Shark Steam Blaster EP905 Use And Care Instructions Manual

IMPORTANT SAFETY INSTRUCTIONS

PROFESSIONAL

When using your EURO-PRO Professional Shark Steam Blaster, basic safety
precautions should always be observed, including the following:

To reduce the risk of fire, electric shock, or
injury:

• Do not leave the Professional Shark Steam
Blaster plugged in when unattended. Unplug
the electrical cord when not in use and before
servicing or refilling water tank.

• Do not allow to be used as a toy. Close
attention is necessary when used by or near
children, pets or plants.

• Use only as described in this manual. Use
only manufacturer’s recommended
accessories.

• Do not pull cord, use cord as a handle, close
a door on cord, or pull cord around sharp
edges or corners. Keep cord away from
heated surfaces.

• Do not use extension cords or outlets with
inadequate current carrying capacity.

• Turn off all controls as applicable before
unplugging from electrical outlet.

• Turn off all controls before unplugging from
electrical outlet.

• Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.

• Do not handle plug or steam cleaner with wet
hands or operate without shoes.

• Do not put any objects into openings. Do not
use with any opening blocked.

• Store your appliance indoors in a cool, dry
area.

• Keep your work area well lit.

• When in use, never turn the appliance over

or on its side. Never direct steam towards
people, animals or plants.

• Do not immerse the steam cleaner into water
or other liquids. Always unplug the power
cord from the electrical socket when filling the
steam cleaner.

• Do NOT

add cleaning solutions, scented
perfumes, oils or any other chemicals to
the water used in this appliance as this
may damage the unit or make it unsafe for
use. Use regular tap water or distilled/purified

water if the tap water in your area is very hard.

1. Read all instructions before using your
Professional Shark Steam Blaster.

2. Use the system only for its intended use.

3. To protect against a risk of electric shock,
do not immerse any part of the system in
water or other liquids.

4. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to
disconnect.

5. Do not allow cord to touch hot surfaces.
Let the system cool completely before
putting away or before opening the water
tank (removing the safety cap) . Wrap
power cord loosely around your system
when storing.

6. Always disconnect system from electrical
outlet when filling or emptying water tank
and when not in use.

7. Do not operate the system with a damaged
cord or plug, or if the appliance or any other
part of the system has been dropped or
damaged. To avoid the risk of electric
shock, do not disassemble or attempt to
repair the Professional Shark Steam
Blaster. Return the system to EURO-PRO
Corporation (see warranty) for examination
and repair. Incorrect re-assembly or repair
can cause a risk of electrical shock or injury
to persons when the Professional Shark
Steam Blaster is used.

8. Close supervision is necessary for any
appliance being used by or near children.
Do not leave the system unattended while
connected.

9. Burns can occur from touching hot metal
parts, hot water or steam. Do not turn
upside down as there may be hot water in
the unit. Never direct steam at any person.
The steam is very hot and can cause burns.

10. Do not operate in the presence of
explosive and/or flammable fumes.

11. This appliance is intended only for
household use. Follow all user instructions
in this manual.

12. Never use any chemicals or substance
other than tap water in the machine. Use of
chemicals may damage the machine. Use
of chemicals will automatically void your
warranty.

USE AND CARE INSTRUCTIONS

Model EP905

115V~, 60Hz., 1500 Watts

For information or assistance:

USA: EURO-PRO Corporation Canada: EURO-PRO Corporation

178 West Service Rd. 4400 Bois Franc
Champlain, NY 12919 St. Laurent, QC H4S 1A7

Tel: 1 866 98SHARK (1 866 987-4275)

SAVE THESE INSTRUCTIONS

For Household Use Only

www.sharkvac.com

Rev. 08/02A

1

GETTING TO KNOW YOUR PROFESSIONAL SHARK

STEAM BLASTER

ADDITIONAL IMPORTANT SAFEGUARDS cont.

1. To avoid circuit overload, do not operate another appliance on the same socket (circuit)

2. If an extension cord is absolutely necessary, a 15 ampere 14 gage cord should be used.
Cords rated for less amperage may overheat. Care should be taken to arrange cord so
that it cannot be pulled or tripped over.

3. Do not leave unattended when the system is connected to a power supply/electrical outlet.

12

(Shown Fitted to

Rectangular

Brush)

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

WARNING: This appliance is equipped with a

grounded-type 3-wire cord (3-prong
plug). This plug will only fit into an
electrical outlet made for a 3-prong
plug. This is a safety feature. If the
plug should fail to fit the outlet, contact
an electrician to replace the outlet. Do
not attempt to defeat the safety
purpose of the grounding pin, part of
the 3-prong plug.

1. On/Off Switch

2. Temperature Ready Light (Green)

3. Power “On” Light (Amber)

4. Rectangular Floor/Carpet Brush

5. Extension Tubes (2)

6. Flexible Steam Hose
6A. Pistol Grip

7. Safety/Filler Cap

8. Small Detail Brush

9. Glass & Tile Squeegee

10. Concentrator Nozzle

11. Shoulder Strap

12. Angle Adapter

13. Filling Funnel

Technical Specifications

Voltage: 115V~ 60Hz.
Power: 1500 Watts
Water Capacity: 5 Cups
Max. Steam Temperature: 240°F
Steam Generator: Stainless Steel

2

3