WHEN USING YOUR SHARK®
STEAM MOP, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR SHARK® STEAM MOP.
DANGER OF SCALDING.
Please use caution when using the steam mop.
The steam emitted from the steam mop is very
hot.
POLARIZED PLUG:
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature,
this plug will fit into a polarized outlet only
one way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1. Use the system only for its intended use.
2. DO NOT use outdoors.
3. DO NOT leave the appliance unattended when
plugged in. Always unplug the power cord from
the electrical outlet when not in use and before
servicing.
4. DO NOT allow the appliance to be used by
children. Close attention is necessary when used
by or near children, pets or plants.
5. Use only as described in this manual.
6. Use only manufacturer’s recommended
accessories.
7. DO NOT use with damaged cord or plug. If
appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped
into water. Return the appliance to EURO-PRO
Operating LLC for examination and repair.
Incorrect re-assembly or repair can cause a risk
of electrical shock or injury to persons when the
appliance is used.
8. To protect against a risk of electric shock, DO NOT immerse the steam mop into water or any
other liquids.
9. DO NOT handle plug or steam mop with wet
hands or operate appliance without shoes.
10. DO NOT pull or carry by cord, use cord as a
handle, close a door on cord, or pull cord around
sharp edges or corners. Do not run appliance
over cord. Keep cord away from heated surfaces.
11. DO NOT unplug by pulling on power cord.
To unplug, grasp the plug not the power cord.
Do not use extension cords or outlets with
inadequate current carrying capacity.
S3901K_N_11_IB_E_120410_3.indd 212-04-10 11:40 AM
www.sharkclean.com
12. DO NOT put any objects into openings. Do not
use with any opening that is blocked.
13. DO NOT put hands or feet under the steam
mop. Unit gets very hot.
14. In mop mode use ONLY on flat, horizontal
surfaces. Do not use on walls, counters or
windows.
15. DO NOT use on leather, wax polished furniture
or floors, synthetic fabrics, velvet or other
delicate, steam sensitive materials.
16. DO NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to the
water used in this appliance as this may damage
the unit or make it unsafe for use. If you live in a
hard water area, we recommend using distilled
water in your steam mop.
17. When in use, NEVER turn the appliance over
or on its side. NEVER DIRECT STEAM
TOWARDS PEOPLE, ANIMALS OR
PLANTS.
18. NEVER LEAVE THE STEAM MOP IN
ONE SPOT ON ANY SURFACE FOR ANY
PERIOD OF TIME WHEN THE CLEANING
PAD IS ATTACHED AS THIS WILL
DAMAGE YOUR FLOORS.
19. Carefully remove the cleaning pad immediately
after you have unplugged and allowed the steam
mop to cool.
20. When cleaning the steam mop, unplug the
power cord from the electrical outlet and clean
with a dry or damp cloth. Do not pour water
or use alcohol, benzene or paint thinner on the
unit.
21. Extreme caution should be exercised when
using this appliance to clean stairs.
22. Never use steam mop without the cleaning
pad attached.
23. Keep your work area well lit.
24. Store steam mop indoors in a cool, dry
place.
25. To avoid circuit overload, do not operate
another appliance on the same socket
(circuit) as the steam cleaner.
26. If an extension cord is absolutely necessary,
an extension cord rated a minimum
of 15 ampere, 14 gage cord should be
used. Cords rated for less amperage may
overheat. Care should be taken to arrange
cord so that it cannot be pulled or tripped
over.
27 Always unplug and allow the steam mop
to cool before removing or changing mop
heads.
WARNING: Your steam mop is
designed to clean hard floor surfaces that
will withstand high heat. Do not use on
unsealed wood or unglazed ceramic floors.
On surfaces that have been treated with
wax or some no wax floors, the sheen
may be removed by the heat and steam
action. It is always recommended to test an
isolated area of the surface to be cleaned
before proceeding. We also recommend
that you check the use and care instructions
from the floor manufacturer.
When assembling your steam mop there may be a little water in or around the water tank. This is because we
test all our steam mops 100% before you buy them, so you get a quality Shark® Lift-Away™ Pro Steam Pocket® Mop.
a
d
b
c
e
f
g
a Mop Handle
b Steam Trigger
c Removable Handheld Steamer
d Handheld Steamer Housing
e All-Purpose Mop Head
f Assorted Two-Sided Cleaning Pads for the
All-Purpose Mop Head
g Carpet Glider
h Triangle Mop Head
i Two-Sided Cleaning Pads for the
Triangle Mop Head
2
j
l
n
h
q
m
o
r
i
j Accessory Hose
k Direct Steam Nozzle
l Flat Scrubber Tool
m All-Purpose Scrubber Pad for Flat Scrubber Tool
n Garment Steamer and Bristle Frame
o Garment Steamer Bonnet
p Upholstery Bonnet
q Filling Flask
r (1) 6mm x 48mm Large Screw*
*Phillips or flat head screwdriver can
be used. Screwdriver not included.
k
p
S3901K_N_11_IB_E_120410_3.indd 212-04-10 11:40 AM
www.sharkclean.com
Fig. 1
Fig. 4
Fig. 2
Fig. 3
ACCESSORIES:
DIRECT STEAM NOZZLE
Loosen and dislodge compact dirt found in corners
or tight places. (Fig. 1)
GARMENT STEAMER & BRISTLE FRAME
This is ideal for removing wrinkles from clothing and
freshening and grooming upholstery. (Fig. 2)
FLAT SCRUBBER TOOL with ACCESSORY HOSE
Use with the accessory hose to clean a variety of
surfaces such as counter tops, walls, mirrors,and
windows. (Fig. 3)
Fig. 5
Fig. 6
CONTROLS:
STEAM TRIGGER
When using the Handheld Steamer, press and hold
the steam trigger to start steaming. (Fig. 4)
STEAM SETTINGS
The Lift-Away™ Pro Steam Pocket® Mop
has three unique settings that can be used when
mopping your floors or with the handheld unit.
(Fig. 5)
ON/STEAM SETTING
Press the ON/STEAM SETTING button to
select the type of cleaning that you want. (Fig. 6)
3
S3901K_N_11_IB_E_120410_3.indd 312-04-10 11:40 AM
TOLL F REE: 1 -800 -798-739 8
Getting Started with Your Steam Mop
fig. 1fig. 2
IMPORTANT: Always make sure the mop is
UNPLUGGED from the wall when not in use.
Never fill the mop, attach the mop head, change
or remove the cleaning pad when the mop is
plugged into the wall. To prolong the life of your
Shark® Lift-Away™ Pro Steam Pocket®
Mop we recommend using distilled water. Make
sure you only add water to the tank. Chemicals
or cleaning solution may damage the appliance
and could be unsafe for you and your family.
4
S3901K_N_11_IB_E_120410_3.indd 412-04-10 11:40 AM
STEAM MOP ASSEMBLY
1 Insert the Mop Handle end labeled “Front” into
the Steam Mop Housing. Make sure it is inserted
past the line printed on the pole. Secure the
assembled handle and pole by using the large
screw and a Phillips or a flat head screw driver
(screwdriver not included). (fig. 1)
2 Insert the Handheld Steamer into the Steam Mop
Housing. (fig. 2)
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.