9-1)

1. Select the item you wish to set up.

• “Home Download”: Controls the message download timing inside your network area.

“Always Download”: Downloads messages

“Always Defer”: Defers message download.

• “Roaming Download”: Controls the message download timing when roaming outside of your network.

“Always Download”: Downloads messages

“Always Defer”: Defers message download.

• “Delivery Report”: Enables or disables Delivery Report request.

immediately from the server.

• “Read Report”: Enables or disables Read Report request.

• “Expiry Time”: This indicates the number of days and hours for which a message you send may remain undelivered to the message recipient. During this period, the message service centre will continually try to deliver the message to the recipient.

• “Edit Signature”: Opens the screen to enter the signature.

• “Auto Delete”: Deletes the oldest message automatically, when the Inbox, Sent or Both (Inbox and Sent) is full.

• “Automatic Resend”: Tries to resend the failed SMS/MMS message up to two times (“On” or “Off” selection).

• “Message List View”: Switches the mailbox listing between “One-line View” and “Two-line View”.

Messaging 61

SMS Settings

“Messaging”

(M 5-9-2)

→

“Messaging Settings” →

“SMS Settings”

1. Select the item you wish to set up.

• “Message Centre”: Enter the message centre number.

If you wish to enter a country code for a message to an international number, press and hold Q until a + sign is displayed.

• “Message Format”: Select the message format to be used when creating a new message.

• “Reply Path”: Accepts or rejects the same reply path with the send path when receiving the reply message for your message.

62 Messaging

• “Optimisation”: When set “On” (default), double-byte characters such as European characters with an accent are converted into single-byte characters and sent.

When “Off”, double-byte characters are sent as displayed.

Please note that you may be charged double for double-byte characters sent in an SMS when Optimisation is set “Off”.

MMS Settings

“Messaging”

(M 5-9-3)

→

“Messaging Settings” →

“MMS Settings”

1. Select the item you wish to set up.

• “MMS Accounts”: Select the de sired account or select “Creat e New” to enter the following settings.

“Profile Name”: MMS profile name

(Unique name) “Proxy”: Proxy setting for MMS “Relay Server URL”: MMS relay server

• “Delivery Report Allow”: Confirms whether or not a report is sent notifying the sender when you receive a message.

• “Read Report Allow”: Enables or disables Read Report Allow when the recipient is required to inform the sender that the message has been read.

• “Slide Duration”: Sets the duration of the slide.

• “Max Message Size”: Sets the maximum message size for sending and disables sending MMS messages exceeding that size.

• “Creation Mode”: When set to “Free”, you can attach files of any format to the mail. When set to “Restricte d”, only certain formats and message sizes can be attached. The “Restricted” setting has priority over “Max Message Size”.

Messaging 63

Email Settings

“Messaging”

(M 5-9-4)

→

“Messaging Settings” →

“Email Settings”

1. Select the item you wish to set up.

• “Email Accounts”: Select the desired account or select “Create New” to enter the following settings.

“Account Name”: Email account name

(Unique name)

“POP3 Server”: Server name, user ID,

password and port number for POP3 server

“SMTP Server”: Server name, user ID,

password, port number for SMTP server and SMTP

Authentication “Access Point”: Access point for Email “Email Address”: Email address

• “Download Interval”: Sets the download interval.

• “Max Message Size”: Sets the maximum message size for sending and disables sending Email messages exceeding that size.

64 Messaging

Vodafone live!

Your phone is already configured to access Vodafone live! and the mobile internet*.

Vodafone live! is a whole world of information and entertainment on yo ur phone. It also offers exciting new ways to communicate with your friends and family.

Vodafone live! with 3G takes mobile media to a completely new level. It brings your mobile to life – you can download and listen to full music tracks, play 3D games plus loads more, so you are always up to date with what matters to you or have the latest ways to entertain yourself when you’re out and about! All this at a faster speed and in crystal-clear digital quality. You can even chat face to face when you’re miles apart with Video calling! This enhanced service is subject to having a 3G capable phone and being in an area where 3G is available.

* If you have problems getting connected, please

phone Vodafone Customer Support.

(M 2)

Main Menu

→

“Vodafone live!”

The Vodafone live! service page is displayed.

“Vodafone live!”

The URL entry screen is displayed, allowing you to jump to a site.

“Vodafone live!”

See page 66.

“Vodafone live!”

WAP Push alerts are displayed.

“Vodafone live!”

The saved screenshots are displayed.

“Vodafone live!”

The history of pages you have recently browsed is displayed.

“Vodafone live!”

See page 67.

“Vodafone live!”

→

“Enter URL”

→

“Bookmarks”

→

“Alert Inbox”

→

“Saved Page”

→

“Access History”

→

“Browser Settings”

Vodafone live! 65

Navigating a WAP Page

• a b c d:

Moves the highlight around in the screen.

• B: Executes the option di splayed in the lower

centre of the screen.

• A: Launches the browser option menu.

• C: Selects an action displayed in the lower

right of the screen. Used to access “Vodafone live!” by opening the browser.

• F (short press):

Exits the browser.

(press and hold):

Turns off the phone.

66 Vodafone live!

Editing Bookmarks

“Vodafone live!” → “Bookmarks”

(M 2-3)

1. Select the desired URL, and press [Options].

You can edit the list of Bookmarks by the following options: “Open”: Selects a bookmark. “Details”: Displays detailed

“Send Page”: Sends the URL address to

“New”: Creates new folders or

“Rename”: Renames bookmarks. “Edit URL”: Edits URL address of the

“Move”: Moves bookmarks to

“Delete”: Deletes bookmarks. “Delete All”: Deletes all bookmarks.

information of the WAP page.

recipients.

bookmarks.

bookmark.

another location.

Browser Settings

“Vodafone live!”

