Shark Rotator SV1112 Series Instructions Manual

Download

Page 1

sharkclean.com

1-800-798-7398

FREESTYLE PRO CORDLESS

SV1112

Series

INSTRUCTIONS

Page 2

1-800-798-7398

THANK YOU

for purchasing the Shark® Rotator® Freestyle PRO Cordless Vacuum

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

This Owner’s Guide is designed to help you get a complete understanding of your new Shark Rotator Freestyle PRO Cordless Vacuum.

If you have any questions, please call the customer service line at 1-800-798-7398.

TECHNICAL SPECIFICATIONS

Voltage: 14.4V

registeryourshark.com

1-800-798-7398

RECORD THIS INFORMATION

Model Number: ��

Date Code: ��

Date of Purchase (Keep receipt): ��

Store of Purchase: ��

TIP: You can ﬁnd the model number and date code on the rating label located behind the dust cup on your unit.

Page 3

sharkclean.com

CONTENTS

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Getting to Know Your Shark® Rotator® Freestyle

PRO Cordless Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Assembling Your Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

How do I Know When the Vacuum is Charged? � � � � � � � � � � � � � 7

Using Your Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Emptying the Dust Cup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11 Cleaning the Filter � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12 Blockages in Nozzle � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �13

Cleaning the Brushroll � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �14 Blockages in Main Unit� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �14

Brushroll Removal and Insertion. . . . . . . . . . . . . . . . . . . . . . . . 15

Battery Pack Replacement and Disposal . . . . . . . . . . . . . . . . 17

Maximizing the Life of Your Battery . . . . . . . . . . . . . . . . . . . . 18

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Page 4

1-800-798-7398

THE POWER NOZZLE CONTAINS

ELECTRICAL CONNECTIONS:

• These are not serviceable parts.

• DO NOT use to vacuum any liquids.

• DO NOT immerse in water.

1 Inspect charging adapter cord and plug

for any damage before use. DO NOT use vacuum cleaner with a damaged charging adapter cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner to the adapter.

2 DO NOT use or charge unit outdoors or on

wet surfaces. Use only on dry surfaces.

3 If vacuum cleaner is not working as it

should, has been dropped, damaged, left outdoors, or dropped into water, return it to SharkNinja Operating LLC for examination, repair, or adjustment.

4 Always turn the vacuum off before

connecting or disconnecting the ﬂoornozzle.

5 DO NOT pull or carry the charging adapter

by the cord or use the cord as a handle.

6 DO NOT unplug the charging adapter by

pulling on the cord. Grasp the plug, not the cord.

7 DO NOT handle charging adaptor or

vacuum cleaner with wet hands.

8 DO NOT run the vacuum cleaner over the

charging adapter cord or close a door on the cord.

9 DO NOT use charging adapter with an

extension cord.

10 Use only the charging adapter model

XA1106 provided with the vacuum.

11 Keep charging adapter cord away from

heated surfaces.

12 This product includes rechargeable Ni-Mh

batteries. Batteries must be recycled or disposed of properly. DO NOT incinerate batteries or expose to high temperatures as they may explode.

13 Leaks from battery cells can occur under

extreme conditions. If the liquid gets on the skin, wash immediately with soap and water. If the liquid gets into the eyes, ﬂush them immediately with clean water for a minimum of 10 minutes and seek medical attention.

14 Do not place the batteries on metal

surfaces.

15 Do not touch metal parts of the batteries

together as the batteries will overheat.

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

WARNING

To reduce the risk of injury, ﬁre, electric shock, and property damage

resulting from improper use of the appliance, carefully observe the following instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.

Page 5

sharkclean.com

GENERAL USE

16 Use only as described in this manual.

1 7 Keep your work area well lit.

18 Keep the vacuum cleaner moving over

the carpet surface at all times to avoid damaging the carpet ﬁbers.

19 DO NOT place vacuum cleaner on

unstable surfaces such as chairs or tables.

20 DO NOT put any objects into openings.

DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airﬂow.

21 DO NOT allow the appliance to be used

by children. Close attention is necessary when used near children. This is not a toy.

22 DO NOT use without dust cup and/or

ﬁlters in place.

