In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its
original condition and only parts identical to those specified should be used.
OUTLINE
This model is based on the current model 55/61R-WP5H. The HD (RGB) INPUT is not available and the style
partially redesigned.
This Service Manual covers only the modifications from the basic model. For details, refer to the 55/61R-WP5H
Service Manual.
CONTENTS
CHANGING PART LIST ............................................................................................................................ 2
MAIN UNIT-1/5 ................................................................................................................................................
MAIN UNIT-3/5 ................................................................................................................................................
PARTS LIST .............................................................................................................................................. 8
•
55R-WP4H
Page
4
6
SHARP CORPORATION
This document has been published to be used for after
sales service only.
The contents are subject to change without notice.
The 55/61R-WP4H does not have the following parts when compared to 55/61R-WP5H.
IC1401, IC1402, IC1901 to IC1903
Q1901 to Q1905
D1901 to D1905, D1953, D1954
L1901
C1406 to C1418, C1901 to C1922, C1925, C1930, C1931
R1448 to R1452, R1454 to R1461, R1464 to R1468, R1901 to R1907, R1909, R1910, R1912 to R1917,
R1919, R1921 to R1925, R1960 to R1973
SC1953
Replacement parts which have these special safety characteristics
identified in this manual; electrical components having such features
are identified by
and Schematic Diagrams. The use of a substitute replacement part
which dose no have the same safety characteristic as the factory
recommended replacement parts shown in this service manual may
create shock, fire or other hazards.
"HOW TO ORDER REPLACEMENT PARTS"
To have your order filled promptly and correctly, please furnish the
following informations.
1. MODEL NUMBER2. REF. NO.
3. PART NO.4. DESCRIPTION
in USA: Contact your nearest SHARP Parts Distributor to order.
Ref. No.Part No.★DescriptionCode
PRINTED WIRING BOARD ASSEMBLIES
PWB-A
å and shaded areas in the Replacement Parts Lists
For location of SHARP Parts Distributor, Please call TollFree; 1-800-BE-SHARP
★MARK: SPARE PARTS-DELIVERY SECTION
ç
MARK : X- RAY RELATED PARTS
(NOT REPLACEMENT ITEM)
DSETUA232FMV1S
DUNTKA232WEV1 – Main Unit—
M Service chassisDC
Ref. No.Part No.★DescriptionCode
CABINET PARTS
2GCOVA1051MESB M Control CoverAR
3GDORF1117MESB M Front DoorAL
4HGRL-5004MESA M Speaker Grille
4HGRL-5003MESA M Speaker Grille
7HPNLC1107MEKB M Control PanelAQ
10CWAKP0109ME02 M Frame-Top (61R-WP4H)BQ
10CWAKP0108ME02 M Frame-Top (55R-WP4H)BP
11CWAKP0106ME02 M Frame-Bottom(61R-WP4H) AZ
11CWAKP0107ME02 M Frame-Bottom(55R-WP4H) AY
12CWAKP0103ME02 M Frame-Side, x2
12CWAKP0105ME02 M Frame-Side, x2
24HBDGB3121CESB M BadgeAF
29HiNDP0111MEKZ M Indication Plate-RearAX
35CHLDZ0105ME02 M Corner (RT), x2AE
36CHLDZ0106ME02 M Corner (LT), x2AE
(61R
-WP4H)BP
(55R
-WP4H)BT
(61R-WP4H)
(55R-WP4H)
AW
AX
SUPPLIED ACCESORRIES
TGAN-1006MEZZ M Registration CardAD
TiNS-7360MEZZM Operation ManualAK
No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without
prior written permission of the publisher.
D SMCA P SMCA TQ1161-S
Jun. 2001 Printed in Japan
SY. KD
SHARP CORPORATION
AV Systems Group
Quality & Reliability Control Center
Yaita, Tochigi 329-2193, Japan
10
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.