SHARP 55UI7552K User Manual [nl]

Quick Start Set Up Guide

For information on using the TV’s features, please refer to the Operating Instructions.

Quick & easy guide for setting up your TV

What is included in the box

Using the remote control

Setting up the TV for the  rst time - including attaching the stand

Connecting other devices to the Television

Need help setting up or using your TV?

Please contact the UK & ROI Helpline*

Telephone UK 0330 024 0803 or ROI 01443 3323

Online support at: www.umc-uk.co.uk

Email support at: service@umc-uk.co.uk

*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your

phone provider.

Calls to the ROI number are charged at the local call rate.

The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.

Bank Holidays - 10am to 4pm

Closed Christmas and New Years day

Model Numbers

LC-55UI7252K

LC-55UI7352K

LC-55UI7552K

Trademark

Sharp

Model ID

LC-55UI7252K

LC-55UI7352K

LC-55UI7552K

Energy e ciency class A

Visible screen size (diagonal) 139 cm / 55 inches

On-mode power consumption 110.0 W

Annual energy consumption *1 161 kWh

Standby power consumption *2 <0.50 W

O mode power consumption

n/a

Screen resolution 3840 (H) x 2160 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4

hours per day for 365 days. The actual energy consumption will depend on how the television is used.

*2: When the TV is turned o with the remote control/standby button and no function is active.

Product  che

Additional Technical Information

LC-55UI7252K

LC-55UI7352K

LC-55UI7552K

RF 75 ohm Antenna / Analog / DVB / Satellite

Inputs 3 x HDMI2.0, 1 x USB3.0, 2 x USB2.0, 1 x SD card reader,

1 x RJ45 LAN/Ethernet, 1 x Mini -SCART, 1 x Mini Component/YPbPr,

1 x Mini AV IN - Composite Video/CVBS and L/R Audio shared for Composite Video and

Component/YPbPr.

Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone

Speaker*/ Ampli er Watts

(RMS)

2 x 10 / 2 x 8

Voltage and power

consumption

AC 220V ~ 240V; 50Hz

110/145/180W (home mode/standard/max)

(<0.5W in Standby)

Dimensions including stand

(mm)

1242W x 771H x 230D

Net weight (Kgs) 15.7

Wall Mounting VESA 600 x 300 (mm)

*Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).

Harman / Kardon

Harman Kardon is trademark of HARMAN International Industries, Incorporated, registered in the United

States and/or other countries.

Win a

Soundbar

www.registertoday.co.uk/sharp and enter into a prize draw to

Terms and conditions apply. Online registration only.

and

enter

into

prize

draw

Technical Speci cation

Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are

unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your

item in the event of warranty/service repair is in it’s original box/packaging.

REMOTE CONTROL

GUIDE

VOL

SOURCE

SOUND

PICTURE

ON/OFF MUTE

TE X

S UBTITLE

INFO

BACK

FA V

NET+

GOTO

DVD SETUP

DVD MEN

A-B

REPEAT

RE C LIS

PVR/MEDIA

EXIT

E NU

ON/OFF - Switch on the TV when in standby or vice versa.

MUTE - Mute the sound or vice versa.

NUMBER BUTTONS - 0–9 to select a TV channel directly.

TV GUIDE - Opens the 7 day TV guide (digital TV mode).

- To return to the previous channel viewed.

VOL (+/-) - To increase/decrease the sound level.

PICTURE - Scrolls through picture mode options.

SOUND- Scrolls through sound mode options.

SOURCE - To display the input/source menu.

CH (+/-) - To increase or decrease the channel being watched.

MENU - To display OSD menu.

EXIT - To exit all menus.

- Allows you to navigate the on-screen menus and adjust

the system settings to your preference.

BACK - To go back a previous step.

FAV - To display favourites menu.

INFO - Press once for now/next channel information.

- Press twice for information about the current programme.

TEXT - To enter/exit Text.

SUBTITLE - To switch the dialogue at the bottom of the screen (on/off).

TV - To switch to Digital Channels.

YOUTUBE - Access the Youtube App.

NETFLIX - Access the Netﬂ ix App.

NET+ - Access the Aquos NET+ Smart Portal.

RECORD/DVD MENU - Access the USB record function/Access the

DVD menu of the DVD inserted (must be set to the DVD source).

REC LIST/DVD SETUP - Opens the list of previously recorded items/Access

the TV’s DVD setup menu (must be set to the DVD source).

GOTO - To go to a speciﬁ c chapter.

A-B - Press once to set point, press a second time to return to point.

ANGLE/3D - Select different angle of DVD.

REPEAT - To repeat playback.

Key

For models with integrated DVD players.

For models with PVR Function.

For models with USB Playback.

For models with 3D functions.

- To

re s

a rt

t h e c u rrent

c h a p te

- To

a d va

n ce

forward

to t

h e n

ex t

c h a p te

To s

to p t

h e p l

ay b

a c k / E j

e ct

D i

s c

(To

EJ E

C T t

h e d i

s c

p re

s s / h o l

d t

h e

u t

to n fo r

4 s

e c o n d s )

- T o

p l

ay i

n f

a s t re

w i

n d

m o

d e

- To

p l

ay i

n f

a s t forwar

d m o

d e

- To

p l

ay /

p a u s

Sky Remote Code

If you wish to use your Sky remote to operate the TV’s basic

functions, you will need a Sky remote control (Revision 9 or later) and

you will need to program it with the code 2134. If you wish to use

your Sky Q remote to operate the TV’s basic functions, you will need

to program it with the code 4170.

