Page 1
Vertical
Vertical
Graphics Card Kit
Graphics Card Kit
for ELITE SHARK CA200 series
Page 2
MAKE YOUR GRAPHICS VISIBLE
The Sharkoon Vertical Graphics Card Kit allows graphics cards to be vertically mounted quickly and easily.
Illuminated graphics cards can thus be optimally presented from their best side! The installation kit was especially developed for the ELITE SHARK series and consists of a mount for the graphics card and an extra-long
riser cable. The mount is simply screwed onto the power supply tunnel, and the riser cable is then connected
to the mainboard and the graphics card.
Page 3
SIMPLE INSTALLATION
The Vertical Graphics Card Kit finds the perfect fit in ELITE SHARK cases as it has been especially designed for
this series. Due its practical design, vertical graphics cards are quickly ready to use.
EXTRA-LONG RISER CABLE
The riser cable has been designed to be especially long and
flexible. It can thus be installed over the space needed for
any horizontally mounted add-on cards. The expansion slots
for these thus remain free and can be used even after a
graphics card has been mounted vertically.
Page 4
SPECIFICATIONS
General:
Material: Metal (Graphics Card Holder)
PCIe Support: PCIe 3.0
PCIe Slot Compatibility: x16
Max. Data Transfer Rate: 8 Gbit/s
Gold-Plated Connectors:
Cable Length: 28 cm
Package Contents:
Graphics Card Holder (for ELITE SHARK CA200 series)
PCIe 3.0 x16 Riser Cable
Mounting Screws
Vertical
Graphics Card Kit
for ELITE SHARK CA200 series
www.sharkoon.com
Loading...