Shark S3101NUK Owner's Manual

S3101NUK

OWNER’S GUIDE

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING YOUR SHARK® STEAM MOP,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING
YOUR STEAM MOP.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:

1. Use the system only for its intended use.

2. DO NOT use outdoors.

3. DO NOT leave the appliance unattended

DANGER OF SCALDING.

Please use caution when using the steam mop.
The steam emitted from the openings is very hot.

IMPORTANT:

This appliance is not intended for use by persons
with reduced physical, sensory or mental
capabilities or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning the use of the appliance
by a person responsible for their safety.

Children shall not use or play with this appliance.
Close supervision is necessary to keep appliance
out of reach of children during use and cooling.

4. DO NOT allow the appliance to be used by

5. Use only as described in this manual.

6. Use only manufacturer’s recommended

7. DO NOT use with damaged cord or plug.
8 . DO NOT USE if the appliance is not working,

9. NO SERVICEABLE PARTS. Incorrect

10. To protect against a risk of electric shock,

11. DO NOT handle plug or steam mop with wet

12. DO NOT pull or carry by power cord, use

13. DO NOT unplug by pulling on power cord. To

when plugged in. Always unplug the power
cord from the electrical outlet when not in
use and before servicing.

children. Close attention is necessary when
used near children, pets or plants.

accessories.

has been dropped, dropped into water,
damaged or left outdoors.

re-assembly or repair can cause a risk of
electrical shock or injury to persons when the
appliance is used. Contact Customer Service.

DO NOT immerse the steam mop into water
or any other liquids.

hands or operate appliance without shoes.

power cord as handle, close a door on the
power cord, or pull the power cord around
sharp edges or corners. Keep power cord
away from heated surfaces.

unplug, grasp the plug not the power cord.
Do not use extension cords or outlets with
inadequate current carrying capacity.

14. DO NOT put any objects into openings. Do not use

with any opening blocked.

15. DO NOT put hands or feet under the steam mop.

Unit gets very hot.

16. Use ONLY on flat, horizontal surfaces. Do not use

on walls, counters or windows.

17. DO NOT use on leather, wax polished furniture or

floors, synthetic fabrics, velvet or other delicate,
steam sensitive materials.

18. Liquid or steam must not be directed towards
equipment containing electrical components, such
as the interior of ovens.

19. DO NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to the water
used in this appliance as this may damage the
unit or make it unsafe for use. If you live in a hard
water area, we recommend using distilled water in
your steam mop.

20. When in use, NEVER turn the appliance over or
on its side. NEVER DIRECT STEAM TOWARDS

PEOPLE, ANIMALS OR PLANTS.

21. NEVER LEAVE THE STEAM MOP IN ONE SPOT
ON ANY SURFACE FOR ANY PERIOD OF TIME
WHEN CLEANING PAD IS ATTACHED AS THIS
WILL DAMAGE YOUR FLOORS.

22. Carefully remove the cleaning pad immediately
after you have unplugged and allowed the steam
mop to cool.

23. When cleaning the steam mop, unplug the power
cord from the electrical outlet and clean with a dry
or damp cloth. Do not pour water or use alcohol,
benzene or paint thinner on the unit.

24. Extreme caution should be exercised when using
this appliance to clean stairs.

25. Never use steam mop without cleaning pad attached.

SAVE THESE INSTRUCTIONS

26. Keep your work area well lit.

27. Store steam mop indoors in a cool, dry
place.

28. To avoid circuit overload, do not operate
another appliance on the same socket
(circuit) as the steam cleaner.

29. If an extension cord is absolutely necessary,
an extension cord rated a minimum of 15
ampere, 2.08mm
used. Cords rated for less amperage may
overheat. Care should be taken to arrange
cord so that it cannot be pulled or tripped
over.

30. DO NOT leave your Steam Mop unattended
when the system is connected to a power
supply/electrical outlet.

31. DO NOT store unit with damp/wet cleaning
pad attached. Never leave the steam mop
in one spot on any surface for any period
of time with a damp or wet cleaning pad
attached as this will damage your floors.

32. Make sure that the water tank door is
closed when using the appliance.

2

gauge cord should be

WARNING:

Your steam mop is designed to clean hard
floor surfaces that will withstand high heat.
Do not use on unsealed wood or unglazed
ceramic floors. On surfaces that have been
treated with wax or some no wax floors, the
sheen may be removed by the heat and
steam action. It is always recommended to
test an isolated area of the surface to be
cleaned before proceeding. We also
recommend that you check the use and care
instructions from the floor manufacturer.

080 0 862 0 453 www.sharkclean.eu

Quick Start

1

Quick Start

2

4

ASSEMBLE

1 Fit together the extension tubes as shown in

the illustration. See page 2 for more detailed
assembly instructions.

2 Place the cleaning pad underneath the mop

head, with quick fastener strips facing up.
Simply press the pad to the mop to at tach it.

080 0 862 0 453

3

FILL

3 Remove the cap to fill the Water Tank. Using

the filling flask, fill the tank, keeping the water
under the “MAX FILL” line. Don’t forget to
replace the cap.

PRIME STEAM

4 Plug in the mop. Wait 30 seconds for the unit

to heat up and the steam to be ready.

Push the handle toward the mop head in a

pumping motion. To prime simply pump the
handle 10-15 times to generate the steam.

QUICK TIP: Customise steam output

by slow or fast mopping with a for ward
and backward motion.

5