Shark Rocket IX160 Series,Rocket IZ160 Series,ROCKET IX140 Series,ROCKET IZ140 Series Owner's Manual
ROCKET®
Cordless Vacuum
IX160 Series
IZ160 Series
OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY • PLEASE READ
ALL INSTRUCTIONS BEFORE USING THIS VACUUM.
If the charging cord plug does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. DO NOT force into outlet
or try to modify to fit.
To reduce the risk of shock and unintended operation, turn o power and remove
the Li-Ion battery before servicing.
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
THE FLOOR NOZZLE, WAND, AND
HANDHELD VACUUM CONTAIN ELECTRICAL
CONNECTIONS:
1. This vacuum consists of a motorized
nozzle, wand, and handheld vacuum.
These components contain electrical
QUICK
connections, electrical wiring, and
moving parts that potentially present risk
to the user.
START
2. Before each use, carefully inspect
all parts for any damage. If a part is
damaged, discontinue use.
GUIDE
3. Use only identical replacement parts.
4. This vacuum contains no serviceable
parts.
5. Use only as described in this manual.
DO NOT use the vacuum for any purpose
other than those described in this manual.
6. With the exception of the filters and dust
cup, DO NOT expose any parts of the
vacuum to water or other liquids.
7. Keep the appliance and its cord out
of reach of children. Do not allow the
appliance to be used by children. Do
not allow to be used as a toy. Close
supervision is necessary when used near
children.
GENERAL USE
8. This appliance can be used by persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way
and understand the hazards involved.
Cleaning and user maintenance shall not
be made by children.
9. Always turn o the vacuum before
connecting or disconnecting any current
carrying hoses, motorized nozzles,
chargers, batteries, or other electrical or
mechanical parts.
10. DO NOT handle plug or vacuum with
wet hands.
11. DO NOT use without dust cup, filters,
and brushroll in place.
12. Only use Shark® branded filters and
accessories. Failure to do so will void
the warranty.
13. DO NOT put any objects into nozzle or
accessory openings. DO NOT use with
any opening blocked; keep free of dust,
lint, hair, and anything that may reduce
air flow.
14. DO NOT use if nozzle or accessory
airflow is restricted. If the air paths or
the motorized floor nozzle become
blocked, turn the vacuum o. Remove all
obstructions before you turn on the unit
again.
15. Keep nozzle and all vacuum openings
away from hair, face, fingers, uncovered
feet, or loose clothing.
16. DO NOT use if vacuum is not working
as it should, or has been dropped,
damaged, left outdoors, or dropped into
water.
17. Use extra care when cleaning on stairs.
18. DO NOT leave the vacuum unattended
while powered on.
19. When powered on, keep the vacuum
moving over the carpet surface at all
times to avoid damaging the carpet
fibers.
20. DO NOT place vacuum on unstable
surfaces such as chairs or tables.
21. DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails,
screws, or coins)
d) Large quantities of dust (including
drywall, fireplace ash, or embers).
DO NOT use as an attachment to
power tools for dust collection.
e) Smoking or burning objects (hot coals,
cigarette butts, or matches)
f) Flammable or combustible materials
(lighter fluid, gasoline, or kerosene)
g) Toxic materials (chlorine bleach,
ammonia, or drain cleaner)
22. DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may
contain explosive or toxic fumes
or vapors (lighter fluid, gasoline,
kerosene, paint, paint thinners,
mothproofing substances, or
flammable dust)
23. Turn o the vacuum before plugging in or
unplugging the charger.
24. Turn o the vacuum before any
adjustment, cleaning, maintenance or
troubleshooting.
25. During cleaning or routine maintenance,
DO NOT cut anything other than hair,
fibers, or string wrapped around the
brushroll.
26. Allow all filters to air-dry completely
before replacing in the vacuum to prevent
liquid from being drawn into electric
parts.
27. DO NOT modify or attempt to repair the
vacuum or the battery yourself, except as
indicated in this manual.
DO NOT use the battery or vacuum if it
has been modified or damaged.
Damaged or modified batteries may
exhibit unpredictable behavior resulting in
fire, explosion or risk of injury.
28. Turn o all controls before unplugging.
29. Always turn o this appliance before
connecting or disconnecting motorized
nozzle or hand tool.
SAVE THESE INSTRUCTIONS
BAT TE RY PAC K
30. The battery is the power source for the
vacuum. Carefully read and follow all
charging instructions.
