Shark GS500 11, GS500A 11, GS500CO 11, GS500W 11 User Manual

GS500 series

www.sharkclean.com

User’s Guide

Manual del usario

Garment Care System

Sistema de cuidado para prendas

™

GS500_series_IB_ES_100616.indd 1 10-06-16 11:46 AM

2

TOL L FREE : 1-80 0-798-7 398

3

ww w.sha rkcle an.co m

Engl ish

1. USE THE SYSTEM ONLY FOR ITS INTENDED
USE AS DESCRIBED IN THIS MANUAL.

2. ONLY USE WATER. To extend the life of your
Press & Refresh

™

Garment Care System, we

recommend using distilled water especially if you
live in an area with hard tap water.

3. DO NOT add cleaning solutions, scented
perfumes, oils, or any other chemicals to the
water used in this appliance as this may damage
the unit or make it unsafe for use.

4. Use of any substances other than
manufacturer’s recommended accessories will
automatically void your warranty.

5. DO NOT use outdoors.

6. DO NOT leave the appliance unattended when
plugged in.

7. Always unplug the power cord from the
electrical outlet when not in use, when filling
the water tank and before servicing.

8. DO NOT allow to be used as a toy.

9. DO NOT put any objects into openings or
operate with any opening blocked.

10. DO NOT use on leather, suede, vinyl, plastic or
other delicate, steam sensitive materials. Always
determine the colorfastness of any fabric before
using the fabric steamer by testing it on a small
portion of the garment’s underside.

11. This appliance and the accessories become
hot during use. Exercise care when changing
accessories and follow removing and changing
instructions as outlined in the manual. Use
caution while changing frames while in use,
Wrinkle Eraser

™

is hot.

12. The fabric steamer can be used in a vertical
or horizontal motion. NEVER hold the steam
head down while at rest or tilt it in a backward
position as this may result in hot water
discharge and possibly injury.

13. When cleaning the fabric steamer, unplug the
power cord and clean with a dry or damp cloth.
DO NOT pour water or use alcohol, benzene or
paint thinner on the unit.

14. NEVER attempt to steam clothing while on a
body.

15. To protect against a risk of fire, electric shock,
or injury:

a. To avoid circuit overload, DO NOT operate

another appliance on the same socket
(circuit) as the fabric steamer.

b. DO NOT immerse any part of the system in

water or other liquids.

c. DO NOT pull power cord to disconnect

from outlet; instead, grasp plug and pull to
disconnect.

d. DO NOT use extension cords or outlets with

inadequate current carrying capacity. If
an extension cord is absolutely necessary,
use a 15-ampere cord. Cords rated for
less amperage may overheat. Use care to
arrange the cord so that it cannot be pulled
or tripped over.

e. DO NOT operate the system with a

damaged cord or plug, or if the appliance
or any other part of the system has been
dropped or damaged.

f. DO NOT disassemble or attempt to repair

the fabric steamer. Return the system
to EURO-PRO Operating LLC for
examination and repair. Incorrect reassembly
or repair can cause a risk of electrical shock
or injury to persons when the fabric steamer
is used.

g. DO NOT handle plug or fabric steamer with

wet hands or operate without shoes.

h. DO NOT pull or carry by power cord, use

power cord as a handle, close a door on the

WHEN USING YOUR SHARK®
PRESS & REFRESH

™

GARMENT CARE
SYSTEM, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING
YOUR PRESS & REFRESH

™

GARMENT

CARE SYSTEM.

DANGER OF SCALDING

Please use caution when using the fabric
steamer directly or with the attachments. The
Wrinkle Eraser

™

pressing bar and the steam
emitted are very hot.
The Wrinkle Eraser

™

is not controlled by the
steam trigger and is hot as long as the unit
is turned on.

POLARIZED PLUG:

This appliance has a polarized plug (one blade
is wider than the other). As a safety feature,
this plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to

defeat this safety feature.

power cord, or pull the power cord around
sharp corners or edges.

i. DO NOT allow power cord to touch hot

surfaces.

j. ALWAYS disconnect system from electrical

outlet when filling with water or emptying
and when not in use.

k. NEVER attempt to fill this unit under a

water faucet. Always use the filling flask that
is provided.

l. NEVER turn the appliance over or on its

side when in use.

m. NEVER aim or direct steam towards people,

animals, or plants. The steam is very hot
and can cause burns. Burns can occur from
touching hot metal parts, hot water, steam,
steam bonnets or fabric frames.

n. DO NOT operate the fabric steamer while

under the influence of drugs, alcohol or
medications.

o. DO NOT operate in the presence of

explosive and/or flammable fumes.

p. Store your appliance indoors in a cool, dry

area out of the reach of children.
q. Keep your work area well lit.
r. Let the system cool completely before

putting away.
s. Keep out of the reach of children.

IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS

For Household Use Only

GS500_series_IB_ES_100616.indd 2-3 10-06-16 11:46 AM

4

TOL L FREE : 1-80 0-798-7 398

5

ww w.sha rkcle an.co m

Engl ish

Welcome to the next wave of garment care!

The Press & Refresh™ Garment Care System brings your fabrics back to life without a trip to
the dry cleaners! Shark® Steam Technology provides continuous powerful vertical steam that deeply
penetrates fabrics and renews fibers.

The Wrinkle Eraser™ heat bar simulates the soleplate of an iron and presses the fabric for a crisp finish.
Not only great on garments, the Press & Refresh™ can be used anywhere around the home:

upholstery, bedding, curtains and more!

Attaching the appropriate
accessor y:

The unit comes assembled with a
small steam bonnet attached. This
steam bonnet should always be in
place during use.

1 Attach the desired frame.
2 With the pointed end of the

frame pointed down, gently
attach the top of the frame

over the unit, above the wrinkle
eraser. Next, secure the pointed
end of the frame around the
bottom of the unit (Fig. 1).

3 To remove the frame, gently

pull on the pointed end and lift
the frame off the unit.

TIP: Wipe away condensation

from the steam guard on the
bottom of the frame after
extended use.

USAGE

TIPS & HELPFUL HINTS

FRAME/ACCESSORY

Bristle Brush Frame

Lint Brush Frame

Upholstery/Delicate
Fabric Frame & Delicate Steam Bonnet

Fabric: Cotton, Wool, Rayon, Linen, Denim

Garments: Jeans, dress shirts, dresses,
blouse, skirt, pants, suit s, blazers

Fabric: Cotton, Wool, Rayon, Polyester,
Silk, Satin, Cashmere

Garments: Dress shirts, dresses,
blouses, tunics, delicate fabrics when
Wrinkle Eraser

™

is needed

Upholstered fabrics: Bedding,
mattress, curtains, baby bedding,
plush toys, high chairs, car seats, sofa,
and arm chairs

Garments: Lace, velvet, embellished
items. For ex tremely embellished
garments, turn the garment inside out
and steam

Upholstery/Delicate
Fabric Frame & Upholster y Steam Bonnet

The bristle brush frame improves steam
penetration without leaving water marks

Use for removing wrinkles and creating a
crisp finish

Create pleats in skirts and pants

Steam and Press the details- great for
removing wrinkles and refreshing

Use for removing wrinkles and creating a
crisp finish

Specifically designed to refresh any soft
good around your home!

Specifically designed to deodorize and
press delicate garments

Helpful Tips on using the
Vertical Press Pad and Velcro

™

Clips:

1 The vertical press pad eliminates

the hassle of setting up an
ironing board. Setup on any door
and it is virtually invisible when
the door is closed. You can setup
the pad on the back of your
closet door or in your laundry

room and leave it setup for quick
touch ups whenever you need
them (Fig. 2).

2 There are web hooks on either

side of the press pad that
provide you with a larger surface
area for pressing. The Velcro™
clips assist in the positioning of
garments on the press pad.

Fig. 1

Fig. 2

4 The steam bonnet should only

be removed for cleaning.

GS500_series_IB_ES_100616.indd 4-5 10-06-16 11:46 AM

6

TOL L FREE : 1-80 0-798-7 398

7

ww w.sha rkcle an.co m

Engl ish

Contents

Getting Started 8

Assembly Of The Vertical Press Pad 9

Using Your Press & Refresh™ 10

Care Of Your Press & Refresh™ 13

Troubleshooting Guide 13

Replacement Parts 14

Warranty And Registration 15

Thank you
for purchasing
the Shark®
Press & Refresh™
Garment Care
System.

TECHNICAL SPECIFIC ATIONS

Voltage: 120V., 60Hz.

