Sharkoon REV220 User Manual

STYLISH REVOLUTION

With the REV220 ATX midi tower, an elegant case design with subtle RGB lighting meets a new concept in PC case
configuration. The hardware components are installed vertically around a mainboard which has been rotated by 90
degrees. This results in an unconventional eye-catcher, which is displayed behind the extra-large side panel made
of tempered glass. The REV220 also turns its back on PC case conventions and has re-arranged the tempered glass
side panel in such way that the case can be placed on the left side of the desktop without any compromises having
to be made.

CARBON FIBER LOOK MEETS RGB

The minimalist front panel is presented in a carbon fiber
look. Set in the middle of this is a silver-framed aluminium
plate with a diamond cut. The subtle RGB background
lighting around the central plate contributes to the atmo­spheric illumination and lends a colorful touch to the front
of the case.

The REV220 case, along with all other Sharkoon products
marked with the Addressable RGB logo, are certified for
Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion
and ASRock Polychrome SYNC. These products are thus
easy to incorporate into existing systems.

MSI ASUS ASROCK ASUSGIGABYTE

Sharkoon products marked with the "ADDRESSABLE RGB" logo are compatible with
mainboards which have headers for addressable RGB LED fans and strips. The
headers should have the pin configuration 5V-D-coded-G or 5V-D-G. Examples of these
RGB connections from the most important mainboard manufacturers are shown
below. The RGB pin configuration is independent of manufacturer. However, the
naming and marking of these connections may vary between manufacturers. For
further information concerning compatibility, refer to the manual of your mainboard, or
visit the manufacturer's website.

8-PORT ADDRESSABLE
RGB CONTROLLER

The REV220 comes with a preinstalled addressable RGB controller. With
compatible mainboards, this will function as a hub for controlling and
synchronizing up to eight addressable LED components, which will illuminate
in up to 16.8 million colors. The controller is connected to the power supply via
a SATA connector and to a mainboard via a 4-pin or 3-pin header for
addressable LEDs with the pinout: 5V-D-coded-G or V-D-G.

Mainboard Addressable

RGB Pin Header

Addressable RGB LED

or

VDG

Fans/ Strips

Addressable RGB LED

Fans/ Strips

SATA

MANUAL COLOR CONTROL

The REV220 also has a manual color control function for mainboards which do
not have headers for addressable LED components. With this, the RGB cont­roller is not connected to the mainboard, but rather connected to the power
supply and the reset switch of the PC case. The switch’s reset function is then
replaced with a new function which allows up to fourteen lighting modes to be
cycled through and selected, or, if desired, the lighting can be turned o.

Addressable RGB LED

Fans/ Strips

Red Green Blue White

RGB

Mode 7

RGB

Mode 6

Yellow

Cyan

RESET SW

RGB

Mode 5

RGB

Mode 4

RGB

Mode 3

RGB

Mode 2

RGB

Mode 1

Pink

Addressable RGB LED

Fans/ Strips

SATA

A CASE CONFIGURATION TURNED
ON ITS HEAD

As with all the cases of the REV series, the REV220 represents a completely new concept in terms of case configura­tion. Here, the hardware components are installed around a mainboard which is turned 90 degrees. Apart from its
visual appeal, the case provides a fully new experience in terms of building and modding. The mainboard connec­tions and the slots for add-on cards are also turned 90 degrees and are accommodated in a cable compartment with
a magnetically attached cover. This and the various cable pass-throughs, which have been tailored to the case
design, ensure neatness and tidiness inside the case.

TIDY CABLE MANAGEMENT

The REV220 will always stay tidy. In addition to a power supply tunnel and various cable pass-throughs, it also
has a spacious cable compartment on the top.

Magnetic Cover with Dust Filter

and Perforation for
an Optimal Airflow.

Here, the cables are held together with a cable clip and led to the outside of the case via a cable pass-through.
The top panel has a magnetic cover for easy access to the cable compartment and to protect from dirt and dust.

