IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
For Household Use Only
WHEN USING YOUR SHARK®
STEAM MOP, BASIC SAFETY
PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
STEAM MOP.
DANGER OF SCALDING.
Please use caution when
using the steam mop. The steam
emitted from the steam mop is
very hot.
POLARIZED PLUG:
This appliance has a polarized
plug (one blade is wider than
the other). As a safety feature,
this plug will fit into a polarized
outlet only one way. If the
plug does not fit fully into the
outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician. Do not attempt to
defeat this safety feature.
WARNING:
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY:
1. Use the system only for its
intended use.
2. DO NOT use outdoors.
3. DO NOT leave the appliance
unattended when plugged in.
Always unplug the power cord
from the electrical outlet when not
in use and before servicing.
4. DO NOT allow to be used as a toy.
DO NOT allow the appliance to be
used by children. Close attention
is necessary when used by or near
children, pets or plants.
5. Use only as described in this
manual.
6. Use only manufacturer’s
recommended accessories.
7. DO NOT operate the appliance
with a damaged plug or cord, or
if the unit has been dropped or
damaged. To avoid the risk of
electric shock, do not disassemble
or attempt to repair the appliance
on your own. Return the appliance
to EURO-PRO Operating LLC for
examination and repair. Incorrect
re-assembly or repair can cause
a risk of electrical shock or injury
to persons when the appliance is
used.
8. To protect against a risk of electric
shock, DO NOT immerse the steam
mop into water or any other liquids.
9. DO NOT handle plug or steam
mop with wet hands or operate
appliance without shoes.
S3452_11_ENG_IB_120515_1.indd 212-05-16 10:10 AM
English
www.sharkclean.com
10. DO NOT pull or carry by power
cord, use power cord as handle,
close a door on the power cord, or
pull the power cord around sharp
edges or corners. Keep power cord
away from heated surfaces.
11. DO NOT unplug by pulling on
power cord. To unplug, grasp the
plug not the power cord. Do not
use extension cords or outlets
with inadequate current carrying
capacit y.
12. DO NOT put any objects into
openings. Do not use with any
opening that is blocked.
13. DO NOT put hands or feet under
the steam mop. Unit gets ver y hot.
14. Use ONLY on flat, horizontal
surfaces. Do not use on walls,
counters or windows.
15. DO NOT use on leather, wax
polished furniture or floors,
synthetic fabrics, velvet or other
delicate, steam sensitive materials.
16. DO NOT add cleaning solutions,
scented perfumes, oils or any other
chemicals to the water used in this
appliance as this may damage the
unit or make it unsafe for use. If
you live in a hard water area, we
recommend using distilled water in
your steam mop.
17. When in use, NEVER turn the
appliance over or on its side.
NEVE R DIRECT STEAM TOWARDS
PEOPLE, ANIMAL S OR PL ANTS .
18. NEVE R LEAVE THE STEAM M OP
IN ONE SPOT ON ANY SURFACE
FOR ANY PERIOD OF TIME WHEN
MICRO -FIBER PAD IS ATTACHED
AS THIS WILL DAMAGE YOUR
FLOORS.
19. C arefully remove the micro-fiber
cleaning pad immediately after you
have unplugged and allowed the
steam mop to cool.
20. When cleaning the steam mop,
unplug the power cord from the
electrical outlet and clean with a
dry or damp cloth. Do not pour
water or use alcohol, benzene or
paint thinner on the unit.
21. Extreme caution should be
exercised when using this
appliance to clean stairs.
22. Never use steam mop without
micro-fiber cleaning pad attached.
23. Keep your work area well lit.
24. Store steam mop indoors in a cool,
dry place.
25. To avoid circuit overload, do not
operate another appliance on the
same socket (circuit) as the steam
cleaner.
26. If an extension cord is absolutely
necessary, an extension cord rated
a minimum of 15 ampere, 14 gage
cord should be used. Cords rated
for less amperage may overheat.
Care should be taken to arrange
cord so that it cannot be pulled or
tripped over.
27 Always unplug and allow the steam
mop to cool before removing or
changing mop heads.
WARNING: Your steam
mop is designed to clean hard
floor surfaces that will withstand
high heat. Do not use on unsealed
wood or unglazed ceramic floors.
On surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by the
heat and steam action. It is always
recommended to test an isolated
area of the surface to be cleaned
before proceeding. We also
recommend that you check the use
and care instructions from the floor
manufacturer.
When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test 100%
our steam mops to ensure the quality
of your Shark® Professional SLIM
Steam Pocket® Mop.
d
a
b
c
e
f
a Steam Mop Body
b Mop Handle
c All-Purpose Mop Head ( 1)
d Filling Flask
e Two-Sided Micro-Fiber Cleaning Pads
for the All-Purpose Mop Head (2)
f (1) 6mm x 52mm Large Screw*
*Phillips or flat head screwdriver can be
used. Screwdriver not included.
g
h
i
j
k
g Quick Release Swivel Cord Wrap
h Cord Clips
i Water Tank
j Steam Control Button
k Mop Head Release Button
2
S3452_11_ENG_IB_120515_1.indd 212-05-16 10:10 AM
English
www.sharkclean.com
fig. 1
IMPORTANT: Always make sure the
mop is UNPLUGGED from the wall
when not in use. Never fill the mop,
attach the mop head, change or
remove the micro-fiber cleaning pad
when the mop is plugged into
a power outlet. To prolong the life
of your Shark® Professional SLIM
Steam Pocket® Mop, we recommend
ASSEMBLE
1 Insert the Mop handle end labeled
“Front” into the steam mop body.
Make sure it is inserted past the
line printed on the pole. Secure the
assembled handle and pole by using
the large screw and a Phillips or a flat
head screwdriver (screwdriver not
included). (fig. 1)
using distilled water. Make sure
you only add water to the tank.
Chemicals or cleaning solutions may
damage the appliance and could be
unsafe for you and your family.
3
S3452_11_ENG_IB_120515_1.indd 312-05-16 10:10 AM
TOLL F REE : 1-8 0 0 -798 -7 39 8
Getting Started - cont’d
fig. 2
fig. 3
2 Use the lavender loop on the side of
the micro-fiber cleaning pad to slide
the mop head into the pad pocket.
Then secure the quick fasteners on
the top of the pocket to lock in place.
(fig. 2)
3 Snap the mop head into the base to
secure it. (fig. 3)
4 Open the water tank door. (fig. 4)
Use the filling flask and pour water
into the tank. Do not overfill. Press
the water tank door firmly to close.
(fig. 5)
fig. 4
fig. 5
IMPORTANT: Do not use on unsealed
wood or unglazed ceramic floors.
On surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by
the heat and steam action. It is
always recommended to test an
isolated area of the surface to be
cleaned before proceeding. We
recommend that you check the use
and care instructions from the floor
manufacturer.
4
S3452_11_ENG_IB_120515_1.indd 412-05-16 10:10 AM
English
www.sharkclean.com
s
t
e
a
m
c
o
n
t
r
o
l
Using Your Steam Mop
IMPORTANT: Do not use the mop
without attaching a micro-fiber
cleaning pad and adding water to the
tank first.
fig. 7
fig. 6
IMPORTANT: Sweep or vacuum your
floors prior to cleaning with your Steam
Mop.
Visit www.sharkclean.com for other
great quick cleaning products to
complement your Steam Mop, such as
the Shark® Navigator™ Lift-Away
®
(model NV350).
S3452_11_ENG_IB_120515_1.indd 512-05-16 10:10 AM
1 Pull and twist the quick release cord
holder to unwrap the power cord
completely. Plug into a 120-volt electrical
outlet. (fig. 6)
2 The STEAM CONTROL button will
flash blue. If the light does not turn
on, reference the troubleshooting
section on page 10. (fig. 7)
5
TOLL F REE : 1-8 0 0 -798 -7 39 8
s
te
a
m
c
o
n
t
r
o
l
Using Your Steam Mop - cont’d
fig. 8
3 Press the STEAM CONTROL button once
to activate the steam. The light turns solid
blue when the unit is steaming (fig. 8 & 7)
NOTE: It may take up to 30 seconds for
your mop to heat up and begin steaming.
When you are using the mop for the first
time, it might take longer than the normal
30 seconds to start steaming.
fig. 9
4 Clean your floors with a forward and
backward motion. (fig. 9)
To stop the steam press the
STEAM CONTROL button until
the LED light turns flashing blue.