DUST CUP/FILTERS/ACCESSORIES

Before turning on the vacuum:

23 Make sure that all ﬁlters are thoroughly dry

after routine cleaning.

24 Make sure that dust cup and all ﬁlters are

in place after routine maintenance.

25 Make sure accessories are free of

blockages.

26 Only use Shark

brand ﬁlters and accessories. Failure to do so will void the warranty.

GENERAL CLEANING

27 DO NOT vacuum up large objects.

28 DO NOT vacuum up hard or sharp objects

such as glass, nails, screws, or coins that could damage the vacuum cleaner.

29 DO NOT vacuum up drywall dust,

ﬁreplace ash, or embers. DO NOT use as an attachment to power tools for dust collection.

30 DO NOT vacuum up smoking or burning

objects such as hot coals, cigarette butts, or matches.

31 DO NOT vacuum up ﬂammable or

combustible materials (e.g., lighter ﬂuid, gasoline, or kerosene) or use vacuum in areas where they may be present.

32 DO NOT vacuum up toxic solutions

(e.g., chlorine bleach, ammonia, or drain cleaner).

33 DO NOT use in an enclosed space

where vapors are present from paint, paint thinner, moth-prooﬁng substances, ﬂammable dust, or other explosive or toxic materials.

34 DO NOT vacuum up any liquids.

35 DO NOT immerse vacuum cleaner in water

or other liquids.

36 Use extra care when cleaning on stairs.

SAVE THESE INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE

Page 6

1-800-798-7398

GETTING TO KNOW YOUR SHARK® ROTATOR® FREESTYLE PRO CORDLESS VACUUM

WELCOME!

Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will ﬁnd it all in here.

MAIN UNIT

A Handle

B Main Body

C Screw

D Dust Cup Release

E Upper Dust Cup Door Release

F Dust Cup

G Lower Dust Cup Door Release

H Motorized Floor Nozzle

I Headlights

J Power Button/Surface Selector

K Charging Adapter

L Precision Charger Base

Page 7

sharkclean.com

Page 8

1-800-798-7398

1 Insert vacuum body into

ﬂoor nozzle.

ASSEMBLING YOUR VACUUM

TIP: Before using

vacuum, ensure the dust cup is securely in place.

TIP: For the ﬁrst use, give the vacuum a full charge. Depending on usage, the time for a full charge is 4 to 7 hours.

2 Insert handle pole into

main body and secure by screwing in bolt (taped to handle during shipping).

STEP 1 STEP 2

HOW DO I KNOW WHEN THE VACUUM IS CHARGED?

The entire oval blue light around the power button ﬂashes.

The unit is still charging.

One half of the oval blue light around the power button ﬂashes.

The unit is fully charged.

Page 9

sharkclean.com

3 Insert the charging adapter plug by aligning

the arrows on the plug and charging jack. Push in until it clicks into place.

4 Place vacuum on precision charger base.

STEP 3 STEP 4

Page 10

1-800-798-7398

USING YOUR VACUUM

TIP: The oval blue light

around the power button will indicate which setting you are on.

On the high speed carpet setting, the vacuum will run for approximately 12 minutes.

On the lower speed bare ﬂoor setting, the vacuum will run for approximately 17 mi nute s.

1 Place foot on ﬂoor nozzle and tilt handle back.

Page 11

sharkclean.com

Press the power button once to turn on the carpet setting. The brushroll will spin quickly in this mode to get deep carpet cleaning.

3 Press the power button a second time to

turn on the bare ﬂoor setting. The brushroll will spin slowly in this setting to vacuum up all of the surface litter on carpet and bareﬂoors.

Press the power button a third time to turn

off the vacuum.

Page 12

1-800-798-7398

MAINTENANCE

RECOMMENDED CLEANING SCHEDULE:

Dust Cup

Empty dust cup after every use or as debris approaches the MAX FILL line.

If the dust cup door does not swing open after pressing the release button, press down on the tabs on either side of the button to release the door.

Foam Filter

XF110 0T Clean the foam ﬁlter once per month.

EMPTYING THE DUST CUP

1 Press down on the dust-

cup release button and lift dust cup out.

2 Hold dust cup over a trash

bin and press the bottom dust-cup release latch.

STEP 1 STEP 2

WARNING: DO NOT operate the vacuum with a wet ﬁlter.

