Shark LIFT-AWAY XL UV550 Quick Start Manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
AS SE M BLY
A
 Vacuum Pod
B
C
 Extension Wand
D
 Handle and Hose
WHAT’S INSIDE
MAINTENANCE
UV550_QSG_ EB_ Mv4
B
D
A
QUICK START GUIDE
E
 Accessory Holder
F
 Pet Power Brush
G
 8” Crevice Tool
H
 Upholstery tool
F G
H
E
Empty dust cup after each use
Press top Dust Cup Release latch to access dust screen a nd remove built-up debris asrequired.
Pull up o n Dust Cup Relea se latch and lif t dust cup o canister.
Hold Dust Cup over a trash bin and press the empty-release latch on the bottom.
Remove any string, carpet fibers, or hair that may be wrapped around the brushroll.
Detach the motorized nozzle from the portable Lift-Away ca nis te r.
MAINTENANCE
Rinse pre-motor filters every 3 months and HEPA filter once a year. Rinse with water only. Allow filters to air-dry completely before reinstalling.
See enclosed Owner’s Guide for more information on how to clean and replace the filters.
Easy brushroll maintenance
Cleaning Filters
Post-Motor
Pre-Motor
1
(Click)
2
(Click)
Insert canister into motorized floor nozzle.
Connect handle to the wand, pressing until it clicks into place. Connect hose to the back of the canister, pressing until it clicks into place.
Insert wand into the ca niste r.
LIFT-AWAY® XL
Cord Storage
Wrap
Screen
Filter
C
VERSATILE FLOOR-TO-CEILING CLEANING
@sharkcleaning
1
Plug In Vacuum
Then place your foot gently on the floor nozzle and tilt the handle back.
FLOOR CLEANING
For questions or to register your product, contact us at 1-800-798-7398 or visit us online at sharkclean.com
©2018 LIFT-AWAY and SHARK are registered trademarks of SharkNinja Operating LLC.
PORTABLE LIFT-AWAY® MODE
Attach any cleaning accessories to the handle or wand.
= Carpet Cleaning
= Bare / Above Floor
= OFF
BRUSHROLL ON/OFF:
1 Press the ON/OFF switch “II” position
to engage the motorized floor brush (for vacuuming carpets and rugs).
2 NOTE: The motorized brush indicator
light will illuminate green when motorized floor brush is on, or red if there is a blockage or jam.
2
Choose Setting
Slide the power switch to the appropriate floor setting and start cleaning.
SUCTION CONTROL
Release suction for easier push & pull on high pile carpets and area rugs.
1
Detach canister for Lift-Away Mode
Press Lift-Away button to lift canister o floor nozzle.
2
Attach desired cleaning accessory.
To clean above-floor areas with the handle, detach it from the wand by pressing the Handle button.
To clean with a longer reach, detach the wand from the floor nozzle by pressing the Wand Release button.
Handle
Wand
Release
Loading...