Sharp 14D2-SS, 20D2-SS, 21D2-SS Operating Manual

COLOUR TELEVISION TÉLÉVISEUR COULEUR
OPERATION MANUAL MODE DEMPLOI
ENGLISH
FRANÇAIS
TINS-B721WJZZ 05P01-MSP
Please read this operation manual carefully before using the colour television.
Veuillez lire attentivement ce mode d’emploi avant d’utiliser ce téléviseur couleur.
TINS-B721WJZZ 05P01-MSP
Contents
Page
Safety Precautions................................................ 1
Accessories ........................................................... 3
Antenna Connection ............................................. 3
Headphone Jack ................................................... 3
Location of Controls.............................................. 4
Basic Operation .................................................... 6
OSD (On-Screen Display) Language Selection ... ‰ 8
Presetting Channels ............................................. 8
• Full Auto Channel Preset (AUTO)
• Manual Channel Preset (MANUAL)
Fine Tuning ............................................................ 10
Flashback .............................................................. 10
Skipping Channels ................................................ 11
Picture Adjustment ............................................... 12
Timers .................................................................... 13
• Reminder
• OFF Timer
• ON Timer
Colour and Sound System ................................... 16
Functions Adjustment ........................................... 17
• Blue Back
• White Temp
u Sound Mute
Call
• TV/VIDEO
Video Equipment Connections............................. 20
Troubleshooting..................................................... 21
Specifications ........................................................ 22
Page
Dear Sharp Customer
Thank you for buying SHARP Colour Television Receiver. To ensure proper operation, please read this manual carefully. After reading, keep this manual in a safe place for future reference.
Safety Precautions
To prevent fire or electrical shock, do not use the TV set in an excessively damp place.
Do not cover the ventilation holes at the back of the TV set, this can cause fire or other serious problems. Leave an adequate open space behind the TV set for good ventilation.
Do not place this set in confined spaces, such as a bookshelf or built-in case.
Position the TV set out of direct sunlight and away from heat, as high temperatures can damage the cabinet, CRT, or other electronic parts.
Never insert or drop any metallic or inflammable objects into the ventilation holes of the TV set, this can cause fire, electrical shock, or electrical failure. Do not place a flower vase or anything else containing liquid on the TV set, as liquid spilt on the TV set can cause serious problems.
Do not place this television equipment on an unstable cart, stand or table. The television equipment may fall, causing serious injury to a child or an adult and serious damage to the equipment.
Use only with a cart or stand recommended by the manufacturer, or sold with the television equipment.
1
Safety Precautions (continued)
Television equipment and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn.
Do place the TV set onto an even stand, table or track which size is bigger than the TV set. If the TV set is put onto a smaller size or uneven stand, table or track may cause the TV cabinet distort.
Do not put or insert anything between TV set and the stand, table or track.
Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturer.
To prevent electrical shock, do not subject the AC power cord to damage by bending or twisting it, or by placing heavy items on top of it and do not place the AC power cord under the TV set. If the AC power cord becomes damaged, unplug it from the wall outlet immediately and call your dealer for service.
ENGLISH
Never remove the back of the cabinet, as there is high voltage inside the TV set.
Unplug the power cord from the wall outlet immediately if the TV set begins to make unusual noises or give off smoke or an odd smell, then call our service centre for service.
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the products.
2
Accessories
After unpacking, check to make sure that the following accessories are included:
TV/VIDEO
1
2
3
4
5
6
7
8
9
0
CH
CH
TIMERFUNCTION
PICTURE
NORMAL
SYSTEM
TV
Rod antenna (dipole) with ribbon feeder
300 - 75 impedance converter
Remote control Size-AA dry batteries
(Only for 14D2-SS)
Antenna Connection
• The following is a brief explanation of the types of connection that are used for coaxial cables:
(1) If your outdoor antenna uses a 75-ohm coaxial cable, then
the connection to the TV is via DIN45325 plug (shown at right). Plug this into the antenna jack at the rear of the TV set.
(2) If your outdoor antenna uses a 300-ohm twin-lead flat
feeder, change this for a 300-ohm to 75-ohm impedance converter and plug it into the antenna jack at the rear of the TV set.
• Rod Antenna Connection
Antenna mounting socket
Rod Antenna
Feeder
(1) Insert the rod antennas base post into the
antenna mounting socket until it clicks into position.
75-ohm coaxial cable (round cable)
300-ohm twin-lead feeder
(2) Connect the feeder to the impedance converter.
(3) Plug the impedance converter into the antenna
jack at the rear of the set.
AV-IN
OUT
AUDIO
VIDEO
Antenna jack (14D2-SS)
Impedance Converter
Rod antenna and impedance converter are only included in model 14D2-SS.
• Remove the power cord from the electrical outlet before connecting the antenna to the rear of the TV set.