6
S3452_11_ENG_IB_120515_1.indd 612-05-16 10:10 AM
English
www.sharkclean.com
Using Your Steam Mop - cont’d
fig. 10
5 When one side of the micro-fiber
cleaning pad gets dirty, just flip the
mop over and you can quickly start
using the other side. (fig. 10)
6 When the water tank is empty, the
steam mop will stop producing
steam. You can refill the water
NOTE: Please wait 2-3 minutes for
the Steam Mop to cool off before
removing the mop head or the
micro-fiber cleaning pad. Never leave
the steam mop with a damp/wet
micro-fiber cleaning pad on
any floor.
tank at any time as long as the
mop is unplugged from the outlet.
Reference the filling instructions
from page 4.
7
S3452_11_ENG_IB_120515_1.indd 712-05-16 10:10 AM
TOLL F REE : 1-8 0 0 -798 -7 39 8
Care of Your Steam Mop
fig. 11
fig. 12
AFTER USE AND STORAGE
1 When you have finished using
the steam mop, press the STEAM
CONTROL button until the LED light
turns flashing BLUE. This stops the
unit from steaming. Unplug the cord
from the outlet and place the mop
into the upright position. Let the unit
cool for 2-3 minutes.
Remove the micro-fiber cleaning pad
2 Empty the water tank before
storage. Open the water tank door
and empty the tank over a sink.
Close the water cap. (fig. 12)
3 To store the Shark® Professional SLIM
Steam Pocket® Mop hanging up, first
remove the head (after it has cooled
and the steam has been released)
then hang on a large hook. (fig. 13)
fig. 13
by releasing the quick fasteners and
using the lavender loop on the side
of the pocket, avoiding contact with
the hot pad or dirt. (fig. 11)
8
S3452_11_ENG_IB_120515_1.indd 812-05-16 10:10 AM
English
www.sharkclean.com
To order additional parts
and accessories, visit
www.SharkClean.com
or call 1-800-798-7398.
fig. 14
fig. 15
CARE OF YOUR MICRO-FIBER
CLEANING PAD
1 We recommend washing your
micro-fiber cleaning pad separately
from other fabrics to avoid picking
up lint. Only use liquid detergent
(no powder detergent). Do not use
any fabric softeners or bleach. Line
dry or dry on a low dryer setting.
(fig. 14)
2 If there are loose threads on the
micro-fiber cleaning pad carefully
cut the thread with scissors. Do not
pull on them or cut at the base.
(fig. 15)
fig. 16
DECALCIFYING YOUR STEAM MOP
Calcium and mineral deposits can
build up and impact the performance
of your steam mop over time.
To extend the life of your product
we recommend that you use
distilled water or Shark®’s
Water Filtration Bottle.
Visit www.SharkClean.com to order
(model XTWFBOI).
CLEANING THE NOZZLE
Your steam mop should not
normally require cleaning, however,
should you notice a decrease in the
steam output, it may be necessary
to remove mineral deposits built up
around the nozzle.
1 Unplug the steam mop from the
electrical outlet.
2 Use a small diameter stiff metal
wire, such as a straightened metal
paperclip, and carefully insert the
end of thewire into the nozzle
orifice. (fig. 16)
3 Move the wire back and forth several
times to remove any deposits.
4 Plug the steam mop in to the power
outlet and test steam output.
9
S3452_11_ENG_IB_120515_1.indd 912-05-16 10:10 AM
TOLL F REE : 1-8 0 0 -798 -7 39 8
Troubleshooting Guide
PROBLEMPOSSIBLE REASONS & SOLUTIONS
The Professional SLIM
Steam Pocket® Mop will
not turn-on.
The unit will not make
steam.
Cannot activate steam
flashing blue light
remains on.
The Professional SLIM
Steam Pocket® Mop
leaves water on the
floor.
The Professional SLIM
Steam Pocket® Mop
left a white spot on the
floor.
There is a square block
in my water tank.
Floors are cloudy,
streaky or spotty after
steaming.
The Professional SLIM
Steam Pocket® Mop is
hard to push.
Your steam mop should be securely plugged into a 120V AC electrical
outlet only.
Check your fuse or breaker.
If your unit still does not work, call Customer care at 1-800-798-7398.
