COLOUR TELEVISION
21K-FD3SA
21K-FD3SA H
21K-FD5SA
21K-FD5SM
OPERATION MANUAL
ENGLISH
FRANÇAIS
Please read this operation manual carefully before using the colour television.
MELAYU
Contents
E1 [ SAFETY PRECAUTIONS ]
E2 [ BEFORE
OPERATING
TELEVISION ]
•Connecting to an antenna
•Connecting to an antenna via a VCR
E3 [ DVD PLAYBACK ]
•Connecting to a DVD player
•Watching DVD playback
E4 [ ACCESSORIES ]
E5 [ PART NAMES ]
•TV set
•Using headphone
•Remote control
•Installing batteries
•OSD indicator quick reference
E6 |
[ BASIC OPERATION ] |
E11 |
[ USEFUL FEATURES ] |
|
|
• Turn on the power |
|
• Channel/Timer display |
|
|
• On-screen display |
|
• Mute |
|
|
language selection |
|
• Channel recall |
|
|
• Channel selection |
|
• TV/Video selection |
|
|
• Adjusting volume |
|
• Surround sound |
|
E7 |
[ PRESETTING |
E12 |
[ NICAM/A2 STEREO |
|
|
CHANNELS ] |
|||
|
|
SYSTEM |
||
|
• Auto channel tuning |
|
||
|
|
BROADCASTS ] |
||
|
• Manual channel tuning |
|
||
|
Only for 21K-FD5SA/21K-FD5SM |
|||
E8 |
[ SETTING AND |
|||
E13 |
[ TELETEXT |
|||
|
ADJUSTMENT ] |
|||
|
|
BROADCASTS ] |
||
|
• Channel setting |
|
||
|
• Picture or Sound |
E14 |
[ CONNECTIONS ] |
|
|
adjustment |
|||
|
|
• Connecting to video |
||
E9 |
[ TIMER SETTING ] |
|
||
|
equipment |
|||
|
• Off timer |
E15 |
[ TROUBLESHOOTING ] |
|
|
• On timer |
|||
|
E16 |
[ SPECIFICATIONS ] |
||
|
• Reminder on-screen timer |
|||
E10 |
[ FEATURES ] |
|
|
|
|
• Blue screen |
|
|
|
|
• Child lock |
|
|
|
• Text
TINS-C147WJZZ 06P01-MSP
E1 SAFETY PRECAUTIONS
Damage
Turn off the power and unplug the power cord from the wall
outlet immediately if the TV set begins to make any unusual noises or gives off smoke or an unusual smell. Then call your dealer for service.
Servicing
To reduce the risk of electric shock, do not remove the back of the cabinet. This TV set contains dangerous voltage.
Unstable surface and shocks
Do not place this TV set on an
unstable cart, stand, shelf, or table. The TV set may fall, causing serious injury to a child or adult, and serious damage to the set. Sharp recommends securing the TV set to a stable surface or wall to prevent the set from falling due to sudden shocks or impact.
Power-cord protection
To prevent electrical shock, do
not subject the AC power cord to damage by bending or twisting it, or by placing heavy items on top of it and do not place the AC power cord under the TV set. If the AC power cord becomes damaged, unplug it from the wall outlet immediately and call your dealer for service.
Moisture
To prevent electrical shock, do not use the TV set in an excessively damp place.
Water
To prevent fire or electrical shock, do not place the TV set
near a bathroom, swimming pool or other area where it may become wet.
Liquid entry
Do not place a flower vase or anything else containing liquid
on the TV set, as liquid spilt on the TV set can cause electrical shock or failure.
Object entry
Never insert or drop any metallic or inflammable objects into the
ventilation openings of the TV set, as this can cause fire, electrical shock, or electrical failure.
TV Set position
Do place the TV set onto an even stand, table or rack which size is bigger than the TV set. If the TV set is put onto a smaller
size or uneven stand, table or rack may cause the TV cabinet to distort.
Do not put or insert anything between TV set and the stand, table or rack.
Uneven surface and excessive force
Television equipment and cart
combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn.
Ventilation
Do not place this TV set in a confined area, such as on a
bookshelf or in a built-in case. Leave adequate space behind the TV for proper ventilation.
Fire prevention
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
E2 BEFORE OPERATING TELEVISION
Connecting to an antenna |
Connecting to an antenna via a VCR |
||
|
|
|
TV |
300-ohm |
75-ohm |
TV |
|
twin-lead |
impedance |
|
|
|
|
||
flat feeder |
converter |
|
|
(not supplied) |
(not supplied) |
VCR |
|
|
|
|
|
75-ohm |
|
|
|
coaxial cable |
|
|
|
(round cable) |
|
To RF out |
|
(not supplied) |
|
||
|
|
To antenna |
terminal |
|
Antenna in |
|
|
|
in terminal |
Antenna in |
|
Standard DIN45325 |
|
||
plug (IEC169-2)
If your outdoor antenna uses a 75-ohm coaxial cable with a standard DIN45325 plug (IEC 169-2), plug it into the antenna jack at the rear of the set.
If your outdoor antenna uses a 300-ohm twin-lead flat feeder, connect a 300-ohm to 75-ohm impedance converter and plug it into the antenna jack at the rear of the set.
E3 DVD PLAYBACK
Connecting to a DVD player
The DVD input terminals (COMPONENT-IN) on the rear of the TV can be used to input highquality images from a DVD player.
|
|
|
DVD input terminals |
Connecting the video terminals |
||
TV |
Green : To Y |
|
Red : To AUDIO IN (R) |
DVD input terminals |
DVD player |
|
Blue |
: To PB (CB) |
|
White : To AUDIO IN (L) |
|||
|
|
|||||
|
Red |
: To PR (CR) |
|
|
|
|
|
|
|
|
|
Y |
Y or Y/Y |
|
|
|
|
|
COMPONENT-IN PB(CB) |
PB(CB) or |
|
|
|
|
|
B-Y/Pb |
|
|
|
|
|
|
VIDEO |
|
|
|
|
|
|
PR(CR) or |
|
|
To colour-difference |
|
To audio out |
PR(CR) |
||
|
(component video) |
|
R-Y/Pr |
|||
|
out terminals |
DVD player |
(L/R) terminals |
|
||
|
|
|
|
|
|
|
Watching DVD Playback
COMPONENT
! Press TV/VIDEO to select “COMPONENT”, DVD
input screen.
@ Turn on the DVD player and begin playback.
•When connecting the TV to a DVD player via the COMPONENT-IN terminals, the video and audio from the DVD player cannot be output through the Audio/Video out terminals on the TV.
LANGUAGE 
TV/VIDEO
TV/VIDEO
1 2 3
MPX
4 5 6
SURROUND
7 8 9
|
|
0 |
|
A |
B |
C |
D |
|
|
CH |
|
|
|
CH |
|
NORMAL |
|
|
MENU |
• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.
E4 ACCESSORIES
The following accessories are included with this television.
Remote |
Size-AA batteries |
Operation manual |
E5 PART NAMES
TV set
To open the door
Using the projection located under the
“
PULL-OPEN” indication, pull and lift the door open.
To close the door
Using the projection, lower the door until closed.
Caution:
• When opening or closing the door, do not insert your fingers into the gap between the door and front panel. This may result in an injury.
Door
Bottom
! @ # $ % ^ & * (
!
POWER 
POWER switch
Turns on and off the main power.
@Power indicator
Power can be turned on by the remote control when the indicator is dimly lit.
#Infrared sensor window
Receives the infrared wave from the remote control.
$ MENU/PRESET MENU/PRESET button
Tunes the channels. Used for MENU setup.
%
/
Volume up/down buttons
Adjusts the volume.
Makes adjustments in PRESET.
^CH 
/ CH
Channel up/down buttons
Selects the channels.
Tunes or sets the channels.
&Video input terminal (AV-2 IN)
Connects to a camcorder, video game, etc.
*Audio input terminals (AV-2 IN)
Connects to a camcorder, video game, etc.
(Headphone jack
Use to listen to the audio with headphone.
Using headphone
[ Behind the door ]
Insert headphone plug into headphone jack to listen to audio with headphone.
• The audio from the speakers is turned off.
•To avoid injuring your hearing, do not put on the headphone before plugging them into the headphone jack and before the power is turned on.
E5 PART NAMES (Continued)
Remote control
Turns the TV on or to Standby mode.
Mutes the sound and restores sound to previous level.
Infrared transmitter window
Aim this window at the infrared sensor window on your TV set.
LANGUAGE 
TV/VIDEO
LANGUAGE
Changes the on-screen display language.
TV/VIDEO
Switches between TV broadcasts and A/V input programmes.
MPX
Switches between main and sub sound, and stereo and monaural sound.
SURROUND
Produces a more spacious sound.
Calls the TIMER screen.
Colour buttons Operate the Favourite Channel and Teletext functions.
/
Adjusts the volume.
Used for MENU setup.
Only for 21K-FD3SA/21K-FD3SA 
VIDEO 1 To enter AV1
(or COMPONENT) directly.
VIDEO 2
To enter AV2 directly.
|
1 |
2 |
3 |
MPX |
|
|
|
|
4 |
5 |
6 |
SURROUND |
|
|
|
|
7 |
8 |
9 |
|
|
0 |
|
A |
B |
C |
D |
|
|
CH |
|
|
|
CH |
|
NORMAL |
|
|
MENU |
TV/TEXT
Displays the channel and timer settings on the screen.
Number buttons
Switches between oneor two-digit mode channel selection.
Returns to previously viewed channel.
CH
/ CH
Selects the channel.
Used for MENU setup.
MENU
Calls the MENU screen.
Teletext buttons
Operate the Teletext functions.
NORMAL
Resets all settings.
OSD indicator quick reference
OSD |
Remote |
TV set |
Operation |
|
indicator |
control |
|||
|
|
|||
|
CH |
|
Used to select items. |
|
|
|
|
||
|
CH |
|
|
|
|
|
|
Used to adjust or enter |
|
|
|
|
the selected items. |
|
|
|
|
Used to return to |
|
|
MENU |
|
previous screen or |
|
|
|
|
exit Menu screen. |
Installing batteries
1 Pull up or replace back the battery cover.
2 Insert two batteries 
(size AA). Be 
sure to match 
the battery j/k terminals.
•OSD: On-Screen Display
•Please refer to this table for all the OSD operation in this manual.
E6 BASIC OPERATION
Turn on the power
•When the power indicator is off, press 
POWER .
•When the power indicator lights up dimly, press 
on the remote control.
The power indicator changes to bright and a picture appears.
On-screen display language selection
Remote Control
• Press LANGUAGE to select desired language.
• Pressing LANGUAGE changes the language as shown below.
ENGLISH 
FRANÇAIS 
BAHASA MELAYU 
TV set
•Press MENU/PRESET for more than two seconds, the language select mode appears.
• Press CH |
/ |
CH |
to select desired language. |
|
• Pressing MENU/PRESET |
changes the screen as shown below. |
|||
Language |
AUTO |
|
MANUAL |
Normal screen |
• Press MENU/PRESET until normal screen appears.
ENGLISH
ENGLISH
FRANÇAIS BAHASA MELAYU
Channel selection
! Using |
CH |
/ CH |
|
|
• Press |
CH |
and channels change as shown below. |
|
|
1 / 2 / ... / 98 / 99 / AV1 (or COMPONENT) / AV2 / 0 |
/ 1 / 2 ... |
|||
• Press |
CH |
and channels change as shown below. |
|
|
1 / 0 / AV2 / AV1 (or COMPONENT) / 99 / 98 |
/ ... / 2 |
/ 1 / 0 ... |
||
@ With the number buttons (on remote control)
• To select a one-digit channel, such as 5, press |
5 . |
||
If “5-” is indicated, press |
to select one-digit |
||
input, and then press 5 |
again. |
|
|
• To select a two-digit channel, such as 15, press |
|
||
to select the two-digit input. Press 1 |
, and |
||
then press |
5 . |
|
|
--
1-
15
PAL B/G
[ TV Set (Bottom) ]
POWER
Power indicator
[ Behind the door ]
CH
CH
MENU/PRESET
LANGUAGE
LANGUAGE TV/VIDEO
1
1 |
2 |
3 |
|
MPX |
|
|
|
4 |
5 |
6 |
5 |
SURROUND |
|
|
|
7 |
8 |
9 |
|
|
0 |
|
|
A B |
C |
D |
|
|
CH |
|
CH |
|
CH |
|
|
|
|
|
|
NORMAL |
|
MENU |
CH |
TV/TEXT
Adjusting volume
!Adjust volume using 
/ 
.
•The volume bar disappears approximately three seconds after the volume has been adjusted.
VOLUME |
10 |
• When the power indicator lights up dimly, either CH |
/ CH |
on the TV can be pressed to turn on the power. |
|||
• Channels that have been skipped cannot be selected by |
CH |
/ CH |
. |
|
|
• The AV1 (or COMPONENT), AV2 input channels cannot be selected using |
CH |
/ CH |
on the remote control. |
||
Use TV/VIDEO to select these channels. |
|
|
|
|
|
Loading...