UNCLUTTERED CASE INTERIOR

The cabling of the built-in hardware can run around the logically arranged cable pass-throughs behind the
mainboard tray. Here, plenty of room is provided, allowing the cables to be neatly held together

2.0 cm

The power supply can be mounted decoupled inside the REV220 in order to prevent vibrations.
This is supported by the four decoupled power supply spacers within the power supply tunnel.

A FRESH WIND
ON ALL LEVELS

At the front of the case, side air intakes and three pre­installed 120 mm fans maintain a strong inward flow of air.
In addition, two addressable RGB 120 mm fans eectively
convey the warmed air out through the back of the case
while, at the same time, providing an atmospheric illuminat­ion for the installed hardware.

If more cooling performance is needed, the three fans behind the front panel can be exchanged for two 140 mm
models, or, alternatively, a radiator with up to 360 mm. Also, the fans on the rear panel can be replaced by two 140 mm
fans or by a radiator of up to 240 mm. Even the decoupled power supply can be mounted, as desired, in two dierent
positions. At the same time, dust filters protect each of the case air intakes.

Power Supply Fan Installed UpwardsConventional Installation

MODERN FEATURES

Removable Dust Filter
With Magnetic Fastener

5x

120 mm

Fans

Easily Accessible Top I/O Ports
above Front Panel

Removable Dust Filter
on the Bottom Panel

HARDWARE WITHOUT
COMPROMISES

48.5 cm

48.0 cm

Max. Length

Graphics Card: 32.3 cm

Max. 360 mm Radiator

16.5 cm

Despite the innovative configuration of the
REV series, no compromises must be made
when selecting hardware. The REV220 also
has space for large graphics cards with a
length of up to 32.3 cm, power supplies with a
length of 20 cm, and CPU coolers with a
height of up to 16.5 cm. There is also space for
up to two 3.5" hard drives and two SSDs in
removable cages within the power supply
tunnel, as well as two further SSDs behind the
mainboard tray.

Max. 240 mm Radiator

Max. Length

Power Supply: 20 cm

SSD SSD

SSD

HDD

Cover is Removable for
Radiator Installation

8-Port Addressable
RGB Controller

SSD

HDD

Removable HDD/SSD Cages

SPECIFICATIONS

General:

 Form Factor: ATX
 Expansion Slots: 7
 Interior Painting: 
 Cable Management System: 
 Tool-free Devices Installation: 
 Side Panel: Tempered Glass
 Weight: 9.0 kg
 Dimensions (L x W x H): 48.0 x 21.5 x 48.5 cm

RGB Compatibility:

 Type: Addressable
 Ports: 8
 Manual Control: 14 Modes
 Mainboard Compatibility: MSI Mystic Light Sync,

ASUS Aura Sync, Gigabyte
RGB Fusion Ready,
ASRock Polychrome SYNC

 RGB Pinout: 5V-D-G & 5V-D-coded-G

I/O:

 USB 3.0 (Top): 2
 USB 2.0 (Top): 2
 Audio (Top): 

Maximum Drive Bays:

 3.5": 2
 2.5": 4

Fan Configuration:

 Front Panel: 3x 120 mm Fans (Pre-Installed) or

2x 140 mm Fans (Optional)

 Rear Panel: 2x 120 mm Addressable RGB LED Fans

(Pre-Installed) or 2x 140 mm Fans
(Optional)

Compatibility:

 Mainboard: Mini-ITX, Micro-ATX, ATX
 Max. Length

Graphics Cards: 32.3 cm*

 Max. Height

CPU Cooler: 16.5 cm

 Max. Length

Power Supply: 20.0 cm

 Max. Height Radiator

incl. Fan (Front): 6.4 cm

 Max. Height Radiator

incl. Fan (Rear): 6.0 cm

 Radiators (Optional): Up to 360 mm (Front Panel)

Up to 240 mm (Rear Panel)

Package Contents:

 REV220
 Accessory Set
 Manual

* 28.5 cm for the expansion slot (Mini-ITX) above the power supply tunnel.

www.sharkoon.com