Is there water in the water tank? If not, add water to your steam mop
following instructions on page 4.
If the unit still does not make steam, follow the decalcification
instructions on page 9.
If your unit still does not work, call Customer care at 1-800-798-7398.
If you have already plugged in your unit, unplug and try a different
outlet. This may reset the standby mode.
Add water to the tank and press the STEAM CONTROL button to select
a steam setting.
If your unit still does not work, call Customer care at 1-800-798-7398.
Check to see if your micro-fiber cleaning pad is soaked through. We
recommend you unplug the steam mop and change the micro-fiber
cleaning pad.
Make sure the micro-fiber cleaning pad is attached correctly.
Do not leave your steam mop on the floor with a damp or wet cleaning
pad.
If you’re using tap water we recommend switching to distilled water.
Make sure the water tank door is closed securely.
Shark® provides in-tank water treatment media to help reduce scale
build-up caused by hard water. The square you are seeing is the water
treatment packet that will help minimize the build-up and calcification
to extend the life of your mop. Shark® recommends you use distilled
water to prevent hard water scaling to ensure the longevity and
durability of your mop.
The micro-fiber cleaning pad might be dirty. Flip or change the cleaning
pad.
If you washed the cleaning pad with powder detergent, then it may be
damaged and require replacement. Replacement pads are available at
sharkclean.com.
You might have left the mop in the same spot for too long.
Do you have hard water? If you do, you might want to switch to
distilled water.
This might be leftover from past cleaners used on the floor surface. Use
the Steam Mop a few more times and see if the leftover cloudiness is
removed. If this does not work, we suggest rinsing the floor with water,
letting it dry, and then steam mopping again with a clean pad. One or
more rinses generally removes the residue. A more stubborn case may
require you to rinse the floor with a mix of one part vinegar and two
parts water.
Make sure the micro-fiber cleaning pad is attached correctly.
Check to see if the cleaning pad is excessively dirty. Replace if the
cleaning pad is too dirty or wet.
10
S3452_11_ENG_IB_120515_1.indd 1012-05-16 10:10 AM
English
www.sharkclean.com
ONE (1) YEAR LIMITED WARRANTY
EURO -PRO Operating LLC warrants this product to be free from defects in material
and workmanship for a period of one (1) year from the date of the original purchase,
when utilized for normal household use, subject to the following conditions,
exclusions and exceptions.
If your appliance fails to operate properly while in use under normal household
conditions within the warranty period, return the complete appliance and accessories,
freight prepaid. For Customer Service support, call 1 (800) 798-7398 or visit our
website www.sharkclean.com.
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of purchase date and
$ 19.95 to cover the cost of return shipping and handling must be included. *
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair
or replacement of the unit at our option. This warranty does not cover normal wear
of parts and does not apply to any unit that has been tampered with or used for
commercial purposes. This limited warranty does not cover damage caused by
misuse, abuse, negligent handling or damage due to faulty packaging or mishandling
in transit. This warranty does not cover damage or defects caused by or resulting
from damages from shipping or repairs, service or alterations to the product or any of
its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC.
This warranty is extended to the original purchaser of the unit and excludes all other
legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC
warranty if any, is limited to the specific obligations expressly assumed by it under
the terms of the limited warranty. In no event is EURO- PRO Operating LLC liable
for incidental or consequential damages of any nature whatsoever. Some states/
provinces do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state or province to province.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include
proof of purchase date and to attach tag to item before packing with your name,
complete address and phone number with a note giving purchase information,
model number and what you believe is the problem with the item. We recommend
you insure the package (as damage in shipping is not covered by your warranty).
Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are
constantly striving to improve our products, therefore the specifications contained
herein are subject to change without notice.
Product Registration
Please visit www.sharkclean.com or call 1-800-798-7398 to register your new Shark®
product within ten (10) days of purchase. You will be asked to provide the store name,
date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product
safety notification. By registering you acknowledge to have read and understood the
instructions for use, and warnings set forth in the accompanying instructions.
11
S3452_11_ENG_IB_120515_1.indd 1112-05-16 10:10 AM
EURO -PRO Opera ting LLC
U.S .: Ne wton, MA 0245 9
Cana da: Vi lle St. Laure nt, Q uébec H4S 1A 7