Shark Steam Pocket S3501 N2 11,S3501BB N,Steam Pocket S3501BB N 11 Owner's Manual

S3501 N2
S3501BB N

OWNER’S GUIDE

WWW.SHARKCLEAN.COM

S3501_N2_S3501BB_N_11_IB_ENG_111020_2.indd 1 11-10-20 1:14 PM

TOLL FREE: 1 -8 00 -798 -7398

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING YOUR SHARK®
STEAM MOP, BASIC SAFETY
PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS
BEFORE USING YOUR
STEAM MOP.

DANGER OF SCALDING.

Please use caution when
using the Steam Mop. The steam
emitted from the Steam Mop is
very hot.

POLARIZED PLUG:

This appliance has a polarized
plug (one blade is wider than
the other). As a safety feature,
this plug will fit into a polarized
outlet only one way. If the plug
does not fit fully into the outlet,
reverse the plug. If it still does
not fit, contact a qualified
electrician. Do not attempt to

defeat this safety feature.

WARNING:

TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY:

1. Use the system only for its
intended use.

2. DO NOT use outdoors.

3. DO NOT leave the appliance
unattended when plugged in.
Always unplug the power cord
from the electrical outlet when not
in use and before servicing.

4. DO NOT allow to be used as a toy.
DO NOT allow the appliance to be
used by children. Close attention
is necessary when used by or near
children, pets or plants.

5. Use only as described in this
manual.

6. Use only manufacturer’s
recommended accessories.

7. DO NOT operate the appliance
with a damaged plug or cord, or
if the unit has been dropped or
damaged. To avoid the risk of
electric shock, do not disassemble
or attempt to repair the appliance
on your own. Return the appliance
to EURO-PRO Operating LLC for
examination and repair. Incorrect
re-assembly or repair can cause
a risk of electrical shock or injury
to persons when the appliance is
used.

8. To protect against a risk of electric
shock, DO NOT immerse the Steam
Mop into water or any other liquids.

9. DO NOT handle plug or Steam
Mop with wet hands or operate
appliance without shoes.

10. DO NOT pull or carry by power
cord, use power cord as handle,
close a door on the power cord, or
pull the power cord around sharp
edges or corners. Keep power cord
away from heated surfaces.

S3501_N2_S3501BB_N_11_IB_ENG_111020_2.indd 2 11-10-20 1:14 PM

www.sharkclean.com

11. DO NOT unplug by pulling on
power cord. To unplug, grasp the
plug not the power cord. Do not
use extension cords or outlets
with inadequate current carrying
capacity.

12. DO NOT put any objects into
openings. Do not use with any
opening that is blocked.

13. DO NOT put hands or feet under
the Steam Mop. Unit gets very hot.

14. Use ON LY on flat, horizontal
surfaces. Do not use on walls,
counters or windows.

15. DO NOT use on leather, wax
polished furniture or floors,
synthetic fabrics, velvet or other
delicate, steam sensitive materials.

16. DO NOT add cleaning solutions,
scented perfumes, oils or any other
chemicals to the water used in this
appliance as this may damage the
unit or make it unsafe for use. If
you live in a hard water area, we
recommend using distilled water in
your Steam Mop.

17. When in use, NEVER turn the
appliance over or on its side.

NEVER DIRECT STEAM TOWARDS
PEOPLE, ANIMALS OR PLANTS.

18. NEVER LEAVE THE STEAM MOP
IN ONE SPOT ON ANY SURFACE
FOR ANY PERIOD OF TIME WHEN
MICRO-FIBER PAD IS ATTACHED
AS THIS WILL DAMAGE YOUR
FLOORS.

19. Carefully remove the micro-fiber
cleaning pad immediately after you
have unplugged and allowed the
Steam Mop to cool.

20. When cleaning the Steam Mop,
unplug the power cord from the
electrical outlet and clean with a
dry or damp cloth. Do not pour
water or use alcohol, benzene or
paint thinner on the unit.

21. Extreme caution should be
exercised when using this
appliance to clean stairs.

22. Never use the Steam Mop without
micro-fiber cleaning pad attached.

23. Keep your work area well lit.

24. Store the Steam Mop indoors in a
cool, dry place.

25. To avoid circuit overload, do not
operate another appliance on the
same socket (circuit) as the steam
cleaner.

26. If an extension cord is absolutely
necessary, an extension cord rated
a minimum of 15 ampere, 14 gage
cord should be used. Cords rated
for less amperage may overheat.
Care should be taken to arrange
cord so that it cannot be pulled or
tripped over.

27. DO NOT store unit with damp/wet
micro-fiber Steam Pocket® pocket
attached. Never leave the Steam

Pocket® Mop in one spot on any

surface for any period of time with
a damp or wet micro-fiber Steam

Pocket® pocket attached as this

will damage your floors.

28 Always unplug and allow the Steam

Mop to cool before removing or
changing mop heads.

WARNING: Your Steam Mop

is designed to clean hard floor
surfaces that will withstand high
heat. Do not use on unsealed wood
or unglazed ceramic floors. On
surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by the
heat and steam action. It is always
recommended to test an isolated
area of the surface to be cleaned
before proceeding. We also
recommend that you check the use
and care instructions from the floor
manufacturer.

SAVE THESE
INSTRUCTIONS

S3501_N2_S3501BB_N_11_IB_ENG_111020_2.indd 3 11-10-20 1:14 PM

TOLL FREE: 1 -8 00 -798 -7398

FILL

4 Lay the mop on the floor or on

a counter top and remove the
water tank cap by turning counter
clockwise. Fill the water tank using
the filling flask. Do not overfill the
water tank. Replace the water cap
and tighten.

IMP O R TANT: Make sure your floors

are sealed. Before using the Steam

Pocket® Mop consult page 4 for

more information.

Quick Start

2

4

3

1

ASSEMBLE

1 Insert the mop handle into the

pump actuator (the tube that leads
to the tank). Push the mop handle
and pump actuator together in
until you hear it click into place.

2 Select a cleaning pad. Fit one side

of the pocket onto the head first,
then using the lavender loop, pull
the pocket over the head. Attach
the quick fasteners on the top of
the pocket to secure in place.

3 Snap the mop head into the base to

secure it. Press the release button
to exchange mop heads.

When assembling your Steam Pocket®
Mop there may be a little water in or
around the water tank. This is because
we test all our Steam Pocket® Mops
100% before you buy them, so you get
a quality Shark® Steam Pocket® Mop.

S3501_N2_S3501BB_N_11_IB_ENG_111020_2.indd 4 11-10-20 1:14 PM

www.sharkclean.com

PREPARE

5 For your comfort, you can adjust

the height of the mop. Just lift the
latch on the tube 90 degrees to the
open position. Holding the handle,
extend the tube to the height that’s
right for you and then close latch
to locked position.

6 Plug in mop and wait 30 seconds

or less for the mop to heat up.
Pump the handle of the mop by
pushing downward about 10 to 12
times to create steam.

NOTE: Steam is created

automatically when you start
mopping.

DIRT CAN’T HIDE ON
EITHER SIDE! All new

design allows for optimal
cleaning! When one side
of the pocket gets dirty,
just turn the mop head
over and clean with the
other side of the pocket.

5

6

Quick Start

QUICK TIP:
For easier
pushing
and pulling,
extend the
handle length.

NOTE: Do not leave your

Steam Pocket® Mop

unattended during use.

IMP O R TANT: Never leave

the Steam Pocket® Mop in
one spot for any period of
time with a damp or wet

micro-fiber Steam Pocket®
attached as this will damage
your floors.

S3501_N2_S3501BB_N_11_IB_ENG_111020_2.indd 5 11-10-20 1:14 PM

TOLL FREE: 1 -8 00 -798 -7398

This manual covers model number:

S3501 N2 11
S3501BB N 11

TECHNICAL SPECIFICATIONS

Voltage: 120V., 60Hz.

Power: 1550 Watts

Water Capacity: 450 ml (15 oz.)

S3501_N2_S3501BB_N_11_IB_ENG_111020_2.indd 6 11-10-20 1:14 PM