Shark Rotator NV552, ROTATOR NV500 Series Instructions Manual

sharkclean.com

1-800-798-7398

NV552

Model • Modèle • Modelo

INSTRUCTIONS INSTRUCCIONES

1-800-798-7398

THANK YOU

for purchasing the Shark® Rotator® Pro Complete

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

This Owner’s Guide is designed to help you get a complete understanding of your new Shark Rotator Pro Complete.

If you should have a question, please call the customer service line at 1-800-798-7398.

TECHNICAL SPECIFICATIONS

Voltage: 120V., 60Hz Watts: 1200W Amps: 10A

sharkclean.com

1-800-798-7398

RECORD THIS INFORMATION

Model Number: �� Date Code: �� Date of Purchase (Keep receipt): �� Store of Purchase: ��

TIP: You can ﬁnd the model number on the rating label located on the back of your unit.

TIP: You can locate the date code on one of the prongs of the power cordplug.

sharkclean.com

ENGLISH

CONTENTS

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Getting to Know Your Shark® Rotator® Pro Complete . . . . . . 5

Assembling Your Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Using Your Vacuum in Upright Mode . . . . . . . . . . . . . . . . . . . . 9

What Does the Brushroll Indicator Light Mean? � � � � � � � � � � � � � 9

Using Your Vacuum in Above-Floor Mode . . . . . . . . . . . . . . . .11

The Beneﬁts of Suction Control � � � � � � � � � � � � � � � � � � � � � � � � � � � 11

Using Your Vacuum in Lift-Away

Mode . . . . . . . . . . . . . . . . . 13

Lift-Away Cleaning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13

Using Your Caddy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Compatible Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Emptying the Dust Cup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �19 Cleaning the Filters � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20

Checking for Blockages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

1-800-798-7398

THE POWER NOZZLE, WAND, AND

HANDLE CONTAIN ELECTRICAL CONNECTIONS:

• These are not serviceable parts.

• Do not use to vacuum any liquids.

• Do not immerse in water.

•

If handle/wand is damaged, discontinue use.

1 Inspect power cord or plug for any damage

before use. DO NOT use vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging or unplugging the vacuum cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks.

2 DO NOT use outdoors or on wet surfaces.

Use only on dry surfaces.

3 Unplug from electrical outlet when not in

use and before servicing.

4 If vacuum cleaner is not working as it

should, has been dropped, damaged, left outdoors, or dropped into water, return it to SharkNinja Operating LLC for examination, repair, or adjustment.

5 The hose contains electrical wires. DO NOT

use when damaged, cut, or punctured.

6 DO NOT pull or carry vacuum cleaner by

the cord or use the cord as a handle.

7 DO NOT unplug by pulling on cord. Grasp

the plug, not the cord.

8 DO NOT handle plug or vacuum cleaner

with wet hands.

9 DO NOT run the vacuum cleaner over the

power cord, close a door on the cord, or pull cord around sharp corners.

10 The use of an extension cord is NOT

recommended.

11 DO NOT leave vacuum cleaner unattended

when plugged in.

12 Keep cord away from heated surfaces. GENERAL USE

13 Use only as described in this manual. 1 4 Keep your work area well lit. 15 Keep the vacuum cleaner moving over

the carpet surface at all times to avoid damaging the carpet ﬁbers.

16 DO NOT place vacuum cleaner on unstable

surfaces such as chairs or tables.

17 DO NOT put any objects into openings. DO

NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airﬂow.

18 DO NOT allow the appliance to be used by

children. Close attention is necessary when used near children. This is not a toy.

19 DO NOT use without dust cup and/or ﬁlters

in place.

DUST CUP/FILTERS/ACCESSORIES

Before turning on the vacuum: 20 Make sure that all ﬁlters are thoroughly dry

after routine cleaning.

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

WARNING

To reduce the risk of injury, ﬁre, electric shock, and property damage

resulting from improper use of the appliance, carefully observe the following instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.

sharkclean.com

ENGLISH

21 Make sure that dust cup and all ﬁlters are

in place after routine maintenance.

22 Make sure accessories are free of

blockages.

23 Only use Shark-brand ﬁlters and

accessories (failure to do so will void thewarranty).

HOSE ATTACHMENTS 24 DO NOT use if airﬂow is restricted; if the air

paths or the motorized ﬂoor nozzle become blocked, turn the vacuum cleaner off and unplug from electrical outlet. Remove all obstructions before you turn on the unitagain.

25 Keep the end of the hose and accessory

openings away from face and body.

26 Keep cleaning tools and hose suction

openings away from hair, face, ﬁngers, uncovered feet, or loose clothing.

2 7 Only use manufacturer’s recommended

attachments.