(M 2-7)

→

“Browser Settings”

“Font Size”: Sets the size of the browsing

font. “Scroll Step”: Sets the speed of scrolling. “Send Referrer”: Enables or disables the

notification of the referrer. “Cookies”: Adjusts the setting of

cookies. “Downloads”: Categorises downloading

data from the images/

sounds/objects. “Security”: Adjusts the security prompt

level. “WAP Push”: Sets whether you need

confirmation for push

message. “Download to”: Sets the download location.

The Browser Options

You can use various options of the WAP browser.

→

[Options]

“Select”: Selects a WAP page. “Home”: Goes to the homepage. “Bookmarks”: See page 66. “Mark Page”: Marks the selected WAP

page.

“Save This Link”: Downloads the linked WAP

page data.

“Save Items”: Saves items from WAP

pages.

“Enter URL”: Goes to the WAP page that

you enter the URL address of.

“Access History”: Shows the history where

you have browsed.

“Forward”: Goes to the next page of the

pages displayed.

“Reload Page”: Reloads the WAP page

again to get new information.

“Advanced”: Displays the advanced

menus.

“Exit”: Exits the browser.

Vodafone live! 67

The Advanced Options

→

[Options] → “Advanced”

“Saved Page”: The saved screenshots are

displayed.

“Save This Page”: Saves the WAP page as a

local file. “Send Page”: Sends the WAP page data. “Details”: Shows detailed information

of the WAP page. “Browser Data”: Edits the browser data. You

can clear the cache/cookies/

history. “Search This Page”: Searches for specific words

in the WAP page. “Copy Text”: Copies the text on the WAP

page. “Browser Settings”: Displays the Settings

menus. “Restart Browser”: Restarts the browser. “About”: Displays the browser

information.

68 Vodafone live!

Music

Music Player

Music Player supports MP3, MPEG-4 and 3GPP format sound files. While playing back sound files in the background, you can use other menus.

Adding a New Playlist

You can create your own playlist, storing and managing your favourite tracks and the order of tracks.

(M 3)

(M 3-2)

→

“My Music” → “Playlists”

1. Press [Options] and select “Add New Playlist”.

2. Enter the desired playlist name.

Note

• To delete the playlist, highlight the playlist and press

[Options]. Then select “Delete Playlist”.

• You can create up to 99 playlists.

Playing Back Sound Files

→

“My Music”

1. Select the item you wish to play back.

• “All Music”: All sound files are displayed.

• “Artists”: The names of all artists are displayed. When an artist is selected, all of his or her albums are displayed. When an album is selected, all of the sound files in the selected album are displayed.

• “Albums”: The names of all albums are displayed. When an album is selected, all of the sound files in the selected album are displayed.

• “Playlists”: All playlists are displayed. When any playlist is selected, all of the sound files in the selected playlist are displayed.

2. Select the desired sound file.

To pause playback, press B.

Note

• Select “My Music” to update the list of available

music tracks.

• You are asked whe ther or not to play sounds when the

Silent mode is activated.

• To play the last played file, select “Last Played

Music”. “Currently Playi ng” is displayed when a file is being played back.

Music 69

• When you receive a call, playback of the current file

is paused, and you can receive the call. After the call ends, the paused playback resumes automatically in the background.

Tip

• You can return to the Main menu screen while

playing back the file in the background.

• You can create your playlist by listing only the

desired files (p. 69).

• Sound files in both the handset and the memory card

are displayed in a single view.

• You can select the playback pattern in step 2. Press

[Options] and select “Playback Pattern”. “Normal”: Plays back all files in the selected

folder once and stops playback.

“Repeat”: Continues playback of selected file

in the selected folder.

“Repeat All”: Plays back all files in the selected

folder.

“Random”: Plays back file s in the selected folde r

at random.

70 Music

• You can control the Music Player by using the

following keys:

a/ b : Increases or decreases the volume. b (press and hold): Mutes. d: Jumps to the next file. c: Returns to the start of the current file. d (press and hold): Fast-forwards. c (press and hold): Rewinds. F: Plays back the file in the background.

Sorting Files

→

“My Music” → “All Music”

1. Press [Options] and select “Sort”.

2. Select “By Title”, “By Artist”, “By Album” or

“By Genre”. Sort results are displayed.

Adding a File to the Playlist

You can add files to a playlist by doing the following.

→

“My Music” → “All Music”

1. Highlight the file you wish to add to the playlist.

2. Press [Options] and select “Add to Playlist”.

The playlists are displayed. For details on adding a playlist, see “Adding a New Playlist” on page 69.

3. Select the desired folder.

The file highlighted in step 1 is saved. To delete files from the playlist, highlight the file in the playlist and press [Options]. Then select “Delete from Playlist”.

Note

• You can store up to 99 files in one playlist. However

the total number of files stored on your phone cannot exceed 350 files.

Downloading Music Files

→

“Browse Music Store”

The music file download site is displayed.

Note

• This service is not available with some service

providers. Please contact your service provider for more information.

(M 3-3)

Music 71

My Items

My Items contains several types of picture, sound and video clip data. Also included in My Items are frequently used text message phrases and WAP sites which you can use for downloading. You can also transmit picture, sound and video clip data via Bluetooth wireless technology to OBEX-enabled phones.

Pictures

Pictures that are taken by a digital camera or images that are downloaded from mobile Internet sites can be managed. You can register pictures in the following formats: JPEG, PNG, WBMP and GIF.

Viewing Pictures

“My Items”

(M 6)

(M 6-1)

→

“Pictures”

1. Press d to display the list from the memory card

and c to return to the handset memory.

2. Select the file you wish to view.

The selected picture is displayed.

Tip

• You can scroll through your pictures with P and R.

72 My Items

Using Images as Wallpaper

→

“My Items”

“Pictures”

1. Highlight the file you wish to use as wallpaper.

2. Press [Options] and select “Set as Wallpaper”.

Saving an Image to Contacts List Entries

You can use this option only for pictures saved in the handset memory.

