CA300T
ATX PC CASE
CASE VERSIONS
BLACK EDITION WHITE EDITION
Futuristic front, noble design, and a sophisticated layout – that is the CA300T. The large, sturdy ATX tower from
our ELITE SHARK series is aimed at ambitious PC enthusiasts and is equipped with a range novel features.
Among these are a side-mounted RGB illuminated I/O panel, two tempered glass side panels, a hinged compartment for cabling as well as a three-layer top panel consisting of a ventilation opening, a magnetically
attached dust filter and a perforated top cover. The steel front panel casts an imposing figure with its impressive angular patterns, which is highlighted in front by three highly luminous RGB LED fans. As expected within
an ELITE SHARK case, there is also an enormous amount of space inside for powerful hardware and elaborate
PC builds.
8-PORT ADDRESSABLE RGB
CONTROLLER
The ELITE SHARK CA300T is supplied
with an 8-Port Addressable RGB Controller for digitally addressable LEDs.
With compatible mainboards, this will
function as a hub for up to eight
addressable LED components which,
via the mainboard software, will illuminate in up to 16.8 million colors.
SATA
Addressable RGB LED Fans/Strips
Addressable RGB LED Fans/Strips
V D G
VDG
or
+5V D G
Mainboard Addressable
RGB Pin Header
MANUAL COLOR CONTROL
For mainboards without headers for addressable RGB illumination, up to eight addressable LED
components can be directly illuminated and controlled via the 8-Port Addressable RGB Controller.
SATA
Addressable RGB LED Fans/Strips
Addressable RGB LED Fans/Strips
RESET SW
RGB
Mode 9
Blue White
RGB
Mode 8
RGB
Mode 13
RGB
Mode 12
RGB
Mode 11
Red Green
RGB
Mode 10
Twenty preset lighting modes can be
consecutively selected using the
dedicated RGB switch on the I/O panel
of the case. If desired, the illumination
can also be completely switched o.
Yellow Cyan Pink
RGB
RGB
Mode 6
Mode 7
RGB
Mode 5
RGB
Mode 4
RGB
Mode 1
RGB
Mode 2
RGB
Mode 3
EASY TO INTEGRATE
The pre-installed addressable RGB
fan and controller are certified
for Asus Aura Sync, MSI Mystic Light
Sync, Gigabyte Fusion and ASRock
Polychrome SYNC.
MSI ASUS ASROCK ASUSGIGABYTE
Sharkoon products marked with the "ADDRESSABLE RGB" logo are
compatible with mainboards which have headers for addressable RGB
LED fans and strips. The headers should have the pin configuration
5V-D-coded-G or 5V-D-G. Examples of these RGB connections from the
most important mainboard manufacturers are shown below. The RGB
pin configuration is independent of manufacturer. However,
the naming and marking of these connections may vary between
manufacturers. For further information concerning compatibility, refer
to the manual of your mainboard, or visit the manufacturer's website.
STYLISH SHOWCASE FOR
PREMIUM COMPONENTS
Hardware which has been built into an ELITE SHARK case deserves to be seen. Therefore, we have outfitted
the CA300T with two tempered glass side panels. The left side panel provides full insight into the interior of the
case so that installed components can be perfectly displayed. With the right side panel, the lowest area of the
tempered glass is tinted black so that the components inside the power supply tunnel do not distract from the
overall visual eect of the case. SSDs with RGB elements or imposing HDDs come here into their own. Cable
tangles don’t have a chance: Cabling can simply disappear inside a roomy cable compartment, which can be
opened and closed, as well as behind a movable cable cover.
OPTIONAL VERTICAL INSTALLATION
FOR GRAPHICS CARDS
The CA300 is designed for an optimal view of the
installed components. For classically mounted
graphics cards, an adjustable graphics card holder
with a rubber contact surface is pre-installed. For the
vertical installation of graphics cards, a separately
available Vertical Graphics Card Kit* has been
developed. This consists of an easily attachable
mount and a riser cable. The cable has been given
extra length to allow enough room for additional
expansion cards.
*Not included.
RGB ILLUMINATED
I/O CONTROL PANEL
A special detail of the CA300T can be found on its already impressive
front. Instead of positioning the I/O panel on the top of the case, as per
common designs, we have placed it on the side. Buttons and connectors are now particularly easy to reach when the case is presented
standing on a table. In addition to the usual audio and USB ports, we
have also outfitted the CA300T case with a USB Type-C port. The
finishing touch is that the side positioned I/O panel is given its own
RGB illumination.
Power Button
RGB Switch
USB 3.0
Audio
Type-C
(USB 3.2 Gen 2)
ELITE, STEEL
APPEARANCE
The expressive front panel with its pattern of geometrically designed openings, lends the PC case a
futuristic style and makes the CA300T an immediate
eye-catcher. In addition, the application of highquality materials completes the impression of
elegance: the top panel has been manufactured with
solid metal and the steel front panel is set within a
frame made of diamond-cut aluminium. The three
RGB-LED fans provide colorful highlights and shine
through the pattern of the front panel. An additional
RGB LED fan on the rear panel adds more illumination
to the inside of the case.