GENERAL CLEANING 28 DO NOT pick up large objects. 29 DO NOT pick up hard or sharp objects

such as glass, nails, screws, or coins that could damage the vacuum cleaner.

30 DO NOT use to pick up drywall dust,

ﬁreplace ash, or embers. DO NOT use as an attachment to power tools for dust collection.

31 DO NOT pick up smoking or burning

objects such as hot coals, cigarette butts, or matches.

32 DO NOT pick up ﬂammable or combustible

materials (e.g., lighter ﬂuid, gasoline, or kerosene) or use vacuum in areas where they may be present.

33 DO NOT pick up toxic solutions (e.g.,

chlorine bleach, ammonia, or drain cleaner).

34 DO NOT use in an enclosed space

where vapors are present from paint, paint thinner, moth-prooﬁng substances, ﬂammable dust, or other explosive or toxic materials.

35 DO NOT vacuum up any liquids. 36 DO NOT immerse vacuum cleaner in water

or other liquids.

37 Use extra care when cleaning on stairs.

POLARIZED PLUG

To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one blade is wider than the other). As a safety feature, this plug will ﬁt into a polarized outlet only one way. If the plug does not ﬁt fully into the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician. DO NOT force into outlet or try to modify to ﬁt.

SAVE THESE INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE

1-800-798-7398

GETTING TO KNOW YOUR SHARK® ROTATOR® PRO COMPLETE

WELCOME!

Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will ﬁnd it all in here.

MAIN UNIT A Hose B Suction Control C Handle Release Button D Upper Cord Hook E Power Button F Lift-Away® Button G Brushroll on/off button H Wand Release Button I Wand J Lower Cord Hook K Motorized Floor Nozzle L Brushroll Indicator Light M Headlights

sharkclean.com

ENGLISH

E F

Cord

Hook

Cord

Hook

Cord

Hook

Cord

Hook

Cord

Hook

1-800-798-7398

TIP: To store your vacuum, wrap cord around cord hooks.

1 Place the pod onto

ﬂoornozzle.

ASSEMBLING YOUR VACUUM

TIP: For quick cord

access, rotate upper hook down and remove cord.

2 Slide wand into base

ofpod.

STEP 1 STEP 2

sharkclean.com

ENGLISH

3 Insert handle into top of wand. Then

attach hose into base of pod.

4 Insert tools into accessory clips, then tuck

the hose between the clips.

STEP 3 STEP 4

1-800-798-7398

USING YOUR VACUUM IN UPRIGHT MODE

WARNING: DO NOT use to pick up drywall dust, ﬁreplace ash, or embers. DO NOT use as an attachment to power tools for dust collection.

WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?

Solid Green

The brushroll is on and working as it should.

Solid Red

There is a jam in the brushroll area. Turn your vacuum off and remove the blockage.

No Light

The brushroll is off. To turn it on, press the BRUSHROLL button. The light should turn green, and the brushroll should spin.

1 Plug power cord into outlet. Place foot on ﬂoor nozzle

andtilt handle back.

STEP 1

Brushroll

Indicator

sharkclean.com

ENGLISH

2 Press POWER to clean hard ﬂoor surfaces,

area rugs or above-ﬂoor. The brushroll will not spin in this mode.

3 Press POWER and BRUSHROLL to clean

carpets. The BRUSHROLL button will illuminate green. The brushroll will spin only when the vacuum is reclined and the BRUSHROLL button is green.

NOTE: For deep cleaning per ASTM F 608 (embedded

dirt in carpets) please ensure brushroll is on with the suction control closed.

STEP 2 STEP 3

1-800-798-7398

Cord Hook

1 Press HANDLE release

button when you need to clean within short reach.

USING YOUR VACUUM IN ABOVE-FLOOR MODE

Press WAND button on pod when you need to clean with a longer reach.

STEP 1

THE BENEFITS OF SUCTION CONTROL

Suction Control is a way for you to adjust suction power when you are using different tools or vacuuming different surfaces. For example, if you are feeling resistance vacuuming thick carpet or upholstery, opening the suction control to MIN will help reduce your push/pull effort.

sharkclean.com

ENGLISH

Suction Control

MAX MIN

2 Insert wand or handle directly into desired

tool and pivot back to release tool from clip.

3 The collar is located at the base of the top

handle. Rotate the collar counterclockwise to minimize suction. Close by rotating clockwise to maximize suction.

STEP 2 STEP 3

1-800-798-7398

LIFT-AWAY CLEANING 1 Press LIFT-AWAY to lift

pod off ﬂoor nozzle.

USING YOUR VACUUM IN LIFT-AWAY® MODE

WARNING: Ensure solid footing when using in Lift-Away mode. Using for an application where you lack stability may result in personal injury.

