Shark GS500UKJR User Manual

garment care system

User’s Guide

GS500UKJR

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING YOUR SHARK®

™

PRESS & REFRESH

GARMENT CARE
SYSTEM, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING

™

YOUR PRESS & REFRESH

GARMENT

CARE SYSTEM.

DANGER OF SCALDING

Please use caution when using the garment

™

steamer. The Wrinkle Eraser

pressing bar and

the steam emitted are very hot. The Wrinkle

™

is not controlled by the steam trigger and

Eraser
is hot as long as the unit is turned on and for 30
minutes after the unit has been turned off.

IMPORTANT: This appliance is not intended for
use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
the use of the appliance by a person responsible
for their safety.

1. USE THE SYSTEM ONLY FOR ITS INTENDED

USE AS DESCRIBED IN THIS MANUAL.

2. ONLY USE WATER. To extend the life of your
Press & Refresh

recommend using distilled water especially if you
live in an area with hard tap water.

3. DO NOT add cleaning solutions, scented
perfumes, oils, or any other chemicals to the
water used in this appliance as this may damage
the unit or make it unsafe for use.

4. Use of any substances other than
manufacturer’s recommended accessories will
automatically void your warranty.

5. DO NOT use outdoors.

6. DO NOT leave the appliance unattended when
plugged in.

7. Always unplug the power cord from the
electrical outlet when not in use, when filling
the water tank and before cleaning.

8. DO NOT allow to be used as a toy.

9. DO NOT put any objects into openings or
operate with any opening blocked.

10. DO NOT use on leather, suede, vinyl, plastic or
other delicate steam sensitive materials. Always
determine the colorfastness of any fabric before
using the fabric steamer by testing it on a small
portion of the garment’s underside.

11. This appliance and the accessories become
hot during use. Exercise care when changing
accessories and follow removal and changing
instructions as outlined in the manual. Do not
change frames while the unit is turned on. Turn
the unit off, wait for the Wrinkle Eraser
cool, and then change frames.

12. The garment steamer can be used in a vertical
or horizontal motion. NEVER hold the steam
head down while at rest or tilt it in a backward
position as this may result in discharge.

™

Garment Care System, we

™

to

2

www.pressandrefresh.co.uk

13. When cleaning the garment steamer, unplug the
power cord and clean with a dry or damp cloth.
DO NOT pour water on the unit or use alcohol,
benzene or paint thinner on the unit.

14. NEVER attempt to steam clothing while it is
being worn.

15. To protect against a risk of fire, electric shock,
or injury:

a. To avoid circuit overload, DO NOT operate

another appliance on the same socket
(circuit) as the fabric steamer.

b. DO NOT immerse any part of the system in

water or other liquids.

c. DO NOT pull power cord to disconnect

from outlet; instead, grasp plug and pull to
disconnect.

d. DO NOT use extension cords or outlets with

inadequate current carrying capacity. If
an extension cord is absolutely necessary,
use a 15-ampere cord. Cords rated for
less amperage may overheat. Use care to
arrange the cord so that it cannot be pulled
or tripped over.

e. DO NOT operate the system with a

damaged cord or plug, or if the appliance
or any other part of the system has been
dropped or damaged.

f. DO NOT disassemble or attempt to repair

the fabric steamer. Incorrect reassembly or
repair can cause a risk of electrical shock or
injury to persons when the fabric steamer is
used.

g. DO NOT handle plug or fabric steamer with

wet hands or operate without shoes.

h. DO NOT pull or carry by power cord, use

power cord as a handle, close a door on the
power cord, or pull the power cord around
sharp corners or edges.

i. DO NOT allow power cord to touch hot

surfaces.

j. ALWAYS disconnect system from electrical

outlet when filling the water tank or
emptying and when not in use.

k. NEVER attempt to fill this unit under a

water faucet. Always use the filling flask
that is provided.

l. Never turn the appliance over or on its side

when in use.

m. NEVER aim or direct steam towards people,

animals, or plants. The steam is very hot
and can cause burns. Burns can occur from
touching hot metal parts, steam, steam
bonnets or frames.

n. DO NOT operate the product while

under the influence of drugs, alcohol or
medications. Use care when you turn a
steam appliance upside down - there may be
hot water in the reservoir.

o. DO NOT operate in the presence of

explosive and/or flammable fumes.

p. Store your appliance indoors in a cool, dry

area out of the reach of children.

q. Keep your work area well lit.

r. Let the system cool completely before

putting away. Loop cord loosely around the
appliance when storing.

s. Keep out of the reach of children.

SAVE THESE
INSTRUCTIONS

www.pressandrefresh.co.uk

3

Welcome to the next wave of garment care!

The Press & Refresh™ Garment Care System brings your fabrics back to life with fewer trips to the
dry cleaners! For the first time ever professional steam power in a portable unit.

The professional steam deeply penetrates fibers, renews and freshens fabric. The exclusive heated
Wrinkle Eraser™ presses for a crisp finish and dries fibers to prevent re-wrinkling.

Extend the life of your garments and go from not quite ready-to-wear to ready-to-wear in one easy step.
The Look Your Best Guide provides step-by-step tips for all of your garment care needs.

Attaching the appropriate
accessory:

The unit comes assembled with a
small steam bonnet frame attached.
The frame must be attached at all
times when the unit is being used.

1 Attach the desired frame

2 Using both hands, hold the

frame on either side. Attach
the top of the frame to the
unit above the Wrinkle Eraser™

FRAME/ACCESSORY

Small Steam Bonnet Frame

Bristle Brush Frame

Lint Brush Frame

into the notch. Next, secure
the pointed end of the frame
around the bottom of the unit
and snap into place (Fig. 1).
The seam of the frame must
line up against the seam of the
unit for proper use.

3 To remove the frame, gently

pull on the pointed end and lift
the frame off the unit.

Fig. 1

TIP: Wipe away condensation

from the steam guard on the
bottom of the frame after
extended use.

Upholstery/Delicate
Fabric Frame & Delicate Steam Bonnet

Upholstery/Delicate
Fabric Frame & Upholstery Steam Bonnet

4

www.pressandrefresh.co.uk

Fig. 2

Helpful Tips on using the
Vertical Press Pad and VELCRO
Clips:

1 For the first time ever, the

vertical press pad eliminates the
need for an ironing board. It is
designed to fit on any size door,
and can remain setup for your
convenience. The VELCRO
are used to position & stretch

USE FOR

The bonnet frame should always be
attached during any use and with any
frame

Best for: cotton, wool, linen, denim

Best for: cotton, wool, rayon, polyester,
silk, satin, cashmere and blends

Best for: lace, velvet, silk, satin,
embelished or delicate garments

®

clips

the garment for quick steaming

®

with better results to complete
the garment care system
(Fig. 2).

2 To make pressing easier, the

vertical press pad has two hooks
on either end to hang your
garment from for larger pressing
surface.

BENEFITS

The specially designed multi layered
honeycomb pad protects fabrics from
water marks and water impurities

Improves steam penetration on heavy
fabrics without leaving water marks

Removes lint, pet hair, and other debris
while steaming and pressing

Specifically designed to protect delicate
fabric from high heat

Best for: bedding, mattress, curtains,
baby bedding, plush toys, high chairs,
car seats, sofa and arm chairs

Shaggy material acts like multiple fingers to
pick up dust and deodorise while steaming.
It provides a large pocket of hot steam

www.pressandrefresh.co.uk

5