PERFECT FOR SYSTEM COOLING
The cases of the ELITE SHARK series have been especially developed for high performance hardware builds.
With up to seven locations for fans, the cases oer enough possibilities for customized airflow solutions. The full
tower is more than ready for demanding water cooling systems due to its pre-installed mount for a reservoir and
pump and the dedicated extra-long slots for easy installation. At the front, the case can take radiators with a giant
420 mm, and radiators up to 360 mm will find room under the top panel. If needed, a 120 mm radiator can be
installed, replacing the pre-installed fan on the rear panel.
Max. Size Radiator: 360 mm
Max. Size Radiator: 120 mm
Radiator Front Panel:
420 mm
360 mm
280 mm
240 mm
140 mm
120 mm
Radiator Top Panel:
360 mm
Max. Size Radiator: 420 mm
280 mm
240 mm
140 mm
120 mm
Radiator Rear Panel:
120 mm
LARGE, STURDY TOWER
WITH PLENTY OF SPACE
50.5 cm
Adjustable Graphics
Card Holder
52.0 cm
16.5 cm
Max. Length Graphics Card: 42.5 cm
SSD SSD
Cable Cover
Cable Pass-Throughs
SSD
Water Cooling Pump or SSD Holder
Removable Dust Filter
Hinged Cable Compartment
8-Port Addressable
RGB Controller
HDD/SSD
HDD/SSD
HDD HDD
SSD
Max. Length
Power Supply: 24 cm
SSD
When it comes to enough room for
high-quality PC builds, the CA300T
makes no compromises. The interior is
spacious and has a well-designed
layout to support complex systems.
Large graphics cards with a length up to
42.5 cm, power supplies up to 24 cm
long, and CPU coolers with a height of
16.5 cm will all easily find space inside.
Additionally, up to seven 2.5" or four 3.5"
drives can be installed into the solid
case.
CONSTANT AIRFLOW
FOR FULL POWER
Three pre-installed 120 mm RGB LED fans in the front and one in the rear provide the CA300T with a constant
airflow. So that plenty of air can flow through the case, the front panel is equipped with a mesh grille. The top
of the case even oers a complete opening with a perforated cover for fans and radiators.
10
8
2
9
3
2
1
6
5
4
8
1
4x 120 mm Addressable RGB LED Fans
2
Tempered Glass Side Panel
3
Hinged Cable Compartment
Metal Front Plate
4
Dust Filter
5
7
6
Aluminium Frame
7
Stable Case Feet
8
Removable Dust Filter
9
Top Panel with Ventilation Opening
10
Perforated Top Cover
Specifications
General:
Color Versions: Black / White
Form Factor: ATX / E-ATX
Expansion Slots: 8
Interior Painting:
Cable Management System:
Water Cooling Pump Holder:
Side Panel: 2x Tempered Glass
Weight: 14.7 kg
Dimensions (L x W x H): 50.5 x 23.5 x 52.0 cm
RGB Compatibility:
Type: Addressable
Ports: 8
Manual Control: 20 Modes
Mainboard Compatibility: MSI Mystic Light Sync,
ASUS Aura Sync, Gigabyte
RGB Fusion Ready,
ASRock Polychrome SYNC
RGB Pinout: 5V-D-G & 5V-D-coded-G
I/O:
Typ-C (USB 3.2 Gen 2) (Left): 1
USB 3.0 (Left): 2
Audio (Left):
Maximum Drive Bays:
3.5": 4
2.5": 7
Fan Configuration:
Front Panel: 3x 120 mm Addressable RGB
LED Fans (Pre-Installed)
or 3x 140 mm Fans (Optional)
Rear Panel: 1x 120 mm Addressable RGB
LED Fan (Pre-Installed)
Top Panel: 3x 120 mm or
2x 140 mm Fans (Optional)
Compatibility:
Mainboard: Mini-ITX, Micro-ATX,
ATX, E-ATX
Max. Length Graphics Cards: 40.0 / 42.5 cm*
Max. Height CPU Cooler: 16.5 cm
Max. Length Power Supply: 24.0 cm
Max. Height Radiator
incl. Fan (Front): 5.7 cm
Max. Height Radiator
incl. Fan (Top): 6.0 cm
Radiators (Optional): Up to 420 mm (Front Panel)
Up to 360 mm (Top Panel)
Up to 120 mm (Rear Panel)
Package Contents:
ELITE SHARK CA300T
Accessory Set
Manual
* Without front fan.
CA300T
ATX PC CASE
www.sharkoon.com
Loading...