→

“My Items”

“Pictures”

1. Highlight the file you wish to add to Contacts List.

2. Press [Options] and select “Add to Contact”.

To overwrite, select the data you wish to save. To save as a new entry, select “As New Contact”. For details on entering a name, see “Add New Contact” on page 38.

Editing Pictures

“My Items”

→

“Pictures”

1. Highlight the file you wish to edit.

2. Press [Options] and select “Picture Editor”.

3. Select the desired option.

Note

• “Picture Editor” may not be available depending on

the original picture and copyright issued.

Adjusting the Size

You can adjust the picture to an appropriate size depending on the scene.

→

“My Items”

“Pictures”

1. Highlight the file you wish to adjust the size of.

2. Press [Options] and select “Resize”.

3. Select the desired option.

Note

• “Resize” may not be available depending on the

original picture and copyright issued.

Tip

• For other option menus, see “Common Option

Menus” on page 76.

Downloading Picture Files

→

“My Items”

The picture file download site is displayed.

Music & Ringtones

The downloaded sound files and the AMR data recorded by Voice Recorder are managed in Music & Ringtones. The default ringtones are not contained within Music & Ringtones. Only the sound files that can be played back on the phone are stored in Music & Ringtones.

Playing Back Sound Files

“My Items”

“Pictures” → “More Pictures”

(M 6-2)

→

“Music & Ringtones”

1. Press d to display the list from the memory card

and c to return to the handset memory.

2. Select the file you wish to play back.

To stop playback, press [Back].

Note

• Playback may not be available for some sound files.

My Items 73

Using the Sound Files as a Ringtone

“My Items”

→

“Music & Ringtones”

1. Highlight the file you wish to use as a ringtone.

2. Press [Options] and select “Set as Ringtone”.

Tip

• For other option menus, see “Common Option Menus” on page 76.

Downloading Sound Files

→

“My Items” Sounds”

The sound file download site is displayed.

Videos

Video clips that are recorded by a video camera or downloaded from mobile Internet sites can be managed.

Playing Back Video Clip Files

“My Items”

“Music & Ringtones” → “More

(M 6-4)

→

“Videos”

1. Press d to display the list from the memory card

and c to return to the handset memory.

74 My Items

2. Select the file you wish to play back.

To pause playback, press B. To resume, press B again. To stop playback, press [Back].

Using a Video Clip as a Ring Video Clip

You can set your video clip to play back when the phone rings.

→

“My Items”

“Videos”

1. Highlight the desired video clip.

2. Press [Options] and select “Set as Ring Video”.

Tip

• For other option menus, see “Common Option

Menus” on page 76.

Downloading Video Clip Files

→

“My Items”

The video clip file download site is displayed.

“Videos” → “More Videos”

Themes

You can easily customise the display by using the theme files.

The theme files that are downloaded from mobile Internet sites can be managed.

Viewing Previews

“My Items”

(M 6-6)

→

“Themes”

1. Press d to display the list from the memory card

and c to return to the handset memory.

2. Highlight the theme file you wish to preview.

3. Press [Options] and select “Preview”.

The selected theme file is displayed.

Setting Theme

“My Items”

→

“Themes”

1. Select the desired theme file.

The selected theme file is set as the default theme.

Tip

• Even after a theme is set, you can set a wallpaper

regardless of the set theme. In this case, the other items follow the set theme.

• For other option menus, see “Common Option

Menus” on page 76.

Note

• If you set your original image as a wallpaper, the

screen asking you to choose “Use Current Wallpaper” or “Use Theme Wallpaper” is displayed after step 1.

Downloading Theme Files

→

“My Items”

The theme file download site is displayed.

Common Option Menus

Activating Files with Copyright Protection (DRM)

Some pictures, sound files, video clips and theme files have a digital copy protection program, which is called DRM (Digital Rights Management). You need to activate the digital licence permission to open the files. Files protected with DRM are displayed with .

Select the appropriate option.

→

“My Items” “My Items” “My Items” “My Items” “My Items”

1. Highlight the file you wish to activate.

2. Press [Options] and select “Activate”.

Note

• Some pictures with DRM may not open even when an attempt is made to activate it.

76 My Items

“Pictures”

→

“Music & Ringtones”

→

“Videos”

→

“Themes”

→

“Other Documents”

Sending My Items Data

Select the appropriate option.

For Files except Theme Files

→

“My Items” “My Items” “My Items” “My Items”

“Pictures”

→

“Music & Ringtones”

→

“Videos”

→

“Other Documents”

1. Highlight the desired file.

2. Press [Options] and select “Send”.

3. Select “As Message” or “Via Bluetooth”.

For Theme Files

When sending the theme files, you can do it via Bluetooth only.

→

“My Items”

“Themes”

1. Highlight the desired file.

2. Press [Options] and select “Send via Bluetooth”.

Tip

• For details on creating a message, see “Creating a

New Message” on page 55.

• For details on Bluetooth settings, see “Bluetooth” on

page 119.

Note

• Pictures/Sounds/Video clips protected by copyright

cannot be sent attached to a message, with the exception of Separate Delivery files.

• When pairing, you need to enter your passcode when

establishing contact with a Bluetooth wireless technology enabled device for the first time.

Receiving My Items Data

When the phone rece ives My Items data, a confirmation message is displayed in standby.

1. Press [Yes].

The received data is saved in the corresponding My Items folder.

Tip

• For details on Bluetooth wireless settings, see

“Connectivity” on page 119.

Using My Items Data

You can copy, move, sort, rename, and delete the saved My Items data.

Select the appropriate option.

→

“My Items” “My Items” “My Items” “My Items” “My Items”

“Pictures”

→

“Music & Ringtones”

→

“Videos”

→

“Themes”

→

“Other Documents”

1. Highlight the desired file.

2. Press [Options] and select “Advanced”.

My Items 77

3. Select the desired option.

“Move”: Moves files to another folder.

