Shark LA300 Owner's Manual

®

LIFT-AWAY

LA300 Series

OWNER’S GUIDE

®

ADV

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY • PLEASE READ CAREFULLY BEFORE USE

If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT force into outlet or try to modify to fit.

WARNING

To reduce the risk of fire, electric shock, injury, or property damage:

GENERAL WARNINGS

1. Your vacuum cleaner may consist of
a motorized nozzle, wand, hose, and/
or vacuum pod. This device contains
electrical connections, electrical
wiring, and moving parts that
potentially present risk to the user.

2. Use only identical replacement parts.

3. Carefully observe and follow the

instructions provided below to avoid
improper use of the appliance.
DO NOT use the vacuum for any
purpose other than those described in
this manual.

4. Before use, carefully inspect all parts
for any damage. DO NOT use if any
parts are damaged.

5. The use of an extension cord is NOT
recommended.

6. This vacuum cleaner contains no
serviceable parts.

USE WARNINGS

7. This appliance can be used by
persons with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of
the appliance in a safe way and
understand the hazards involved.
Cleaning and user maintenance shall
not be made by children.

8. Keep the appliance and its cord out
of reach of children. DO NOT allow
the appliance to be used by children.
DO NOT allow to be used as a toy.
Close supervision is necessary when
used near children.

9. Always turn off the vacuum cleaner
before connecting or disconnecting
any motorized nozzles or other
accessories.

10. DO NOT handle plug or vacuum
cleaner with wet hands.

11. DO NOT use without filters in place.

12. Only use Shark® branded filters and

accessories.

13. DO NOT damage the power cord:

a) DO NOT pull or carry vacuum

cleaner by the cord or use the cord
as a handle.

b) DO NOT unplug by pulling on cord.

Grasp the plug, not the cord.

c) DO NOT run the vacuum cleaner

over the power cord, close a door
on the cord, pull the cord around
sharp corners, or leave the cord
near heated surfaces.

14. DO NOT put any objects into nozzle
or accessory openings. DO NOT use
with any opening blocked; keep free
of dust, lint, hair, and anything that
may reduce airflow.

15. DO NOT use if nozzle or accessory
airflow is restricted. If the air paths or
the motorized floor nozzle become
blocked, turn the vacuum cleaner
off and unplug from electrical outlet.
Remove all obstructions before you
plug in and turn on the unit again.

16. Keep nozzle and all vacuum
openings away from hair, face,
fingers, uncovered feet, or loose
clothing.

17. DO NOT use if vacuum cleaner is not
working as it should, or has been
dropped, damaged, left outdoors, or
dropped into water.

18. Use extra care when cleaning
onstairs.

19. DO NOT leave the vacuum cleaner
unattended while plugged in.

20. When powered on, keep the
vacuum
carpet surface
damaging the carpet fibers.

21. DO NOT place vacuum cleaner on
unstable surfaces such as chairs
or tables.

22. Your Shark® vacuum may not be
designed to stand up on its own.
When taking a break from cleaning,
you may need to lean it against
furniture or a wall, or lay it flat
on the floor. Using the vacuum
for an application where the
unit lacks stability may result in
personalinjury.

23. DO NOT use to pick up:

a) Liquids
b) Large objects
c) Hard or sharp objects

d) Large quantities of dust (drywall

e) Smoking or burning objects (hot

f) Flammable or combustible

g) Toxic materials (chlorine bleach,

To reduce the risk of electric shock, this appliance has a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.

cleaner moving over the

at all times to avoid

(glass, nails, screws, or coins)

dust, fireplace ash, or embers).
DO NOT use as an attachment to
power tools for dust collection.

coals, cigarette butts, or matches)

materials (lighter fluid, gasoline,
or kerosene)

ammonia, or drain cleaner)

24. DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may

contain explosive or toxic fumes
or vapors (lighter fluid, gasoline,
kerosene, paint, paint thinners,
mothproofing substances, or
flammable dust)

25. Turn off all controls before plugging
in or unplugging the vacuum.

26. Unplug from electrical outlet
when not in use and before any
maintenance or cleaning.

27. Hand wash with water only. Washing
with cleaning chemicals could
damage the unit.

28. During cleaning or routine
maintenance, DO NOT cut anything
other than hair, fibers, or string
wrapped around the brushroll.

29. Allow all filters to air-dry completely
before replacing in the vacuum to
prevent liquid from being drawn into
electric parts.

30. Make sure the dust cup and all
filters are in place after routine
maintenance.

31. If provided, secure the power cord
around the two cord hooks during
storage.

SAVE THESE INSTRUCTIONS

sharkclean.comsharkclean.com

1

(Click)

ASSEMBLY ASSEMBLY

2

(Click)

Upper Cord Hook

Tool Storage Posts

3

(Click)

Lower Cord Hook

1. Insert Wand into pod

2. Insert Handle into wand.

3. Attach Hose to back of vacuum pod.

For proper operation, ensure all parts are firmly clicked into place.

POWER CORD

UPPER CORD HOOK CORD HOLDER

For cord access, rotate upper hook down
and remove cord.

Use cord holder on the side of wand to hold
cord in place while vacuuming.

sharkclean.comsharkclean.com