SharkRack PWS-70115, PWS-77115, PWS-70120, PWS-42115, PWS-77120 User Manual

Vertical Power Strip

Installation Instructions for SharkRack Vertical Power Strips

Kit Contents

List Item # Part Name Quantity Detail

1 Vertical Power Strip 1

2 Hardware Packet

• 1/4-20 Allen Cap Screws (2)

• 1/4” Flat Washer (2)

• 1/4-20 Spring Nuts (2)

Complete kit Part Number

PWS-42115 SH44300 SH44300-5000 42” 120V, 15amp, NEMA 5-15P inlet, 5-15R outlet PWS-70115 SH43400 SH43400-5000 70” 120V, 15 Amp, NEMA 5-15P inlet, 5-15R outlet PWS-77115 SH43600 SH43600-5000 77” 120V, 15 Amp, NEMA L5-15P inlet, 5-15R outlet PWS-70120 SH43500 SH43500-5000 70” 120V, 20 Amp, NEMA 5-20P inlet, 5-15R outlet PWS-77120 SH43700 SH43700-5000 77” 120V, 20 Amp, NEMA 5-20P inlet, 5-15R outlet

List Item #1 Assembly Number

List Item #2 Hardware Packet

05/20/03 Rev 1.0 Page 1 of 3

Proprietary Information of SharkRack, Inc.

32920 Alvarado Niles Road #250, Union City, CA 94587

510-477-7900• 510-324-1664 • www.sharkrack.com

Description

Vertical Power Strip Installation Instructions

Installation Instructions

Step Detail

A vertical power strip is used to supply power to devices needing AC power.

Note: A vertical power strip can be installed on either side of the cabinet.

1. Open the rear door of the cabinet and choose a location for the vertical power strip to be mounted.

2. Install the spring nuts into the cabinet frame. Fit the spring nuts into the slotted part of the cabinet extrusion with the spring going into the opening first. Turn the spring nut 90 degrees, clockwise, to secure it into place.

3. Place the vertical power strip into the rack cabinet. Align the mounting holes top and bottom over the spring nuts.

4. Secure the vertical power strip to the cabinet frame using (2) 1/4-20 x 3/8 inch cap screws using a 3/16 inch Allen wrench to tighten the cap screws.

5. Connect all necessary cables to the facilities power grid or UPS.

6. Check the function of the vertical power strip. Connect a device to each receptical on the vertical power strip to check for power.

Note: The vertical power strip has a resettable circuit breaker. When the breaker trips the center button will extend from the breaker housing. Depress the button back in to reset.

05/20/03 Rev 1.0 Page 2 of 3

+ 1 hidden pages