“Copy”: Copies files. Select the desired

“Create Folder”: Creates a new folder. “Multiple Select”:Selects multiple files. “Sort”: Sorts the files. Select the desired

Note

• When you select “Themes”, you can select “Move”, “Copy” and “Sort” only in step 3.

To Rename the File

Select the appropriate option.

“My Items” “My Items” “My Items” “My Items” “My Items”

Select the desired folder to move to.

folder to copy to.

files to sort.

→

“Pictures”

→

“Music & Ringtones”

→

“Videos”

→

“Themes”

→

“Other Documents”

1. Highlight the desired file.

2. Press [Options] and select “Rename”.

78 My Items

To Delete the File

“My Items” → “Pictures” “My Items” “My Items” “My Items” “My Items”

→

“Music & Ringtones”

→

“Videos”

→

“Themes”

→

“Other Documents”

1. Highlight the desired file.

2. Press [Options] and select “Delete”.

To See the My Items Details

Select the appropriate option.

→

“My Items” “My Items” “My Items” “My Items” “My Items”

“Pictures”

→

“Music & Ringtones”

→

“Videos”

→

“Themes”

→

“Other Documents”

1. Highlight the file you wish to view the details of.

2. Press [Options] and select “Details”.

Uploading My Items Data

You can upload your picture, sound or video clip files to the Media Album.

→

“My Items” “My Items” “My Items”

“Pictures”

→

“Music & Ringtones”

→

“Videos”

1. Highlight the file you wish to upload.

2. Press [Options] and select “Send”.

3. Select “To Media Album”.

Note

• Media Album is not available with some service

providers. Please contact your service provider for more information.

• Picture, sound and video clip files protected with a

Selecting Multiple Files

You can select more than one item from My Items for moving, copying and deleting.

Note

• The following procedure applies when the entries

other than any theme file or “More Pictures”/ “More Sounds”/“More Videos” are highlighted.

Select the appropriate option.

→

“My Items” “My Items” “My Items” “My Items”

“Pictures” → [Options]

→

“Music & Ringtones” → [Options]

→

“Videos” → [Options]

→

“Other Documents” → [Options]

1. Select “Advanced”.

2. Select “Multiple Select”.

3. Press B to check the desired file names.

4. Press [Options] and select the desired option.

Tip

• To remove the check, select the file again or select

“Unselect” in step 4.

• If you wish to select all files, select “Select All” in

step 4. To unselect all, select “Unselect All”.

My Items 79

Games & Applications

(M 6-3)

(M 6-5)

For details on Vodafone specific applications, see “Games & Applications” on page 81.

Text Templates

You can register up to 50 text templates for use in text messages and multimedia messages. A maximum of 256 characters can be used for a single text template.

Adding Phrases to Text Templates

“My Items” Template”

1. Enter the text and press B.

Editing Text Templates

“My Items”

1. Highlight the text template you wish to edit.

2. Press [Options] and select “Edit”.

To view the text template, press [Options] and select “View”. To delete the text template, press [Options] and select “Delete”.

3. Modify the text and press B.

80 My Items

→

(M 6-7)

“Text Templates” → “Add New

“Text Templates”

Sending Text Templates

“My Items”

→

“Text Templates”

1. Highlight the text template you wish to send.

2. Press [Options] and select “Send Template”.

Memory Status

This function helps you to check the memory status of the handset memory or memory card. Memory status covers the following.

Handset Memory: Applications, Pictures, Videos,

Memory Card: Pictures, Videos, Sounds,

“My Items”

→

(M 6-9)

Sounds, Themes, Others, Total and Free

Themes, Others, Total and Free

“Memory Status”

1. Select “Handset Memory” or “Memory Card”.

Entertainment

Games & Applications

Using Applications

Various kinds of Vodafone specific applications can be used on this phone. To use applications, download the applications via the mobile Internet. Some applications offer the ability to connect to a network either within a game or a network-based application.

Note

• Applications may be both localised (no connectivity)

and network-based (using the mobile Internet to update information/play games). The network may charge you more for using network-based applications. Please contact your service provider for more information.

(M 1)

(M 1-1)

Downloading Applications

→

“Entertainment” “Games”

“Entertainment” “Applications”

→

“Games & Applications” →

“More Games”

→

“Games & Applications” →

→

“More Applications”

1. Select the desired application.

Before downloading the application you are asked to confirm what you are about to receive. After checking the information on the confirmation screen, the application can be downloaded.

2. Press B to start downloading.

3. Press B when finished.

Note

• User authentication may be required before

downloading the application on some information screens.

Entertainment 81

Executing Applications

“Entertainment” “Games” or “Applications”

→

“Games & Applications” →

1. Select the title of the application you wish to

execute. The selected application is executed. When using

network connection type applications, connection to the network can be selected.

2. To end the application, press F and select “End”.

Setting as a Screensaver for the Main Display

“Entertainment” “Games” or “Applications”

→

“Games & Applications” →

1. Highlight the file you wish to use as a screensaver.

2. Press [Options] and select “Set as Screensaver”.

Setting Permission

You can set permission for selected Java™ applications.

→

“Entertainment” “Games” or “Applications”

“Games & Applications” →

1. Highlight the desired Java™ application.

2. Press [Options] and select “Permission”.

82 Entertainment

3. Select one of the following options:

“Phone Call”: Sets permission to make voice

calls.

“Network Access”: Sets permission to access the

network.

“Messaging”: Sets permission to perform

MMS and SMS messaging.

“Autorun”: Sets permission to perform the

Autorun function.

“Local Connection”: Sets permission to connect to

local devices.

“Read User Data”: Sets permission to read user

data, such as Contacts List entries, mailbox (Inbox) and My Items data.