Power: 1580 W

Water Capacit y: 200 mL (6.5 fl. oz. )

This manual covers model numbers:

GS500 11

GS500A 11

GS500CO 11

GS500W 11

GS500_series_IB_ES_100616.indd 6-7 10-06-16 11:46 AM

8

TOL L FREE : 1-80 0-798-7 398

9

ww w.sha rkcle an.co m

Engl ish

IMPORTANT: Always make

sure the fabric steamer is
UNPLUGGED from the electrical
outlet when not in use. Never
fill the water reservoir when the
unit is plugged in.

IMPORTANT: Always check

the fabric care labels for
recommendations. Test the
fabrics for colorfastness in an
inconspicuous place such as
an inside seam. Some articles
of clothing are better steamed
from the underside.

IMPORTANT: When

assembling your fabric steamer,
there may be a little water in
the water tank. This is because
we test all our fabric steamers
100% before you buy them, so
you get a quality Shark

®

Steam

product.

Getting Started

First things first, you need to
know what’s in the box you
just opened:

a Fabric Steamer with small

steam bonnet attached

b Bristle Brush Frame
c Upholstery/Delicate Fabric

Frame

d Lint Brush Frame
e Upholstery Steam Bonnet
f Delicate Steam Bonnet

Assembly & use instructions:

1 Safely remove contents of the

Press & Refresh

™

Garment Care
System and lay them out on a
flat surface to see that you have
all the components to complete
the assembly.

2 READ ALL INSTRUCTIONS

BEFORE USING YOUR PRESS
& REFRESH™ GARMENT CARE
SYSTEM.

3 Only use water. To extend the

life of your Press & Refresh™
Garment Care System, we
recommend using distilled
water if you live in an area with
hard tap water.

4 Do not add cleaning solutions,

scented per fumes, oils, or
any other chemicals to the
water used in this appliance
as this may damage the unit
or make it unsafe for use. Use
of any substances other than
manufacturer’s recommended
accessories will automatically
void your warranty.

Assembly of the Vertical Press Pad

The Press & Refresh™ Garment Care System brings your fabrics back to life without a trip to
the dry cleaners! Shark

®

Steam Technology provides continuous powerful vertical steam that deeply

penetrates fabrics and renews fibers.
The Wrinkle Eraser

™

heat bar simulates the soleplate of an iron and presses the fabric for a crisp

finish. Press the Wrinkle Eraser

™

directly onto the garment for a crisp finish. Hold the steam trigger for

continuous steam.
Not only great on garments, the Press & Refresh

™

can be used anywhere around the home:

upholstery, bedding, curtains and more!
The vertical press pad makes garment care easy! Simply setup the pad onto any door, hang your

garment and Press & Refresh™!

g

h i

j

k

l

2 The Vertical Press Pad comes

asembled with heat protection
panels in the pockets on the
back. These panels protect your
door from heat damage and
should be in place at all times
during use.

3 Slip the webbing bands at the

top of the vertical press pad
over either side of any door
with the terr y cloth side facing
away from the door. With
the door open, loop the band
around the corner of the door
and repeat on the opposite
side. Gently tug on the pad
to make sure it is secure and
shut the door completely to
ensure the Vertical Press Pad is
stable for pressing. Be careful
not to close the door on your
fingers. Adjust the straps on
the webbing to the appropriate
height for comfort (Fig. 3).

TIP: The straps can be adjusted

to fit any door using the buckle
to adjust the strap lengths.

Assembling the vertical
press pad:

1 Insert the garment hook into

the top of the ver tical press
pad (Fig. 1). Insert one of the
support rods into the opening
on the side of the Vertical
Press Pad making sure that it
is inserted firmly into the hook
(Fig. 2). Do the same with the
other suppor t rod from the
other side.

g Vertical Press Pad
h Support Rods (x2)
i Garment Hook
j Heat Protection Panels (x8)
k Velcro

™

Clips (x3)

l Filling Flask

*Note: Model GS500W a lso includes
1 Accessory B ag, a 2 oz. bottle of Lin en
Water and a 1 oz. Stain Stick.

Fig. 3Fig. 2

Fig. 1

a

b c

e

d

f

GS500_series_IB_ES_100616.indd 8-9 10-06-16 11:46 AM

10

TOL L FREE : 1-80 0-798-7 398

11

ww w.sha rkcle an.co m

Engl ish

when the unit is on, the Wrinkle
Eraser™ bar gets ver y hot. Use
the steam guard on the bottom
of the frame to remove safely.