31. To prevent unintentional starting, ensure
the vacuum is powered o before picking
up or carrying the vacuum. DO NOT
carry the appliance with your finger on
the power switch.
32. Use only Shark® charger DK33248080H-U. Use of an incorrect charger
may result in no charging, and/or unsafe
conditions.
33. Keep the battery away from all metal
objects such as paper clips, coins, keys,
nails, or screws. Shorting the battery
terminals increases the risk of fire or
burns.
34. Under abusive conditions, liquid may
be ejected from the battery. Avoid
contact with this liquid, as it may cause
irritation or burns. If contact occurs, flush
with water. If liquid contacts eyes, seek
medical help.
35. Battery should not be stored at
temperatures below 37.4°F (3°C) or
above 104°F (40°C) to maintain longterm battery life.
36. DO NOT charge battery at temperatures
below 40°F (5°C) or above 104°F (40°C).
37. Store the appliance indoors. DO NOT use
or store it below 37.4°F (3°C). Ensure the
appliance is at room temperature before
operating.
38. DO NOT expose the battery to fire or
temperatures above 265°F (130°C) as it
may cause explosion.
sharkclean.comsharkclean.com
ASSEMBLY
LI -ION BATTERY
nozzle or a Dirt Engage™ floor nozzle. All versions assemble the same way.
1. Insert Wand into Floor Nozzle.
2. Insert Handheld Vacuum into wand.
For proper operation, ensure all components are completely connected and clicked into place.
2.
Standard
Wand
OR
MultiFLEX
Wand
2.
The Shark Li-Ion battery does not come fully charged. Prior to first use, charge completely. Your vcuum comes equipped with either stndrd wnd or MultiFLEX® wnd nd either stndrd floor
RUNTIMES PER FULLY-CHARGED BATTERY
To see the runtime of your Shark® cordless vacuum consult the Quick Start Guide or visit sharkclean.com/
support.
LED BATTERY POWER AND CHARGING INDICATORS
Charging
Low
Charge
Nearly
Full
NOTE: Full charge takes approximately 3 hours.
Mid
Charge
Full
Charge
In Use
Full
Charge
Mid
Charge
Low
Charge
1.
Standard
Floor Nozzle
NOTE: Your vacuum’s model number is located on the QR code label on the bottom of the handheld vacuum.
OR
Dirt Engage
Floor Nozzle
1.
Nearly
Empty
No
Charge
RECYCLING THE LI-ION BATTERY
When your Shark Li-Ion battery needs to be replaced, dispose of it or recycle it in accordance with local
ordinances or regulations. In some areas , it is illegal to place spent lithium-ion batteries in the trash or in a
municipal solid waste stream. Return spent batteries to an authorized recycling center or to the retailer for
recycling. Contact your local recycling center for information on where to drop o the spentbattery.
sharkclean.comsharkclean.com
CHARGING THE BATTERY
USING THE LI-ION CHARGER
SETTINGS
OFF SETTING I
LI-ION CHARGER
Plug the Li-Ion Charger into a wall outlet.
IN THE VACUUM: MULTIFLEX® WAND OUT OF THE VACUUM
To put the vacuum in storage mode, press the
MultiFLEX Wand Unlock L atch while folding the
handheld vacuum forward until the wand clicks and
locks. Plug the charger into the charging port on the
handheld vacuum.
IN THE VACUUM: STANDARD WAND
Remove the handheld vacuum from the wand by
pressing the Wand Release Button and pulling
up. Plug the charger into the charging port on the
handheld vacuum.
To remove the battery, squeeze the Battery
Release Button and slide backwards. Plug the
charger into the charging port on the battery.
Slide switch to the bottom to turn o power.
To begin vacuuming in Standard Mode, slide switch
to the desired setting.
SETTING II BOOST MODE
Carpet
The brushroll spins faster to pick up debris below
the surface ofyour carpets.
Bare Floor/Small Area Rugs
The brushroll spins slowly to clean bare floors and
small arearugs.
For an added boost in power, pull the Trigger
on the handheld vacuum. Release it to return to
normal power.
NOTE: MultiFLEX wand is not included with all configurations. See enclosed Quick Start Guide for your unit’s configuration.
NOTE: For dee p cleaning per AST M F 608 (emb edded dirt in carpets) please use s ettin g II, C arpe t. The C arpet setti ng
shoul d also be used wh en cle aning stuck-on dust and de bris .
sharkclean.comsharkclean.com
Loading...