• If you are using a rod antenna and the signal from TV station is weak or not clear, the picture may not display clearly or properly. In this case, we recommend that you use an outdoor antenna.
Headphone Jack
Insert headphone plug into headphone jack to listen to audio with headphone.
The audio from the speakers is turned off.
Select an appropriate volume so as not to injure your hearing.
To avoid injure your hearing, do not put on the headphone on your ear before plug in the headphone to the headphone
jack and before the power is turn on.
Take out the headphone from your ear before unplug the headphone from headphone jack and before the power is turn off.
The proper impedance for the headphone is 32 ohms.
Remove the headphone plug from the jack when not using the headphone.
3
Location of Controls
Remote Control
Infrared Transmitter Window
• Aim this window at the infrared sensor window on your TV set.
TV/VIDEO
!
1
2
4
5
7
8
@
0
#
CH
CH
$
TIMERFUNCTION
%
SYSTEM
PICTURE
NORMAL
^
&
TV
! STANDBY/ON (ø) button
ENGLISH
@ FLASHBACK (z) button
• Returns to previously viewed channel.
# VOLUME UP ( ) or DOWN ( ) button
• Used to adjust the volume.
• These buttons are also used to control
*
3
6
9
(
FUNCTION, TIMER, PICTURE, COLOUR and SOUND SYSTEM.
$ TIMER button
• For Reminder, OFF Timer and ON Timer
% FUNCTION button
• Each time you press the FUNCTION button, the
mode changes in the following order:
FINE SKIP WHITE TEMP
NORMAL SCREEN
BLUE BACKLANGUAGE
^ SYSTEM button
)
Q W
• For COLOUR SYSTEM and SOUND SYSTEM.
& NORMAL button
• Resets all settings.
* TV/VIDEO Select button ( CHANNEL SELECT buttons
1
- 9, 0 and button)
(
) CHANNEL UP (CH) or DOWN (CH≈)
E
button
• Used to select the CHANNEL.
• These buttons are also used to control the OSD LANGUAGE.
Q SOUND MUTE (u) button
• Press Mutes sound.
• Press again Restores sound to previous level.
W PICTURE button
• For adjusting the PICTURE.
E CALL (∫) button
• Displays the channel and timer settings on the screen.
Ë Installing dry batteries in the remote control unit
When using the TV set for the first time, install the supplied dry batteries in the remote control.
Inserting Batteries
Pull up
! With your thumbnail, pull up the slit as indicated by the arrow
to remove the back cover.
@ Insert two batteries (size “AA”). Be sure to match the battery
j/k terminals with the j/k marks inside the compartment.
# Put back the battery cover.
• Remove batteries if weak or if the unit is not in use for long periods.
• Do not mix old and new batteries.
• Incorrect installation of the batteries may damage the remote control.
4
Location of Controls (continued)
TV Front
POWER switch
POWER indicator
Infrared sensor window
CHANNEL UP (CH ∑) or DOWN (CH ≈) button
VOLUME UP ( ) or DOWN ( ) button
(These are also used to make adjustment in PRESET mode).
PICTURE/PRESET button
This operation manual is for 14D2-SS, 20D2-SS and 21D2-SS.
The illustration of 21D2-SS is used in this operation manual.
5
HEADPHONE jack
AUDIO INPUT terminal (AV-IN)
VIDEO INPUT terminal (AV-IN)
Basic Operation
POWER switch
POWER indicator
(1) Turn On the Power
(TV set)
STANDBY/ON (ø) button
CHANNEL UP (CH
VOLUME UP ( ) or DOWN ( ) button
! Press the POWER switch on
the TV set to turn the TV set ON.
TV/VIDEO
1
2
4
5
7
8
0
CH
CH
TIMERFUNCTION
PICTURE
NORMAL
SYSTEM
TV
) or DOWN (CH ≈) button
3
6
9
ENGLISH
TV ON mode: POWER
!
@
POWER indicator
@
TV/VIDEO
1
2
3
4
5
6
7
8
9
0
• Due to factory setting, when the first time you press the POWER switch on the TV set, a picture appears and
the POWER indicator lights up brightly.
• The STANDBY/ON (ø) button on the remote control lets you switch between ON and Standby mode when the
main power is ON.
• If you will not be at home for a considerable length of time, as a safety precaution, turn off the main power by
pressing the POWER switch on the TV set and unplug the cord from the outlet.
indicator lights up brightly. TV Standby mode: POWER
indicator lights up dimly.
@ Press the STANDBY/ON (ø)
button on the remote control or any of the CHANNEL UP
) or DOWN (CH≈)
(CH button on the TV set.
The POWER indicator changes from dimly to brightly and a picture appears on the screen.
(On-screen display)
1
PAL B/G
6
Loading...
+ 16 hidden pages