“Write User Data”: Sets permission to write

entries in your phone, such as Contacts List entries, mailbox (Inbox) and My Items data.

“Use Multimedia”: Sets permission to use the

multimedia recording.

4. Select one of the following options:

“Session”: The confirmation message is

not displayed until you exit the application, while execution of the API of the specified function group is authorised.

“Ask Once”: The confirmation message is

displayed every time the API of the specified function group is executed.

“Blanket”: The confirmation message is

not displayed until the application is deleted or you change the settings, while execution of the API of the specified function group is authorised.

“No”: Execution of the API of the

specified function gro up is not authorised.

Note

• To clear all the permission settings, select “Reset” in

step 3.

• Some permissions are not available for some Java™

applications.

Viewing Application Information

You can check the information of Java™ applications.

→

“Entertainment” “Games” or “Applications”

“Games & Applications” →

1. Highlight the desired Java™ application.

2. Press [Options] and select “Information”.

Moving or Deleting an Application

You can move an application between Games folders and Application folders, and also delete applications in folders.

→

“Entertainment” “Games” or “Applications”

“Games & Applications” →

1. Highlight the desired Java™ application.

2. Press [Options] and select “Move” or “Delete”.

Entertainment 83

Settings

Application Volume

You can set the volume of the application such as the sound effect to one of the five levels or silent. When the profile is set to “Silent”, the “General Volume” setting (p. 106) has priority.

“Entertainment” “Settings”

(M 1-1-3)

→

“Games & Applications” →

→

“Application Volume”

1. Press a (or d) to increase the volume or press b

(or c) to decrease the volume and then press B.

Backlight

“Entertainment” “Settings” → “Backlight” → “Switch On/Off”

→

“Games & Applications” →

1. Select from “Always On”, “Always Off” or

“Normal Settings”. “Always On”: Lit while the application is

“Always Off”: Unlit while the application is

“Normal Settings”: Works with the main

84 Entertainment

operated.

operated even if a key is pressed.

backlight setting (p. 113).

To Set the Blinking Operation

This setting enables the backlight to be controlled by the application. If set to “Off”, the backlight cannot be turned on from the application.

→

“Entertainment” “Settings”

“Games & Applications” →

→

“Backlight” → “Blink”

1. Select “On” or “Off”.

Vibration

When the vibrator is set in the application, you can choose whether the operation is enabled or disabled.

→

“Entertainment” “Settings”

“Games & Applications” →

→

“Vibration”

1. Select “On” or “Off”.

Calls & Alarms

You can set the priority of incoming calls and alarms while an application is operating.

→

“Entertainment” “Settings”

“Games & Applications” →

→

“Calls & Alarms”

1. Select “Voice Call”, “Video Call”, “Incoming

Message” or “Alarm”.

2. Select the desired method.

• “Call Priority”, “Message Priority” or “Alarm

Priority”: The application is suspended automatically, and you can receive a call or a message, or the alarm will sound. After finishing the call or sending the message, or when the alarm ends, the suspend indicator ( ) is displayed letting you know there is a suspended application.

• “Call Notice”, “Message Notice” or “Alarm Notice”:

The marquee (character scrolls) is displayed on the first line of the screen while the application continues. If you press D, the application is suspended, and you can receive a call. After finishing the call or sending the message, the suspend indicator ( ) is displayed letting you know there is a suspended application.

Screensavers

You can download screensaver applications for the standby screen and set the time period for the screensaver to activate.

→

“Entertainment” “Settings”

“Games & Applications” →

→

“Screensavers” → “Switch On/Off”

1. Select “On” or “Off”.

To Set the Activation Time

“Entertainment” “Settings”

→

“Games & Applications” →

→

“Screensavers” → “Activation Time”

1. Enter the activation time in two digits using the

keypad.

To Set the Suspend Time

“Entertainment” “Settings”

→

“Games & Applications” →

→

“Screensavers” → “Suspend Time”

1. Set the desired time period from “after 15 min.” to

“after 6 hours”.

Entertainment 85

Default Settings

“Entertainment” “Settings”

→

“Games & Applications” →

→

“Set to Default”

1. Enter your handset code.

For details on the handset code, see “Changing the Handset Code” on page 118.

Clearing All Memory

“Entertainment” “Settings” → “Memory All Clear”

→

“Games & Applications” →

1. Enter your handset code.

For details on the handset code, see “Changing the Handset Code” on page 118.

Java™ Information

“Entertainment” “Java™ Information”

The information about the licences belonging to Java™ is displayed.

Mobile TV

You can connect to the Mobile TV service.

Note

• This service is not available with some service providers. Please contact your service provider for more information.

86 Entertainment

(M 1-1-4)

→

“Games & Applications” →

(M 1-2)

Streaming

You can play back video clip files while downloading them from the mobile network.

You can also register the address of the Web site as a bookmark.

“Entertainment”

(M 1-3)

→

“Streaming”

1. Select “Last Played Streaming”, “Enter URL”,

“Favourites” or “Access Log”. “Last Played Streaming”:

“Enter URL”: Enter the desired address of the

“Favourites”: The address of the Web site is

“Access Log”: Shows a log of the Web sites you

“Settings”: The backlight and display size

Shows the last streaming file.

Web site. The browser opens, starts downloading and plays back.

registered.

have accessed.

settings.

Videos

Playing Back Video Clip Files

“Entertainment”

(M 1-4)

→

(M 1-4-3)

“Videos” → “My Videos”

1. Select “Handset Memory” or “Memory Card”.

2. Select “All Videos” or the desired playlist.

3. Select the desired file.

To pause playback, press B. To stop playback, press [Back].

Tip

• You can control the Video Player by using the

following keys:

a/b: Increases or decreases the volume. b (press and hold): Mutes. d: Jumps to the next file. c: Returns to the start of the current file. d (press and hold): Fast-forwards. c (press and hold): Rewinds.

