CASE VERSIONS
The CA200 ATX full tower from the ELITE SHARK series has been designed for a variety of applications and is
available in two variants. The CA200G has a front panel element made of tempered glass. The glass is dark and
reflective and is thus reminiscent of black obsidian. It allows the lighting of the integrated LED strips to reach
its full effect and accentuates the elegance of the case. The CA200M, on the other hand, has a front panel with
an integrated mesh element, underscoring the ability of the ELITE SHARK series to perform: The air-permeability of the mesh structure can enhance the intake of cool air, thus providing an even better airflow.
8-PORT ADDRESSABLE RGB
CONTROLLER
The ELITE SHARK CA200 is supplied with
an 8-Port Addressable RGB Controller for
digitally addressable LEDs. With compatible mainboards, this will function as a
hub for up to eight addressable LED components which, via the mainboard
software, will illuminate in up to 16.8
million colors.
SATA
Addressable RGB LED Fans/ Strips
5V
D G5VD G
5V
D G5VD G5VD G5VD G
D G5VD G
Addressable RGB LED Fans/ Strips
V D G
VDG
or
+5V D G
Mainboard Addressable
RGB Pin Header
5V
MANUAL COLOR CONTROL
For mainboards without headers for addressable RGB illumination, up to eight addressable LED
components can be directly illuminated and controlled via the 8-Port Addressable RGB Controller.
Yellow Cyan Pink
RGB
RGB
Mode 6
Mode 7
RGB
Mode 5
RGB
Mode 4
RGB
Mode 1
RGB
Mode 2
RGB
Mode 3
RGB
Mode 9
Blue White
RGB
Mode 8
SATA
Addressable RGB LED Fans/ Strips
5V
D G5VD G
5V
D G5VD G5VD G5VD G
Addressable RGB LED Fans/ Strips
D G5VD G
Red Green
RGB
Mode 13
RGB
5V
+
RGB SW
-
Mode 12
RGB
Mode 11
RGB
Mode 10
Twenty preset lighting modes can be
consecutively selected using the dedicated
illumination switch on the top panel of the
case. If desired, the illumination can also
be completely switched off.
EASY TO INTEGRATE
The pre-installed SHARK Blades RGB
Fan and the optionally available
SHARK Blades RGB Strip are certified
for Asus Aura Sync, MSI Mystic Light
Sync, Gigabyte Fusion and ASRock
Polychrome SYNC. SHARK Blades
fans and strips can thus be easily
incorporated into existing systems.
MSI ASUS ASROCK ASUSGIGABYTE
Sharkoon products marked with the "ADDRESSABLE RGB" logo are
compatible with mainboards which have headers for addressable RGB
LED fans and strips. The headers should have the pin configuration
5V-D-coded-G or 5V-D-G. Examples of these RGB connections from the
most important mainboard manufacturers are shown below. The RGB
pin configuration is independent of manufacturer. However,
the naming and marking of these connections may vary between
manufacturers. For further information concerning compatibility, refer
to the manual of your mainboard, or visit the manufacturer's website.