TIP: Hold pod in hand to

clean in Lift-Away mode.

WHAT IS LIFT-AWAY?

Our Lift-Away feature allows you to remove the pod from the ﬂoor nozzle to easily clean stairs, above ﬂoor with accessories, or hard ﬂoors with the hard-ﬂoor attachments.

2 Press HANDLE release

button when you need to clean within short reach.

Cord Hook

sharkclean.com

ENGLISH

3 Or you can press WAND button on

pod when you need to clean with a longerreach.

4 Attach desired cleaning tool to the end of

handle or wand.

1-800-798-7398

If your vacuum comes with a caddy, use these instructions.

To purchase a caddy, go to sharkclean.com

USING YOUR CADDY

1 Press LIFT-AWAY to lift

pod off ﬂoor nozzle and place pod onto canister caddy.

2 Press WAND button to

release the wand or press HANDLE button to release the handle only.

TIP: Use the posts on the caddy to store additional cleaning accessories.

sharkclean.com

ENGLISH

3 Attach preferred accessory to the wand

orhandle.

4 To release pod from caddy, press LIFT-

AWAY and lift the pod.

1-800-798-7398

COMPATIBLE ACCESSORIES

There are a variety of accessories that are compatible with this vacuumseries.

The top ﬂap of your box shows the select accessories that are included with your model.

To purchase additional accessories, go to

sharkclean.com

A Crevice Tool

Gives you extended

cleaning reach for small spaces.

Premium Pet Power Brush

Designed for removal of

pet hair and ground-in dirt from carpeted stairs and upholstery.

D Under-Appliance Wand

Extend to access areas

under hard-to-move appliances and furniture.

C Wide Upholstery Tool

Remove pet hair and

dust from curtains and other delicate fabrics and upholstery.

F Dusting Brush

Dust a multitude of

surfaces such as shelves, tables & baseboards. Turn the brush head to adjust the angle to the surface you are cleaning.

E Dust-Away

™

Hard Floor

Attachment

Vacuums and dusts bare

ﬂoors using washable or disposable pads.

sharkclean.com

ENGLISH

1-800-798-7398

To keep your vacuum’s suction power optimal, follow these instructions. Make sure unit is off and cord is unplugged.

MAINTENANCE

RECOMMENDED FILTER CLEANING SCHEDULE:

Pre-Motor Filter Kit

(Foam & Felt) XFF500 Clean every 3 months.

Post-Motor Filter

(HEPA) XHF500 Clean once a year.

EMPTYING THE DUST CUP 1 Pull up on dust cup

release latches and lift dust cup off pod.

2 Hold dust cup over a

trash bin and press the empty-release latch on the bottom.

STEP 1 STEP 2

WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before servicing.

Hand wash with water only to prevent damage from cleaning chemicals. Allow ALL ﬁlters to dry completely before replacing in the vacuum to prevent liquid from being drawn into

electric parts. IMPORTANT: Do not use

soap when cleaning the HEPA ﬁlter.

sharkclean.com

ENGLISH

3 Press top dust-cup

release latch to access dust screen and remove built-up debris asrequired.

CLEANING THE FILTERS 1 Pre-Motor

(foam and felt):

With the dust cup removed, take out and rinse the foam and felt ﬁlters with water. Tap loose dirt off ﬁlters between washes asneeded.

2 Post-Motor (HEPA):

To access the HEPA ﬁlter, press the button and pull the grill away from the vacuum. Remove and rinse the HEPA ﬁlter.

STEP 3

HEPA

FELT FILTER

FOAM FILTER

FILTER FRAME

1-800-798-7398

1 Using a coin, turn the

screws to the unlock position and pull up to expose the airway. Remove the blockage.

CHECKING FOR BLOCKAGES

2 Remove any string, hair

or debris that may be wrapped around the brushroll.

WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before servicing.

WARNING: Do not cut anything but the hair, ﬁbers, or string that is on the brushroll.

TIP: You can also check

for blockages in the hose and tubes. Just remove ﬂoor nozzle, dust cup and hose and shine a ﬂashlight in the openings.

STEP 1 STEP 2

BOTTOM OF FLOOR NOZZLE

sharkclean.com

ENGLISH

Squeeze tabs and remove hose.

Tilt elbow down 90 degrees.

Press elbow release latch.

Remove elbow and check for blockages.

Once blockages are removed, replace elbow by inserting back into the opening, then clipping back into the latch.

STEP 1

STEP 2 STEP 4

STEP 3

HOSE CUFF AT BASE OF POD

+ 53 hidden pages

Shark Rotator NV552, ROTATOR NV500 Series Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual