Sharp 14J1-GA, 14J1-SA, 14J1-SM, 21J1-GA, 21J1-SA Operating Manual

E1 SAFETY PRECAUTIONS

MENU/

PRESET

POWER

(21J1-GA/21J1-SA/21J1-SM)

ENGLISH

Contents

E1 [ SAFETY

PRECAUTIONS ]

E2 [ ACCESSORIES ]

E3 [ BEFORE

OPERATING
TELEVISION ]

• Connecting to an
antenna

• Connecting to an
antenna via a VCR

• Rod antenna
connection

E4 [ PART NAMES ]

• TV set

• Using headphone

• Remote control

• Installing batteries in the
remote control unit

Servicing

To reduce the risk of electric
shock, do not remove the back
of the cabinet. This TV set
contains dangerous voltage.

COLOUR TELEVISION

14J1-GA 21J1-GA

Damage

Turn off the power and unplug
the power cord from the wall
outlet immediately if the TV set begins to make
any unusual noises or gives off smoke or an
unusual smell. Then call your dealer for service.

14J1-SA 21J1-SA
14J1-SM 21J1-SM

OPERATION MANUAL

VIDEO AUDIO

CH

AV-2 IN

E5 [ BASIC OPERATION ]

E6 [ PRESETTING

E7 [ SETTING AND

E8 [ TIMER SETTING ]

Please read this operation manual
carefully before using the colour
television.

E9 [ FEATURES ]

• Turn on the power

• On-screen display
language selection

• Channel selection

• Adjusting volume

CHANNELS ]

• Auto channel tuning

• Manual channel tuning

ADJUSTMENT ]

• Channel setting

• Picture adjustment

• Off timer

• On timer

• Reminder on-screen
timer

• Blue screen

E10[ USEFUL

FEATURES ]

• Channel/Timer display

• Mute

• Channel recall

• TV/Video selection

E11[ CONNECTIONS ]

• Connecting to video
equipment

E12[ TROUBLESHOOTING ]

E13[ SPECIFICATIONS ]

TINS-C085WJZZ
05P11-MSF

Unstable surface
and shocks

Do not place this TV set on an
unstable cart, stand, shelf, or table. The TV set
may fall, causing serious injury to a child or
adult, and serious damage to the set. Sharp
recommends securing the TV set to a stable
surface or wall to prevent the set from falling
due to sudden shocks or impact.

Moisture

To prevent electrical shock, do
not use the TV set in an
excessively damp place.

Liquid entry

Do not place a flower vase
or anything else containing liquid
on the TV set, as liquid spilt on the TV set can
cause electrical shock or failure.

TV Set position

Do place the TV set onto an even
stand, table or rack which size is
bigger than the TV set.
If the TV set is put onto a smaller
size or uneven stand, table or rack may cause
the TV cabinet to distort.
Do not put or insert anything between TV set
and the stand, table or rack.

Ventilation

Do not place this TV set in a
confined area, such as on a
bookshelf or in a built-in case. Leave adequate
space behind the TV for proper ventilation.

Power-cord
protection

To prevent electrical shock, do
not subject the AC power cord to damage by
bending or twisting it, or by placing heavy items
on top of it and do not place the AC power cord
under the TV set. If the AC power cord becomes
damaged, unplug it from the wall outlet
immediately and call your dealer for service.

Water

To prevent fire or electrical
shock, do not place the TV set
near a bathroom, swimming pool or other area
where it may become wet.

Object entry

Never insert or drop any metallic
or inflammable objects into the
ventilation openings of the TV set, as this can
cause fire, electrical shock, or electrical failure.

Uneven surface and
excessive force

Television equipment and cart
combination should be moved with care. Quick
stops, excessive force, and uneven surfaces
may cause the equipment and cart combination
to overturn.

Fire prevention

To prevent fire, never place any
type of candle or naked flames on
the top or near the TV set.

E4 PART NAMESE2 ACCESSORIES

The following accessories are included with this television.

Remote Control Size-AA batteries

Operation manual

Rod antenna (dipole) with ribbon feeder

(only for 14J1-GA/14J1-SA/14J1-SM)

E3 BEFORE OPERATING TELEVISION

Connecting to an antenna

75-ohm

75-ohm
impedance
converter
(not supplied)

Antenna in

AV-1 INOUT

AUDIO

CAUTION : DANGEROUS
VOLTAGE INSIDE

VIDEO

TO PREVENT ELECTRIC SHOCK.
DO NOT REMOVE COVER.
NO UBER-SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
QUALIFIED SERVICE

PERSONAL.

300-ohm
twin-lead
flat feeder
(not supplied)

coaxial cable
(round cable)

(not supplied)

Standard DIN45325

plug (IEC169-2)

If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC 169-2),
plug it into the antenna jack at the rear of the set.

Rod antenna connection

Antenna
mounting socket

Antenna
jack

(14J1-GA/14J1-SA/14J1-SM)

CAUTION : DANGEROUS
VOLTAGE INSIDE

TO PREVENT ELECTRIC SHOCK.
DO NOT REMOVE COVER.
NO UBER-SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
QUALIFIED SERVICE

PERSONAL.

AV-1 IN OUT

AUDIO

VIDEO

Rod Antenna

Feeder

Impedance
Converter

Connecting to an antenna via a VCR

TV

VCR

To RF out

To antenna
in terminal

If your outdoor antenna uses a 300-ohm twin-lead
flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.