The small steam bonnet should

be attached to the unit at all
times during usage. Remove
the steam bonnet when the
unit has cooled for cleaning
only. The bonnet is permanently
attached to the bonnet frame
and should never be removed
from it.

To remove the small steam

bonnet, remove the frame on
the unit if one is in place, then
gently pull on either side of
the steam bonnet and pull the
bonnet frame off the unit.

To reattach the bonnet, gently

snap the frame over the steam
nozzle and press gently to lock
in place (Fig. 5).

Using the Press & Refresh
horizontally:

8 The Press & Refresh can be

used to deodorize, sanitize, and
refresh upholstered items: sofa,
baby bedding, mattress, car
seat, drapes, and more.

9 Attach the upholstery/delicate

frame and upholstery pad to the
unit.

10 In a horizontal position, move

the steamer continuously over
the upholstered item.

CAUTION: The Wrinkle Eraser

™

is hot. Use caution when
removing the frames. DO NOT
put your hands directly onto the
Wrinkle Eraser™.

WARNING: Never steam any

article of clothing while it is
being worn.

the Wrinkle Eraser™ directly
onto the fabric.

CAUTION: Do not over tilt the

unit when steaming overhead.

CAUTION: Do not hold the

unit in a fixed position on
delicate fabrics and upholstered
items.

5 The vertical press pad has two

web hooks on either side. You
can use these hooks to position a
garment for better results and a
larger pressing are when steaming
sleeves. Use caution when holding
the sleeves of garments while
steaming (Fig. 4).

6 When steaming lightweight

garments, pants and skirts
you can use the Velcro™ clips
to hold the garment on the
vertical pressing pad.

7 When finished using the Fabric

Steamer, turn the appliance
“Off” and let it cool before
emptying the water tank and
removing the bonnets and
frames.

Using Your Press & Refresh

™

Attaching the accessories:

3 Choose your desired frame. The

point of the frame should be
pointed down. Attach the top
flat area of the frame to the
unit and then gently push the
pointed end of the frame on
securely. (Fig. 2)

When using the upholster y/
delicate fabric frame:

4 Attach the desired bonnet to

the frame, then attach the
frame to the unit. Pull the
2 tabs on either side of the
bonnet over the top of the
frame and secure the bottom
of the bonnet to the frame
using the bottom tab (Fig. 3).
Then attach the frame to the
garment steamer as described
above (Fig. 4).

IMPORTANT: Use caution

when changing the frames

Using the Press & Refresh

™

and

vertical press pad:

1 Hang the vertical press pad on

a door. (Fig. 1)

2 Hang the garment that is to

be steamed onto the garment
hook on the ver tical press pad.
(Fig. 2)

3 Once the selected accessory is

placed on the fabric steamer,
turn the On/Off switch to the
“On” position, a blue LED
light will illuminate (Fig. 3).
It will take approximately 1
minute for the unit to heat up
and be ready for steaming and
pressing.

4 Holding the fabric steamer in

the vertical position with the
steam nozzle pointing away
from you, press and hold the
steam trigger for continuous
steam and begin steaming
your garments in a vertical or
horizontal motion. Begin at the
top of the garment and move in
a downward direction pressing

Filling and refilling the water
reservoir:

1 Never fill the fabric steamer

while it is plugged into an
electrical outlet. Disconnect the
power cord before refilling.

2 Open the water cap and hold

the fabric steamer horizontally
and fill using the filling flask
provided. Be careful not to
overfill. Replace the cap by
pushing it in making sure that it
closes firmly. (Fig. 1)

NOTE: The water tank does not

have to be completely full for
the fabric steamer to generate
steam. However, make sure
that the water tank is at least
half way full for optimal results.

Hold the steam trigger
for continuous steam.
The steam will stop
emiting once you let
go of the button.

Intermittently wipe away
condensation from the
steam guard with extended
use

Practice makes perfect! It
takes time to get used to
and master the garment
steaming techniques.

Always check the fabric
labels for recommendations
from the manufacturer.
Test the fabric in an
inconspicuous part of the
garment such as an inner
seam.

Fig. 1 Fig. 2

Fig. 4

Fig. 5

Fig. 3

GS500_series_IB_ES_100616.indd 10-11 10-06-16 11:46 AM