DO NOT use a hair dryer or other forced hot air to dry the ﬁlter.

DO NOT operate vacuum without the ﬁlter in place.

To keep your vacuum’s suction power optimal, follow these instructions. Make sure unit is off and is removed from the precision charger base.

Page 13

sharkclean.com

3 Press the top dust-cup

release latch and pull up on handle. Lift out metal screen and clear debris.

CLEANING THE FILTER

Remove the dust cup,

then remove the foam ﬁlter.

2 Hand wash ﬁlter with water

only. Squeeze excess water out and allow ﬁlter to air-dry completely before returning ﬁlter to the unit.

STEP 3 STEP 1 STEP 2

Page 14

1-800-798-7398

BLOCKAGES IN NOZZLE

1 Press the release button

on the rear of the main body and remove the ﬂoor nozzle.

MAINTENANCE

2 Pull back the neck of the

ﬂoor nozzle to straighten the air passage and remove debris.

TIP:

The brushroll is equipped with a raised cutting guide to easily cut hair and debris.

STEP 1 STEP 2

Page 15

sharkclean.com

CLEANING THE BRUSHROLL

Flip the nozzle over to access brushroll.

Use scissors to carefully remove hair and debris wrapped around the brushroll.

STEP 3 STEP 4

BLOCKAGES IN MAIN UNIT

4 You can also check for blockages in the main

body. Just remove ﬂoor nozzle and dust cup and shine a ﬂashlight in the opening.

Page 16

1-800-798-7398

BRUSHROLL REMOVAL AND INSERTION

STEP 1

STEP 2

1 Use the edge of a coin

to turn the dial near the brushroll access door to the unlocked position.

2 Remove brushroll access

door.

Page 17

sharkclean.com

STEP 3 STEP 4 STEP 5

3 Slip black belt off of white

gear and lift out brushroll to clean off debris.

4 Once the brushroll has

been cleaned, reinsert by slipping the black belt back onto the white gear.

5 Align the white square at

the end of the brushroll with the slot near the belt. Fit the square into the slot.

Page 18

1-800-798-7398

BATTERY PACK REPLACEMENT & DISPOSAL

MAXIMIZING THE LIFE OF YOUR BATTERY

1 This vacuum is equipped with an advanced feature that

will shut off the vacuum when the battery is almost fully discharged. If the vacuum shuts off while in use, charge the unit until one half of the oval blue light around the power button ﬂashes, indicating a full charge.

2 Charge the vacuum for 7 hours before initial use. After

initial use, each recharge will take 4 to 7 hours because the charger monitors battery properties to extend battery life. The entire oval LED light around the power button will ﬂash every 2 seconds while the unit is charging. When the charge is complete, one half of the oval will ﬂash every 2 seconds.

3 The precision charger monitors the batteries so you don’t

have to. Leaving the unit charging past the complete charge time will NOT harm the batteries.

4 If the vacuum has never been used or has not been used

for an extended period of time, it will take 3 to 5 complete charge and run-down cycles to realize the full operational time of the vacuum.

5 Use only the charge adapter supplied with this unit, marked

with “For SV1112 series models only”. If other chargers are used, the battery can fail, causing damage to the battery, to the vacuum, or to personal property.

WARNING: The Cordless vacuum is powered by NiMh batteries, which must be recycled or disposed of properly in accordance with state, federal and local laws.

If uncertain how to remove the battery pack, we suggest you take your hand vacuum to a reputable small appliance service technician to have this service performed.

WARNING: Never use ordinary batteries for replacement as these may leak and damage your vacuum. Use only the battery pack provided by SharkNinja for replacement.

WARNING: Do not store or charge in areas of high temperature or humidity.

Replacement Battery Part Number

XBT1106

Charging Adapter Part Number

XA1106

Page 19

sharkclean.com

Push the connector

terminals together until they lock into place.

Place the new battery

pack into the battery compartment, taking care to tuck the wiring completely so that it does not interfere with the battery access door.

Place the battery door

onto the bottom of the nozzle, slide it back into place and move the sliding tab next to the door to the lock position.

STEP 1 STEP 2 STEP 3

Page 20

1-800-798-7398

TROUBLESHOOTING GUIDE

Vacuum is not picking up debris. No suction or light suction.

(Refer to Maintenance section for more information.)

• Check ﬁlters to see if they need cleaning. Follow instructions for rinsing and drying the ﬁlters

before re-inserting in the vacuum.

• Dust cup may be full; empty dust cup.

• Remove any string, carpet ﬁbers, or hair that may be wrapped around the brushroll.

• Check for blockages in the dust cup ﬁlter and ﬂoor nozzle.

• Make sure that the battery is fully charged.

Vacuum will not operate.

• The battery may be depleted. Charge the vacuum until half of the oval light ﬂashes, indicating

full charge.

• The brushroll may be jammed. Turn the unit off and allow it to cool down for 10 seconds.

• Ensure nothing is blocking the motorized brush or wrapped around the brushroll.

Charging indicator does not illuminate.

• Check to see if the charge adapter is plugged in properly to the outlet and to the charging jack.

• Ensure there is no debris accumulated on the metal charge contacts on the ﬂoor nozzle or

charging adaptor.

• Ensure that the electrical outlet is supplying power to the charger.

Motorized brush will not work.

• The ﬂoor nozzle may have blockage; See “Clearing Blockages”.

• Ensure that the ﬂoor nozzle is properly attached.

Dust escapes from vacuum.

• Empty the dust cup container.

• Ensure that the ﬁlter is inserted completely into its holder below the dust cup.

• Check for punctures in dust cup ﬁlter or cracks in the dust cup and replace if necessary.

Vacuum turns off on its own.

• Charge the unit until half of the oval ﬂashes, indicating a full charge.

Run Time has decreased over time.

If you experience shorter run time over the life of the vacuum, perform the following battery reconditioning steps. These steps can also be performed as monthly maintenance for maximum battery life.

• Make sure the vacuum is fully charged (this could take up to 7 hours).

• Run vacuum until it turns itself off.

• Fully charge the vacuum again.

WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before servicing.

Page 21

sharkclean.com

NOTES

Page 22

1-800-798-7398

NOTES

Page 23

sharkclean.com

ONE (1) YEAR LIMITED WARRANTY

The 1-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is

not transferable.

SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of 1 year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in this instruction manual, subject to the following conditions and exclusions.

What is covered in my warranty?

1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced for up to 1 year from the original purchase date.

2. In the rare event that a replacement unit is issued, the warranty coverage ends six months following the receipt date of the replacement unit, or the remainder of the existing warranty, whichever is greater. If the unit is replaced, SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered in my warranty?

Our Customer Care/Product Specialists are available to provide all the warranty service options available to you, including the possibility of upgrading to our VIP Warranty Service Options for select product categories.

1. Normal wear and tear of wearable parts such as foam as ﬁlters, HEPA ﬁlters, pads etc., which require regular maintenance and/or replacement to ensure the proper functioning of your unit are not covered by this warranty.

2. Any unit that has been tampered with or used for commercial purposes.

3. SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $19.95 for return shipping costs will be charged at the time of return shipment of the repaired or replacement unit.

Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.

5. Consequential and incidental damages.

6. Defects caused by or resulting from damages from shipping or repairs, service, or alteration to the product or any of its parts which have been performed by a repair person not authorized by SharkNinja.

7. Products purchased, used or operated outside of North America.

Problems with your unit/How to get service

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com for product care/maintenance self-help. Our customer care and product specialists are also available at 1-800-798-7398 to assist with product support and warranty service options.

How to initiate a warranty claim

You can call 1-800-798-7398 to have a customer care specialist assist you. Please note you must call 1-800-798-7398 to initiate a warranty claim. Return and Packing Instruction information will be provided at that time.

Replacement parts are available for purchase at sharkclean.com. For more information on what are classiﬁed as wearable and non-wearable parts, please visit sharkwarranty.com.

This warranty gives you speciﬁc legal rights, and you also may have other rights that vary from state to state.

Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

Page 24

@sharkcleaning@sharkcleaning

SharkNinja Operating LLC US: Newton, MA 02459 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com

Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the speciﬁcations contained herein are subject to change withoutnotice.

Shark and Rotator are registered trademarks of SharkNinja Operating LLC.

For SharkNinja U.S. Patent information visit sharkninja.com/USPatents