To receive Freeview channels, in particular Freeview HD channels, you will need a Digital TV

aerial and be in a good Freeview coverage area. You can check coverage for your postcode at

www.freeview.co.uk.

Please note that any Freeview HD channels found during tuning will be placed in channel

positions above 100. For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.

Re-packing the Television

If you need help setting up your TV or you require any technical support, in the  rst instance please

contact the helpline.

In the unlikely event you need to return the product to the store/retailer from where it was purchased or

you need warranty/service support, please ensure you package the item adequately in order that it does

not get damaged.

The best way to package it is in the original box.

Please take the following steps:

1) Remove the stand/feet from the TV.

2) Put all of the accessories that came with the TV in the box ensuring they are placed at the back of the

TV. (not near the screen/panel side) Note: In the event of warranty/service support, you do not need to

send the accessories/stand/feet.

3) Ensure the power cable / plug is located at the back of the TV (not on the screen/panel side)

4) Never put anything in the box on the screen/panel side of the TV as it’s likely to damage it.

1. 2.

1. Plug

2. Accessories pack

TV Panel/Screen

Both the plug and accessories pack must be

placed at the rear of the TV.

Rear of TV

USB Memory sticks for recording from Freeview TV

Your TV has a built in Personal Video Recording function, meaning you can set

up recordings from the TV guide directly onto a PVR ready USB memory stick.

You can also pause live TV and rewind/fast forward through your recordings.

See our great range of tested and compatible PVR ready USB memory sticks at

www.umc-uk.co.uk/usb

SHA/QSW/0053

1. Languages

Select your preferred on screen display language. This will change the language in which the menus and associated information is displayed in. When set up has been completed, this can be changed by selecting Menu > Settings > Language

3. Network setup You can connect the TV to your broadband router or wire-

less network in order to take advantage of the Smart functions. If you connect the TV to your router using an Ethernet cable (recommended) this step will be skipped. Follow the on screen prompts to connect to your wireless network. You can set up the Network connection later in the network menu.

5. TV Installation – Audio.

Depending on how you use / install your TV, select the appropriate setting. The sound settings on the TV will adjust to suit the type of installation.

6. Default Source

Select the source which you use the most. If Digital TV (Freeview) is chosen, then at the next step, the set will tune in and default to Digital TV (Freeview). If one of the other sources is selected, then the set will not tune in at this stage and default to that input. If it is required to tune the set in later, this can be achieved by selecting Menu > Channels

First time installation

4. Environment of Use

Home Mode: For normal use, by default it is set to a power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel). This can be changed in the picture mode settings.

NOTE: In Home Mode, the TV will switch itself to the standby mode after 4 hours in the event that the buttons on the remote control or TV set are not used.

Store Mode: For store display use. The picture is adjusted to optimum settings. The store demonstration will appear on the screen automatically after two minutes.

1 2 3

4 5 6

2. Country Selection

Select the correct ﬂ ag for the country in which the set will be used in. This will enable the set to correctly install the functions applicable in the country of use.

Setting up the TV set for the  rst time

Connectivity

* The Ethernet/LAN port is used for Freeview HD services and smart functions.

Ethernet/LAN* Network connection

Digital Audio Digital Optical Audio Output

USB 2.0 2 x USB port 2.0

HDMI 1 HDMI input

HDMI 2 HDMI input (ARC)

YPbPr HD input (YPbPr)

AV IN Audio/Video input

Mini SCART Mini SCART input

SAT IN Satellite input

RF in RF / TV aerial input

HDMI 3** HDMI input

USB 3.0 USB port 3.0

CI card in Common interface module

SD SD card input

Earphones Earphone input

ARC



EARPHONE

Fitting the stand

For the stand installation, there is one type of screw provided as shown below. To complete the stand installation you will require a cross head screw driver. Place the TV set on a ﬂ at and clean surface with the panel facing downwards to avoid damage.

4 x

3 4

Used for attaching the stand to the TV set ( g.2)

4 x

TV panel must be facing downwards.

Place the TV set on a ﬂ at and clean surface with the panel facing downwards to avoid damage.

When the stand feet are installed correctly the stand feet will be longest at the front of the TV and shortest at the back with the feet pointing away from each other.

When the stand/feet are in the correct position, secure the feet to the underside of the TV set using 4 screws provided.

What is included in the box

1 x TV

1 x Mini composite / AV cable

1 x Mini component / YPbPr cable

1 x Remote Control

1 x Stand installation pack

2 x AAA Batteries

1 x Power cable 1 x Mini SCART cable

Connecting your set

1) Connect the TV to your power socket.

2) If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip this step.

Outdoor Digital TV Aerial

3 Powering On the TV

Switch on the television by pressing the TV control stick located on the TV set.

TV control stick

Insert the batteries supplied into the remote control and press the standby button to power on the TV.

TV Control Stick Remote Control: Installing Batteries

guarantee online within

14 days of purchase at

www.registertoday.co.uk/sharp

and enter into a prize draw to

win a Sharp Soundbar

arantee online within

Terms and conditions apply. Online registration only.

Back/Shortest

Front/Longest

1 x RF Cable

To obtain a copy of your Operating Instructions, please go to: www.umc-uk.co.uk/instruction-manuals/sharp

4 days of purchase at

www.registertoday.co.uk/shar

nd enter into a prize draw t

win a Sharp Soun