(1) Insert the rod antenna's base post into the

antenna mounting socket until it clicks into
position.

(2) Connect the feeder to the impedance converter.

(3) Plug the impedance converter into the antenna

jack at the rear of the set.

• Rod antenna and impedance converter are only
included in model 14J1-GA/14J1-SA/14J1-SM.

terminal

300-75 impedance converter

TV

AV-1 INOUT

AUDIO

CAUTION : DANGEROUS
VOLTAGE INSIDE

VIDEO

TO PREVENT ELECTRIC SHOCK.
DO NOT REMOVE COVER.
NO UBER-SERVICEABLE PARTS
INSIDE, REFER SERVICING TO

PERSONAL.

QUALIFIED SERVICE

Antenna in

TV set

This operation manual is for
14J1-GA, 14J1-SA, 14J1-SM,
21J1-GA, 21J1-SA and 21J1-SM.
The illustration of 21J1-GA/
21J1-SA/21J1-SM are used in
this operation manual.

POWER

VIDEO AUDIO

MENU/

CH

PRESET

AV-2 IN

(21J1-GA/21J1-SA/21J1-SM)

Bottom

CH

POWER

POWER switch

Turns on and off the

main power.

Power can be turned on by the

remote control when the indicator

Receives the infrared wave from

Power indicator

is dimly.

Infrared sensor window

the remote control.

MENU/PRESET

MENU/PRESET button

Tunes the channels.

Used for MENU setup

Video input terminal (AV-2 IN)

Connects to a camcorder,
video game, etc.

CH

Channel up/down buttons

Selects the channels.
Tunes or sets the channels.

.

Volume up/down buttons

/

Adjusts the volume.
Makes adjustments in PRESET.

Using headphone

Insert headphone plug into headphone jack to listen to audio with
headphone.

• The audio from the speakers is turned off.

Headphone jack

Use to listen to the audio
with headphone.

Audio input terminal (AV-2 IN)

Connects to a camcorder,
video game, etc.

CH

/

[ TV set (Bottom) ]

• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.

• If you are using a rod antenna and the signal from TV station is weak or not clear, the picture may not display clearly
or properly. In this case, we recommend that you use an outdoor antenna.

• To avoid injuring your hearing, do not put on the headphone before plugging them into the headphone jack and before
the power is turned on.

E5 BASIC OPERATIONE4 PART NAMES (Continued)

Remote control

Infrared transmitter window

Aim this window at the infrared
sensor window on your TV set

.

Turns the TV on or to Standby mode.

TV/VIDEO

1

2

5

8

0

CH

CH

TIMERFEATURE

NORMAL

3

6

9

PICTURE

Returns to previously viewed channel.

/

Adjusts the volume.

Used for MENU setup

TIMER

Calls the TIMER screen.

FEATURE

Calls the FEATURE screen.

CH-SET

4

7

.

CH-SET

Calls the CH-SETTING screen.

TV

NORMAL

Resets all settings.

Installing batteries in the remote control unit

TV/VIDEO

Switches between TV broadcasts
and A/V input programmes

.

Number buttons

Switches between one- or two-digit
mode channel selection.

CH

Selects the channel.
Used for MENU setup

Mutes the sound and restores
sound to previous level

PICTURE

/

CH

.

.

Calls the PICTURE screen.

Displays the channel and timer
settings on the screen.

Turn on the power

• When the power indicator is off, press

• When the power indicator lights up dimly, press on the remote
control. The power indicator changes to bright and a picture appears.

POWER

.

On-screen display language selection

TV set

• Press

• Press

• Pressing

• Press

MENU/PRESET

for more than two seconds, the language

select mode appears.

CH

Language MANUAL

MENU/PRESET

CH

/

MENU/PRESET

changes the screen as shown below.

AUTO

until normal screen appears.

to select desired language.

Normal screen

ENGLISH

FRANÇAIS
BAHASA MELAYU

Channel selection

! Using

• Press

CH

CH

1 / 2 / ... / 98 / 99 / AV 1 / AV2 / 0 / 1 / 2 ...

• Press

CH

1 / 0 / AV2 / AV1 / 99 / 98 / ... / 2 / 1 / 0 ...

@ With the number buttons (on remote control)

• To select a one-digit channel, such as 5, press
“5-” is indicated, press to select one-digit input,
and then press

• To select a two-digit channel, such as 15, press
to select the two-digit input. Press
press

5

CH

/

and channels change as shown below.

and channels change as shown below.

5

again.

1

, and then

.

5

. If

[ TV Set (Bottom) ]

POWER

[ TV set (Bottom) ]

MENU/PRESET

--

1-

15

PAL
B/G

Power indicator

TV/VIDEO

1

3

4

6

5

728

9

0

CH

CH

TIMERFEATURE

PICTURE

NORMAL

CH-SET

TV

CH

CH

CH

1

5

CH

CH

With your thumbnail, pull
up at the slit to open the

a

battery cover.

Insert two batteries
(size AA).

b

Replace the battery
cover.

c

Adjusting volume

! Adjust volume using / .

• The volume bar disappears approximately three seconds
after the volume has been adjusted.

• When the power indicator lights up dimly, either

• Channels that have been skipped cannot be selected by

• The AV1, AV2 input channels cannot be selected using
these channels.

CH

/

CH

VOLUME 10

CH

on the TV can be pressed to turn on the power.

CH

CH

/

/

.

CH

on the remote control. Use

TV/VIDEO

to select