Searching a File to Be Played Back

→

“Entertainment”

“Videos” → “My Videos”

1. Select “Handset Memory” or “Memory Card”.

2. Select “All Videos” or the desired playlist.

3. Press [Options] and select “Search”.

4. Enter a few letters of the title.

Search results are displayed in alphabetical order and the matching file is highlighted.

Adding a File to the Playlist

You can add files to a playlist by doing the following.

→

“Entertainment”

“Videos” → “My Videos”

1. Select “Handset Memory” or “Memory Card”.

2. Select “All Videos” or the desired playlist.

3. Highlight the file you wish to add to the playlist.

4. Press [Options] and select “Add to Playlist”.

The playlists are displayed. For details on creating a playlist, see “Adding a New Playlist” on page 88.

5. Select the desired playlist.

The file highlighted in step 3 is saved. To delete files from the playlist, highlight the file in the playlist and press [Options]. Then select “Delete from Playlist”.

Entertainment 87

Adding a New Playlist

You can create a playlist and register desired files in it.

“Entertainment”

→

“Videos” → “My Videos”

1. Select “Handset Memory” or “Memory Card”.

2. Press [Options] and select “Add New Playlist”.

3. Enter the desired playlist name.

4. Press B.

Note

• To delete the playlist, highlight the playlist and press [Options]. Then select “Delete Playlist”.

Settings

You can select a play mode for “Playback Pattern”, “Backlight” and “Display Size” when playing back video clip files.

→

“Entertainment”

“Videos” → “My Videos”

1. Select “Handset Memory” or “Memory Card”.

2. Select “All Videos” or the desired playlist.

3. Select the file for which you wish to adjust the play

mode.

4. Press [Options] and select “Settings”.

5. Select from “Playback Pattern”, “Backlight” or

“Display Size”.

88 Entertainment

6. Select from the following:

• “Playback Pattern” “Normal”: Plays back all files in the

selected folder once and stops playback.

“Repeat”: Continues playback of

selected file in the selected folder.

“Repeat All”: Plays back all files in the

selected folder.

“Random”: Plays back files in the

selected folder at random.

•“Backlight” “Always On”: Lit while the file is played

back.

“Always Off”: Unlit while the file is played

back even if a key is pressed.

“Normal Settings”: Works with the main

backlight setting (p. 113).

•“Display Size” “Original Size”: Displays the file in its

original size.

“Enlarge”: Displays the file in an

enlarged size.

“Full Screen”: Displays the file on the full

screen.

Downloading Video Clip Files

“Entertainment”

→

“Videos” → “Get New Videos”

(M 1-4-2)

The video clip file download site is displayed.

Playing Back the Video Clip Files

To Play Back the Last File

“Entertainment”

→

(M 1-4-1)

“Videos” → “Last Played Video”

Entertainment 89

Calendar

Calendar allows you to easily schedule appointments or events at any given date or time.

These entries can also be sent via Bluetooth wireless technology to a PC to share the same schedules. When you exchange entries with other devices, the date and time displayed may be different to that of the original data depending on the data format of the receiving device.

90 Calendar

(M 11)

Creating a New Entry

“Calendar”

1. Select the desired day to which you want to add an

event.

2. Select “Add New Entry”.

3. Enter the subject.

4. Select the desired category.

5. Enter the start date and time.

6. Select the duration.

When selecting “Other”, enter the desired end date and time.

7. Select the reminder time.

When selecting “Other”, enter the desired reminder date and time.

8. Press [Save].

Note

• If the date and time settings have not been entered,

the date and time entry screen is displayed (p. 114).

• The reminder will not sound when “General

Volume” (p. 106) is set to “Silent”.

To Change the Type of the Reminder Tone or Video

1. On the New Entry screen, select “Reminder”.

2. Select “Assign Tone/Video”.

3. Select “Assign Tone” and then select “Preset

Sounds” or “My Sounds”, or select “Assign Video”.

4. Select the desired sound or video clip file.

For details on selecting a tone, see “Assigning a Ringtone for an Incoming Call” on page 106.

To Change the Duration of the Reminder Tone or Video

1. On the New Entry screen, select “Reminder”.

2. Select “Duration”.

3. Select the time period.

When you select “Other”, you can enter the desired time in two digits using the keypad.

To Change the Repeat Option of the Reminder

1. On the New Entry screen, select “Repeat”.

2. Select the desired repeat option.

To Enter the Location

1. On the New Entry screen, select “Location”.

2. Enter the location for the schedule entry.

To Enter the Description

1. On the New Entry screen, select “Description”.

2. Enter a memo for the schedule entry.

To Make the Entry Secret

1. On the New Entry screen, select “Secret”.

2. Select “On” to make the data secret or select “Off”

to leave it as it is.

Calendar 91

Viewing a Schedule Entry

“Calendar”

1. Select the day you wish to view.

2. Select the desired entry.

To Search by Date

1. In any view, press [Options] and select “Go to”.

2. Select “Today” to display today or “Enter Date” to

enter the desired date.

Tip

• In the monthly or weekly view, you can control the

view by using the following: Monthly view

P: Displays the previous month. R: Displays the next month. Q: Displays the weekly view. K: Moves the cursor to today. c/ d: Moves the cursor to left (the previous day)

or to right (the next day).

a/ b: Moves the cursor upward (last week) or

downward (next week).

92 Calendar

Weekly view

P: Displays the previous week. R: Displays the next week. Q: Displays the monthly view. K: Moves the cursor to today. c/d: Moves the cursor to left (the previous day)

or to right (the next day).

a/b: Moves the weekly view up or down (the

previous hour or next hour).

Setting a Holiday

In the weekly or monthly view, you can highlight a date or days of the week with seven colour options.

“Calendar”

For Date Colour

1. Highlight the day you wish to set.

2. Press [Options] and select “Set Holiday”.

3. Select “By Date” and then select the desired colour.

For Days of the Week Colour

1. Press [Options] and select “Set Holiday”.

2. Select “By Week” and then select days of the week

you wish to colour.

3. Select the desired colour.

Tip

• The selected date/days are also highlighted on the

calendar on the standby screen.

Note

• If the same date is set with both a date colour and

a day of the week colour, the date is highlighted in the date colour.

• Up to 100 days can be set for the highlights.

Finding a Schedule Entry

“Calendar”

1. In any view, press [Options] and select “Find”.

2. Enter a few letters of the subject.

Search results are displayed in time order.

Editing a Schedule Entry

“Calendar”

1. Select the day you wish to edit.

2. Highlight the entry you wish to edit, press

[Options], then select “Edit”.

3. Select the desired item and modify the entry.

4. Press [Save].

Deleting Schedule Entries

1. In any view, press [Options] and select “Delete”.

2. Select the desired option.

“This Appointment” (daily view):

Deletes the selected entry.

“All This Day”: Deletes all entries for the

selected day.

“All This Week” (weekly view):

Deletes all entries for the selected week.

“Up to Last Week” (weekly view):

Deletes all entries before the selected week.

“All This Month” (monthly view):

Deletes all entries for the selected month.

“Up to Last Month” (monthly view):

Deletes all entries before the selected month.

“All Appointments” (weekly and monthly view):

Deletes all entries in this application.

Calendar 93

Sending a Schedule Entry

“Calendar”

1. Select the day including schedule entries you wish

to send.

2. Highlight the entry you wish to send, press

[Options], then select “Send”.

3. Select “As Message” or “Via Bluetooth”.

For “Via Bluetooth”

For details, see “Bluetooth” on page 119.

Note

• When pairing, you need to enter your passcode when

establishing contact with a Bluetooth wireless technology enabled device for the first time.

Receiving a Schedule Entry

When the phone receives a schedule entry, a confirmation message is displayed in standby.

1. Press [Yes].

The received entry is saved in the Calendar. Press [No] to reject.

Tip

• For details on entering Bluetooth wireless settings,

see “Connectivity” on page 119.

94 Calendar

Viewing the Memory Status

1. In any view, press [Options] and select “Memory

Status”.

Organiser & Tools

Alarms

Setting the Alarms

The alarm function allows you to be alerted at a specified time.

Note that you need to set the current date and time before setting the alarm function if it has not been done already.

“Organiser & Tools”

(M 7-1)

→

Select the blank line (--:--) you wish to set an alarm to.

(M 7)

“Alarms”

2. Enter the desired time.

3. Press [Save].

To Change the Type of Repeat Options

1. On the Set Alarm screen, select “Repeat”.

2. Select from “Once Only”, “Every Day” or “Selected

Days”. “Once Only”: The alarm sounds once only.

“Every Day”: The alarm sounds every day at

“Selected Days”: The alarm sounds on the selected

the specified time.

day/days of the week at the specified time.

To Change the Type of Alarm Tone or Video Clip File

1. On the Set Alarm screen, select “Assign Tone/

Video”.

2. Select “Assign Tone” and then select “Preset

Sounds” or “My Sounds”, or select “Assign Video”.

3. Select the desired tone or video clip file.

For details on selecting a tone, see “Assigning a Ringtone for an Incoming Call” on page 106.

To Change the Snooze of the Alarm Tone

1. On the Set Alarm screen, select “Snooze”.

2. Select the desired snooze option.

To Change the Alarm Volume

1. On the Set Alarm screen, select “Alarm Volume”.

2. Press a (or d) to increase the volume or press b

(or c) to decrease the volume.

Note

• The alarm will not sound when “Alarm Volume” is

set to “Silent”. When the profile is set to “Silent”, the “General Volume” setting (p. 106) has priority.

Organiser & Tools 95

To Change the Vibration of Alarm Tone

1. On the Set Alarm screen, select “Vibration”.

2. Select “On”, “Link to Sound” or “Off”.

For details on selecting a vibration, see “Vibration” on page 109.

To Change the Duration of the Alarm Tone

1. On the Set Alarm screen, select “Duration”.

2. Select the desired duration.

Resetting an Alarm

“Organiser & Tools”

→

“Alarms”

1. Highlight the alarm you wish to reset.

2. Press [Options] and select “Reset Alarm”.

Resetting All Alarms

“Organiser & Tools”

→

“Alarms”

1. Select “Clear All”.

96 Organiser & Tools

Calculator

The calculator function performs the 4 arithmetic calculations using up to 12 digits.

“Organiser & Tools”

Key operations for calculation are as follows:

To enter a decimal point, press P. To clear the entered number or function, press [Clear]. To do the calculations, press B. To start a new calculation, press [Clear].

(M 7-2)

→

“Calculator”

Rate Conversion

You can also use the calculator as a currency calculator to convert from/to a home currency using a conversion rate that you enter.

To Set a Currency Conversion Rate

→

“Organiser & Tools” “Currency Converter”

“Calculator” → [Options] →

→

“Exchange Rate”

1. Select “Domestic” or “Foreign”.

2. Enter the currency conversion rate.

To Convert a Value

“Organiser & Tools”

→

“Calculator”

1. Enter the value to be converted.

2. Press [Options] and select “Currency Converter”.

3. Select “Convert to Domestic” or “Convert to

Foreign”.

Voice Recorder

This allows you to record a voice clip, which can be used to remind you of schedule entries or be sent within a multimedia message. The recorded voice clip is saved in My Items (Music & Ringtones). Voice clips are saved in .amr format.

Recording a Voice Clip

“Organiser & Tools”

(M 7-3)

→

“Voice Recorder”

1. Press B to start recording.

To stop recording before the recording time is over, press B.

2. Select “Save” to save the voice clip.

Note

• Press a (or V) or b (or W) to adjust the sound

volume when playing back the recorded file.

Sending Voice Clips

→

“Organiser & Tools”

“Voice Recorder”

1. Press B to start recording.

To stop recording before the recording time is over, press B.

2. Select “Save and Send”.

Organiser & Tools 97

3. Select “As Message” or “To Media Album”.

For details on creating a message, see “Creating a New Message” on page 55. (The Media Album service is not available with some service providers. Please contact your service provider for more information.)

Selecting the Record Time

→

“Organiser & Tools” [Options]

→

“Record Time”

“Voice Recorder” →

1. Select “For Message” or “Extended Voice”.

When selecting “Extended Voice”, voice clips are automatically saved to a memory card.

Selecting Storage Memory

“Organiser & Tools” [Options] → “Save New Sounds”

→

“Voice Recorder” →

1. Select the desired location.

When selecting “Choose bef. Saving”, you can select the location when saving a voice clip.

98 Organiser & Tools

Stopwatch

You can store 4 lap times when using the stopwatch function.

“Organiser & Tools”

(M 7-4)

→

“Stopwatch”

1. Press B to start.

Press [LAP] to view the lap time before the stopwatch stops. Last 4 lap times are saved.

2. Press B to stop.

Tip

• You can save a record of lap times and the stop time

by pressing [Options] and selecting “Save to Templates”.

Resetting Time

1. After stopping the stopwatch, press [Options] and

select “Reset”.

Tasks

(M 7-5)

You can register your schedule as task entries for a given date or time.

Creating a New Entry

→

“Organiser & Tools”

“Tasks”

1. Select “Add New Entry”.

2. Enter the subject.

3. Enter the due date and time.

4. Press [Save].

Note

• If the date and time settings have not been entered,

the date and time entry screen is displayed (p. 114).

To Select the Reminder Time

1. On the New Entry screen, select “Reminder”.

2. Select “Reminder Time”.

3. Select the reminder time.

When selecting “Other”, enter the desired reminder date and time.

To Change the Type of Alarm Tone or Video Clip File

1. On the New Entry screen, select “Reminder”.

2. Select “Assign Tone/Video”.

3. Select “Assign Tone” and then select “Preset

Sounds” or “My Sounds”, or select “Assign Video”.

4. Select the desired tone or video clip file.

For details on selecting a tone, see “Assigning a Ringtone for an Incoming Call” on page 106.

To Change the Duration of Alarm Tone or Video

1. On the New Entry screen, select “Reminder”.

2. Select “Duration”.

3. Select the desired duration.

To Change the Description

1. On the New Entry screen, select “Description”.

2. Enter a memo for the task entry.

To Make the Entry Secret

1. On the New Entry screen, select “Secret”.

2. Select “On” to make the data secret or select “Off”

to leave it as it is.

Organiser & Tools 99

Making the Entry Completed or Incomplete

“Organiser & Tools”

→

“Tasks”

1. Highlight the desired entry.

2. Press B.

3. On the view screen, press [Options] and select

“Check”. To make the entry incomplete, select “Uncheck”.

Finding a Task Entry

“Organiser & Tools”

→

“Tasks”

1. Press [Options] and select “Find”.

2. Enter a few letters of the subject.

Search results are displayed in time order.

100 Organiser & Tools

Sending a Task Entry

“Organiser & Tools”

→

“Tasks”

1. Highlight the task entry you wish to send.

2. Press [Options] and select “Send”.

3. Select “As Message” or “Via Bluetooth”.

For “Via Bluetooth”

For details, see “Bluetooth” on page 119.

Note

• When pairing, you need to enter your passcode when

establishing contact with a Bluetooth wireless technology enabled device for the first time.

Viewing the Memory Status

→

“Organiser & Tools”

“Tasks”

1. Press [Options] and select “Memory Status”.

Deleting Entries

“Organiser & Tools” “Delete”

→

“Tasks” → [Options] →

1. Select the desired option.

“This Task”: Deletes the selected entry. “All Completed Tasks”: Deletes all checked

“All Tasks”: Deletes all entries.

entries.

Sharp 770SH User manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Introduction

Contents

Your Phone

Optional Accessories

Getting Started

Inserting the SIM Card and the Battery

Removing the SIM Card and the Battery

Charging the Battery

Inserting/Removing the Memory Card

Connecting the Handsfree Kit

Turning Your Phone On and Off

Keypad Lock

Display Indicators (Main Display)

Display Indicators (External Display)

Navigating Functions

Voice Call/Video Call Functions

Making a Voice Call

Speed Dialling

Redialling

Answering a Voice Call

In Call Menu (Voice Call)

Making a Video Call

Answering a Video Call

In Call Menu (Video Call)

Entering Characters

Changing the Input Language

Changing the Input Mode

My Dictionary

Using Templates

Using the Menu

Main Menu

Shortcut Keys

Contacts List

Changing the Name Order

Add New Contact

Viewing My Contact Details

Finding a Name

Dialling from the Contacts List

Editing Contacts List Entries

Assigning a Ringtone or a Ring Video Clip to Each Entry

Registering Birthday Item to Calendar

Deleting Contacts List Entries

Manage Category

Contact Groups

Memory Status

Speed Dial List

Sending a Contacts List Entry

Receiving a Contacts List Entry

Sending a Voice Clip Message or Video Clip Message Using an Address from the Contacts List

Synchronising Contacts List Entries with those on the Internet

Camera

Taking Pictures

Recording Video Clips

Common Functions in the Photo and Video Camera Modes

Functions in the Photo Camera Mode

Functions in the Video Camera Mode

Messaging

Email

Creating a New Message

Messaging Settings

Vodafone live!

Navigating a WAP Page

Music

Music Player

My Items

Pictures

Music & Ringtones

Videos

Themes

Other Documents

Common Option Menus

Games & Applications

Text Templates

Memory Status

Entertainment

Games & Applications